Solved Exercises on Graphing Linear Inequalities

Master graphing linear inequalities: boundary lines, shading regions, and verifying solutions through these 3 detailed exercises.

Solution: Exercises 1 to 3
1 Boundary Line with Shading
Exercise 1
Graph the inequality: \(y \leq 2x + 3\)
Definition:

Linear inequality: An inequality that can be written in the form ax + by < c, ax + by ≤ c, ax + by > c, or ax + by ≥ c.

Graphing method:
  1. Graph the boundary line (replace inequality with equality)
  2. Determine if the line is solid (≤ or ≥) or dashed (< or >)
  3. Test a point not on the line to determine which side to shade
  4. Shade the appropriate region
Inequality
\(y \leq 2x + 3\)
Boundary
\(y = 2x + 3\)
Line Type
Solid
Step 1: Graph the boundary line

Graph the line \(y = 2x + 3\) using slope = 2 and y-intercept = 3

Step 2: Determine line type

Since the inequality is ≤ (includes equals), draw a solid line to indicate points on the line are part of the solution.

Step 3: Test a point

Test the origin (0, 0): \(0 \leq 2(0) + 3\) → \(0 \leq 3\) ✓

Step 4: Shade the region

Since (0, 0) satisfies the inequality, shade the region containing (0, 0) - below the line.

Step 5: Verify with additional point

Test (1, 1): \(1 \leq 2(1) + 3 = 5\) ✓

The shaded region below the line \(y = 2x + 3\) represents all solutions to \(y \leq 2x + 3\)
Final answer:

The graph consists of the solid line \(y = 2x + 3\) and the region below it shaded.

Applied rules:

• Solid Line: Use for ≤ or ≥ (includes boundary points)

• Dashed Line: Use for < or > (excludes boundary points)

• Test Point: Any point not on the boundary line to determine shading

2 Strict Inequality
Exercise 2
Graph the inequality: \(3x - 2y > 6\)
Definition:

Strict inequality: An inequality using < or > (not including the boundary line).

Inequality
\(3x - 2y > 6\)
Boundary
\(3x - 2y = 6\)
Line Type
Dashed
Step 1: Rewrite in slope-intercept form

\(3x - 2y > 6\) → \(-2y > -3x + 6\) → \(y < \frac{3}{2}x - 3\)

Step 2: Graph the boundary line

Graph \(y = \frac{3}{2}x - 3\) with slope = 3/2 and y-intercept = -3

Step 3: Determine line type

Since the original inequality is strict (>), draw a dashed line to indicate points on the line are NOT part of the solution.

Step 4: Test a point

Test the origin (0, 0): \(3(0) - 2(0) > 6\) → \(0 > 6\) ✗

Step 5: Shade the region

Since (0, 0) does NOT satisfy the inequality, shade the region NOT containing (0, 0) - above the line.

Step 6: Verify with additional point

Test (4, 0): \(3(4) - 2(0) = 12 > 6\) ✓

The shaded region above the dashed line \(y = \frac{3}{2}x - 3\) represents all solutions to \(3x - 2y > 6\)
Final answer:

The graph consists of the dashed line \(3x - 2y = 6\) and the region above it shaded.

Applied rules:

• Strict Inequality: Points on the boundary line are NOT included in the solution

• Dashed Line: Indicates exclusion of boundary points

• Direction Change: When dividing by negative, flip inequality sign

3 Vertical and Horizontal Lines
Exercise 3
Graph the inequality: \(x \geq -2\)
Definition:

Vertical line: A line of the form x = a, where a is a constant. Horizontal line: A line of the form y = b, where b is a constant.

Inequality
\(x \geq -2\)
Boundary
\(x = -2\)
Line Type
Solid
Step 1: Graph the boundary line

Graph the vertical line x = -2 (a line parallel to the y-axis passing through (-2, 0))

Step 2: Determine line type

Since the inequality is ≥ (includes equals), draw a solid line to indicate points on the line are part of the solution.

Step 3: Test a point

Test the origin (0, 0): \(0 \geq -2\) ✓

Step 4: Shade the region

Since (0, 0) satisfies the inequality, shade the region containing (0, 0) - to the right of the line.

Step 5: Understand the solution

All points with x-coordinate greater than or equal to -2 satisfy the inequality.

The shaded region to the right of the solid vertical line x = -2 represents all solutions to \(x \geq -2\)
Final answer:

The graph consists of the solid vertical line x = -2 and the region to its right shaded.

