Solved Exercises on Unit Circle and Trig Values

Master the unit circle and trig values: sine, cosine, tangent, special angles, and quadrantal angles through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Special Angle Values
Exercise 1
Find the exact values of sin(π/3), cos(π/3), and tan(π/3) using the unit circle.
Definition:

Unit Circle: A circle with radius 1 centered at the origin (0,0).

Special Angles: Common angles like π/6, π/4, π/3, π/2, etc., with exact trigonometric values.

Unit Circle Method:
  1. Locate the angle θ on the unit circle
  2. Identify the point (x, y) where the terminal ray intersects the circle
  3. cos(θ) = x-coordinate, sin(θ) = y-coordinate
  4. tan(θ) = sin(θ)/cos(θ) = y/x
Angle
θ = π/3 = 60°
Point on circle
(1/2, √3/2)
Trig values
sin(π/3)=√3/2, cos(π/3)=1/2, tan(π/3)=√3
Step 1: Convert angle to degrees (optional)

π/3 radians = (π/3) × (180°/π) = 60°

Step 2: Locate π/3 on the unit circle

π/3 corresponds to 60° from the positive x-axis

The point on the unit circle at this angle is (1/2, √3/2)

Step 3: Find cosine and sine values

cos(π/3) = x-coordinate = 1/2

sin(π/3) = y-coordinate = √3/2

Step 4: Find tangent value

tan(π/3) = sin(π/3)/cos(π/3) = (√3/2)/(1/2) = √3/2 × 2/1 = √3

Step 5: Verify using special triangle

In a 30-60-90 triangle with hypotenuse 1: short leg = 1/2, long leg = √3/2

This confirms our unit circle values

sin(π/3) = √3/2, cos(π/3) = 1/2, tan(π/3) = √3
Final answer:

sin(π/3) = √3/2, cos(π/3) = 1/2, tan(π/3) = √3

Applied rules:

• Unit Circle Definition: (cos θ, sin θ) are coordinates at angle θ

• Tangent Ratio: tan θ = sin θ/cos θ

• Special Triangle: 30-60-90 triangle relationships

2 Reference Angles
Exercise 2
Find the exact values of sin(5π/4), cos(5π/4), and tan(5π/4) using reference angles.
Definition:

Reference Angle: The acute angle formed between the terminal ray and the nearest x-axis.

Quadrant Signs: The signs of trig functions depend on which quadrant the angle is in.

Angle location
5π/4 = 225° (Quadrant III)
Reference angle
5π/4 - π = π/4
Trig values
sin(5π/4)=-√2/2, cos(5π/4)=-√2/2, tan(5π/4)=1
Step 1: Determine the quadrant

5π/4 radians = (5π/4) × (180°/π) = 225°

Since 180° < 225° < 270°, the angle is in Quadrant III

Step 2: Find the reference angle

In Quadrant III, reference angle = θ - π

Reference angle = 5π/4 - π = 5π/4 - 4π/4 = π/4

Step 3: Find trig values of reference angle

sin(π/4) = √2/2, cos(π/4) = √2/2, tan(π/4) = 1

Step 4: Apply quadrant signs

In Quadrant III: sine is negative, cosine is negative, tangent is positive

sin(5π/4) = -sin(π/4) = -√2/2

cos(5π/4) = -cos(π/4) = -√2/2

tan(5π/4) = tan(π/4) = 1

Step 5: Verify using unit circle point

Point at 5π/4: (-√2/2, -√2/2)

This confirms: cos(5π/4) = -√2/2, sin(5π/4) = -√2/2

sin(5π/4) = -√2/2, cos(5π/4) = -√2/2, tan(5π/4) = 1
Final answer:

sin(5π/4) = -√2/2, cos(5π/4) = -√2/2, tan(5π/4) = 1

Applied rules:

• Reference Angle Formula: Depends on quadrant

• ASTC Rule: All functions positive in I, Sine in II, Tangent in III, Cosine in IV

• Sign Determination: Based on quadrant location

3 Quadrantal Angles
Exercise 3
Find the exact values of sin(3π/2), cos(3π/2), and tan(3π/2).
Definition:

Quadrantal Angles: Angles whose terminal rays lie on the coordinate axes (0, π/2, π, 3π/2, etc.).

Undefined Values: Tangent is undefined when cosine equals zero.

Angle location
3π/2 = 270° (negative y-axis)
Unit circle point
(0, -1)
Trig values
sin(3π/2)=-1, cos(3π/2)=0, tan(3π/2) undefined
Step 1: Convert to degrees (optional)

3π/2 radians = (3π/2) × (180°/π) = 270°

Step 2: Locate the angle on unit circle

3π/2 corresponds to 270°, which points directly downward along the negative y-axis

The intersection point is (0, -1)

