Solved Exercises on Polynomial Long Division and Synthetic Division in Algebra 1

Master polynomial division: long division and synthetic division methods through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Polynomial Long Division
Exercise 1
Divide using polynomial long division:
\((x^2 + 5x + 6) \div (x + 2)\)
Definition:

Polynomial long division: A method for dividing polynomials similar to arithmetic long division, following the pattern Dividend = Divisor × Quotient + Remainder.

Long division method:
  1. Divide the leading term of dividend by the leading term of divisor
  2. Multiply the divisor by the result from step 1
  3. Subtract this product from the dividend
  4. Bring down the next term
  5. Repeat until the degree of remainder is less than divisor
Dividend
\(x^2 + 5x + 6\)
Divisor
\(x + 2\)
Quotient
\(x + 3\)
Step 1: Set up the division

\(\require{enclose} \begin{array}{r} x+2 \enclose{longdiv}{x^2 + 5x + 6} \end{array}\)

Step 2: Divide leading terms

Divide \(x^2\) by \(x\): \(\frac{x^2}{x} = x\)

Write \(x\) in the quotient

Step 3: Multiply and subtract

Multiply: \(x(x + 2) = x^2 + 2x\)

Subtract: \((x^2 + 5x + 6) - (x^2 + 2x) = 3x + 6\)

Step 4: Repeat with new dividend

Divide \(3x\) by \(x\): \(\frac{3x}{x} = 3\)

Write \(3\) in the quotient: \(x + 3\)

Step 5: Multiply and subtract

Multiply: \(3(x + 2) = 3x + 6\)

Subtract: \((3x + 6) - (3x + 6) = 0\)

Step 6: Final result

Quotient: \(x + 3\), Remainder: \(0\)

So: \(\frac{x^2 + 5x + 6}{x + 2} = x + 3\)

Quotient: \(x + 3\), Remainder: \(0\)
Final answer:

\(\frac{x^2 + 5x + 6}{x + 2} = x + 3\)

Applied rules:

• Division algorithm: Dividend = Divisor × Quotient + Remainder

• Leading term division: Divide highest degree terms first

• Sign handling: Be careful with subtraction of polynomials

2 Polynomial Long Division with Remainder
Exercise 2
Divide using polynomial long division:
\((2x^3 - 3x^2 + x - 4) \div (x - 1)\)
Definition:

Division with remainder: When the division doesn't result in a whole polynomial, the remainder is the leftover polynomial with degree less than the divisor.

Dividend
\(2x^3 - 3x^2 + x - 4\)
Divisor
\(x - 1\)
Result
\(2x^2 - x - 4\) remainder \(-8\)
Step 1: Set up the division

\(\require{enclose} \begin{array}{r} x-1 \enclose{longdiv}{2x^3 - 3x^2 + x - 4} \end{array}\)

Step 2: Divide leading terms

Divide \(2x^3\) by \(x\): \(\frac{2x^3}{x} = 2x^2\)

Write \(2x^2\) in the quotient

Step 3: Multiply and subtract

Multiply: \(2x^2(x - 1) = 2x^3 - 2x^2\)

Subtract: \((2x^3 - 3x^2 + x - 4) - (2x^3 - 2x^2) = -x^2 + x - 4\)

Step 4: Divide new leading terms

Divide \(-x^2\) by \(x\): \(\frac{-x^2}{x} = -x\)

Write \(-x\) in the quotient: \(2x^2 - x\)

Step 5: Multiply and subtract

Multiply: \(-x(x - 1) = -x^2 + x\)

Subtract: \((-x^2 + x - 4) - (-x^2 + x) = -4\)

Step 6: Final step

Divide \(-4\) by \(x\): Cannot divide further since degree of \(-4\) is less than degree of \(x\)

Remainder: \(-4\)

Step 7: Final result

Quotient: \(2x^2 - x\), Remainder: \(-4\)

So: \(\frac{2x^3 - 3x^2 + x - 4}{x - 1} = 2x^2 - x + \frac{-4}{x - 1}\)

Quotient: \(2x^2 - x\), Remainder: \(-4\)
Final answer:

\(\frac{2x^3 - 3x^2 + x - 4}{x - 1} = 2x^2 - x - \frac{4}{x - 1}\)

Applied rules:

• Division algorithm: The remainder has degree less than the divisor

• Remainder theorem: When dividing by \((x - c)\), the remainder is the value of the polynomial at \(x = c\)

• Sign handling: Be careful with negative coefficients during subtraction

3 Synthetic Division
Exercise 3
Divide using synthetic division:
\((x^3 - 2x^2 - 5x + 6) \div (x - 3)\)
Definition:

Synthetic division: A simplified method for dividing polynomials by linear divisors of the form \((x - c)\), using only the coefficients of the dividend.

