Measures of Central Tendency and Spread in Algebra 1

Master mean, median, mode, and range: essential measures of center and spread for Algebra 1 students.

Solution: Exercises 1 to 3
1 Basic measures
Exercise 1
Find the mean, median, mode, and range of the following test scores: 78, 85, 92, 85, 76, 90, 85, 88, 92, 82.
Definition:

Measures of central tendency: Statistical measures that represent the typical or central value in a dataset. The three main measures are mean (average), median (middle value), and mode (most frequent value). Range: A measure of spread representing the difference between the maximum and minimum values.

Calculation method:
  1. Mean: Add all values and divide by the count
  2. Median: Arrange values in order and find the middle value(s)
  3. Mode: Identify the value(s) that appear most frequently
  4. Range: Subtract the minimum value from the maximum value
  5. Interpret the results in the context of the data
Data set
{76, 78, 82, 85, 85, 85, 88, 90, 92, 92}
Mean
85.4
Median
85
Mode
85
Range
16
Step 1: Organize the data

Raw data: 78, 85, 92, 85, 76, 90, 85, 88, 92, 82
Sorted: 76, 78, 82, 85, 85, 85, 88, 90, 92, 92

Step 2: Calculate the mean

Mean = (sum of all values) / (number of values)
Sum = 76 + 78 + 82 + 85 + 85 + 85 + 88 + 90 + 92 + 92 = 853
Count = 10
Mean = 853/10 = 85.3

Step 3: Find the median

With 10 values (even number), median is average of 5th and 6th values
5th value = 85, 6th value = 85
Median = (85 + 85)/2 = 85

Step 4: Identify the mode

Count frequency of each value:
76: 1, 78: 1, 82: 1, 85: 3, 88: 1, 90: 1, 92: 2
Mode = 85 (appears 3 times, more than any other)

Step 5: Calculate the range

Range = maximum - minimum = 92 - 76 = 16

Step 6: Interpret the results

Mean = 85.3, Median = 85, Mode = 85
All measures of center are close, suggesting a relatively symmetric distribution
Range of 16 shows moderate spread in the scores

Step 7: Verify calculations

Check: Mean ≈ Median ≈ Mode indicates symmetry
Range of 16 is reasonable for test scores spanning from 76 to 92

Mean: 85.3, Median: 85, Mode: 85, Range: 16
Final answer:

Mean = 85.3, Median = 85, Mode = 85, Range = 16

Applied rules:

• Mean formula: x̄ = Σx/n

• Median rule: For even n, average the two middle values

• Mode definition: Value with highest frequency

• Range formula: Range = max - min

Tip 1: Always sort data first when finding median or quartiles.
Tip 2: The mode can be one value, multiple values, or no value.
2 Even number of values
Exercise 2
Find the mean, median, mode, and range of the following data set: 12, 15, 18, 20, 22, 25. Then explain how the median is calculated when there is an even number of values.
Definition:

Even number of values: When a dataset contains an even number of data points, the median is calculated by averaging the two middle values after arranging the data in ascending order.

Data set
{12, 15, 18, 20, 22, 25}
Mean
18.7
Median
19
Mode
None
Range
13
Step 1: Organize the data

Already sorted: 12, 15, 18, 20, 22, 25
Count: 6 values (even number)

Step 2: Calculate the mean

Mean = (12 + 15 + 18 + 20 + 22 + 25) / 6 = 112 / 6 ≈ 18.67 ≈ 18.7

Step 3: Find the median

With 6 values (even number), the median is the average of the 3rd and 4th values
3rd value = 18, 4th value = 20
Median = (18 + 20) / 2 = 38 / 2 = 19

Step 4: Identify the mode

Each value appears exactly once:
12: 1, 15: 1, 18: 1, 20: 1, 22: 1, 25: 1
Since no value appears more than others, there is no mode

Step 5: Calculate the range

Range = maximum - minimum = 25 - 12 = 13

Step 6: Explain median calculation for even n

When n is even, there is no single middle value. Instead, there are two middle positions:
Position 1: n/2 = 6/2 = 3rd value
Position 2: (n/2) + 1 = 3 + 1 = 4th value
The median is the average of these two middle values

Step 7: Interpret results

Mean ≈ 18.7, Median = 19, No mode, Range = 13
Mean and median are close, indicating a relatively symmetric distribution
No mode suggests all values are equally frequent

Mean: 18.7, Median: 19, Mode: None, Range: 13
Final answer:

Mean = 18.7, Median = 19, Mode = None, Range = 13. For even number of values, median is average of two middle values.

