Linear Inequality: An inequality that can be written in the form Ax + By ≤ C, Ax + By ≥ C, Ax + By < C, or Ax + By > C
Boundary Line: The line formed by replacing the inequality symbol with an equals sign
Solid Line: Used for ≤ or ≥ inequalities (includes boundary points)
Dashed Line: Used for < or > inequalities (excludes boundary points)
1. Rewrite inequality in slope-intercept form (y = mx + b)
2. Graph the boundary line (solid for ≤, ≥; dashed for <, >)
3. Choose a test point not on the boundary line
4. Substitute test point coordinates into original inequality
5. Shade the region containing the test point if it satisfies the inequality
Replace ≤ with = to get boundary line: y = 2x + 3
This is in slope-intercept form with slope m = 2 and y-intercept b = 3
Since the inequality is ≤ (less than or equal to), use a SOLID line
This means points on the line are included in the solution set
Plot y-intercept (0, 3)
Use slope m = 2 to find another point: from (0, 3), go up 2, right 1 to (1, 5)
Draw solid line through these points
Use origin (0, 0) as test point (not on the line)
Substitute into original inequality: 0 ≤ 2(0) + 3
0 ≤ 3 ✓ (true)
Since the test point (0, 0) satisfies the inequality, shade the region containing the test point
This is the region below the line y = 2x + 3
Test point (1, 1): 1 ≤ 2(1) + 3 → 1 ≤ 5 ✓
Test point (-1, 4): 4 ≤ 2(-1) + 3 → 4 ≤ 1 ✗
This confirms shading is below the line
Shading: Below the line
The graph of y ≤ 2x + 3 includes the solid boundary line y = 2x + 3 and the shaded region below the line. The solution set includes all points that satisfy the inequality.
• Line Type: ≤ or ≥ → solid line; < or > → dashed line
• Shading: Shade region containing true test point
• Test Point: Use point not on boundary line
Standard Form: Ax + By = C format
Slope-Intercept Form: y = mx + b format
Test Point Method: Using a point to determine which side of the boundary line to shade
1. Solve for y: 3x - 2y > 6 → -2y > -3x + 6 → y < (3/2)x - 3
2. Remember: dividing by negative flips inequality sign
3. Graph boundary line y = (3/2)x - 3
4. Use dashed line since inequality is strict (>)
5. Shade appropriately based on test point
Start with: 3x - 2y > 6
Subtract 3x from both sides: -2y > -3x + 6
Divide by -2 (flip inequality sign): y < (3/2)x - 3
Boundary line: y = (3/2)x - 3
Slope: m = 3/2, y-intercept: b = -3
Original inequality is > (strict inequality)
Use DASHED line since points on the line are NOT included
Y-intercept: (0, -3)
Use slope 3/2: from (0, -3), go up 3, right 2 to (2, 0)
Draw dashed line through these points
Use test point (0, 0): 3(0) - 2(0) > 6 → 0 > 6 ✗
This is false, so (0, 0) is NOT in the solution set
Since (0, 0) doesn't satisfy the inequality, shade the opposite side
This is the region above the line y = (3/2)x - 3
Test point (0, -4): 3(0) - 2(-4) > 6 → 8 > 6 ✓
This confirms shading is above the line
Shading: Above the line
The graph of 3x - 2y > 6 includes the dashed boundary line y = (3/2)x - 3 and the shaded region above the line. The solution set includes all points that satisfy the inequality.
• Sign Flipping: Dividing/multiplying by negative flips inequality
• Line Type: Strict inequality (>) → dashed line
• Shading: False test point → shade opposite side
Vertical Line: x = a (form where y is unrestricted)
Horizontal Line: y = b (form where x is unrestricted)
Unrestricted Variable: The variable that can take any value
For x ≥ a: vertical line x = a, shade right (or left if <)
For x ≤ a: vertical line x = a, shade left (or right if >)
For y ≥ b: horizontal line y = b, shade up (or down if <)
For y ≤ b: horizontal line y = b, shade down (or up if >)
Boundary line: x = -2 (vertical line)
Type: Solid line (≥ includes boundary)
Shading: To the right of line (values greater than -2)
Boundary line: y = 4 (horizontal line)
Type: Dashed line (< excludes boundary)
Shading: Below the line (values less than 4)
For x ≥ -2: All points to the right of and on the vertical line x = -2
For y < 4: All points below the horizontal line y = 4
For x ≥ -2: Test point (0, 0): 0 ≥ -2 ✓
For y < 4: Test point (0, 0): 0 < 4 ✓
Point (-3, 5): x ≥ -2? -3 ≥ -2 ✗; y < 4? 5 < 4 ✗
For x ≥ -2: Everything to the right of the vertical line
For y < 4: Everything below the horizontal line
For both: Intersection of the two regions
Vertical lines have undefined slope and equation form x = a
Horizontal lines have slope 0 and equation form y = b
Shading direction is determined by the inequality symbol
y < 4: Horizontal dashed line, shade down
The graph of x ≥ -2 is a vertical solid line at x = -2 with shading to the right. The graph of y < 4 is a horizontal dashed line at y = 4 with shading below. Each represents all points satisfying the respective inequality.