Coefficients
\(1, -2, -5, 6\)
Value of c
\(c = 3\)
Result
\(x^2 + x - 2\) remainder \(0\)
Step 1: Set up synthetic division

For \((x - 3)\), we use \(c = 3\)

Write coefficients of dividend: \(1, -2, -5, 6\)

\( \begin{array}{c|cccc} 3 & 1 & -2 & -5 & 6 \\ & & & & \\ \hline & & & & \end{array} \)

Step 2: Bring down the first coefficient

\( \begin{array}{c|cccc} 3 & 1 & -2 & -5 & 6 \\ & & & & \\ \hline & 1 & & & \end{array} \)

Step 3: Multiply and add

Multiply \(1 \times 3 = 3\), add to next coefficient: \(-2 + 3 = 1\)

\( \begin{array}{c|cccc} 3 & 1 & -2 & -5 & 6 \\ & & 3 & & \\ \hline & 1 & 1 & & \end{array} \)

Step 4: Continue the process

Multiply \(1 \times 3 = 3\), add to next coefficient: \(-5 + 3 = -2\)

\( \begin{array}{c|cccc} 3 & 1 & -2 & -5 & 6 \\ & & 3 & 3 & \\ \hline & 1 & 1 & -2 & \end{array} \)

Step 5: Final multiplication

Multiply \(-2 \times 3 = -6\), add to last coefficient: \(6 + (-6) = 0\)

\( \begin{array}{c|cccc} 3 & 1 & -2 & -5 & 6 \\ & & 3 & 3 & -6 \\ \hline & 1 & 1 & -2 & 0 \end{array} \)

Step 6: Interpret the result

The last number (0) is the remainder

The other numbers \([1, 1, -2]\) are the coefficients of the quotient

Quotient: \(x^2 + x - 2\), Remainder: \(0\)

Quotient: \(x^2 + x - 2\), Remainder: \(0\)
Final answer:

\(\frac{x^3 - 2x^2 - 5x + 6}{x - 3} = x^2 + x - 2\)

Applied rules:

• Synthetic division: Only works when divisor is linear \((x - c)\)

• Coefficient alignment: Include all coefficients, including zeros

• Zero remainder: Indicates that \(x - c\) is a factor of the polynomial

Polynomial Division Summary
\(\text{Dividend} = \text{Divisor} \times \text{Quotient} + \text{Remainder}\)
Division Algorithm
Long Division
\(\frac{P(x)}{D(x)} = Q(x) + \frac{R(x)}{D(x)}\)
Works for any divisor
Synthetic Division
\(D(x) = x - c\)
Only for linear divisors
Remainder Theorem
\(P(c) = R\)
Remainder when dividing by \((x - c)\)
Key definitions:

Polynomial long division: A method for dividing polynomials that extends the concept of arithmetic long division to polynomials

Synthetic division: A shortcut method for dividing polynomials by linear factors of the form \((x - c)\)

Remainder theorem: When a polynomial \(P(x)\) is divided by \((x - c)\), the remainder is \(P(c)\)

Division methodology:
  1. Choose method: Long division for any divisor, synthetic for linear divisors
  2. Set up division: Arrange terms in descending order
  3. Divide leading terms: Begin the division process
  4. Continue process: Multiply, subtract, bring down next term
  5. Stop when appropriate: When remainder has lower degree than divisor
  6. Verify result: Multiply quotient by divisor and add remainder
Tip 1: Always arrange terms in descending order before starting division.
Tip 2: Include all coefficients in synthetic division, even if they're zero.
Tip 3: The degree of the quotient is the degree of dividend minus the degree of divisor.
Tip 4: Zero remainder means the divisor is a factor of the dividend.
Common errors: Forgetting to include zero coefficients, sign errors in subtraction, misaligning terms, stopping too early.
Exam preparation: Practice both methods, understand when to use each, memorize the division algorithm.
Key properties to know by heart:

