Solved Exercises on Long Division and Synthetic Division in Algebra 1

Master polynomial division: long division, synthetic division, remainder theorem, and factor theorem through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Long Division of Polynomials
Exercise 1
Divide using long division: \(\frac{x^3 + 2x^2 - 5x - 6}{x + 2}\). Show all steps of the division process.
Definition:

Polynomial Long Division: A systematic method for dividing one polynomial by another, similar to numerical long division.

Polynomial Long Division Method:
  1. Arrange polynomials in descending order of exponents
  2. Divide the leading term of the dividend by the leading term of the divisor
  3. Multiply the divisor by the result from step 2
  4. Subtract this product from the dividend
  5. Bring down the next term
  6. Repeat steps 2-5 until the remainder has lower degree than the divisor
  7. Write the result as: Dividend = Divisor × Quotient + Remainder
Original
\(\frac{x^3 + 2x^2 - 5x - 6}{x + 2}\)
Division
\(x^2 - 5\)
Remainder
\(4\)
Step 1: Set up the long division

\(\require{enclose} \begin{array}{r} \phantom{(x+2)} \, x^2 - 5 \\ x + 2 \enclose{longdiv}{x^3 + 2x^2 - 5x - 6} \\ \end{array}\)

Step 2: Divide leading terms

\(\frac{x^3}{x} = x^2\)

Write \(x^2\) in the quotient

Step 3: Multiply and subtract

\(x^2 \cdot (x + 2) = x^3 + 2x^2\)

Subtract: \((x^3 + 2x^2) - (x^3 + 2x^2) = 0\)

Bring down \(-5x\)

Step 4: Repeat the process

New dividend: \(-5x - 6\)

\(\frac{-5x}{x} = -5\)

Write \(-5\) in the quotient

Step 5: Multiply and subtract

\(-5 \cdot (x + 2) = -5x - 10\)

Subtract: \((-5x - 6) - (-5x - 10) = -6 + 10 = 4\)

Step 6: Write the final result

Quotient: \(x^2 - 5\)

Remainder: 4

Result: \(x^3 + 2x^2 - 5x - 6 = (x + 2)(x^2 - 5) + 4\)

\(\frac{x^3 + 2x^2 - 5x - 6}{x + 2} = x^2 - 5 + \frac{4}{x + 2}\)
Final answer:

Quotient: \(x^2 - 5\), Remainder: 4

Applied rules:

• Division Algorithm: Dividend = Divisor × Quotient + Remainder

• Like Terms: Combine like terms during subtraction

• Zero Terms: Include all powers even if coefficient is 0

2 Synthetic Division
Exercise 2
Use synthetic division to divide: \(\frac{x^3 - 3x^2 + 4x - 12}{x - 3}\). Verify your result using the remainder theorem.
Definition:

Synthetic Division: A shortcut method for dividing polynomials by linear factors of the form \((x - c)\), using only coefficients.

Original
\(\frac{x^3 - 3x^2 + 4x - 12}{x - 3}\)
Synthetic Setup
\(c = 3\), coefficients: [1, -3, 4, -12]\)
Result
\(x^2 + 4\), remainder: 0
Step 1: Set up synthetic division

Divisor: \(x - 3\), so \(c = 3\)

Coefficients of dividend: \(x^3 - 3x^2 + 4x - 12\) → [1, -3, 4, -12]

Setup: \(3 | 1 \quad -3 \quad 4 \quad -12\)

Step 2: Bring down the first coefficient

\(3 | 1 \quad -3 \quad 4 \quad -12\)

\(\phantom{3 |} \underline{\phantom{1} \quad \phantom{-3} \quad \phantom{4} \quad \phantom{-12}}\)

\(\phantom{3 |} 1\)

Step 3: Multiply and add

Multiply 1 by 3: \(1 \times 3 = 3\)

Add to next coefficient: \(-3 + 3 = 0\)

Now: \(3 | 1 \quad -3 \quad 4 \quad -12\)