Applied rules:

• Even median: Median = (value at n/2 + value at (n/2)+1) / 2

• No mode: When all values have the same frequency

• Range calculation: Always maximum minus minimum

Tip 1: For even n, always average the two middle values for the median.
Tip 2: Remember that a dataset can have no mode if all values appear equally.
3 Multiple modes
Exercise 3
Find the mean, median, mode, and range of the following data set: 5, 7, 7, 9, 9, 10, 12, 12, 15. Explain what it means to have multiple modes.
Definition:

Multiple modes: A dataset has multiple modes when two or more values appear with the same highest frequency. This is called a multimodal distribution. Bimodal: When exactly two values appear most frequently.

Data set
{5, 7, 7, 9, 9, 10, 12, 12, 15}
Mean
9.6
Median
9
Mode
7, 9, 12
Range
10
Step 1: Organize the data

Already sorted: 5, 7, 7, 9, 9, 10, 12, 12, 15
Count: 9 values (odd number)

Step 2: Calculate the mean

Mean = (5 + 7 + 7 + 9 + 9 + 10 + 12 + 12 + 15) / 9 = 86 / 9 ≈ 9.56 ≈ 9.6

Step 3: Find the median

With 9 values (odd number), median is the 5th value
Median = 9

Step 4: Identify the mode

Count frequency of each value:
5: 1, 7: 2, 9: 2, 10: 1, 12: 2, 15: 1
Values 7, 9, and 12 all appear 2 times (highest frequency)
Mode = 7, 9, 12 (trimodal distribution)

Step 5: Calculate the range

Range = maximum - minimum = 15 - 5 = 10

Step 6: Explain multiple modes

When multiple values share the highest frequency, we have multiple modes:
• Unimodal: One mode
• Bimodal: Two modes
• Trimodal: Three modes
• Multimodal: More than one mode
This indicates that the data has multiple common values or clusters

Step 7: Interpret results

Mean ≈ 9.6, Median = 9, Modes = 7, 9, 12, Range = 10
The presence of multiple modes suggests the data has multiple peaks
The trimodal nature indicates three different common values

Mean: 9.6, Median: 9, Modes: 7, 9, 12, Range: 10
Final answer:

Mean = 9.6, Median = 9, Modes = 7, 9, 12 (trimodal), Range = 10. Having multiple modes indicates several values appear with the same highest frequency.

Applied rules:

• Multiple modes: Any value(s) with the highest frequency are modes

• Odd median: For odd n, median is the middle value at position (n+1)/2

• Frequency counting: Tally occurrences of each value

Tip 1: Always count frequencies systematically to identify all modes.
Tip 2: Multiple modes can indicate multiple subgroups in the data.
Rules and methods, laws,...
\(\bar{x} = \frac{\sum x_i}{n}, \text{ Median}, \text{ Mode}, \text{ Range} = \max - \min\)
Core Statistical Measures
Mean
\(\bar{x} = \frac{\sum x_i}{n}\)
Average value
Median
Middle value in ordered data
Resistant to outliers
Mode
Most frequent value
May be multiple or none
Range
\(\max - \min\)
Simple measure of spread
Key definitions:

Mean: The arithmetic average, calculated by adding all values and dividing by the number of values.

Median: The middle value when data is arranged in ascending order. For even number of values, it's the average of the two middle values.

Mode: The value that appears most frequently in a dataset. A dataset may have one mode, multiple modes, or no mode.

Range: The difference between the maximum and minimum values in a dataset.

Measures of central tendency: Statistical measures that describe the center or typical value of a dataset.

Measures of spread: Statistical measures that describe how spread out the values in a dataset are.

Unimodal: A distribution with one mode.

Bimodal: A distribution with two modes.

Trimodal: A distribution with three modes.

Multimodal: A distribution with more than one mode.

