Graphing using slope-intercept: Plot the y-intercept (0, b), then use the slope m to find additional points.
- Identify the y-intercept (0, b) from the equation y = mx + b
- Plot the y-intercept on the coordinate plane
- Identify the slope m from the equation y = mx + b
- Use the slope to find additional points (rise over run)
- Draw a straight line through the points
From y = 3x + 2, the y-intercept is b = 2, so the y-intercept point is (0, 2).
Mark the point (0, 2) on the y-axis.
From y = 3x + 2, the slope is m = 3, which can be written as 3/1 (rise/run).
Starting from (0, 2), move up 3 units (rise = 3) and right 1 unit (run = 1).
New point: (0+1, 2+3) = (1, 5).
From (1, 5), move up 3 and right 1 again.
New point: (1+1, 5+3) = (2, 8).
Connect the points (0, 2), (1, 5), and (2, 8) with a straight line extending in both directions.
The line passes through (0, 2) with slope m = 3. Additional points include (1, 5) and (2, 8).
• Y-intercept location: Occurs at point (0, b) in y = mx + b
• Slope interpretation: Rise over run (vertical change/horizontal change)
• Graphing method: Plot y-intercept, use slope to find additional points
Negative slope: A line with negative slope falls from left to right.
From y = -2x + 4, the y-intercept is b = 4, so the y-intercept point is (0, 4).
Mark the point (0, 4) on the y-axis.
From y = -2x + 4, the slope is m = -2, which can be written as -2/1 (rise/run).
Starting from (0, 4), move down 2 units (rise = -2) and right 1 unit (run = 1).
New point: (0+1, 4-2) = (1, 2).
From (1, 2), move down 2 and right 1 again.
New point: (1+1, 2-2) = (2, 0).
Connect the points (0, 4), (1, 2), and (2, 0) with a straight line extending in both directions.
With negative slope, the line falls from left to right, confirming our graph is correct.
The line passes through (0, 4) with slope m = -2. Additional points include (1, 2) and (2, 0).
• Negative slope: Line falls from left to right
• Direction of movement: Negative rise means moving down
• Consistency: Use the same slope to find multiple points
Fractional slope: A slope expressed as a fraction, indicating partial units of rise per unit of run.
From y = (1/2)x - 3, the y-intercept is b = -3, so the y-intercept point is (0, -3).
Mark the point (0, -3) on the y-axis.
From y = (1/2)x - 3, the slope is m = 1/2, which means rise = 1, run = 2.
Starting from (0, -3), move up 1 unit (rise = 1) and right 2 units (run = 2).
New point: (0+2, -3+1) = (2, -2).
From (2, -2), move up 1 and right 2 again.
New point: (2+2, -2+1) = (4, -1).
You can also move in the opposite direction: from (0, -3), move down 1 and left 2 to get (-2, -4).
Connect the points (0, -3), (2, -2), (4, -1), and (-2, -4) with a straight line.
The line passes through (0, -3) with slope m = 1/2. Additional points include (2, -2) and (4, -1).
• Fractional slope: Rise/run where both rise and run are integers
• Multiple moves: You can apply the rise/run multiple times
• Opposite direction: Moving in the opposite direction also gives valid points
Slope-Intercept Form: y = mx + b, where m is the slope and b is the y-intercept.
Slope (m): The rate of change of y with respect to x, representing the steepness of the line.
Y-intercept (b): The y-coordinate of the point where the line crosses the y-axis (where x = 0).
Graphing: The process of creating a visual representation of an equation on the coordinate plane.
- Identify components: In y = mx + b, identify m (slope) and b (y-intercept)
- Plot y-intercept: Mark the point (0, b) on the y-axis
- Interpret slope: Express slope as rise/run
- Find additional points: From y-intercept, move rise units vertically and run units horizontally
- Repeat: Continue using the slope to find more points
- Draw line: Connect points with a straight line extending in both directions
• Slope-intercept form: y = mx + b
• Y-intercept: (0, b)
• Slope: m = rise/run = (y₂ - y₁)/(x₂ - x₁)
• Positive slope: m > 0 (line rises)
• Negative slope: m < 0 (line falls)
• Zero slope: m = 0 (horizontal line)
Zero slope: A horizontal line with equation y = b, where m = 0.
y = -2 can be written as y = 0x + (-2), so m = 0 and b = -2.
The y-intercept is (0, -2).
With m = 0, there is no vertical change regardless of horizontal change.
Draw a horizontal line passing through (0, -2). This line includes points like (-3, -2), (-1, -2), (1, -2), (3, -2), etc.
Any point on the line has y-coordinate -2, which matches the equation y = -2.
The equation y = -2 represents a horizontal line passing through (0, -2) with slope m = 0.
• Zero slope: Horizontal line y = b
• Constant y-value: All points have same y-coordinate
• No rise: Line is perfectly flat
Linear model: A linear equation used to represent a real-world situation with constant rate of change.
The plant grows at 0.5 inches per week, so the slope is m = 0.5.
When planted (w = 0), the height was 3 inches, so the y-intercept is b = 3.
Using y = mx + b with h as y, w as x: h = 0.5w + 3.
From h = 0.5w + 3, the y-intercept is (0, 3).
Starting from (0, 3), with slope m = 0.5 = 1/2, move up 1 inch and right 2 weeks.
Point 1: (0+2, 3+1) = (2, 4)
Point 2: (2+2, 4+1) = (4, 5)
Point 3: (4+2, 5+1) = (6, 6)
Point 4: (6+2, 6+1) = (8, 7)
Plot the points (0, 3), (2, 4), (4, 5), (6, 6), and (8, 7), then connect with a straight line.
Points: (0,3), (2,4), (4,5), (6,6), (8,7)
The equation is h = 0.5w + 3. The graph shows the plant growing linearly over time.
• Modeling: Identify rate of change (slope) and initial value (y-intercept)
• Real-world application: Linear equations model constant rates of change
• Graphing applications: Use realistic domain values for practical problems
Slope-Intercept Form: The form y = mx + b, where m represents the slope of the line and b represents the y-intercept. This form makes it easy to graph linear equations.
Slope (m): The rate of change of y with respect to x, calculated as rise over run. It indicates the steepness and direction of the line.
Y-intercept (b): The y-coordinate of the point where the line crosses the y-axis. This occurs when x = 0.
Graphing: The process of creating a visual representation of an equation by plotting points that satisfy the equation.
Linear Model: A linear equation used to represent a real-world situation where one quantity changes at a constant rate with respect to another.
- Identify components: In y = mx + b, identify m (slope) and b (y-intercept)
- Plot y-intercept: Mark the point (0, b) on the y-axis
- Interpret slope: Express slope as rise/run and understand its meaning
- Find additional points: From y-intercept, move rise units vertically and run units horizontally
- Repeat: Continue using the slope to find more points in both directions
- Draw line: Connect points with a straight line extending in both directions
- Verify: Check that points satisfy the equation
• Slope-intercept form: y = mx + b
• Y-intercept: (0, b)
• Slope: m = rise/run = (y₂ - y₁)/(x₂ - x₁)
• Positive slope: m > 0 (line rises left to right)
• Negative slope: m < 0 (line falls left to right)
• Zero slope: m = 0 (horizontal line y = b)
• Slope consistency: Any two points on the line yield the same slope value
Analysis: The chart shows how different slopes affect the steepness and direction of lines.
- Positive slopes rise from left to right
- Negative slopes fall from left to right
- Greater absolute values indicate steeper lines
- Zero slope creates horizontal lines