Slope-intercept form: The equation of a line written as \(y = mx + b\) where \(m\) is the slope and \(b\) is the y-intercept
Graphing procedure: Plot the y-intercept first, then use the slope to find additional points
- Identify the y-intercept (0, b) and plot it
- Identify the slope m (rise/run)
- From the y-intercept, move up (or down) by the rise and right by the run
- Plot the new point and draw a line through both points
From \(y = 2x + 3\): slope \(m = 2\), y-intercept \(b = 3\)
Y-intercept point: \((0, 3)\)
Mark the point \((0, 3)\) on the y-axis
Slope \(m = 2 = \frac{2}{1}\) (rise = 2, run = 1)
From \((0, 3)\): move up 2 units and right 1 unit
New point: \((1, 5)\)
Line: \(y = 2x + 3\)
The line passes through \((0, 3)\) with a slope of 2, rising steeply from left to right.
• Y-intercept rule: Always starts at \((0, b)\)
• Slope rule: Rise over run determines next point
• Positive slope: Line rises from left to right
Negative slope: When the slope is negative, the line falls from left to right
From \(y = -\frac{1}{2}x + 4\): slope \(m = -\frac{1}{2}\), y-intercept \(b = 4\)
Y-intercept point: \((0, 4)\)
Mark the point \((0, 4)\) on the y-axis
Slope \(m = -\frac{1}{2} = \frac{-1}{2}\) (rise = -1, run = 2)
From \((0, 4)\): move down 1 unit and right 2 units
New point: \((2, 3)\)
Line: \(y = -\frac{1}{2}x + 4\)
The line passes through \((0, 4)\) with a negative slope of \(-\frac{1}{2}\), falling gradually from left to right.
• Negative slope: Line falls from left to right
• Fractional slope: Rise and run are numerator and denominator
• Direction rule: Negative rise means move down
Fractional slope: When the slope is a fraction \(\frac{a}{b}\), move up \(a\) units and right \(b\) units from any point on the line
From \(y = \frac{3}{4}x - 2\): slope \(m = \frac{3}{4}\), y-intercept \(b = -2\)
Y-intercept point: \((0, -2)\)
Mark the point \((0, -2)\) on the y-axis
Slope \(m = \frac{3}{4}\) (rise = 3, run = 4)
From \((0, -2)\): move up 3 units and right 4 units
New point: \((4, 1)\)
Check: \(y = \frac{3}{4}(4) - 2 = 3 - 2 = 1\) ✓
Line: \(y = \frac{3}{4}x - 2\)
The line passes through \((0, -2)\) with a positive fractional slope of \(\frac{3}{4}\), rising gently from left to right.
• Fractional slope: Numerator is rise, denominator is run
• Positive fractional slope: Line rises gradually
• Verification: Check points satisfy the equation
Plot y-intercept
(0, b)
From y-intercept
use slope
Plot new point
using rise/run
Draw line
through points
Rises left to right
\(m > 0\)
Falls left to right
\(m < 0\)
Horizontal line
\(m = 0\)
Vertical line
Not a function
| Slope Type | Value Range | Graph Behavior |
|---|---|---|
| Positive | m > 0 | Line rises from left to right |
| Negative | m < 0 | Line falls from left to right |
| Zero | m = 0 | Horizontal line |
| Fractional | 0 < |m| < 1 | Gentle incline/decline |
\((-\infty, \infty)\)
\((-\infty, \infty)\)
Slope-intercept form: The linear equation written as \(y = mx + b\), where \(m\) is the slope and \(b\) is the y-intercept
Slope (m): The ratio of vertical change (rise) to horizontal change (run) between any two points on the line, calculated as \(\frac{y_2-y_1}{x_2-x_1}\)
Y-intercept (b): The y-coordinate of the point where the line crosses the y-axis, occurring when \(x = 0\)
Graphing procedure: A systematic method to plot a line using the y-intercept and slope
- Identify form: Confirm the equation is in the form \(y = mx + b\)
- Extract parameters: Identify \(m\) (slope) and \(b\) (y-intercept) from the equation
- Plot y-intercept: Mark the point \((0, b)\) on the y-axis
- Use slope: From the y-intercept, move according to the rise and run of the slope
- Plot second point: Mark the new point found using the slope
- Draw line: Connect both points with a straight line extending in both directions
• Slope interpretation: \(m = \frac{\text{rise}}{\text{run}} = \frac{\text{change in y}}{\text{change in x}}\)
• Positive slope: Line rises from left to right
• Negative slope: Line falls from left to right
• Zero slope: Horizontal line (y = b)
• Fractional slope: Gentle incline/decline depending on magnitude
Slope-Intercept Form: The standard form of a linear equation written as \(y = mx + b\), where \(m\) represents the slope of the line and \(b\) represents the y-intercept.
Graphing Procedure: A systematic method to plot a linear equation by using the y-intercept as the starting point and the slope to determine the direction and steepness of the line.
Slope (m): A measure of the steepness of a line, calculated as the ratio of the vertical change (rise) to the horizontal change (run) between any two points on the line. It indicates both the direction and the steepness of the line.
Y-intercept (b): The point where the line crosses the y-axis, which occurs when \(x = 0\). The y-intercept is represented as the coordinate \((0, b)\).
Rise and Run: Terms used to describe the slope: rise is the vertical movement (change in y) and run is the horizontal movement (change in x).
• Y-intercept rule: Always plot the point \((0, b)\) first
• Slope direction rule: Positive slope rises, negative slope falls
• Rise/run rule: Move vertically by the rise value, then horizontally by the run value
• Fractional slope rule: For slope \(\frac{a}{b}\), rise = a, run = b
• Line extension rule: Draw the line extending infinitely in both directions
Questions & Answers
Question: How do I graph a line if the slope is a whole number like y = 3x + 2?
Answer: When the slope is a whole number, treat it as a fraction with denominator 1:
For y = 3x + 2, the slope is 3, which can be written as 3/1.
This means: rise = 3, run = 1
Steps:
- Plot the y-intercept at (0, 2)
- From (0, 2), move up 3 units and right 1 unit
- This takes you to the point (1, 5)
- Draw a line through (0, 2) and (1, 5)
Any whole number slope n can be written as n/1, so rise = n and run = 1.
Question: What if I want to graph using a point other than the y-intercept? Can I still use the slope?
Answer: Yes, you can use the slope from any point on the line! The slope is constant everywhere on a straight line.
Example: If you know the line y = 2x - 1 passes through point (2, 3), you can use the slope m = 2 from this point:
- From (2, 3), move up 2 units and right 1 unit to reach (3, 5)
- From (2, 3), move down 2 units and left 1 unit to reach (1, 1)
- Draw the line through these points
However, starting with the y-intercept is usually easier because it's always at (0, b).
Question: How can I check if my graph is correct after plotting the line?
Answer: There are several ways to verify your graph is correct:
Method 1: Check if points satisfy the equation
- Select a few points on your drawn line
- Substitute the x-coordinate into the equation
- Verify that the calculated y-value matches the y-coordinate of the point
Method 2: Verify slope consistency
- Choose any two points on your line
- Calculate the slope using (y₂-y₁)/(x₂-x₁)
- Confirm it equals the slope in the equation
Method 3: Check y-intercept
- Verify the line crosses the y-axis at (0, b)
If all checks pass, your graph is correct!