Complete methodology:
  1. Organize data: Arrange all values in ascending order
  2. Calculate mean: Add all values and divide by the count
  3. Find median: Locate the middle value(s) in the sorted list
  4. Identify mode: Count frequencies and find the most common value(s)
  5. Compute range: Subtract the minimum from the maximum
  6. Interpret results: Consider what each measure tells about the data
  7. Verify calculations: Double-check arithmetic and logic
Tip 1: Always sort data first when finding median or quartiles.
Tip 2: The mean is sensitive to outliers; median is not.
Tip 3: A dataset can have no mode, one mode, or multiple modes.
Tip 4: Range only considers extreme values, not the whole distribution.
Tip 5: In symmetric distributions, mean ≈ median ≈ mode.
Common errors: Forgetting to sort data before finding median, miscalculating mean by missing values, confusing median calculation for even/odd counts, not recognizing multiple modes, computational errors in arithmetic, not understanding when no mode exists.
Exam preparation: Practice with various data sets, master the differences between measures, understand when each measure is most appropriate, learn to interpret results in context, and memorize formulas.
Formulas to know by heart:

• Mean: x̄ = Σx/n (sum of all values divided by count)

• Median: Middle value for odd n, average of two middle values for even n

• Mode: Value(s) with highest frequency

• Range: Maximum - Minimum

• For odd n: median position = (n+1)/2

• For even n: median = (value at n/2 + value at (n/2)+1) / 2

Solution: Exercises 4 to 5
4 Effect of outliers
Exercise 4
Consider the data set: 10, 12, 14, 15, 16, 18, 100. Calculate the mean, median, and range. Then remove the outlier (100) and recalculate. Explain how the outlier affects each measure.
Definition:

Outlier: A data point that differs significantly from other observations. Outliers can have a disproportionate effect on statistical measures, particularly the mean.

With outlier
Mean = 27.9
Without outlier
Mean = 14.2
Median change
15 → 15 (unchanged)
Step 1: Calculate with outlier included

Data: 10, 12, 14, 15, 16, 18, 100
Mean = (10 + 12 + 14 + 15 + 16 + 18 + 100) / 7 = 185 / 7 ≈ 26.43 ≈ 26.4
Median = 15 (4th value in ordered list of 7 values)
Range = 100 - 10 = 90

Step 2: Calculate without outlier

Data: 10, 12, 14, 15, 16, 18
Mean = (10 + 12 + 14 + 15 + 16 + 18) / 6 = 85 / 6 ≈ 14.17 ≈ 14.2
Median = (14 + 15) / 2 = 14.5 (average of 3rd and 4th values)
Range = 18 - 10 = 8

Step 3: Compare mean values

With outlier: Mean ≈ 26.4
Without outlier: Mean ≈ 14.2
Difference: 26.4 - 14.2 = 12.2
The outlier increased the mean by 12.2 units

Step 4: Compare median values

With outlier: Median = 15
Without outlier: Median = 14.5
Difference: 15 - 14.5 = 0.5
The outlier had minimal effect on the median (only 0.5 units)

Step 5: Compare range values

With outlier: Range = 90
Without outlier: Range = 8
Difference: 90 - 8 = 82
The outlier increased the range by 82 units

Step 6: Analyze sensitivity

Mean is most sensitive to outliers (changed by 12.2)
Range is also sensitive to outliers (changed by 82)
Median is resistant to outliers (changed by only 0.5)

Step 7: Interpret results

The outlier (100) significantly affects the mean and range but has little effect on the median
This demonstrates why median is often preferred over mean when outliers are present

With outlier: Mean=26.4, Median=15, Range=90; Without: Mean=14.2, Median=14.5, Range=8
Final answer:

The outlier significantly affects the mean (from 14.2 to 26.4) and range (from 8 to 90), but has minimal effect on the median (from 14.5 to 15). This shows that the mean and range are sensitive to outliers, while the median is resistant.

Applied rules:

• Outlier sensitivity: Mean and range are sensitive; median is resistant

• Robust statistics: Median is more robust than mean when outliers are present

• Range vulnerability: Range only considers extreme values, making it sensitive to outliers

Tip 1: When outliers are present, median often provides a better representation of central tendency.
Tip 2: Always consider the context to determine if an outlier is a valid data point or an error.
5 Frequency table
Exercise 5
The following frequency table shows the number of hours students spent studying: Hours: 2, 3, 4, 5, 6; Frequency: 3, 5, 8, 4, 2. Calculate the mean, median, and mode of the data.
Definition:

Frequency table: A table showing how often each value occurs in a dataset. For calculating statistics, multiply each value by its frequency before summing.

