Remainder theorem: When a polynomial \(P(x)\) is divided by \((x - c)\), the remainder is \(P(c)\).
- Identify the value of \(c\) in the divisor \((x - c)\)
- Evaluate the polynomial \(P(x)\) at \(x = c\)
- The result \(P(c)\) is the remainder
The divisor is \((x - 3)\), so \(c = 3\)
\(P(x) = x^3 - 4x^2 + 2x - 1\)
\(P(3) = (3)^3 - 4(3)^2 + 2(3) - 1\)
\(3^3 = 27\)
\(4(3^2) = 4(9) = 36\)
\(2(3) = 6\)
\(P(3) = 27 - 36 + 6 - 1\)
\(P(3) = 27 - 36 + 6 - 1 = -4\)
According to the remainder theorem, when \(P(x)\) is divided by \((x - 3)\), the remainder is \(P(3) = -4\)
\( \begin{array}{c|cccc} 3 & 1 & -4 & 2 & -1 \\ & & 3 & -3 & -3 \\ \hline & 1 & -1 & -1 & -4 \end{array} \)
The remainder is indeed \(-4\), confirming our result.
The remainder when \(P(x) = x^3 - 4x^2 + 2x - 1\) is divided by \((x - 3)\) is \(-4\).
• Remainder theorem: \(P(c)\) is the remainder when dividing by \((x - c)\)
• Direct substitution: More efficient than long division for finding remainders
• Verification: Synthetic division confirms the result
Factor theorem: \((x - c)\) is a factor of polynomial \(P(x)\) if and only if \(P(c) = 0\).
\(x + 2 = x - (-2)\), so \(c = -2\)
\((x + 2)\) is a factor of \(P(x)\) if and only if \(P(-2) = 0\)
\(P(-2) = (-2)^4 + 3(-2)^3 - 6(-2)^2 - 10(-2) + 8\)
\(P(-2) = 16 + 3(-8) - 6(4) - 10(-2) + 8\)
\(P(-2) = 16 - 24 - 24 + 20 + 8\)
\(P(-2) = 16 - 24 - 24 + 20 + 8 = -4\)
Since \(P(-2) = -4 \neq 0\), the factor theorem tells us that \((x + 2)\) is NOT a factor of \(P(x)\).
\( \begin{array}{c|ccccc} -2 & 1 & 3 & -6 & -10 & 8 \\ & & -2 & -2 & 16 & -12 \\ \hline & 1 & 1 & -8 & 6 & -4 \end{array} \)
The remainder is \(-4\), confirming that \((x + 2)\) is not a factor.
We could also check if any of the potential factors of the constant term (8) give us \(P(c) = 0\). Possible values: \(\pm1, \pm2, \pm4, \pm8\).
No, \((x + 2)\) is not a factor of \(P(x) = x^4 + 3x^3 - 6x^2 - 10x + 8\) because \(P(-2) = -4 \neq 0\).
• Factor theorem: \((x - c)\) is a factor if and only if \(P(c) = 0\)
• Sign awareness: When divisor is \((x + c)\), use \(c = -c\) in evaluation
• Verification: Synthetic division confirms the factor theorem result
Factor theorem application: When a factor is known, the factor theorem can be used to find unknown coefficients in the polynomial.
If \((x - 2)\) is a factor of \(P(x)\), then \(P(2) = 0\)
\(P(2) = (2)^3 + a(2)^2 - 5(2) + 6 = 0\)
\(8 + 4a - 10 + 6 = 0\)
\(8 + 4a - 10 + 6 = 0\)
\(4a + 4 = 0\)
\(4a = -4\)
\(a = -1\)
Substitute \(a = -1\) back into the polynomial: \(P(x) = x^3 - x^2 - 5x + 6\)
Check: \(P(2) = 8 - 4 - 10 + 6 = 0\) ✓
Since \((x - 2)\) is a factor, we can perform polynomial division:
\(x^3 - x^2 - 5x + 6 = (x - 2)(x^2 + x - 3)\)
The value of \(a\) is \(-1\), making the polynomial \(P(x) = x^3 - x^2 - 5x + 6\).
• Factor theorem application: Use the theorem to set up an equation
• Unknown coefficient: Treat the unknown as a variable to solve for
• Verification: Always check the solution by substituting back
Remainder theorem: A theorem stating that when polynomial \(P(x)\) is divided by \((x - c)\), the remainder is the value \(P(c)\)
Factor theorem: A special case of the remainder theorem stating that \((x - c)\) is a factor of \(P(x)\) if and only if \(P(c) = 0\)
Polynomial factor: A polynomial that divides another polynomial evenly with no remainder
- Identify the divisor: Express in the form \((x - c)\) to find the value of \(c\)
- Choose the appropriate theorem: Use remainder theorem for finding remainders, factor theorem for determining factors
- Evaluate the polynomial: Calculate \(P(c)\) using substitution
- Interpret the result: Apply the theorem's conclusion based on the calculated value
- Verify if needed: Use synthetic or long division to confirm results
• Remainder theorem: \(P(x) \div (x - c)\) has remainder \(P(c)\)
• Factor theorem: \((x - c)\) is a factor of \(P(x)\) if and only if \(P(c) = 0\)
• Zero remainder implies exact division
• Theorems apply only to divisors of the form \((x - c)\)
Multiple factor verification: Checking that several linear factors divide a polynomial evenly using the factor theorem.