\(\phantom{3 |} \underline{\phantom{1} \quad 3 \quad \phantom{0} \quad \phantom{-12}}\)

\(\phantom{3 |} 1 \quad 0\)

Step 4: Continue the process

Multiply 0 by 3: \(0 \times 3 = 0\)

Add to next coefficient: \(4 + 0 = 4\)

Now: \(3 | 1 \quad -3 \quad 4 \quad -12\)

\(\phantom{3 |} \underline{\phantom{1} \quad 3 \quad 0 \quad \phantom{-12}}\)

\(\phantom{3 |} 1 \quad 0 \quad 4\)

Step 5: Complete the division

Multiply 4 by 3: \(4 \times 3 = 12\)

Add to last coefficient: \(-12 + 12 = 0\)

Final result: \(3 | 1 \quad -3 \quad 4 \quad -12\)

\(\phantom{3 |} \underline{\phantom{1} \quad 3 \quad 0 \quad 12}\)

\(\phantom{3 |} 1 \quad 0 \quad 4 \quad 0\)

Step 6: Interpret the result

Quotient coefficients: [1, 0, 4] → \(x^2 + 0x + 4 = x^2 + 4\)

Remainder: 0

So: \(\frac{x^3 - 3x^2 + 4x - 12}{x - 3} = x^2 + 4\)

Step 7: Verify using Remainder Theorem

Remainder Theorem: If dividing by \((x - c)\), remainder is \(P(c)\)

Check: \(P(3) = 3^3 - 3(3^2) + 4(3) - 12 = 27 - 27 + 12 - 12 = 0\) ✓

\(\frac{x^3 - 3x^2 + 4x - 12}{x - 3} = x^2 + 4\) with remainder 0
Final answer:

Quotient: \(x^2 + 4\), Remainder: 0

Applied rules:

• Synthetic Division: Only works for divisors of form \((x - c)\)

• Remainder Theorem: \(P(c)\) is the remainder when dividing by \((x - c)\)

• Factor Theorem: If remainder is 0, then \((x - c)\) is a factor

3 Division with Remainder
Exercise 3
Divide using long division: \(\frac{2x^3 - x^2 + 3x - 7}{x - 1}\). Express the result in the form \(Q(x) + \frac{R}{x - 1}\).
Definition:

Division with Remainder: When the divisor does not divide the dividend evenly, the result includes a remainder term.

Original
\(\frac{2x^3 - x^2 + 3x - 7}{x - 1}\)
Division
\(2x^2 + x + 4\)
Remainder
\(-3\)
Step 1: Set up long division

\(\require{enclose} \begin{array}{r} \phantom{(x-1)} \, 2x^2 + x + 4 \\ x - 1 \enclose{longdiv}{2x^3 - x^2 + 3x - 7} \\ \end{array}\)

Step 2: Divide leading terms

\(\frac{2x^3}{x} = 2x^2\)

Write \(2x^2\) in the quotient

Step 3: Multiply and subtract

\(2x^2 \cdot (x - 1) = 2x^3 - 2x^2\)

Subtract: \((2x^3 - x^2) - (2x^3 - 2x^2) = x^2\)

Bring down \(+3x\)

Step 4: Continue division

New dividend: \(x^2 + 3x\)

\(\frac{x^2}{x} = x\)

Write \(+x\) in the quotient

Step 5: Multiply and subtract

\(x \cdot (x - 1) = x^2 - x\)

Subtract: \((x^2 + 3x) - (x^2 - x) = 4x\)

Bring down \(-7\)

Step 6: Final division step

New dividend: \(4x - 7\)

\(\frac{4x}{x} = 4\)

Write \(+4\) in the quotient

Step 7: Complete the subtraction

\(4 \cdot (x - 1) = 4x - 4\)

Subtract: \((4x - 7) - (4x - 4) = -3\)

Remainder: \(-3\)