Data expansion
{2,2,2,3,3,3,3,3,...}
Mean
3.86
Median
4
Mode
4
Step 1: Understand the frequency table

Hours: 2, 3, 4, 5, 6
Frequency: 3, 5, 8, 4, 2
This means: 3 students studied 2 hours, 5 students studied 3 hours, etc.

Step 2: Calculate the mean

For frequency tables, multiply each value by its frequency:
Sum = (2×3) + (3×5) + (4×8) + (5×4) + (6×2)
Sum = 6 + 15 + 32 + 20 + 12 = 85
Total number of students = 3 + 5 + 8 + 4 + 2 = 22
Mean = 85/22 ≈ 3.86 hours

Step 3: Find the median

Total students = 22 (even number)
Need to find the 11th and 12th values in the ordered list
Cumulative frequencies: 3, 8, 16, 20, 22
The 11th and 12th students fall in the group that studied 4 hours
Median = (4 + 4)/2 = 4 hours

Step 4: Identify the mode

The mode is the value with the highest frequency
Hours studied: 2(3), 3(5), 4(8), 5(4), 6(2)
Highest frequency is 8, corresponding to 4 hours
Mode = 4 hours

Step 5: Verify the results

Mean ≈ 3.86, Median = 4, Mode = 4
These values are close, suggesting a relatively symmetric distribution
The mode and median being equal is common in symmetric distributions

Step 6: Interpret in context

Students typically study around 4 hours (mode and median)
The average study time is slightly less (3.86 hours) due to the lower values
The most common study time is 4 hours

Step 7: Alternative approach

We could expand the data set: 2, 2, 2, 3, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 6, 6
Then apply standard methods, but using frequency table formulas is more efficient

Mean: 3.86 hours, Median: 4 hours, Mode: 4 hours
Final answer:

Mean = 3.86 hours, Median = 4 hours, Mode = 4 hours. The most common study time is 4 hours, which is also the median study time.

Applied rules:

• Weighted mean: For frequency tables, multiply each value by its frequency

• Cumulative frequency: Use to find median position in grouped data

• Mode from frequency: Value with highest frequency count

Tip 1: For frequency tables, always multiply value × frequency before summing for the mean.
Tip 2: Use cumulative frequencies to find the position of the median efficiently.
Comprehensive Guide to Measures of Central Tendency and Spread
\(\bar{x} = \frac{\sum x_i}{n}, \text{ Median}, \text{ Mode}, \text{ Range} = \max - \min\)
Statistical Measures Overview
Key definitions:

Mean (x̄): The arithmetic average, calculated by adding all values and dividing by the number of values. Sensitive to outliers.

Median: The middle value when data is arranged in ascending order. Resistant to outliers.

Mode: The value that appears most frequently in a dataset. A dataset may have one mode, multiple modes, or no mode.

Range: The difference between the maximum and minimum values in a dataset. Simple measure of spread.

Measures of central tendency: Statistical measures that describe the center or typical value of a dataset (mean, median, mode).

Measures of spread: Statistical measures that describe how dispersed the values in a dataset are (range, variance, standard deviation).

Frequency table: A table showing how often each value occurs in a dataset.

Outlier: A data point that differs significantly from other observations.

Unimodal: A distribution with one mode.

Bimodal: A distribution with two modes.

Multimodal: A distribution with more than one mode.

Symmetric distribution: A distribution where the left and right sides are approximately mirror images.

Skewed distribution: A distribution where one tail is longer than the other.

Complete methodology:
  1. Data organization: Arrange values in ascending order
  2. Mean calculation: Sum all values and divide by count
  3. Median determination: Find middle value(s) in ordered list
  4. Mode identification: Count frequencies and find most common value(s)
  5. Range computation: Subtract minimum from maximum
  6. Interpretation: Consider what each measure tells about the data
  7. Verification: Check calculations and reasonableness of results
Tip 1: Always sort data first when finding median or quartiles.
Tip 2: Mean is sensitive to outliers; median is resistant.
Tip 3: In symmetric distributions, mean ≈ median ≈ mode.
Tip 4: Range only considers extreme values, not the whole distribution.
Tip 5: For frequency tables, multiply each value by its frequency before summing for mean.
Common errors: Forgetting to sort data before finding median, miscalculating mean by missing values, confusing median calculation for even/odd counts, not recognizing multiple modes, computational errors in arithmetic, not understanding when no mode exists, misinterpreting the effect of outliers.
Exam preparation: Practice with various data sets, master the differences between measures, understand when each measure is most appropriate, learn to interpret results in context, memorize formulas, and become familiar with frequency table calculations.
Formulas to know by heart:

