Solved Exercises on Equations for Exponential Models in Algebra 1

Master exponential model equations: growth, decay, compound interest, and population models through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic exponential growth model
Exercise 1
A population of bacteria starts with 100 bacteria and doubles every hour. Write the exponential equation that models this situation. Find the population after 5 hours and 8 hours.
Definition:

Exponential growth model: A function of the form P(t) = P₀·b^t where P₀ is the initial amount, b is the growth factor (b > 1), and t is time. When a quantity doubles, b = 2.

Exponential model construction method:
  1. Identify the initial amount (P₀)
  2. Determine the growth/decay factor (b)
  3. Identify the time variable (t)
  4. Write the equation in the form P(t) = P₀·b^t
  5. Substitute values to find specific amounts
Model
P(t) = 100·2^t
After 5 hours
3,200 bacteria
After 8 hours
25,600 bacteria
Step 1: Identify the initial amount

The initial population is 100 bacteria
So P₀ = 100

Step 2: Determine the growth factor

The population doubles every hour
Doubling means multiplying by 2
So b = 2

Step 3: Write the exponential equation

Using the form P(t) = P₀·b^t
P(t) = 100·2^t
where t is the number of hours

Step 4: Find population after 5 hours

P(5) = 100·2^5
P(5) = 100·32
P(5) = 3,200 bacteria

Step 5: Find population after 8 hours

P(8) = 100·2^8
P(8) = 100·256
P(8) = 25,600 bacteria

Equation: P(t) = 100·2^t
After 5 hours: 3,200 bacteria
After 8 hours: 25,600 bacteria
Final answer:

The exponential model is P(t) = 100·2^t. After 5 hours there are 3,200 bacteria, and after 8 hours there are 25,600 bacteria.

Applied rules:

• Doubling model: Use base 2 for quantities that double

• Initial value: P₀ is the value when t = 0

• Exponential growth: Base > 1 for growth models

2 Exponential decay model
Exercise 2
A radioactive substance has an initial mass of 500 grams and decays by 10% each year. Write the exponential equation that models this situation. Find the mass after 3 years and 6 years.
Definition:

Exponential decay model: A function of the form A(t) = A₀·b^t where A₀ is the initial amount, b is the decay factor (0 < b < 1), and t is time. The decay factor is 1 - rate of decay.

Model
A(t) = 500·(0.9)^t
After 3 years
364.5 grams
After 6 years
265.7 grams
Step 1: Identify the initial amount

The initial mass is 500 grams
So A₀ = 500

Step 2: Determine the decay factor

The substance decays by 10% each year
This means 90% remains each year
So b = 1 - 0.10 = 0.90

Step 3: Write the exponential equation

Using the form A(t) = A₀·b^t
A(t) = 500·(0.9)^t
where t is the number of years

Step 4: Find mass after 3 years

A(3) = 500·(0.9)^3
A(3) = 500·(0.729)
A(3) = 364.5 grams

Step 5: Find mass after 6 years

A(6) = 500·(0.9)^6
A(6) = 500·(0.531441)
A(6) ≈ 265.7 grams

Equation: A(t) = 500·(0.9)^t
After 3 years: 364.5 grams
After 6 years: 265.7 grams
Final answer:

The exponential model is A(t) = 500·(0.9)^t. After 3 years there are 364.5 grams, and after 6 years there are approximately 265.7 grams.

Applied rules:

• Decay factor: b = 1 - rate (where rate is expressed as a decimal)

• Exponential decay: Base between 0 and 1

• Decay interpretation: 10% decay means 90% remains

3 Compound interest model
Exercise 3
An investment of $1,000 is made at an annual interest rate of 4%, compounded annually. Write the exponential equation that models this situation. Find the value of the investment after 10 years and 20 years.
Definition:

Compound interest model: A function of the form A(t) = P(1 + r)^t where P is the principal, r is the annual interest rate (as a decimal), and t is time in years. This represents exponential growth.

