Solved Exercises on Point-Slope Form in Algebra 1

Master point-slope form: write equations using a point and slope, convert to slope-intercept form, and graph linear equations through these 3 detailed exercises.

Solution: Exercises 1 to 3
1 Writing point-slope equation
Exercise 1
Write the equation of a line with slope 3 passing through the point (2, 5).
Definition:

Point-slope form: The equation of a line written as \(y - y_1 = m(x - x_1)\) where \(m\) is the slope and \((x_1, y_1)\) is a point on the line

Direct substitution: When slope and one point are given, substitute into the point-slope form

Writing method:
  1. Write the general form: \(y - y_1 = m(x - x_1)\)
  2. Identify the given slope \(m\) and point \((x_1, y_1)\)
  3. Substitute the values into the formula
  4. Simplify if needed
Given
\(m = 3, (2, 5)\)
Equation
\(y - 5 = 3(x - 2)\)
Writing Process:
Start with general form: y - y₁ = m(x - x₁)
Identify values: m = 3, x₁ = 2, y₁ = 5
Substitute: y - 5 = 3(x - 2)
Step 1: Identify given values

Slope: \(m = 3\)

Point: \((x_1, y_1) = (2, 5)\)

Step 2: Substitute into point-slope form

Replace \(m\) with 3, \(x_1\) with 2, and \(y_1\) with 5 in \(y - y_1 = m(x - x_1)\)

\(y - 5 = 3(x - 2)\)

Step 3: Verify the equation

Check that the point (2, 5) satisfies the equation:

\(5 - 5 = 3(2 - 2) \Rightarrow 0 = 3(0) \Rightarrow 0 = 0\) ✓

\(y - 5 = 3(x - 2)\)
Final answer:

The point-slope equation is \(y - 5 = 3(x - 2)\).

Applied rules:

• Point-slope form: Always uses the format \(y - y_1 = m(x - x_1)\)

• Substitution: Carefully substitute the given point and slope

• Sign handling: Pay attention to signs when substituting coordinates

2 Converting to slope-intercept form
Exercise 2
Convert the point-slope equation \(y - 4 = 2(x - 1)\) to slope-intercept form.
Definition:

Slope-intercept form: The equation of a line written as \(y = mx + b\) where \(m\) is the slope and \(b\) is the y-intercept

Point-slope
\(y - 4 = 2(x - 1)\)
Slope-intercept
\(y = 2x + 2\)
Conversion Process:
Start with: y - 4 = 2(x - 1)
Distribute: y - 4 = 2x - 2
Add 4: y = 2x - 2 + 4
Simplify: y = 2x + 2
Step 1: Start with the given equation

\(y - 4 = 2(x - 1)\)

Step 2: Distribute the slope

Apply the distributive property: \(y - 4 = 2x - 2\)

Step 3: Solve for y

Add 4 to both sides: \(y = 2x - 2 + 4\)

Step 4: Simplify

Combine like terms: \(y = 2x + 2\)

Step 5: Identify slope and y-intercept

Comparing to \(y = mx + b\):

Slope: \(m = 2\)

Y-intercept: \(b = 2\)

\(y = 2x + 2\)
Slope: \(m = 2\)
Y-intercept: \(b = 2\)
Final answer:

The slope-intercept form is \(y = 2x + 2\).

Applied rules:

• Distribution: Apply the distributive property to the right side

• Isolation: Perform inverse operations to isolate \(y\)

• Simplification: Combine like terms when possible

3 Finding equation from two points
Exercise 3
Write the point-slope equation of the line passing through points (1, 3) and (4, 9).
Definition:

Slope formula: Given two points \((x_1, y_1)\) and \((x_2, y_2)\), the slope is \(m = \frac{y_2 - y_1}{x_2 - x_1}\)

Points
\((1, 3), (4, 9)\)
Point-slope
\(y - 3 = 2(x - 1)\)
Process:
Find slope: m = (9-3)/(4-1) = 6/3 = 2
Use point (1,3): y - 3 = 2(x - 1)
Check with other point: y - 9 = 2(x - 4)
Step 1: Calculate the slope

Using the slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)

Let \((x_1, y_1) = (1, 3)\) and \((x_2, y_2) = (4, 9)\)

\(m = \frac{9 - 3}{4 - 1} = \frac{6}{3} = 2\)

Step 2: Choose a point and write the equation

Using point \((1, 3)\) and slope \(m = 2\):

Point-slope form: \(y - y_1 = m(x - x_1)\)

\(y - 3 = 2(x - 1)\)

Step 3: Verify with the other point

Using point \((4, 9)\) and slope \(m = 2\):

\(y - 9 = 2(x - 4)\)

Both equations represent the same line

Step 4: Convert to slope-intercept (optional)

From \(y - 3 = 2(x - 1)\):

\(y - 3 = 2x - 2\)

\(y = 2x + 1\)

\(y - 3 = 2(x - 1)\) or \(y - 9 = 2(x - 4)\)
Both represent the same line
Final answer:

The point-slope equation is \(y - 3 = 2(x - 1)\).