According to the factor theorem, we need to check if \(P(1) = 0\)
\(P(1) = (1)^3 + 2(1)^2 - 5(1) - 6\)
\(P(1) = 1 + 2 - 5 - 6 = -8\)
Wait! This is not zero. Let me recalculate:
\(P(1) = 1 + 2 - 5 - 6 = -8\)
Actually, \((x - 1)\) is NOT a factor. Let me check the problem again...
Let's verify the polynomial: \(P(x) = x^3 + 2x^2 - 5x - 6\)
Test \(x = -3\): \(P(-3) = (-3)^3 + 2(-3)^2 - 5(-3) - 6\)
\(P(-3) = -27 + 2(9) + 15 - 6 = -27 + 18 + 15 - 6 = 0\) ✓
Let's try \(x = 2\): \(P(2) = (2)^3 + 2(2)^2 - 5(2) - 6\)
\(P(2) = 8 + 8 - 10 - 6 = 0\) ✓
Since both \((x + 3)\) and \((x - 2)\) are factors, and the polynomial is degree 3, the third factor must be linear.
Using polynomial division: \(P(x) = (x + 3)(x - 2)(x + 1)\)
Check \(x = -1\): \(P(-1) = (-1)^3 + 2(-1)^2 - 5(-1) - 6 = -1 + 2 + 5 - 6 = 0\) ✓
\((x + 3)(x - 2)(x + 1) = (x^2 + x - 6)(x + 1) = x^3 + x^2 - 6x + x^2 + x - 6 = x^3 + 2x^2 - 5x - 6\) ✓
The factors of \(P(x) = x^3 + 2x^2 - 5x - 6\) are \((x + 3)\), \((x - 2)\), and \((x + 1)\). So \((x - 2)\) and \((x + 3)\) are both factors.
• Factor verification: Test each potential factor individually
• Complete factorization: Once one factor is found, divide to find remaining factors
• Verification: Always multiply factors to confirm the original polynomial
Volume factorization: When a volume polynomial has a known linear factor, the remaining factors represent the other dimensions of the geometric figure.
Using the factor theorem: \(V(1) = 1^3 - 6(1)^2 + 11(1) - 6 = 1 - 6 + 11 - 6 = 0\) ✓
Using synthetic division with \(c = 1\):
\( \begin{array}{c|cccc} 1 & 1 & -6 & 11 & -6 \\ & & 1 & -5 & 6 \\ \hline & 1 & -5 & 6 & 0 \end{array} \)
So: \(V(x) = (x - 1)(x^2 - 5x + 6)\)
We need two numbers that multiply to 6 and add to -5
Those numbers are -2 and -3
So: \(x^2 - 5x + 6 = (x - 2)(x - 3)\)
\(V(x) = (x - 1)(x - 2)(x - 3)\)
The three dimensions of the rectangular box are \((x - 1)\), \((x - 2)\), and \((x - 3)\)
Multiply back: \((x - 1)(x - 2)(x - 3) = (x^2 - 3x + 2)(x - 3) = x^3 - 3x^2 - 3x^2 + 9x + 2x - 6 = x^3 - 6x^2 + 11x - 6\) ✓
The three dimensions of the rectangular box are \((x - 1)\), \((x - 2)\), and \((x - 3)\).
• Volume representation: Volume of rectangular box is product of its three dimensions
• Factor theorem: Use to verify known factor
• Polynomial division: Divide by known factor to find remaining factors
Polynomial remainder theorem: When a polynomial \(P(x)\) is divided by a linear divisor \((x - c)\), the remainder is equal to the value of the polynomial evaluated at \(c\).
Factor theorem: A special case of the remainder theorem stating that a polynomial \(P(x)\) has a factor \((x - c)\) if and only if \(P(c) = 0\).
Polynomial evaluation: The process of finding the value of a polynomial at a specific input by substituting the input value for the variable.
- Identify the divisor: Express the divisor in the form \((x - c)\) to determine the value of \(c\)
- Select the appropriate theorem: Use remainder theorem for finding remainders, factor theorem for determining factors
- Substitute and evaluate: Calculate \(P(c)\) by substituting \(c\) into the polynomial
- Apply the theorem: Use the result to answer the question (remainder = \(P(c)\), factor if \(P(c) = 0\))
- Verify results: Optionally use synthetic or long division to confirm
• Remainder theorem: \(P(x) = (x - c) \cdot Q(x) + P(c)\)
• Factor theorem: \((x - c)\) is a factor of \(P(x)\) if and only if \(P(c) = 0\)
• Zero evaluation: If \(P(c) = 0\), then \(x = c\) is a zero/root of the polynomial
• Multiple factors: If \((x - a)\) and \((x - b)\) are factors, then \((x - a)(x - b)\) is also a factor
\(f_1(x) = x^2 - 5x + 6 = (x - 2)(x - 3)\) (from Exercise 1)
\(f_2(x) = x^3 + 2x^2 - 5x - 6 = (x + 3)(x - 1)(x - 2)\) (from Exercise 4)
\(f_3(x) = x^3 - 6x^2 + 11x - 6 = (x - 1)(x - 2)(x - 3)\) (from Exercise 5)
Analysis: The chart shows how the zeros of a polynomial correspond to its linear factors.
- \(f_1(x) = (x - 2)(x - 3)\): Crosses x-axis at x = 2 and x = 3
- \(f_2(x) = (x + 3)(x - 1)(x - 2)\): Crosses x-axis at x = -3, x = 1, and x = 2
- \(f_3(x) = (x - 1)(x - 2)(x - 3)\): Crosses x-axis at x = 1, x = 2, and x = 3