Step 8: Write the final result

Quotient: \(2x^2 + x + 4\)

Remainder: \(-3\)

Result: \(\frac{2x^3 - x^2 + 3x - 7}{x - 1} = 2x^2 + x + 4 + \frac{-3}{x - 1}\)

\(2x^2 + x + 4 - \frac{3}{x - 1}\)
Final answer:

Quotient: \(2x^2 + x + 4\), Remainder: \(-3\)

Applied rules:

• Division Algorithm: \(P(x) = D(x) \cdot Q(x) + R(x)\)

• Remainder Degree: Remainder must have degree less than divisor

• Proper Form: Express remainder as a fraction over the divisor

Key Concepts and Division Algorithms
\(P(x) = D(x) \cdot Q(x) + R(x)\)
Division Algorithm for Polynomials
Long Division
Standard algorithm
Works for any divisor
Synthetic Division
\(c | a_n \ldots a_1 a_0\)
Only for linear divisors
Remainder Theorem
\(P(c)\) when dividing by \((x - c)\)
Find remainder quickly
Division Algorithm: For polynomials \(P(x)\) and \(D(x)\), there exist unique polynomials \(Q(x)\) and \(R(x)\) such that \(P(x) = D(x) \cdot Q(x) + R(x)\).
Synthetic Division: Faster method for dividing by linear factors \((x - c)\), using only coefficients.
Factor Theorem: \((x - c)\) is a factor of \(P(x)\) if and only if \(P(c) = 0\).
Remainder Theorem: The remainder when dividing \(P(x)\) by \((x - c)\) is \(P(c)\).
Solution: Exercises 4 to 5
4 Factoring Using Division
Exercise 4
Given that \((x - 2)\) is a factor of \(P(x) = x^3 - 6x^2 + 11x - 6\), use synthetic division to find the other factors completely.
Definition:

Factor Theorem: If \((x - c)\) is a factor of polynomial \(P(x)\), then \(P(c) = 0\), and the remainder when dividing by \((x - c)\) is 0.

Given
\((x - 2)\) is a factor of \(P(x) = x^3 - 6x^2 + 11x - 6\)
Synthetic Division
\(2 | 1 \quad -6 \quad 11 \quad -6\)
Result
\(P(x) = (x - 2)(x^2 - 4x + 3)\)
Step 1: Set up synthetic division with \(c = 2\)

Since \((x - 2)\) is a factor, we divide by 2

Coefficients: [1, -6, 11, -6]

Setup: \(2 | 1 \quad -6 \quad 11 \quad -6\)

Step 2: Bring down the first coefficient

\(2 | 1 \quad -6 \quad 11 \quad -6\)

\(\phantom{2 |} \underline{\phantom{1} \quad \phantom{-6} \quad \phantom{11} \quad \phantom{-6}}\)

\(\phantom{2 |} 1\)

Step 3: Multiply and add repeatedly

\(1 \times 2 = 2\), then \(-6 + 2 = -4\)

\(-4 \times 2 = -8\), then \(11 + (-8) = 3\)

\(3 \times 2 = 6\), then \(-6 + 6 = 0\)

Result: \(2 | 1 \quad -6 \quad 11 \quad -6\)

\(\phantom{2 |} \underline{\phantom{1} \quad 2 \quad -8 \quad 6}\)

\(\phantom{2 |} 1 \quad -4 \quad 3 \quad 0\)

Step 4: Interpret the result

Quotient coefficients: [1, -4, 3] → \(x^2 - 4x + 3\)

Remainder: 0

So: \(P(x) = (x - 2)(x^2 - 4x + 3)\)

Step 5: Factor the quadratic

Factor \(x^2 - 4x + 3\): Find two numbers that multiply to 3 and add to -4

Numbers: -1 and -3 (since \(-1 \times -3 = 3\) and \(-1 + (-3) = -4\))

So: \(x^2 - 4x + 3 = (x - 1)(x - 3)\)