• Vertical Lines: x = a, shade left/right based on inequality
• Horizontal Lines: y = b, shade up/down based on inequality
• Line Type: ≥, ≤ → solid; <, > → dashed
Solid Line: Used for ≤ and ≥ inequalities (boundary points included)
Dashed Line: Used for < and > inequalities (boundary points excluded)
Shading: Determined by test point method
Linear Inequality: An inequality involving linear expressions in two variables that defines a half-plane in the coordinate system.
Boundary Line: The line that separates the coordinate plane into two regions, defined by replacing the inequality symbol with an equals sign.
Solution Region: The area of the coordinate plane that contains all ordered pairs satisfying the inequality.
- Convert to slope-intercept form: Solve for y when possible
- Graph boundary line: Solid for ≤, ≥; dashed for <, >
- Choose test point: Use point not on the boundary line
- Substitute test point: Into original inequality
- Determine shading: Shade region containing true test point
- Verify solution: Test additional points in shaded region
Question: How do I know whether to use a solid or dashed line when graphing linear inequalities?
Answer: The type of line depends on the inequality symbol:
Solid Line: Use when the inequality is ≤ (less than or equal to) or ≥ (greater than or equal to)
This means points ON the boundary line are included in the solution set.
Dashed Line: Use when the inequality is < (less than) or > (greater than)
This means points ON the boundary line are NOT included in the solution set.
Memory Trick: "Equal sign means solid line" - if there's an equal component (≤ or ≥), draw a solid line.
Examples:
- y ≤ 2x + 1 → Solid line
- y < 2x + 1 → Dashed line
- 3x - y ≥ 4 → Solid line
- 3x - y > 4 → Dashed line
Question: How do I determine which side of the boundary line to shade?
Answer: Use the test point method:
Step 1: Choose any point that is NOT on the boundary line
Step 2: Substitute the coordinates of this point into the original inequality
Step 3: If the resulting statement is TRUE, shade the region containing that point
Step 4: If the resulting statement is FALSE, shade the opposite region
Best Test Point: Use the origin (0,0) whenever possible, as it simplifies calculations.
Example: For y > 2x - 1, test (0,0): 0 > 2(0) - 1 → 0 > -1 ✓
Since this is true, shade the region containing (0,0).
Always verify with a second point to be sure!
Question: When do I flip the inequality sign, and why does this happen?
Answer: You must flip the inequality sign when you MULTIPLY or DIVIDE both sides of an inequality by a NEGATIVE number.
Why this happens: Multiplying or dividing by a negative number reverses the order of numbers on the number line.
Example: 3 < 5 (true), but if we multiply both sides by -1: -3 < -5 (false!)
So we must flip the sign: -3 > -5 (true)
When flipping is needed:
- Dividing by negative: -2y > 6 → y < -3 (divide by -2, flip sign)
- Multiplying by negative: y/-3 ≤ 2 → y ≥ -6 (multiply by -3, flip sign)
Important: Do NOT flip the sign when adding or subtracting negative numbers!
This rule is essential when converting inequalities from standard form to slope-intercept form.
Graphing Linear Inequalities Guide
≤ or ≥: Solid line
< or >: Dashed line
Boundary inclusion
Visual distinction
Test point method
True → shade region
False → shade opposite
Verify with extra points
y = mx + b (slope-intercept)
Ax + By = C (standard)
Sign flipping rule
Test point substitution
Half-plane concept
Boundary line
Included/excluded points
Verification process