Solved Exercises on Solving Quadratic Equations by Factoring in Algebra 1

Master solving quadratic equations by factoring through these 3 detailed exercises.

Solution: Exercises 1 to 3
1 Basic Factoring
Exercise 1
Solve x² - 7x + 12 = 0 by factoring.
Definition:

Factoring: Rewriting a polynomial as a product of simpler polynomials

Zero Product Property: If ab = 0, then a = 0 or b = 0 (or both)

Factoring method:
  1. Verify the equation is in standard form (ax² + bx + c = 0)
  2. Find two numbers that multiply to c and add to b
  3. Write the quadratic as a product of two binomials
  4. Apply the Zero Product Property
  5. Solve each resulting linear equation
  6. Verify the solutions
Original Equation
x² - 7x + 12 = 0
Factored Form
(x - 3)(x - 4) = 0
Solutions
x = 3, x = 4
Step 1: Verify standard form

x² - 7x + 12 = 0 ✓ (already in standard form)

Step 2: Find two numbers that multiply to 12 and add to -7

Factors of 12: 1×12, 2×6, 3×4

Which pair adds to -7? (-3) + (-4) = -7

So we use -3 and -4

Step 3: Write in factored form

x² - 7x + 12 = (x - 3)(x - 4)

Check: (x - 3)(x - 4) = x² - 4x - 3x + 12 = x² - 7x + 12 ✓

Step 4: Apply Zero Product Property

(x - 3)(x - 4) = 0

This means: x - 3 = 0 OR x - 4 = 0

Step 5: Solve each linear equation

From x - 3 = 0: x = 3

From x - 4 = 0: x = 4

Step 6: Verify solutions

For x = 3: (3)² - 7(3) + 12 = 9 - 21 + 12 = 0 ✓

For x = 4: (4)² - 7(4) + 12 = 16 - 28 + 12 = 0 ✓

Solutions: x = 3, x = 4
Final answer:

The solutions are x = 3 and x = 4

Applied rules:

• Zero Product Property: If ab = 0, then a = 0 or b = 0

• Factoring: Find two numbers that multiply to c and add to b

• Verification: Always substitute solutions back into original equation

2 Difference of Squares
Exercise 2
Solve x² - 25 = 0 by factoring using the difference of squares pattern.
Definition:

Difference of Squares: a² - b² = (a + b)(a - b)

Original Equation
x² - 25 = 0
Factored Form
(x + 5)(x - 5) = 0
Solutions
x = -5, x = 5
Step 1: Recognize the difference of squares pattern

x² - 25 = x² - 5²

This is in the form a² - b² where a = x and b = 5

Step 2: Apply the difference of squares formula

a² - b² = (a + b)(a - b)

x² - 5² = (x + 5)(x - 5)

Step 3: Write the factored equation

(x + 5)(x - 5) = 0

Step 4: Apply Zero Product Property

This means: x + 5 = 0 OR x - 5 = 0

Step 5: Solve each linear equation

From x + 5 = 0: x = -5

From x - 5 = 0: x = 5

Step 6: Verify solutions

For x = -5: (-5)² - 25 = 25 - 25 = 0 ✓

For x = 5: (5)² - 25 = 25 - 25 = 0 ✓

Step 7: Note the symmetry

The solutions are opposites: -5 and 5

This is typical for x² - k² = 0 equations

Solutions: x = -5, x = 5
Final answer:

The solutions are x = -5 and x = 5

Applied rules:

• Difference of Squares Formula: a² - b² = (a + b)(a - b)

• Zero Product Property: Essential for solving factored equations

• Symmetry: x² - k² = 0 always has solutions x = ±k

3 Greatest Common Factor
Exercise 3
Solve 3x² - 12x = 0 by factoring out the greatest common factor (GCF).
Definition:

Greatest Common Factor (GCF): The largest factor that divides all terms of a polynomial

Original Equation
3x² - 12x = 0
GCF Factored
3x(x - 4) = 0
Solutions
x = 0, x = 4
Step 1: Identify the GCF of all terms

Terms: 3x² and -12x

GCF of coefficients: GCF(3, 12) = 3

GCF of variables: GCF(x², x) = x

So GCF = 3x

Step 2: Factor out the GCF

3x² - 12x = 3x(x) - 3x(4) = 3x(x - 4)

