Slope-Intercept Form: y = mx + b, where m is the slope and b is the y-intercept.
- Compare the given equation to the form y = mx + b
- Identify the coefficient of x as the slope (m)
- Identify the constant term as the y-intercept (b)
- State the slope and y-intercept
The equation y = -3x + 7 is already in slope-intercept form y = mx + b.
In y = mx + b:
- The coefficient of x is m (the slope)
- The constant term is b (the y-intercept)
In y = -3x + 7, the coefficient of x is -3, so m = -3.
In y = -3x + 7, the constant term is 7, so b = 7.
Slope: m = -3
Y-intercept: b = 7 (occurs at point (0, 7))
For y = -3x + 7: slope m = -3 and y-intercept b = 7.
• Slope-intercept form: y = mx + b where m is slope and b is y-intercept
• Identification: Coefficient of x is m, constant term is b
• Y-intercept location: Occurs at point (0, b)
Graphing using slope-intercept: Plot the y-intercept, then use the slope to find additional points.
From y = 2x - 4, the y-intercept is b = -4, so the y-intercept point is (0, -4).
Mark the point (0, -4) on the y-axis.
From y = 2x - 4, the slope is m = 2, which can be written as 2/1 (rise/run).
Starting from (0, -4), move up 2 units (rise = 2) and right 1 unit (run = 1).
New point: (0+1, -4+2) = (1, -2).
From (1, -2), move up 2 and right 1 again.
New point: (1+1, -2+2) = (2, 0).
Connect the points (0, -4), (1, -2), and (2, 0) with a straight line extending in both directions.
Slope: m = 2
The graph passes through (0, -4) with slope m = 2. Additional points include (1, -2) and (2, 0).
• Graphing method: Plot y-intercept, use slope to find additional points
• Slope interpretation: Rise over run (vertical change/horizontal change)
• Line extension: Draw line through points extending infinitely in both directions
Converting to slope-intercept: Solving for y to get the form y = mx + b.
3x + 2y = 8
3x + 2y - 3x = 8 - 3x
2y = -3x + 8
(2y)/2 = (-3x + 8)/2
y = (-3x)/2 + 8/2
y = -3/2x + 4
In y = -3/2x + 4:
- m = -3/2 (slope)
- b = 4 (y-intercept)
Check: If x = 0, y = -3/2(0) + 4 = 4 ✓
Check: 3(0) + 2(4) = 0 + 8 = 8 ✓
m = -3/2, b = 4
Slope-intercept form: y = -3/2x + 4
Slope: m = -3/2, Y-intercept: b = 4
• Algebraic manipulation: Perform same operation on both sides
• Isolation: Get y alone on one side of the equation
• Verification: Check solution by substituting values
Slope-Intercept Form: y = mx + b, where m is the slope and b is the y-intercept.
Slope (m): The rate of change of y with respect to x, representing the steepness of the line.
Y-intercept (b): The y-coordinate of the point where the line crosses the y-axis (where x = 0).
- Identify components: In y = mx + b, m is slope and b is y-intercept
- Graphing: Plot y-intercept (0, b), use slope to find additional points
- Conversion: Solve equation for y to get slope-intercept form
- Writing equations: Use slope and y-intercept to write y = mx + b
- Verification: Check that points satisfy the equation
• Slope-intercept form: y = mx + b
• Slope: m = rise/run = (y₂ - y₁)/(x₂ - x₁)
• Y-intercept occurs at point (0, b)
• Point-slope form: y - y₁ = m(x - x₁)
• Standard form: Ax + By = C
• Conversion: Solve for y to convert to slope-intercept form
Writing equations: Given slope m and y-intercept b, substitute directly into y = mx + b.
Slope: m = -2
Y-intercept: b = 5
The slope-intercept form is y = mx + b.
Substitute m = -2 and b = 5 into y = mx + b:
y = (-2)x + 5
y = -2x + 5
Plot the y-intercept (0, 5)
From (0, 5), use slope m = -2 = -2/1: move down 2 units and right 1 unit to get (1, 3)
Draw a line through (0, 5) and (1, 3)
From (1, 3), use slope again: move down 2 and right 1 to get (2, 1)
Check: y = -2(2) + 5 = -4 + 5 = 1 ✓
The equation is y = -2x + 5. The graph passes through (0, 5) with slope -2.
• Direct substitution: When m and b are given, directly substitute into y = mx + b
• Graphing from equation: Use y-intercept and slope to plot points
• Verification: Check that points satisfy the equation
Linear models: Real-world situations that can be represented by linear equations of the form y = mx + b.
Base fare (initial cost): $3
Cost per mile: $2.50 per mile
Total cost = Base fare + (Cost per mile × Number of miles)
Let C = cost and m = miles
C = 2.50m + 3
Comparing to y = mx + b:
- Slope m = 2.50
- Y-intercept b = 3
The slope m = 2.50 represents the rate of change of cost with respect to miles.
It means the cost increases by $2.50 for each additional mile driven.
The y-intercept b = 3 represents the cost when m = 0 (no miles driven).
It's the base fare that is charged regardless of distance.
If m = 0: C = 2.50(0) + 3 = $3 (base fare) ✓
If m = 2: C = 2.50(2) + 3 = $8 (base fare + 2 miles at $2.50 each) ✓
m = 2.50, b = 3
The equation is C = 2.50m + 3, where the slope 2.50 represents the cost per mile, and the y-intercept 3 represents the base fare.
• Modeling: Identify the rate of change (slope) and initial value (y-intercept)
• Interpretation: Understand the real-world meaning of slope and y-intercept
• Verification: Check that the equation makes sense with sample values
Slope-Intercept Form: The form y = mx + b, where m represents the slope of the line and b represents the y-intercept. This form makes it easy to identify the slope and y-intercept directly from the equation.
Slope (m): The rate of change of y with respect to x, calculated as rise over run. It indicates the steepness and direction of the line.
Y-intercept (b): The y-coordinate of the point where the line crosses the y-axis. This occurs when x = 0.
Linear Model: A linear equation used to represent a real-world situation where one quantity changes at a constant rate with respect to another.
- Identifying components: In y = mx + b, m is the coefficient of x and b is the constant term
- Graphing: Plot the y-intercept (0, b), then use the slope to find additional points
- Converting forms: Solve for y to transform equations into slope-intercept form
- Writing equations: Use slope and y-intercept to write y = mx + b directly
- Creating models: Identify rate of change and initial value from real-world situations
- Verification: Check that points satisfy the equation and that the solution makes sense
• Slope-intercept form: y = mx + b
• Slope: m = rise/run = (y₂ - y₁)/(x₂ - x₁)
• Y-intercept occurs at point (0, b)
• Point-slope form: y - y₁ = m(x - x₁)
• Standard form: Ax + By = C
• Conversion: Solve for y to convert to slope-intercept form
• Parallel lines: Same slope, different y-intercepts
• Perpendicular lines: Slopes are negative reciprocals (m₁ × m₂ = -1)
Analysis: The chart shows how different slopes affect the steepness and direction of lines.
- Positive slopes rise from left to right
- Negative slopes fall from left to right
- Greater absolute values indicate steeper lines