Domain: The set of all possible input values (x-values) for which a function is defined.
Range: The set of all possible output values (y-values) that a function can produce.
- Identify any restrictions on the input values
- Consider the function type and its behavior
- Determine the domain based on restrictions
- Analyze the function's output behavior to find the range
- Express results using set notation or interval notation
f(x) = 3x - 2 is a linear function (polynomial of degree 1)
There are no denominators, square roots, or logarithms that would restrict the domain
No restrictions exist, so domain is all real numbers
Domain: (-∞, ∞) or {x | x ∈ ℝ}
As x approaches -∞, f(x) approaches -∞
As x approaches ∞, f(x) approaches ∞
Since it's a linear function with positive slope, it covers all y-values
Range: (-∞, ∞) or {y | y ∈ ℝ}
| x | f(x) = 3x - 2 |
|---|---|
| -2 | 3(-2) - 2 = -8 |
| -1 | 3(-1) - 2 = -5 |
| 0 | 3(0) - 2 = -2 |
| 1 | 3(1) - 2 = 1 |
| 2 | 3(2) - 2 = 4 |
Range: (-∞, ∞)
Domain: (-∞, ∞). Range: (-∞, ∞). Both domain and range include all real numbers.
• Linear functions: Have domain and range of all real numbers unless restricted
• No restrictions: Polynomial functions have unrestricted domains
• Continuity: Linear functions are continuous over their entire domain
Restricted domain: A domain that is limited to a specific subset of all possible values.
Given: -1 ≤ x ≤ 4, or [-1, 4]
At x = -1: f(-1) = -2(-1) + 5 = 2 + 5 = 7
At x = 4: f(4) = -2(4) + 5 = -8 + 5 = -3
Since f(x) = -2x + 5 has negative slope (-2), the function is decreasing
Maximum value occurs at x = -1: f(-1) = 7
Minimum value occurs at x = 4: f(4) = -3
Since the function is continuous and decreasing on [-1, 4]
The range is all values from -3 to 7, inclusive
Range: [-3, 7]
| x | f(x) = -2x + 5 |
|---|---|
| -1 | 7 (maximum) |
| 0 | 5 |
| 2 | 1 |
| 4 | -3 (minimum) |
Range: [-3, 7]
Domain: [-1, 4]. Range: [-3, 7]. The function outputs values from -3 to 7 when x is between -1 and 4.
• Restricted domain: Only consider values within the given range
• Endpoint evaluation: Evaluate function at endpoints to find range extremes
• Slope direction: Negative slope means decreasing function
Contextual domain: A domain that is determined by the practical limitations of a real-world situation.
The company operates between 0 and 8 hours per day
Therefore: 0 ≤ h ≤ 8
Domain: [0, 8] (hours of operation)
Cannot have negative hours or more than 8 hours per day
At h = 0: C(0) = 15(0) = 0 (no hours = no cost)
At h = 8: C(8) = 15(8) = 120 (8 hours = $120)
Since C(h) = 15h has positive slope (15), the function is increasing
As hours increase, cost increases proportionally
Since the function is continuous and increasing on [0, 8]
The range is all values from 0 to 120, inclusive
Range: [0, 120]
| Hours (h) | Cost C(h) = 15h |
|---|---|
| 0 | $0 (minimum) |
| 2 | $30 |
| 4 | $60 |
| 6 | $90 |
| 8 | $120 (maximum) |
Range: [0, 120]
Domain: [0, 8] hours. Range: [0, 120] dollars. The company can operate 0 to 8 hours, resulting in costs from $0 to $120.
• Context matters: Real-world constraints limit the domain
• Practical limits: Negative values may not make sense
• Proportional relationships: Positive slope indicates direct relationship
Complete Summary: Determining Domain and Range for Linear Functions
Domain: The set of all possible input values (x-values) for which a function is defined.
Range: The set of all possible output values (y-values) that a function can produce.
Interval notation: A way to represent sets of numbers using intervals: (a,b), [a,b], (a,b], [a,b).
Set notation: Using curly braces to describe sets: {x | condition}.
Contextual domain: Domain determined by practical limitations of a real-world situation.
Domain restrictions: Denominators cannot be zero, even roots require non-negative radicands, logarithms require positive arguments.
Range determination: Analyze function behavior, find min/max values, consider continuity.
Graphical approach: Domain = x-values covered, Range = y-values covered.
Function types: Different function types have characteristic domain/range behaviors.
• Restricted: Limited interval [a, b]
• Contextual: Based on real-world constraints
• Discrete: Specific values only
• Decreasing function: [f(max), f(min)]
• Continuous: No gaps in output values
• Endpoint evaluation: Key to range
• Range: Usually all reals unless domain restricted
• Monotonic: Always increasing or decreasing
• Continuous: No breaks in graph
| Notation | Name | Meaning | Example |
|---|---|---|---|
| (a, b) | Open interval | a < x < b | (2, 5) means 2 < x < 5 |
| [a, b] | Closed interval | a ≤ x ≤ b | [2, 5] means 2 ≤ x ≤ 5 |
| [a, b) | Half-open | a ≤ x < b | [2, 5) means 2 ≤ x < 5 |
| (-∞, ∞) | All reals | All real numbers | Domain of linear functions |
| [a, ∞) | Unbounded above | x ≥ a | [3, ∞) means x ≥ 3 |
Domain: (-∞, ∞)
Range: (-∞, ∞)
Range: [f(0), f(5)] = [-3, 7]
(Increasing function)
Range: [f(3), f(1)] = [1, 3]
(Decreasing function)
Method 1 - Algebraic Analysis: Identify restrictions in the function expression
Method 2 - Graphical Analysis: Visually identify x and y values covered by the graph
Method 3 - Function Type Recognition: Apply known properties of specific function types
Method 4 - Contextual Analysis: Consider real-world constraints
- Scan for restrictions: Look for denominators, roots, logs, etc.
- Identify problematic values: Values that make expressions undefined
- Exclude from domain: Remove problematic values
- Express in notation: Use interval or set notation
- Verify: Check that excluded values truly cause problems
• Always check for division by zero, negative square roots, and negative logarithm arguments
• For polynomial functions, domain is typically all real numbers
• Use graphical analysis to confirm analytical results
• Express answers using proper mathematical notation
Domain/Range Analysis Workflow
Questions & Answers
Question: How do I know if I should use parentheses or brackets in interval notation?
Answer: Use these rules for interval notation:
- Parentheses (): Used for "not included" or infinity endpoints
- Brackets []: Used for "included" endpoints
- Infinity: Always use parentheses with ∞ or -∞
- Restrictions: Use parentheses around excluded values
Example: Domain of f(x) = 1/x is (-∞, 0) ∪ (0, ∞) because 0 is excluded.
Question: Why does the range depend on the domain for linear functions?
Answer: The range depends on the domain because:
- Input-output relationship: The output (y-value) depends on the input (x-value)
- Function behavior: For linear functions, the range is determined by the function values at the domain endpoints
- Monotonicity: Linear functions are either always increasing or always decreasing
- Continuity: Linear functions are continuous, so they take on all values between endpoints
If the domain is restricted, the range is also restricted accordingly.
Question: How do I determine the range when the function is decreasing?
Answer: For decreasing linear functions:
- Maximum at left endpoint: If domain is [a, b], maximum is f(a)
- Minimum at right endpoint: Minimum is f(b)
- Range order: [f(b), f(a)] for decreasing function
- Example: For f(x) = -2x + 5 on [1, 4], range is [f(4), f(1)] = [-3, 3]
The range goes from the lowest function value to the highest function value.