Model
A(t) = 1000·(1.04)^t
After 10 years
$1,480.24
After 20 years
$2,191.12
Step 1: Identify the parameters

Principal (P) = $1,000
Annual interest rate (r) = 4% = 0.04
Time (t) = variable in years

Step 2: Determine the growth factor

For compound interest, the growth factor is (1 + r)
Growth factor = 1 + 0.04 = 1.04

Step 3: Write the exponential equation

Using the compound interest formula A(t) = P(1 + r)^t
A(t) = 1000(1 + 0.04)^t
A(t) = 1000(1.04)^t

Step 4: Find value after 10 years

A(10) = 1000(1.04)^10
A(10) = 1000(1.48024428491834...)
A(10) ≈ $1,480.24

Step 5: Find value after 20 years

A(20) = 1000(1.04)^20
A(20) = 1000(2.19112314303342...)
A(20) ≈ $2,191.12

Step 6: Interpret the results

The investment grows exponentially due to compounding interest. After 10 years, the investment is worth about $1,480, and after 20 years, it's worth about $2,191.

Equation: A(t) = 1000·(1.04)^t
After 10 years: $1,480.24
After 20 years: $2,191.12
Final answer:

The exponential model is A(t) = 1000(1.04)^t. After 10 years the investment is worth $1,480.24, and after 20 years it's worth $2,191.12.

Applied rules:

• Compound interest: A(t) = P(1 + r)^t

• Growth factor: 1 + interest rate

• Exponential growth: Money increases by same percentage each year

Key Concepts, Rules, and Methods
f(t) = a \cdot b^t
General Exponential Model
Growth
b > 1
Increasing function
Decay
0 < b < 1
Decreasing function
Compound Interest
A(t) = P(1+r)^t
Financial growth model
Population Growth
P(t) = P_0 \cdot b^t
Biological growth model
Key definitions:

Exponential model: A mathematical function of the form f(t) = a·b^t where a is the initial value, b is the growth/decay factor, and t is time.

Initial value: The value of the function at time t = 0, which is represented by parameter a in the equation.

Growth factor: The base b in the exponential function, which determines whether the function represents growth (b > 1) or decay (0 < b < 1).

Decay factor: When 0 < b < 1, the function represents exponential decay, and b is specifically called the decay factor.

Rate of change: In exponential models, the rate of change is proportional to the current value, leading to accelerating growth or decelerating decay.

Compounding: The process where interest is added to the principal, and future interest is calculated on the new total, leading to exponential growth.

Half-life: The time required for a quantity to reduce to half its initial value in exponential decay processes.

Exponential model construction methodology:
  1. Identify the scenario: Determine if it's growth or decay
  2. Find initial value: Identify the starting amount
  3. Determine rate: Find the percentage rate of change
  4. Calculate factor: Growth: b = 1 + r, Decay: b = 1 - r
  5. Write equation: Express as f(t) = a·b^t
  6. Verify model: Check that the equation makes sense
  7. Use model: Apply the equation to solve problems
Tip 1: Always convert percentages to decimals before using in equations.
Tip 2: Growth factor = 1 + rate, decay factor = 1 - rate.
Tip 3: Check that your model gives the correct initial value when t = 0.
Tip 4: Verify that growth models show increasing values and decay models show decreasing values.
Common errors: Confusing growth and decay factors, forgetting to convert percentages to decimals, using the wrong base, misidentifying the initial value.
Exam preparation: Master the basic forms, practice converting between percentages and decimals, understand when to use growth vs decay models.
Essential rules to remember:

• Growth model: f(t) = a·b^t where b > 1

• Decay model: f(t) = a·b^t where 0 < b < 1

• Compound interest: A(t) = P(1 + r)^t

• Population models: P(t) = P₀·b^t

• Rate conversion: Always convert percentage to decimal (divide by 100)

Solution: Exercises 4 to 5
4 Population growth model
Exercise 4
The population of a city was 50,000 in 2020 and is growing at a rate of 3% per year. Write the exponential equation that models this situation. Predict the population in 2025 and 2030.
Definition:

Population growth model: A specific application of exponential growth where the population changes by a fixed percentage each time period. The formula is P(t) = P₀(1 + r)^t where P₀ is initial population, r is growth rate, and t is time.