So the equation becomes: 3x(x - 4) = 0

Step 3: Apply Zero Product Property

3x(x - 4) = 0

This means: 3x = 0 OR x - 4 = 0

Step 4: Solve each equation

From 3x = 0: x = 0

From x - 4 = 0: x = 4

Step 5: Verify solutions

For x = 0: 3(0)² - 12(0) = 0 - 0 = 0 ✓

For x = 4: 3(4)² - 12(4) = 3(16) - 48 = 48 - 48 = 0 ✓

Step 6: Note the zero solution

When factoring out x, one solution is always x = 0

This is because the equation passes through the origin

Solutions: x = 0, x = 4
Final answer:

The solutions are x = 0 and x = 4

Applied rules:

• GCF Method: Factor out the greatest common factor first

• Zero Product Property: Still applies after factoring out GCF

• Zero Solution: When x is factored out, x = 0 is always a solution

Rules and methods, laws,...
x² + bx + c = (x + p)(x + q)
Basic Factoring
a² - b² = (a + b)(a - b)
Difference of Squares
Basic Factoring
pq = c, p + q = b
Find Factors
Difference of Squares
a² - b²
Special Pattern
GCF Factoring
ax² + bx = x(ax + b)
Factor Out GCF
Key definitions:

Quadratic Equation: An equation of the form ax² + bx + c = 0, where a ≠ 0

Zero Product Property: If the product of two factors is zero, then at least one of the factors must be zero

Greatest Common Factor (GCF): The largest factor that divides all terms in a polynomial

Standard Form: ax² + bx + c = 0

Roots/Solutions: The values of x that satisfy the equation

Factoring methodology:
  1. Standard Form: Ensure equation is in form ax² + bx + c = 0
  2. Look for GCF: Factor out common terms if possible
  3. Identify Pattern: Determine if it's basic factoring, difference of squares, etc.
  4. Factor: Write as product of binomials
  5. Solve: Apply Zero Product Property
  6. Verify: Check solutions in original equation
Tip 1: Always move all terms to one side before factoring.
Tip 2: Look for special patterns like difference of squares first.
Tip 3: Factor out GCF first to simplify the problem.
Tip 4: Always verify solutions by substituting back into the original equation.
Common errors: Forgetting to factor out GCF, missing solutions, sign errors in factoring.
Real-world applications: Projectile motion, optimization problems, geometric problems.
Essential factoring rules:

• Standard Form: Always rearrange to ax² + bx + c = 0 before factoring

• Zero Product Property: Only applies when product equals zero

• Factor Check: Multiply factors to verify they give original expression

• Verification: Always check solutions in original equation

Comprehensive Guide to Solving Quadratic Equations by Factoring
ax² + bx + c = 0 → (px + q)(rx + s) = 0
Factoring Process
Key definitions:

Perfect Square Trinomial: a² + 2ab + b² = (a + b)² or a² - 2ab + b² = (a - b)²

Sum/Difference of Cubes: a³ ± b³ = (a ± b)(a² ∓ ab + b²)

Trinomial Factoring: ax² + bx + c where we find factors of ac that add to b

Prime Polynomial: Cannot be factored over the integers

Complete factoring methodology:
  1. Equation Analysis: Determine the best factoring approach
  2. GCF Check: Factor out common terms first
  3. Pattern Recognition: Identify special patterns (squares, cubes)
  4. Trinomial Factoring: Apply appropriate technique for ax² + bx + c
  5. Solution Finding: Apply Zero Product Property
  6. Verification: Check all solutions in original equation
Tip 1: Look for patterns like difference of squares before attempting general factoring.
Tip 2: When factoring ax² + bx + c, find factors of ac that sum to b.
Tip 3: The discriminant (b² - 4ac) can tell you if factoring over integers is possible.
Tip 4: Count solutions - a quadratic should have at most 2 distinct solutions.
Advantages: Provides exact solutions, works well when solutions are integers or simple fractions.
Applications: Physics (motion equations), engineering (design problems), economics (optimization).
Essential rules:

• GCF Priority: Always factor out GCF first for simplification

• Pattern Recognition: Special patterns factor more easily than general trinomials

• Verification Requirement: Always substitute solutions back to original equation

• Completeness: Ensure you find all possible solutions

Questions & Answers

Question: How do I know when to use the difference of squares pattern?