• Division algorithm: Dividend = Divisor × Quotient + Remainder

• Degree of quotient = Degree of dividend - Degree of divisor

• Remainder theorem: When dividing by \((x - c)\), remainder is \(P(c)\)

• Factor theorem: If remainder is 0, then \((x - c)\) is a factor of the polynomial

Solution: Exercises 4 to 5
4 Synthetic Division with Remainder
Exercise 4
Divide using synthetic division:
\((x^3 + 2x^2 - 3x + 1) \div (x + 1)\)
Definition:

Synthetic division with remainder: When the divisor \((x - c)\) does not divide the polynomial evenly, the last number in the bottom row is the remainder.

Rewrite divisor
\(x + 1 = x - (-1)\), so \(c = -1\)
Coefficients
\(1, 2, -3, 1\)
Result
\(x^2 + x - 4\) remainder \(5\)
Step 1: Convert divisor to form \((x - c)\)

\(x + 1 = x - (-1)\), so \(c = -1\)

Step 2: Set up synthetic division

Coefficients: \(1, 2, -3, 1\)

\( \begin{array}{c|cccc} -1 & 1 & 2 & -3 & 1 \\ & & & & \\ \hline & & & & \end{array} \)

Step 3: Bring down first coefficient

\( \begin{array}{c|cccc} -1 & 1 & 2 & -3 & 1 \\ & & & & \\ \hline & 1 & & & \end{array} \)

Step 4: Multiply and add repeatedly

Multiply: \(1 \times (-1) = -1\), Add: \(2 + (-1) = 1\)

Multiply: \(1 \times (-1) = -1\), Add: \(-3 + (-1) = -4\)

Multiply: \(-4 \times (-1) = 4\), Add: \(1 + 4 = 5\)

Step 5: Complete synthetic division

\( \begin{array}{c|cccc} -1 & 1 & 2 & -3 & 1 \\ & & -1 & -1 & 4 \\ \hline & 1 & 1 & -4 & 5 \end{array} \)

Step 6: Interpret the result

Quotient: \(x^2 + x - 4\), Remainder: \(5\)

So: \(\frac{x^3 + 2x^2 - 3x + 1}{x + 1} = x^2 + x - 4 + \frac{5}{x + 1}\)

Step 7: Verify using remainder theorem

According to the remainder theorem, the remainder should be \(P(-1)\)

\(P(-1) = (-1)^3 + 2(-1)^2 - 3(-1) + 1 = -1 + 2 + 3 + 1 = 5\) ✓

Quotient: \(x^2 + x - 4\), Remainder: \(5\)
Final answer:

\(\frac{x^3 + 2x^2 - 3x + 1}{x + 1} = x^2 + x - 4 + \frac{5}{x + 1}\)

Applied rules:

• Remainder theorem: When dividing by \((x - c)\), remainder is \(P(c)\)

• Synthetic division: Works for any linear divisor \((x - c)\)

• Sign handling: Be careful with negative values of \(c\)

5 Factor Theorem Application
Exercise 5
Determine if \((x - 2)\) is a factor of \(P(x) = x^3 - 3x^2 + 4\) using synthetic division.
Definition:

Factor theorem: A polynomial \(P(x)\) has a factor \((x - c)\) if and only if \(P(c) = 0\).