Model
P(t) = 50000·(1.03)^t
In 2025
57,964 people
In 2030
67,196 people
Step 1: Identify the parameters

Initial population (P₀) = 50,000
Growth rate (r) = 3% = 0.03
Growth factor = 1 + r = 1 + 0.03 = 1.03

Step 2: Write the exponential equation

Using the form P(t) = P₀(1 + r)^t
P(t) = 50000(1 + 0.03)^t
P(t) = 50000(1.03)^t
where t represents years since 2020

Step 3: Find population in 2025

Years since 2020: 2025 - 2020 = 5 years
So t = 5
P(5) = 50000(1.03)^5
P(5) = 50000(1.1592740743)
P(5) ≈ 57,964 people

Step 4: Find population in 2030

Years since 2020: 2030 - 2020 = 10 years
So t = 10
P(10) = 50000(1.03)^10
P(10) = 50000(1.343916379344122)
P(10) ≈ 67,196 people

Step 5: Verify the model

When t = 0: P(0) = 50000(1.03)^0 = 50000(1) = 50000 ✓
This confirms our model is correct.

Equation: P(t) = 50000·(1.03)^t
In 2025: 57,964 people
In 2030: 67,196 people
Final answer:

The exponential model is P(t) = 50000(1.03)^t. In 2025 the population will be approximately 57,964 people, and in 2030 it will be approximately 67,196 people.

Applied rules:

• Population growth: P(t) = P₀(1 + r)^t

• Time variable: Define t as years since reference year

• Verification: Check that P(0) = P₀

5 Technology adoption model
Exercise 5
A new smartphone app was downloaded 1,000 times in its first week. The number of downloads is growing by 50% each week. Write the exponential equation that models this situation. Predict the number of downloads after 4 weeks and 6 weeks.
Definition:

Technology adoption model: A growth model where the rate of adoption increases over time, often following an exponential pattern during early adoption phases.

Model
D(t) = 1000·(1.5)^t
After 4 weeks
5,062 downloads
After 6 weeks
11,391 downloads
Step 1: Identify the parameters

Initial downloads (D₀) = 1,000
Growth rate = 50% = 0.50
Growth factor = 1 + 0.50 = 1.50

Step 2: Write the exponential equation

Using the form D(t) = D₀·b^t
D(t) = 1000(1.5)^t
where t represents weeks since launch

Step 3: Find downloads after 4 weeks

D(4) = 1000(1.5)^4
D(4) = 1000(5.0625)
D(4) = 5,062.5 ≈ 5,062 downloads

Step 4: Find downloads after 6 weeks

D(6) = 1000(1.5)^6
D(6) = 1000(11.390625)
D(6) = 11,390.625 ≈ 11,391 downloads

Step 5: Verify the model

When t = 0: D(0) = 1000(1.5)^0 = 1000(1) = 1000 ✓
This confirms our model is correct.

Step 6: Analyze the rapid growth

With a 50% weekly growth rate, the number of downloads increases rapidly. This is typical of successful technology adoption in early phases.

Equation: D(t) = 1000·(1.5)^t
After 4 weeks: 5,062 downloads
After 6 weeks: 11,391 downloads
Final answer:

The exponential model is D(t) = 1000(1.5)^t. After 4 weeks there will be approximately 5,062 downloads, and after 6 weeks there will be approximately 11,391 downloads.

Applied rules:

• High growth rate: 50% growth leads to rapid increase

• Technology adoption: Often follows exponential pattern in early stages

• Model verification: Always check that initial condition is satisfied

Complete List of Laws, Methods, Rules, Definitions, Expressions
f(t) = a \cdot b^t
General Exponential Model
Key definitions:

Exponential function: A function of the form f(t) = a·b^t where a ≠ 0, b > 0, and b ≠ 1. The variable t appears as an exponent.

Exponential growth: When b > 1 in f(t) = a·b^t, the function increases as t increases. The rate of increase becomes larger over time.

Exponential decay: When 0 < b < 1 in f(t) = a·b^t, the function decreases as t increases. The rate of decrease becomes smaller over time.

Initial value: The value of the function when t = 0, which equals a in the equation f(t) = a·b^t.