Answer: Look for these characteristics:

  • Two terms: The expression must have exactly two terms
  • Subtraction: The terms must be separated by a minus sign
  • Perfect squares: Both terms must be perfect squares (like x², 4, 9x², 25, etc.)

Examples of difference of squares:

  • x² - 9 = (x + 3)(x - 3)
  • 4x² - 25 = (2x + 5)(2x - 5)
  • 9x² - 16y² = (3x + 4y)(3x - 4y)

Examples that are NOT difference of squares:

  • x² + 9 (addition, not subtraction)
  • x² - x (not two perfect squares)
  • x² - 7 (7 is not a perfect square)

The pattern is always: a² - b² = (a + b)(a - b)

Question: Why should I factor out the GCF first? Doesn't it give the same answer?

Answer: Factoring out the GCF first is crucial for several reasons:

  • Simplification: Makes the remaining polynomial easier to factor
  • Completeness: Ensures you don't miss the solution that makes the GCF equal to zero
  • Efficiency: Reduces the complexity of the factoring process

Example: 2x² - 8x = 0

Without factoring GCF first:

  • It's harder to recognize that x is a common factor
  • You might try to factor as (2x - ?)(x - ?) which is more complex

With GCF factored first:

  • 2x(x - 4) = 0
  • Solutions: 2x = 0 → x = 0 OR x - 4 = 0 → x = 4
  • You get both solutions clearly

If you skip the GCF, you might miss the x = 0 solution!

Question: What happens if I have more than two factors after factoring?

Answer: The Zero Product Property extends to any number of factors:

  • If abc = 0, then a = 0 OR b = 0 OR c = 0 (or any combination)
  • If a₁ · a₂ · a₃ · ... · aₙ = 0, then at least one of the factors must equal zero

Example: x(x - 2)(x + 3) = 0

  • Three factors: x, (x - 2), and (x + 3)
  • Solutions: x = 0 OR x - 2 = 0 OR x + 3 = 0
  • So x = 0, x = 2, or x = -3

For quadratic equations specifically, you'll always have at most 2 solutions. If you get more than 2 solutions from factoring, you may have made an error or the equation isn't truly quadratic.

The Zero Product Property is fundamental to solving polynomial equations by factoring.

Comprehensive Summary: Solving Quadratic Equations by Factoring

Key Definitions

Quadratic Equation: ax² + bx + c = 0 where a ≠ 0

Zero Product Property: If ab = 0, then a = 0 or b = 0

Difference of Squares: a² - b² = (a + b)(a - b)

GCF: Greatest Common Factor

Standard Form: ax² + bx + c = 0

Core Rules & Laws

Zero Product Property: Essential for solving factored equations

Factoring Patterns: Difference of squares, perfect square trinomials

GCF Rule: Always factor out GCF first for simplification

Verification Rule: Always check solutions in original equation

Standard Form Rule: Rearrange to ax² + bx + c = 0 before factoring

Step-by-Step Methods

Basic Factoring Steps: 1) Standard form, 2) Find factors of c that add to b, 3) Write as binomials, 4) Apply zero property, 5) Solve, 6) Verify

Difference of Squares Steps: 1) Identify a² and b², 2) Apply (a+b)(a-b), 3) Solve each factor

GCF Steps: 1) Find GCF, 2) Factor out, 3) Factor remaining polynomial, 4) Solve all factors

Verification Steps: 1) Substitute each solution, 2) Check equality, 3) Confirm validity

Examples & Applications

Simple Example: x² - 4 = (x+2)(x-2) = 0 → x = ±2

Advanced Example: 2x² - 8x + 6 = 2(x² - 4x + 3) = 2(x-1)(x-3) = 0 → x = 1,3

Physics: Projectile motion equations

Engineering: Structural design problems

Economics: Profit maximization problems

Tips & Common Mistakes

Tip 1: Always move terms to one side before factoring

Tip 2: Look for special patterns first (difference of squares)

Common Mistake: Forgetting to factor out GCF

Common Mistake: Missing solutions by not applying zero property to all factors

Memory Aid: "Find factors that multiply to c and add to b"

Key Takeaways

Method Selection: Choose based on polynomial structure

Zero Property: Foundation for factoring method

Pattern Recognition: Identifies special factoring opportunities

GCF Importance: Critical for complete solution set

Verification Critical: Always check that solutions satisfy original equation