• Mean: x̄ = Σx/n (sum of all values divided by count)

• Median: Middle value for odd n, average of two middle values for even n

• Mode: Value(s) with highest frequency

• Range: Maximum - Minimum

• For odd n: median position = (n+1)/2

• For even n: median = (value at n/2 + value at (n/2)+1) / 2

• Weighted mean for frequency tables: x̄ = Σ(fx)/Σf

Questions & Answers

Question: When should I use mean, median, or mode? How do I know which one is the best measure of center for my data?

Answer: The choice depends on the characteristics of your data:

  • Mean: Use when data is symmetric and free of outliers; when you need to consider all values equally
  • Median: Use when data has outliers or is skewed; when you want the middle value regardless of extreme values
  • Mode: Use for categorical data or when identifying the most common value; less useful for continuous data

As a general rule: if your data is roughly symmetric, use the mean. If it's skewed or has outliers, use the median. The mode is primarily useful for nominal data or when looking for the most frequent category.

Question: How do I find the median from a frequency table? It seems more complicated than from a list of numbers.

Answer: Finding the median from a frequency table involves cumulative frequencies:

  1. Calculate the total number of data points (sum of frequencies)
  2. Find the position of the median: (n+1)/2 for odd n, between n/2 and n/2+1 for even n
  3. Create a cumulative frequency column
  4. Identify which value contains the median position
  5. The median is that value

For example, with total n=20, the median is between the 10th and 11th values. Find which category contains these positions using cumulative frequencies.

Question: What does it mean when a dataset has multiple modes? How should I interpret this?

Answer: Multiple modes indicate that there are several values that appear with the same highest frequency. This often suggests:

  • The data comes from multiple groups or populations
  • The data has multiple peaks or clusters
  • There are different categories or subgroups within the data

For example, if a dataset of ages has modes at 25 and 55, it might indicate two distinct groups (young adults and middle-aged adults). Multiple modes can reveal important patterns in your data that a single mode would miss.

Complete Summary: Measures of Central Tendency and Spread

Definitions and Key Concepts

Mean (x̄): The arithmetic average of a dataset, calculated by adding all values and dividing by the number of values. Formula: x̄ = Σx/n. The mean is sensitive to outliers.

Median: The middle value when data is arranged in ascending order. For an odd number of values, it's the middle value. For an even number of values, it's the average of the two middle values. The median is resistant to outliers.

Mode: The value that appears most frequently in a dataset. A dataset can have one mode (unimodal), more than one mode (bimodal, trimodal, multimodal), or no mode if all values appear with equal frequency.

Range: The difference between the maximum and minimum values in a dataset. Range = Max - Min. It's a simple measure of spread that only considers the extreme values.

Measures of Central Tendency: Statistical measures that describe the center or typical value of a dataset. The three main measures are mean, median, and mode.

Measures of Spread: Statistical measures that describe how dispersed or spread out the values in a dataset are. Examples include range, variance, and standard deviation.

Outlier: A data point that differs significantly from other observations. Outliers can have a disproportionate effect on certain statistical measures, particularly the mean and range.

Frequency Table: A table showing how often each value occurs in a dataset. Each value is paired with its frequency count.

Symmetric Distribution: A distribution where the left and right sides are approximately mirror images. In symmetric distributions, mean ≈ median ≈ mode.

Skewed Distribution: A distribution where one tail is longer than the other. In positively skewed distributions, mean > median > mode. In negatively skewed distributions, mean < median < mode.

Core Rules and Principles

Mean Sensitivity Rule: The mean is affected by every value in the dataset, making it sensitive to outliers. A single extreme value can significantly change the mean.

Median Resistance Principle: The median is resistant to outliers because it only depends on the middle value(s) in an ordered dataset.

Mode Uniqueness: Unlike mean and median, the mode does not require the data to be numeric and may not exist or may not be unique.

Range Limitation: The range only considers the two extreme values and ignores the distribution of the rest of the data.

Odd vs Even n Rule: For odd n, median is the value at position (n+1)/2. For even n, median is the average of values at positions n/2 and (n/2)+1.

