Function: A relation where each input (domain element) is paired with exactly one output (range element).
Function notation: \(f(x)\) represents the output when x is the input.
- Replace x with the given value
- Perform the indicated operations
- Simplify to find the output
Substitute \(x = 4\) into the function: \(f(4) = 3(4) - 2\)
\(f(4) = 12 - 2 = 10\)
This means when the input is 4, the output is 10.
\(f(x) = 3x - 2\) means "f of x equals 3x minus 2"
\(f(4) = 10\) means the ordered pair (4, 10) is on the graph of the function
Relation: \(\{(1, 2), (2, 3), (3, 2), (4, 5)\}\)
Domain elements: {1, 2, 3, 4}
Range elements: {2, 3, 5}
For a relation to be a function, each domain element must map to exactly one range element
• Input 1 → Output 2 (unique)
• Input 2 → Output 3 (unique)
• Input 3 → Output 2 (unique)
• Input 4 → Output 5 (unique)
Notice that the output 2 appears twice, but for different inputs (1 and 3)
This is allowed in functions - different inputs can have the same output
What's not allowed is one input having multiple outputs
If we graphed these points, no vertical line would pass through more than one point
This confirms it's a function
\(f(4) = 10\), meaning when the input is 4, the output is 10. The given relation is a function because each input maps to exactly one output.
• Function definition: Each input has exactly one output
• Function evaluation: Substitute and simplify
• Vertical line test: No vertical line intersects graph at more than one point
| x | y |
|---|---|
| -2 | 4 |
| 0 | 1 |
| 1 | 3 |
| 0 | -1 |
Function from table: A table represents a function if no x-value appears more than once with different y-values.
From the table: \(\{(-2, 4), (0, 1), (1, 3), (0, -1)\}\)
Domain = \{-2, 0, 1\} (all x-values)
Note: Even though 0 appears twice in the table, it's only listed once in the domain
Range = \{4, 1, 3, -1\} (all y-values)
Examine if any x-value maps to multiple y-values
• x = -2 → y = 4 (OK)
• x = 0 → y = 1 AND y = -1 (PROBLEM!)
• x = 1 → y = 3 (OK)
A function requires each input to have exactly one output
Since x = 0 maps to both y = 1 and y = -1, this violates the function definition
This table does NOT represent a function because the input 0 has two different outputs
This table does not represent a function because the input value 0 corresponds to two different output values (1 and -1).
• Function property: Each domain element maps to exactly one range element
• Domain: Set of all input values
• Range: Set of all output values
Vertical line test: A graph represents a function if and only if no vertical line intersects the graph at more than one point.
Imagine drawing vertical lines anywhere on the graph
If any vertical line touches the graph at more than one point, it's not a function
Description: Parabola opening upward with vertex at (0, -2)
This is the graph of \(y = x^2 - 2\)
• Left of the y-axis: Vertical lines intersect the parabola once
• On the y-axis: Vertical line at x = 0 intersects at (0, -2) once
• Right of the y-axis: Vertical lines intersect the parabola once
Focus on where the graph changes direction (vertex at (0, -2))
Even at the vertex, the vertical line x = 0 intersects the graph at only one point
For any value of x, there is exactly one corresponding y-value
For example: If x = 3, then y = 3² - 2 = 7 (only one y-value)
Since no vertical line intersects the graph at more than one point, this graph represents a function
Yes, the graph represents a function because it passes the vertical line test - no vertical line intersects the graph at more than one point.
• Vertical line test: Primary method for graphical functions
• Parabolas: Opening upward or downward pass the test
• One-to-one correspondence: Each x-value has exactly one y-value
Function: A relation where each element in the domain corresponds to exactly one element in the range.
Domain: The set of all possible input values (x-values).
Range: The set of all possible output values (y-values).
Function notation: \(f(x)\) represents the output when x is the input.
- Ordered pairs: Check if any x-value appears with different y-values
- Table: Verify each input has only one output
- Graph: Apply the vertical line test
- Equation: Solve for y and check if each x yields one y
Real-world function: A function that models a practical situation with meaningful inputs and outputs.