Growth factor: The base b in an exponential function when it represents growth (b > 1).

Decay factor: The base b in an exponential function when it represents decay (0 < b < 1).

Rate of change: In exponential models, the rate of change is proportional to the current value, leading to accelerating growth or decelerating decay.

Compounding effect: The phenomenon where growth builds upon previous growth, leading to exponential rather than linear increases.

Complete exponential model construction methodology:
  1. Scenario identification: Determine if situation involves growth or decay
  2. Parameter extraction: Identify initial value, rate of change, and time units
  3. Factor calculation: For growth: b = 1 + r; for decay: b = 1 - r
  4. Equation formulation: Write in the form f(t) = a·b^t
  5. Model verification: Check that f(0) = initial value
  6. Application: Use the model to make predictions
  7. Interpretation: Explain results in the context of the problem
Tip 1: Always convert percentages to decimals before using in equations (divide by 100).
Tip 2: Remember that growth factor = 1 + rate and decay factor = 1 - rate.
Tip 3: Check that your model gives the correct initial value when t = 0.
Tip 4: Verify that growth models show increasing values and decay models show decreasing values.
Tip 5: Be careful with time units and ensure they match the rate period.
Common error patterns: Forgetting to convert percentages to decimals, using wrong formula for growth vs decay, misidentifying initial value, incorrect time units, arithmetic errors in exponent calculations.
Advanced considerations: Continuous growth models (e^rt), logistic growth models, real-world constraints on exponential growth, and the difference between theoretical and practical models.
Comprehensive exponential model formulas:

• General form: f(t) = a·b^t

• Growth model: f(t) = a(1 + r)^t where r > 0

• Decay model: f(t) = a(1 - r)^t where r > 0

• Compound interest: A(t) = P(1 + r)^t

• Population growth: P(t) = P₀(1 + r)^t

• Radioactive decay: A(t) = A₀(1 - r)^t

• Doubling model: f(t) = a·2^t

• Halving model: f(t) = a·(1/2)^t

Detailed Summary: Equations for Exponential Models

Key Concepts and Definitions

Exponential Model: A mathematical function of the form f(t) = a·b^t where a is the initial value, b is the growth/decay factor, and t is time. The variable t appears in the exponent position.

Initial Value (a): The value of the function when t = 0. This represents the starting amount in the real-world situation being modeled.

Growth Factor (b): The base of the exponential function when it represents growth (b > 1). This is calculated as 1 + rate, where the rate is expressed as a decimal.

Decay Factor (b): The base of the exponential function when it represents decay (0 < b < 1). This is calculated as 1 - rate, where the rate is expressed as a decimal.

Exponential Growth: A situation where a quantity increases by the same percentage over equal time intervals. The function has the form f(t) = a·b^t where b > 1.

Exponential Decay: A situation where a quantity decreases by the same percentage over equal time intervals. The function has the form f(t) = a·b^t where 0 < b < 1.

Rate of Change: In exponential models, the rate of change is proportional to the current value, meaning the quantity changes by the same percentage each time period rather than by the same absolute amount.

Core Rules and Properties

Growth vs Decay Rule: If b > 1, the function represents exponential growth; if 0 < b < 1, it represents exponential decay.

Rate Conversion Rule: Always convert percentage rates to decimals by dividing by 100 before using in equations.

Factor Calculation: Growth factor = 1 + rate; Decay factor = 1 - rate (where rate is expressed as a decimal).

Initial Value Property: f(0) = a·b^0 = a·1 = a, so the initial value is always the coefficient a.

Compounding Effect: In exponential growth, the increase becomes larger over time because each period's growth is calculated on a larger base.

Asymptotic Behavior: Exponential decay approaches zero but never reaches it; exponential growth increases without bound.