Applied rules:

• Vertical Line: x = a is a vertical line passing through (a, 0)

• Horizontal Line: y = b is a horizontal line passing through (0, b)

• Shading Direction: For x ≥ a, shade to the right; for x ≤ a, shade to the left

Rules and methods, laws,...
\(ax + by \, \square \, c\)
General Linear Inequality
≤ or ≥
Solid Line
Includes boundary
< or >
Dashed Line
Excludes boundary
Test Point
Check region
Determine shading
Key definitions:

Linear inequality: An inequality involving linear expressions in two variables.

Boundary line: The line obtained by replacing the inequality symbol with an equals sign.

Solution region: The area of the coordinate plane that contains all points satisfying the inequality.

Half-plane: The region on one side of a line in the coordinate plane.

Complete methodology:
  1. Standard form: Write inequality in standard form if needed
  2. Boundary line: Graph the corresponding equation
  3. Line type: Solid for ≤ or ≥, dashed for < or >
  4. Test point: Select a point not on the line
  5. Substitute: Check if point satisfies the inequality
  6. Shade: Shade appropriate half-plane based on test
Tip 1: Always use the origin (0,0) as a test point unless it's on the boundary line.
Tip 2: For y < mx + b, shade below the line; for y > mx + b, shade above.
Tip 3: For x < a, shade to the left; for x > a, shade to the right.
Tip 4: Remember to flip the inequality sign when multiplying or dividing by a negative number.
Common errors: Wrong line type (solid vs dashed), incorrect shading, flipping inequality signs incorrectly.
Exam preparation: Practice identifying boundary line types, master test point method, review special cases (vertical/horizontal lines).
Key Concepts and Special Cases
\(\text{Inequality Sign} \Rightarrow \text{Shading Direction}\)
Sign-to-Shade Relationship
y < mx + b
Below Line
Shade down
y > mx + b
Above Line
Shade up
x < a
Left Side
Shade left
Special Cases:

Vertical lines: x = a creates boundaries parallel to y-axis

Horizontal lines: y = b creates boundaries parallel to x-axis

Origin test: (0,0) is convenient unless it's on the boundary

Coordinate plane division: Each line divides the plane into two half-planes

Special Case Handling:
  1. Vertical lines: x = a has undefined slope, shade left/right based on inequality
  2. Horizontal lines: y = b has zero slope, shade up/down based on inequality
  3. Origin on boundary: Use alternative test point like (1,0) or (0,1)
  4. Fractional coefficients: Convert to integer coefficients if helpful
Tip 1: For vertical lines x = a, shade right for x > a, left for x < a.
Tip 2: For horizontal lines y = b, shade above for y > b, below for y < b.
Tip 3: Always verify your shading with a test point in the shaded region.
Tip 4: Remember that the solution region includes infinitely many points.
Geometric Interpretation: Linear inequalities divide the plane into half-planes, with the boundary line separating them.
Algebraic Connection: Graphing provides visual confirmation of algebraic solutions.
Important Properties:

• Boundary Inclusion: Solid lines include boundary points, dashed exclude them

• Half-Plane Property: Every linear inequality defines a half-plane

• Convexity: Solution regions are convex sets

• Continuity: Solution regions are continuous areas

Detailed Summary: Graphing Linear Inequalities

Definitions of Key Concepts:

Linear Inequality: An inequality that can be written in the form ax + by < c, ax + by ≤ c, ax + by > c, or ax + by ≥ c, where a and b are not both zero.

Boundary Line: The line obtained by replacing the inequality symbol with an equals sign. It separates the coordinate plane into two half-planes.

Solution Region: The area of the coordinate plane that contains all ordered pairs (x, y) that satisfy the inequality.

Half-Plane: One of the two regions created when a line divides the coordinate plane.

Test Point: A point used to determine which half-plane contains the solutions to the inequality.

Core Rules and Principles:

Line Type Rule: Use a solid line for ≤ or ≥ (includes boundary points), and a dashed line for < or > (excludes boundary points).

Shading Rule: After testing a point, shade the half-plane that contains points satisfying the inequality.

Direction Rule: For y < mx + b, shade below the line; for y > mx + b, shade above the line.

Sign Flip Rule: When multiplying or dividing both sides of an inequality by a negative number, flip the inequality sign.

Step-by-Step Methods and Procedures:

  1. Identify the boundary line: Replace the inequality symbol with an equals sign to get the boundary equation.
  2. Determine line type: Draw a solid line for ≤ or ≥, dashed for < or >.
  3. Graph the boundary line: Use slope-intercept form or intercepts to plot the line.
  4. Select a test point: Choose a point not on the boundary line (often (0,0) if it's not on the line).
  5. Substitute and evaluate: Plug the test point into the original inequality to see if it's true or false.
  6. Shade appropriately: If the test point satisfies the inequality, shade that side of the line; otherwise, shade the other side.
  7. Verify: Check that a point in the shaded region satisfies the original inequality.