Applied rules:

• Slope calculation: Always subtract coordinates in the same order

• Point choice: Either point can be used in the formula

• Verification: Both points should satisfy the equation

Visual Learning: Point-Slope Form
Point-Slope Formula
Point-Slope Form
\(y - y_1 = m(x - x_1)\)
m = slope
\((x_1, y_1)\) = known point
When to Use Point-Slope Form
Given Point and Slope

Direct substitution
y - y₁ = m(x - x₁)
Given Two Points

Find slope first
Then use point-slope
Graphing

Use point and slope
Plot and draw
Converting Forms

To slope-intercept
Distribute and solve
Point-Slope Components
y - y₁
Change in y
m
Slope
x - x₁
Change in x
(x₁, y₁)
Known point
Form Conversion
Original Form Conversion Method Result
Point-slope: y - y₁ = m(x - x₁) Distribute m, solve for y y = mx + b
Slope-intercept: y = mx + b Rearrange to isolate y - y₁ y - y₁ = m(x - x₁)
Standard: Ax + By = C Solve for y, rearrange y - y₁ = m(x - x₁)
DOMAIN
All real numbers
\((-\infty, \infty)\)
RANGE
All real numbers
\((-\infty, \infty)\)
Key Concepts: Point-Slope Form
\(y - y_1 = m(x - x_1)\)
Point-Slope Form
Key definitions:

Point-slope form: The linear equation written as \(y - y_1 = m(x - x_1)\), where \(m\) is the slope and \((x_1, y_1)\) is a point on the line

Slope (m): The ratio of vertical change (rise) to horizontal change (run) between any two points on the line, calculated as \(\frac{y_2-y_1}{x_2-x_1}\)

Known point: A specific coordinate \((x_1, y_1)\) that lies on the line

Form conversion: The process of changing from one form of linear equation to another

Complete methodology:
  1. Identify available information: Determine what is given (slope and point, two points, etc.)
  2. Calculate missing components: Find slope if needed using two points
  3. Substitute into form: Use the point-slope formula and substitute known values
  4. Simplify if needed: Convert to other forms like slope-intercept if required
  5. Verify: Check that the equation satisfies given conditions
Tip 1: Point-slope form is most useful when you know a point and the slope.
Tip 2: You can use either of two given points in the point-slope form.
Tip 3: When converting to slope-intercept, distribute the slope first.
Tip 4: Always verify your equation by checking if the given point satisfies it.
Domain: All real numbers \((-\infty, \infty)\) for any linear function.
Range: All real numbers \((-\infty, \infty)\) for non-horizontal lines.
Important Rules:

• Slope calculation: \(m = \frac{y_2-y_1}{x_2-x_1}\), order matters in both numerator and denominator

• Point selection: Either point can be used when two points are given

• Distribution: When converting, distribute the slope to both terms in parentheses

• Verification: Substitute the known point to confirm correctness

Detailed Summary: Point-Slope Form
Key Concepts and Definitions:

Point-Slope Form: The linear equation written as \(y - y_1 = m(x - x_1)\), where \(m\) is the slope and \((x_1, y_1)\) is a point on the line.

Applications: Point-slope form is particularly useful when you know the slope and one point on the line, or when you have two points and need to find the equation.

Slope Formula: Used to calculate the slope when given two points: \(m = \frac{y_2-y_1}{x_2-x_1}\).

Form Conversion: The process of changing from point-slope form to other forms like slope-intercept form (\(y = mx + b\)).

Linear Equations: All point-slope equations represent straight lines and can be converted to other equivalent forms.

Core Rules and Laws:

• Point-slope rule: Always uses the format \(y - y_1 = m(x - x_1)\)

• Slope calculation rule: Keep coordinates in consistent order: (y₂-y₁)/(x₂-x₁)

• Point selection rule: When two points are given, either can be used in the formula

• Conversion rule: To convert to slope-intercept, distribute and solve for y

• Verification rule: Always check that the equation satisfies the original conditions

Step-by-Step Methods for Point-Slope Form:
1. Given slope and point: Directly substitute into y - y₁ = m(x - x₁)
2. Given two points: Calculate slope first, then use one point in point-slope form
3. Converting to slope-intercept: Distribute slope and solve for y
4. Always verify by checking that the equation satisfies the original conditions
Multiple Examples: With point and slope: y - 3 = 2(x - 1); Two points: (0,1),(2,5) → y - 1 = 2x; Convert: y - 4 = 3(x + 2) → y = 3x + 10
Tips and Tricks: "Keep your x's and y's in the same order" for slope calculation; remember to distribute the slope when converting
Common Pitfalls: Mixing up numerator and denominator in slope formula; forgetting to distribute the slope when converting to slope-intercept form
Memorization Aid: "y minus y-one equals m times (x minus x-one)" - remember the subtraction pattern

Questions & Answers

Question: Can I use either point when I have two points to write the point-slope equation?

Answer: Yes, you can use either point when you have two points! Both will give you equivalent equations that represent the same line:

Example: For points (1, 3) and (4, 9), with slope m = 2:

  • Using (1, 3): y - 3 = 2(x - 1)
  • Using (4, 9): y - 9 = 2(x - 4)

Both equations are correct and represent the same line. When converted to slope-intercept form, both yield y = 2x + 1.

Choose the point that makes calculations easier (often one with zeros or smaller numbers).

Question: How do I convert from point-slope form to standard form (Ax + By = C)?

Answer: To convert from point-slope form to standard form:

Example: Convert y - 3 = 2(x - 1) to standard form

  • Distribute the slope: y - 3 = 2x - 2
  • Add 3 to both sides: y = 2x - 2 + 3
  • Simplify: y = 2x + 1
  • Move x-term to left: -2x + y = 1
  • Make x-coefficient positive: 2x - y = -1

The standard form is 2x - y = -1, where A = 2, B = -1, and C = -1.

Remember: In standard form, A, B, and C should be integers, and A should be positive.

Question: When would I use point-slope form instead of slope-intercept form?

Answer: Use point-slope form when:

  • You're given a point and the slope (not the y-intercept)
  • You're given two points and need to find the equation
  • You're working with a specific point on the line that's not the y-intercept
  • You want to emphasize the relationship between a known point and any other point on the line

Use slope-intercept form when:

  • You're given the y-intercept and slope
  • You need to easily identify the y-intercept
  • You're graphing and want to start at the y-intercept

Point-slope form is more flexible since you can use any point on the line, not just the y-intercept.