Frequency Table Mean: For frequency tables, multiply each value by its frequency before summing: x̄ = Σ(fx)/Σf.

Skewness Indicators: In a positively skewed distribution, mean > median > mode. In a negatively skewed distribution, mean < median < mode.

Step-by-Step Methods

Method 1: Calculating Mean, Median, Mode, and Range

  1. Organize data: Arrange all values in ascending order
  2. Calculate mean: Add all values and divide by the count
  3. Find median: For odd n, pick middle value; for even n, average the two middle values
  4. Identify mode: Count frequency of each value, identify most frequent
  5. Compute range: Subtract minimum from maximum
  6. Interpret results: Consider what each measure tells about the data

Method 2: Working with Frequency Tables

  1. Calculate weighted sum: Multiply each value by its frequency and sum all products
  2. Find total frequency: Sum all frequencies
  3. Compute mean: Divide weighted sum by total frequency
  4. Create cumulative frequency: Add frequencies successively
  5. Locate median position: (n+1)/2 for odd n, between n/2 and n/2+1 for even n
  6. Identify median value: Find which value contains the median position
  7. Find mode: Value with highest frequency

Method 3: Analyzing Effect of Outliers

  1. Calculate measures with outlier: Find mean, median, and range including the outlier
  2. Calculate measures without outlier: Find the same measures excluding the outlier
  3. Compare the results: Note which measures change significantly
  4. Determine sensitivity: Mean and range are typically most affected
  5. Interpret impact: Understand how outliers affect different measures
Multiple Examples

Simple Example: Dataset: 2, 4, 6, 8, 10

  • Mean: (2+4+6+8+10)/5 = 30/5 = 6
  • Median: Middle value = 6
  • Mode: All values appear once, so no mode
  • Range: 10 - 2 = 8

Intermediate Example: Dataset: 1, 3, 3, 5, 7, 7, 7, 9

  • Mean: (1+3+3+5+7+7+7+9)/8 = 42/8 = 5.25
  • Median: Between 4th and 5th values = (5+7)/2 = 6
  • Mode: 7 (appears 3 times)
  • Range: 9 - 1 = 8

Advanced Example (with outlier): Dataset: 10, 12, 14, 15, 16, 18, 100

  • Mean: (10+12+14+15+16+18+100)/7 = 185/7 ≈ 26.4
  • Median: Middle value = 15
  • Mode: All values appear once, so no mode
  • Range: 100 - 10 = 90
  • Note how the outlier (100) significantly affects the mean and range but not the median
Tips, Tricks, and Common Pitfalls

Tips:

  • Always sort data before finding median or quartiles
  • Remember that median is less affected by outliers than mean
  • Use mean for symmetric data, median for skewed data
  • For frequency tables, multiply value × frequency before summing
  • The mode can be used with any type of data (nominal, ordinal, interval, ratio)
  • Range is the simplest measure of spread but least informative
  • When multiple modes exist, report all of them
  • Check if your calculated measures make sense in context

Common Pitfalls:

  • Forgetting to sort data before finding median
  • Computing mean without considering the impact of outliers
  • Assuming every dataset has a mode
  • Using mean for highly skewed data
  • Not recognizing that multiple modes can exist
  • Confusing the formulas for different measures
  • Misinterpreting which measure is most appropriate for a given context
  • Not understanding how to calculate mean from frequency tables
Key Notes for Memorization

Memorize These Formulas:

  • Mean: x̄ = Σx/n
  • Range: Max - Min
  • For odd n: Median position = (n+1)/2
  • For even n: Median = (value at n/2 + value at (n/2)+1) / 2
  • Weighted mean for frequency tables: x̄ = Σ(fx)/Σf

Remember This Pattern: Organize → Calculate → Interpret → Verify

Quick Decision Guide:

  • If data is symmetric: Mean ≈ Median ≈ Mode
  • If data is skewed right: Mean > Median > Mode
  • If data is skewed left: Mean < Median < Mode
  • If outliers present: Use median over mean
  • If categorical data: Use mode
  • If you need all values considered: Use mean

Important Reminders:

  • Mean uses all data points but is sensitive to outliers
  • Median is robust against outliers but uses less information
  • Mode is the only measure that works for all data types
  • Range is easy to compute but only uses two data points
  • Always consider the context when interpreting statistics
  • Multiple modes indicate multiple common values or subgroups
  • Frequency tables require special handling for mean calculation