Examples from Simple to Advanced:

Simple Example: y < x + 2 - Boundary: y = x + 2 (dashed line) - Test (0,0): 0 < 0 + 2 → 0 < 2 ✓ - Shade below the line

Intermediate Example: 2x - 3y ≥ 6 - Boundary: 2x - 3y = 6 (solid line) - Rewrite: y ≤ (2/3)x - 2 - Test (0,0): 0 ≤ 0 - 2 → 0 ≤ -2 ✗ - Shade above the line

Advanced Example: |x| + |y| ≤ 4 - This creates a diamond-shaped region bounded by four linear inequalities - Requires understanding absolute value relationships - Solution region is inside the diamond formed by x + y = 4, x - y = 4, -x + y = 4, -x - y = 4

Tips, Tricks, and Common Pitfalls:

Tips:

  • Always use (0,0) as a test point unless it's on the boundary line
  • For y < mx + b, remember "less than means shade low"
  • For x < a, shade to the left of the vertical line
  • Check your work by verifying that points in the shaded region satisfy the inequality

Common Pitfalls:

  • Using the wrong line type (solid vs dashed)
  • Shading the wrong side of the boundary line
  • Forgetting to flip the inequality sign when dividing by negative numbers
  • Choosing a test point that lies on the boundary line

Tricks:

  • For y > mx + b, shade the side containing higher y-values
  • For x > a, shade to the right of the vertical line
  • Remember that the boundary line is part of the solution only for ≤ and ≥
  • Use different colored pencils for multiple inequalities to distinguish regions

Key Notes for Memorization:

Line Types: ≤ and ≥ → Solid line, < and > → Dashed line

Shading Direction: For y < mx + b → shade below, y > mx + b → shade above

Test Point Strategy: If test point satisfies inequality → shade that side

Special Cases: Vertical lines (x = a) shade left/right, Horizontal lines (y = b) shade up/down

Learning Strategies:

Start by mastering the basic graphing procedure with simple inequalities. Focus on understanding why we use solid vs dashed lines. Practice with various forms of inequalities (slope-intercept, standard form, vertical/horizontal lines). Connect the algebraic representation to the geometric representation. Use the test point method consistently to develop reliable habits. Work on verifying solutions by checking that points in the shaded region satisfy the original inequality.

Pay special attention to inequalities that require rearrangement, as these often lead to sign flipping errors. Practice with multiple inequalities to understand how solution regions overlap.

Questions & Answers

Question: How do I know which side of the boundary line to shade when the inequality is in standard form?

Answer: The test point method works regardless of the form of the inequality. Here's how:

  1. Graph the boundary line: Convert the inequality to an equation and graph it (solid for ≤ or ≥, dashed for < or >)
  2. Choose a test point: Pick a point not on the boundary line (the origin (0,0) is often easiest if it's not on the line)
  3. Substitute: Plug the coordinates of the test point into the original inequality
  4. Evaluate: If the statement is true, shade the side containing the test point; if false, shade the opposite side

For example, with 2x + 3y < 6, test (0,0): 2(0) + 3(0) < 6 → 0 < 6 ✓, so shade the side containing (0,0).

Alternatively, you can convert to slope-intercept form (y < -⅔x + 2) to see the direction more clearly.

Question: What should I do if the origin (0,0) is on the boundary line?

Answer: If the origin is on the boundary line, you need to choose a different test point. Here are good alternatives:

  • (1, 0): A point on the positive x-axis
  • (0, 1): A point on the positive y-axis
  • (-1, 0): A point on the negative x-axis
  • (0, -1): A point on the negative y-axis

For example, if graphing y ≤ 2x (which passes through (0,0)), test (1,0): 0 ≤ 2(1) → 0 ≤ 2 ✓

Choose any point that is clearly not on the boundary line. The important thing is that the point is easy to substitute into the inequality.

Remember: the test point must be off the boundary line to determine which side contains the solutions.

Question: Why do we flip the inequality sign when multiplying or dividing by a negative number?

Answer: This happens because multiplying or dividing by a negative number reverses the order of numbers on the number line. Consider these examples:

  • We know 3 < 5 is true
  • If we multiply both sides by -1: -3 and -5
  • But -3 is NOT less than -5; actually -3 > -5
  • So we must flip the inequality: -3 > -5

Think of it as reflecting the numbers across zero on the number line. If a < b, then when reflected (multiplied by a negative), the relationship reverses: -a > -b.

This rule applies to all inequality symbols: < becomes >, ≤ becomes ≥, > becomes <, and ≥ becomes ≤.

This is crucial when solving inequalities like -2x > 6, which becomes x < -3 after dividing by -2.