Evaluate P(2)
\(P(2) = 2^3 - 3(2^2) + 4 = 8 - 12 + 4 = 0\)
Synthetic division
\(c = 2\), coefficients: \(1, 0, -3, 4\)
Conclusion
\((x - 2)\) is a factor
Step 1: Apply the factor theorem

\((x - 2)\) is a factor of \(P(x)\) if and only if \(P(2) = 0\)

Step 2: Evaluate \(P(2)\)

\(P(2) = 2^3 - 3(2^2) + 4 = 8 - 12 + 4 = 0\)

Step 3: Confirm with synthetic division

Set up synthetic division with \(c = 2\)

Note: The polynomial is \(x^3 + 0x^2 - 3x + 4\), so coefficients are \(1, 0, -3, 4\)

\( \begin{array}{c|cccc} 2 & 1 & 0 & -3 & 4 \\ & & 2 & 4 & 2 \\ \hline & 1 & 2 & 1 & 6 \end{array} \)

Step 4: Wait! This doesn't match our evaluation

There's an error in our synthetic division. Let's recalculate:

\(P(x) = x^3 - 3x^2 + 4\), coefficients: \(1, -3, 0, 4\) (we need to include the coefficient of \(x\), which is 0)

\( \begin{array}{c|cccc} 2 & 1 & -3 & 0 & 4 \\ & & 2 & -2 & -4 \\ \hline & 1 & -1 & -2 & 0 \end{array} \)

Step 5: Verify the corrected result

Remainder: \(0\)

Quotient: \(x^2 - x - 2\)

This confirms that \((x - 2)\) is a factor of \(P(x)\)

Step 6: Express the factorization

\(P(x) = (x - 2)(x^2 - x - 2)\)

We can further factor: \(x^2 - x - 2 = (x - 2)(x + 1)\)

So: \(P(x) = (x - 2)^2(x + 1)\)

\((x - 2)\) is a factor of \(P(x)\)
Final answer:

Yes, \((x - 2)\) is a factor of \(P(x) = x^3 - 3x^2 + 4\) since \(P(2) = 0\). The factorization is \(P(x) = (x - 2)^2(x + 1)\).

Applied rules:

• Factor theorem: \((x - c)\) is a factor of \(P(x)\) if and only if \(P(c) = 0\)

• Synthetic division verification: Confirms the factor theorem result

• Zero remainder: Indicates that the divisor is indeed a factor

Polynomial Division: Comprehensive Guide
\(\frac{P(x)}{D(x)} = Q(x) + \frac{R(x)}{D(x)}\)
General Form
Key definitions:

Polynomial long division: A systematic method for dividing polynomials that mirrors arithmetic long division, applicable to any polynomial divisor

Synthetic division: A streamlined algorithm for dividing polynomials by linear factors of the form \((x - c)\), using only coefficients

Remainder theorem: States that the remainder when a polynomial \(P(x)\) is divided by \((x - c)\) is equal to \(P(c)\)

Complete division methodology:
  1. Preparation: Arrange terms in descending order of degree, fill in missing terms with zero coefficients
  2. Method selection: Use synthetic division for linear divisors \((x - c)\), long division for others
  3. Execution: Follow the systematic steps of the chosen method
  4. Verification: Check that Dividend = Divisor × Quotient + Remainder
  5. Interpretation: Understand the relationship between the result and the original polynomials
Tip 1: Always arrange terms in descending order before beginning division.
Tip 2: Include coefficients of zero for any missing terms in the dividend.
Tip 3: The degree of the quotient equals the degree of dividend minus the degree of divisor.
Tip 4: Zero remainder indicates that the divisor is a factor of the dividend.

Common errors: Forgetting to include zero coefficients, sign errors during subtraction, misaligning terms, stopping division too early when remainder has higher degree than divisor.
Exam preparation: Practice both methods extensively, understand the conditions for using synthetic division, memorize the division algorithm and theorems.
Essential properties and theorems:

• Division algorithm: For polynomials \(P(x)\) and \(D(x)\) (where \(D(x) \neq 0\)): \(P(x) = D(x) \cdot Q(x) + R(x)\), where degree of \(R(x) <\) degree of \(D(x)\)

• Remainder theorem: When dividing \(P(x)\) by \((x - c)\), the remainder is \(P(c)\)

• Factor theorem: \((x - c)\) is a factor of \(P(x)\) if and only if \(P(c) = 0\)

• Synthetic division: Only applicable when divisor is of the form \((x - c)\)

Exercise with Visualization: Polynomial Division
Exercise 6: Graphing Polynomial Division Results
Consider the following polynomial divisions and their results:
\(f_1(x) = \frac{x^2 + 5x + 6}{x + 2} = x + 3\) (from Exercise 1)
\(f_2(x) = \frac{2x^3 - 3x^2 + x - 4}{x - 1} = 2x^2 - x - \frac{4}{x - 1}\) (from Exercise 2)
\(f_3(x) = \frac{x^3 - 2x^2 - 5x + 6}{x - 3} = x^2 + x - 2\) (from Exercise 3)

Analysis: The chart shows different polynomial division results and their behavior.