Step-by-Step Methods and Procedures

Constructing Exponential Models:

  1. Identify the real-world situation (growth or decay)
  2. Extract the initial value (a) from the problem
  3. Identify the rate of change as a percentage
  4. Convert the percentage to a decimal
  5. Calculate the growth/decay factor: b = 1 ± rate
  6. Write the equation in the form f(t) = a·b^t
  7. Define the time variable t (including units)
  8. Verify the model by checking f(0) = a

Using Exponential Models:

  1. Identify the time value needed (t)
  2. Substitute t into the equation
  3. Calculate the exponential expression
  4. Multiply by the initial value
  5. Interpret the result in context

Verifying Exponential Models:

  1. Check that the initial value matches f(0)
  2. Verify that growth models increase and decay models decrease
  3. Confirm that the rate of change matches the problem description
  4. Check that units and time periods are consistent

Examples: Simple to Advanced

Simple Example:

Population: P(t) = 100·2^t (doubling each time period)

After 3 periods: P(3) = 100·2³ = 100·8 = 800

Intermediate Example:

Investment: A(t) = 1000·(1.05)^t (5% annual interest)

After 10 years: A(10) = 1000·(1.05)^10 ≈ $1,629

Advanced Example:

Decay: A(t) = 500·(0.9)^t (10% decay per time period)

After 5 periods: A(5) = 500·(0.9)^5 ≈ 295.25

Tips, Tricks, and Common Pitfalls

Tips and Tricks:

  • Memory Device: "Growth adds, decay subtracts" - Growth factor is 1 + rate, decay factor is 1 - rate
  • Decimal Conversion: Always convert percentages to decimals (divide by 100) before using in equations
  • Verification Check: Always verify that f(0) equals the initial value
  • Time Consistency: Ensure time units match the rate period (annual rate means t in years)

Common Pitfalls:

  • Forgetting to convert percentages to decimals
  • Mixing up growth and decay factors
  • Using the wrong time units
  • Arithmetic errors in exponent calculations
  • Not checking that the model makes sense in context

Key Notes and Takeaways for Memorization

  • GENERAL FORM: f(t) = a·b^t
  • GROWTH: b = 1 + r (where r is the rate as decimal)
  • DECAY: b = 1 - r (where r is the rate as decimal)
  • INITIAL VALUE: f(0) = a
  • PERCENT TO DECIMAL: Divide by 100
  • GROWTH CONDITION: b > 1
  • DECAY CONDITION: 0 < b < 1

Questions & Answers

Question: How do I know whether to use (1 + r) or (1 - r) in an exponential model?

Answer: The choice depends on whether the quantity is increasing or decreasing:

Use (1 + r) for growth: When the quantity is increasing by r% each time period. For example, if a population grows by 3% each year, the growth factor is 1 + 0.03 = 1.03.

Use (1 - r) for decay: When the quantity is decreasing by r% each time period. For example, if a car depreciates by 5% each year, the decay factor is 1 - 0.05 = 0.95.

A quick way to remember: if the situation involves growth, addition makes sense (1 + r); if it involves decay, subtraction makes sense (1 - r). Also, the factor should always be positive, and for growth it should be greater than 1, for decay it should be between 0 and 1.

Question: Why do exponential models represent so many real-world phenomena?

Answer: Exponential models represent many real-world phenomena because they capture situations where the rate of change is proportional to the current value:

Growth situations: Population growth, compound interest, and viral spread all follow this pattern because more individuals/amounts lead to more growth in the next time period.

Decay situations: Radioactive decay, drug elimination, and depreciation follow this pattern because less material/substance remains to cause further decay.

This "self-reinforcing" or "self-reducing" nature makes exponential functions ideal for modeling processes where the change depends on the current state of the system. The rate of change is not constant (like in linear models) but rather proportional to the current value.

Question: How do I verify that my exponential model is correct?

Answer: There are several ways to verify your exponential model:

Initial value check: Substitute t = 0 into your equation. You should get f(0) = a, which should equal the initial value given in the problem.

Rate verification: Calculate the value after one time period and verify it matches the expected change. For example, if something grows by 10%, after one period it should be 110% of the initial value.

Behavior check: Make sure your model shows growth (increasing) or decay (decreasing) as appropriate for the situation.

Reality check: Verify that your predictions make sense in the real-world context. Unreasonably large or small values may indicate an error.

For example, if your model is P(t) = 100(1.05)^t for population, then P(0) = 100(1.05)^0 = 100(1) = 100, which matches the initial population of 100.