Step 6: Write the complete factorization

\(P(x) = (x - 2)(x - 1)(x - 3)\)

Step 7: Verify the factorization

Check: \((x - 2)(x - 1)(x - 3)\)

First: \((x - 2)(x - 1) = x^2 - x - 2x + 2 = x^2 - 3x + 2\)

Then: \((x^2 - 3x + 2)(x - 3) = x^3 - 3x^2 - 3x^2 + 9x + 2x - 6 = x^3 - 6x^2 + 11x - 6\) ✓

\(x^3 - 6x^2 + 11x - 6 = (x - 1)(x - 2)(x - 3)\)
Final answer:

The complete factorization is \((x - 1)(x - 2)(x - 3)\).

Applied rules:

• Factor Theorem: Use known factor to reduce polynomial degree

• Synthetic Division: Efficient division by linear factors

• Quadratic Factoring: Factor the quotient if possible

5 Application Problem
Exercise 5
The volume of a rectangular prism is given by \(V(x) = x^3 - 2x^2 - 5x + 6\) cubic units. If one dimension is \((x - 1)\) units, find the other two dimensions by factoring the polynomial completely.
Definition:

Volume Application: For a rectangular prism, Volume = Length × Width × Height. Factoring the volume polynomial reveals possible dimensions.

Given
\(V(x) = x^3 - 2x^2 - 5x + 6\), one factor: \((x - 1)\)
Division
\(x^3 - 2x^2 - 5x + 6 = (x - 1)(x^2 - x - 6)\)
Complete Factorization
\((x - 1)(x - 3)(x + 2)\)
Step 1: Use synthetic division with the known factor

Since \((x - 1)\) is a factor, divide by 1

Coefficients: [1, -2, -5, 6]

Setup: \(1 | 1 \quad -2 \quad -5 \quad 6\)

Step 2: Perform synthetic division

\(1 | 1 \quad -2 \quad -5 \quad 6\)

\(\phantom{1 |} \underline{\phantom{1} \quad 1 \quad -1 \quad -6}\)

\(\phantom{1 |} 1 \quad -1 \quad -6 \quad 0\)

Quotient: \(x^2 - x - 6\), Remainder: 0

Step 3: Factor the quadratic quotient

Factor \(x^2 - x - 6\): Find two numbers that multiply to -6 and add to -1

Numbers: -3 and 2 (since \(-3 \times 2 = -6\) and \(-3 + 2 = -1\))

So: \(x^2 - x - 6 = (x - 3)(x + 2)\)

Step 4: Write the complete factorization

\(V(x) = (x - 1)(x - 3)(x + 2)\)

Step 5: Interpret in context

Possible dimensions of the rectangular prism:

Length: \((x - 1)\) units

Width: \((x - 3)\) units

Height: \((x + 2)\) units

Step 6: Verify with a specific value

Let \(x = 4\): Volume = \(4^3 - 2(4^2) - 5(4) + 6 = 64 - 32 - 20 + 6 = 18\)

Dimensions: \((4-1) \times (4-3) \times (4+2) = 3 \times 1 \times 6 = 18\) ✓

Dimensions: \((x - 1)\), \((x - 3)\), and \((x + 2)\) units
Final answer:

The three dimensions of the rectangular prism are \((x - 1)\), \((x - 3)\), and \((x + 2)\) units.

Applied rules:

• Volume Formula: \(V = l \times w \times h\)

• Polynomial Factorization: Use known factor to reduce degree

• Real-World Context: Factors represent physical dimensions

Complete Guide: Polynomial Division Methods
\(P(x) = D(x) \cdot Q(x) + R(x)\)
Fundamental Division Algorithm
Key definitions:

Dividend: The polynomial being divided.

Divisor: The polynomial by which the dividend is divided.

Quotient: The result of the division (excluding remainder).

Remainder: The leftover polynomial after division, with degree less than the divisor.

Factor: A polynomial that divides another polynomial evenly (remainder = 0).