Let n = number of tickets purchased (input)
Let C(n) = total cost in dollars (output)
Cost per ticket = $50
Total cost = (Cost per ticket) × (Number of tickets)
\(C(n) = 50n\)
For any number of tickets n, there is exactly one total cost C(n)
For example: If n = 3, then C(3) = 50(3) = $150 (only one possible cost)
Mathematically: n could be any real number ≥ 0
Contextually: Must be a non-negative integer (can't buy negative or fractional tickets)
Domain: \(\{0, 1, 2, 3, ...\}\) or \(\{n \in \mathbb{Z} | n \geq 0\}\)
Since C(n) = 50n and n is a non-negative integer
Range: \(\{0, 50, 100, 150, 200, ...\}\)
Or in set notation: \(\{C(n) \in \mathbb{Z} | C(n) \geq 0 \text{ and } C(n) \text{ is a multiple of 50}\}\)
This function shows that cost increases linearly with the number of tickets
Each additional ticket adds $50 to the total cost
n = 0: C(0) = 50(0) = $0 (no tickets, no cost)
n = 1: C(1) = 50(1) = $50 (one ticket costs $50)
n = 4: C(4) = 50(4) = $200 (four tickets cost $200)
The function \(C(n) = 50n\) represents the total cost, where n is the number of tickets. The domain is all non-negative integers, and the range is all non-negative multiples of 50.
• Variable definition: Clearly define what each variable represents
• Context matters: Consider practical constraints when determining domain/range
• Verification: Check that sample inputs produce expected outputs
Function composition: Applying one function to the result of another function, denoted as \((g \circ f)(x) = g(f(x))\).
A 20% discount means the customer pays 80% of the original price
\(f(x) = x - 0.20x = 0.80x\) or \(f(x) = 0.8x\)
A 10% sales tax means paying the price plus 10% of that price
\(g(x) = x + 0.10x = 1.10x\) or \(g(x) = 1.1x\)
\(g(f(x)) = g(0.8x)\)
Apply g to the input 0.8x: \(g(0.8x) = 1.1(0.8x) = 0.88x\)
\(g(f(x))\) represents the final price after applying the discount and then adding tax
It's the composite function that takes the original price and returns the final cost
For any positive input x, \(g(f(x)) = 0.88x\) produces exactly one output
This confirms it's a function
Let x = $100 (original price)
Step 1: Apply discount: \(f(100) = 0.8(100) = $80\)
Step 2: Apply tax: \(g(80) = 1.1(80) = $88\)
Direct calculation: \(g(f(100)) = 0.88(100) = $88\) ✓
The final price is 88% of the original price
This means the net effect is equivalent to a 12% discount
(100% - 88% = 12%)
\(g(f(x)) = 0.88x\), which represents the final price of an item after a 20% discount followed by a 10% sales tax.
• Function composition: Apply functions in order from inside out
• Percent calculations: Convert percentages to decimals for computation
• Verification: Check with specific values to confirm correctness
Function: A special type of relation where each input value (x) is associated with exactly one output value (y).
Domain: The set of all possible input values for which the function is defined.
Range: The set of all possible output values that result from using the function.
Function notation: A concise way to represent functions using symbols like \(f(x)\), \(g(x)\), etc.
- Algebraic: Solve equation for y and check if each x yields one y
- Tabular: Examine tables for repeated x-values with different y-values
- Graphical: Apply vertical line test to check for multiple intersections
- Set of pairs: Verify each first element appears only once
• Uniqueness: Each domain element maps to exactly one range element
• Notation: f(x) represents the output for input x
• Representation: Functions can be shown as equations, tables, graphs, or sets of ordered pairs
• Operations: Functions can be combined through arithmetic operations and composition
Function Representation Forms:
- Algebraic: Using equations like f(x) = 2x + 3
- Tabular: Using input-output tables
- Graphical: Using plots with the vertical line test
- Verbal: Describing relationships in words
- Set of Pairs: Listing ordered pairs like {(1,2), (3,4)}