  • \(f_1(x) = x + 3\): Exact division with no remainder
  • \(f_2(x) = 2x^2 - x - \frac{4}{x - 1}\): Has a vertical asymptote at \(x = 1\)
  • \(f_3(x) = x^2 + x - 2\): Exact division with no remainder

Questions & Answers

Question: When should I use synthetic division instead of long division?

Answer: Use synthetic division when and only when the divisor is a linear polynomial of the form \((x - c)\). For example:

  • Use synthetic division for: \(\frac{P(x)}{x - 3}\), \(\frac{P(x)}{x + 2}\), \(\frac{P(x)}{x - 0.5}\)
  • Use long division for: \(\frac{P(x)}{x^2 - 3}\), \(\frac{P(x)}{2x - 1}\), \(\frac{P(x)}{x^2 + x + 1}\)

Synthetic division is much faster and more efficient than long division for the cases where it applies, but it's limited to linear divisors of the specific form \((x - c)\).

Question: How do I know if I made a mistake during polynomial division?

Answer: Always verify your result using the division algorithm: \(\text{Dividend} = \text{Divisor} \times \text{Quotient} + \text{Remainder}\)

For example, if you found that \(\frac{x^2 + 5x + 6}{x + 2} = x + 3\) with remainder 0:

Check: \((x + 2)(x + 3) + 0 = x^2 + 3x + 2x + 6 = x^2 + 5x + 6\) ✓

Additional checks:

  • The degree of the remainder should be less than the degree of the divisor
  • The degree of the quotient should be the degree of dividend minus the degree of divisor
  • For synthetic division, you can use the remainder theorem to verify

Question: What's the connection between the remainder theorem and factor theorem?

Answer: The factor theorem is a special case of the remainder theorem:

  • Remainder theorem: When dividing \(P(x)\) by \((x - c)\), the remainder is \(P(c)\)
  • Factor theorem: \((x - c)\) is a factor of \(P(x)\) if and only if \(P(c) = 0\)

The connection: If the remainder when dividing \(P(x)\) by \((x - c)\) is zero, then \((x - c)\) divides \(P(x)\) evenly, making it a factor. Since the remainder theorem tells us the remainder is \(P(c)\), we get the factor theorem: \((x - c)\) is a factor if and only if \(P(c) = 0\).

Together, these theorems provide powerful tools for polynomial factorization and finding polynomial roots.

Question: What do I do if my polynomial has missing terms when doing synthetic division?

Answer: When a polynomial has missing terms, you must include zeros as coefficients for those missing terms in your synthetic division setup.

For example, if you're dividing \(x^3 + 2x + 1\) by \((x - 2)\):

  • The polynomial is: \(x^3 + 0x^2 + 2x + 1\) (missing \(x^2\) term)
  • Use coefficients: \(1, 0, 2, 1\) (not just \(1, 2, 1\))
  • Synthetic division setup: \(\begin{array}{c|cccc} 2 & 1 & 0 & 2 & 1 \\ \hline & & & & \end{array}\)

Skipping zero coefficients will give you an incorrect result, so always include them in the setup.

Question: How does polynomial division connect to the graph of the function?

Answer: Polynomial division has important graphical implications:

  • Zeros of the polynomial: If \((x - c)\) is a factor (remainder is 0), then \(x = c\) is an x-intercept of the graph
  • Vertical asymptotes: When dividing polynomials, if the divisor has zeros that aren't canceled by the numerator, those create vertical asymptotes
  • End behavior: The quotient polynomial determines the long-term behavior of the rational function
  • Slant asymptotes: If the degree of the numerator is exactly one more than the denominator, the quotient determines the slant asymptote

For example, if \(P(x) = (x - 2)(x^2 + x - 2)\), the graph of \(P(x)\) crosses the x-axis at \(x = 2\), \(x = 1\), and \(x = -2\).