Root/Zeros: Values of x where the polynomial equals zero.

Complete polynomial division methodology:
  1. Arrange terms: Order both dividend and divisor in descending powers of the variable
  2. Select method: Choose long division for general cases or synthetic division for linear divisors
  3. Perform division: Follow the systematic steps for the chosen method
  4. Handle remainder: Express remainder as a fraction over the divisor
  5. Verify result: Multiply quotient by divisor and add remainder to check
  6. Factor if possible: See if the quotient can be factored further
Tip 1: Always arrange polynomials in descending order before dividing.
Tip 2: Include all powers in synthetic division, using 0 for missing terms.
Tip 3: The remainder's degree must be less than the divisor's degree.
Tip 4: Zero remainder means the divisor is a factor of the dividend.
Common errors: Forgetting to include zero coefficients, sign errors in subtraction, misaligning terms, not verifying the result.
Applications: Finding roots, factoring polynomials, simplifying rational expressions, solving polynomial equations.
Essential rules and theorems:

• Division Algorithm: \(P(x) = D(x) \cdot Q(x) + R(x)\)

• Remainder Theorem: Remainder of \(P(x) \div (x - c)\) is \(P(c)\)

• Factor Theorem: \((x - c)\) is a factor of \(P(x)\) iff \(P(c) = 0\)

• Degree Relationship: \(\deg(R) < \deg(D)\)

• Verification: Always check: \(D(x) \cdot Q(x) + R(x) = P(x)\)

Questions & Answers

Question: When should I use long division versus synthetic division for polynomials?

Answer: The choice depends on the form of the divisor:

  • Long Division: Use for any polynomial divisor (linear, quadratic, cubic, etc.)
  • Synthetic Division: Use only when the divisor is a linear factor of the form \((x - c)\) or \((x + c)\)

Examples:
• For \(\frac{x^3 + 2x^2 - 5x + 1}{x - 2}\) → Use synthetic division (linear divisor)
• For \(\frac{x^4 - 3x^3 + x^2 - 7}{x^2 + x - 1}\) → Must use long division (quadratic divisor)
• For \(\frac{x^3 - 8}{x + 2}\) → Use synthetic division (linear divisor)

Synthetic division is faster and less prone to errors when applicable, but long division is the general method that works in all cases.

Question: What is the relationship between the remainder theorem and the factor theorem?

Answer: The Factor Theorem is a special case of the Remainder Theorem:

Remainder Theorem: When dividing \(P(x)\) by \((x - c)\), the remainder is \(P(c)\).

Factor Theorem: \((x - c)\) is a factor of \(P(x)\) if and only if \(P(c) = 0\).

In other words:
• The Remainder Theorem tells you what the remainder is: \(P(c)\)
• The Factor Theorem tells you when the remainder is zero: when \(P(c) = 0\)

So if you use the Remainder Theorem and find that \(P(c) = 0\), then by the Factor Theorem, \((x - c)\) must be a factor of \(P(x)\).

Example: If \(P(3) = 0\) for some polynomial \(P(x)\), then:
• By Remainder Theorem: The remainder when dividing by \((x - 3)\) is 0
• By Factor Theorem: \((x - 3)\) is a factor of \(P(x)\)

Question: How do I know if I've factored a polynomial completely?

Answer: A polynomial is completely factored when:

  1. All factors are prime (cannot be factored further using real coefficients)
  2. All common factors have been removed
  3. Special forms like difference of squares have been applied

For example, \(x^4 - 16\) is NOT completely factored as \((x^2 - 4)(x^2 + 4)\) because \(x^2 - 4\) can be factored further.

The complete factorization is: \(x^4 - 16 = (x - 2)(x + 2)(x^2 + 4)\)

Check each factor:
• \((x - 2)\) is linear → prime
• \((x + 2)\) is linear → prime
• \((x^2 + 4)\) has no real roots → prime over real numbers

So the factorization is complete.