Step 3: Read off cosine and sine values

cos(3π/2) = x-coordinate = 0

sin(3π/2) = y-coordinate = -1

Step 4: Calculate tangent

tan(3π/2) = sin(3π/2)/cos(3π/2) = (-1)/0

Division by zero is undefined, so tan(3π/2) is undefined

Step 5: Verify with quadrantal angle patterns

At 3π/2 (270°): sine is -1, cosine is 0, tangent is undefined

This matches our calculated values

sin(3π/2) = -1, cos(3π/2) = 0, tan(3π/2) is undefined
Final answer:

sin(3π/2) = -1, cos(3π/2) = 0, tan(3π/2) is undefined

Applied rules:

• Quadrantal Angles: Have coordinates on axes (±1, 0) or (0, ±1)

• Undefined Tangent: Occurs when cosine equals zero

• Unit Circle Coordinates: (cos θ, sin θ) at angle θ

Unit Circle and Trig Values: Rules and Methods
\(\cos^2\theta + \sin^2\theta = 1\)
Pythagorean Identity
Unit Circle
(cos θ, sin θ)
Coordinates at angle θ
Tangent
tan θ = sin θ/cos θ
Undefined when cos θ = 0
Reference Angle
Acute angle to x-axis
Use for quadrant values
Unit Circle: Radius of 1, center at origin, (cos θ, sin θ) are coordinates at angle θ.
Quadrantal Angles: 0, π/2, π, 3π/2, etc., where terminal ray is on coordinate axes.
Reference Angles: Acute angles that help determine values in other quadrants.
Solution: Exercises 4 to 5
4 Multiple Special Angles
Exercise 4
Find the exact values of sin(7π/6), cos(7π/6), and tan(7π/6).
Definition:

Angle Conversion: Converting between radians and degrees helps visualize the angle's location.

Quadrant Analysis: Determining which quadrant contains the angle to assign proper signs.

Angle location
7π/6 = 210° (Quadrant III)
Reference angle
7π/6 - π = π/6
Trig values
sin(7π/6)=-1/2, cos(7π/6)=-√3/2, tan(7π/6)=√3/3
Step 1: Convert to degrees

7π/6 radians = (7π/6) × (180°/π) = 210°

Step 2: Determine the quadrant

Since 180° < 210° < 270°, the angle is in Quadrant III

Step 3: Find the reference angle

In Quadrant III, reference angle = θ - π

Reference angle = 7π/6 - π = 7π/6 - 6π/6 = π/6

Step 4: Find trig values of reference angle

sin(π/6) = 1/2, cos(π/6) = √3/2, tan(π/6) = 1/√3 = √3/3

Step 5: Apply quadrant signs

In Quadrant III: sine is negative, cosine is negative, tangent is positive

sin(7π/6) = -sin(π/6) = -1/2

cos(7π/6) = -cos(π/6) = -√3/2

tan(7π/6) = tan(π/6) = √3/3

Step 6: Verify using unit circle point

Point at 7π/6: (-√3/2, -1/2)

This confirms: cos(7π/6) = -√3/2, sin(7π/6) = -1/2

sin(7π/6) = -1/2, cos(7π/6) = -√3/2, tan(7π/6) = √3/3
Final answer:

sin(7π/6) = -1/2, cos(7π/6) = -√3/2, tan(7π/6) = √3/3

Applied rules:

• Reference Angle Method: Use reference angle and quadrant signs

• Quadrant III Signs: Sine and cosine are negative, tangent is positive

• Rationalizing: √3/3 is equivalent to 1/√3

5 Periodic Properties
Exercise 5
Find the exact values of sin(13π/4), cos(13π/4), and tan(13π/4) using periodicity.
Definition:

Periodicity: Trigonometric functions repeat their values at regular intervals.

Period of Sine/Cosine: 2π, meaning sin(θ + 2π) = sin(θ) and cos(θ + 2π) = cos(θ).

Reduce angle
13π/4 - 2π = 13π/4 - 8π/4 = 5π/4
Reference angle
5π/4 - π = π/4
Trig values
sin(13π/4)=-√2/2, cos(13π/4)=-√2/2, tan(13π/4)=1
Step 1: Use periodicity to reduce the angle

Sine and cosine have period 2π, so we can subtract multiples of 2π

13π/4 = 13π/4 - 2π = 13π/4 - 8π/4 = 5π/4

Step 2: Determine the quadrant for reduced angle

5π/4 radians = (5π/4) × (180°/π) = 225°

Since 180° < 225° < 270°, the angle is in Quadrant III

Step 3: Find the reference angle

In Quadrant III, reference angle = θ - π

Reference angle = 5π/4 - π = 5π/4 - 4π/4 = π/4

Step 4: Find trig values of reference angle

sin(π/4) = √2/2, cos(π/4) = √2/2, tan(π/4) = 1

Step 5: Apply quadrant signs

In Quadrant III: sine is negative, cosine is negative, tangent is positive

sin(5π/4) = -sin(π/4) = -√2/2

cos(5π/4) = -cos(π/4) = -√2/2

tan(5π/4) = tan(π/4) = 1

Step 6: Apply periodicity

Since 13π/4 and 5π/4 differ by 2π, they have the same trig values

sin(13π/4) = sin(5π/4) = -√2/2

cos(13π/4) = cos(5π/4) = -√2/2

tan(13π/4) = tan(5π/4) = 1

sin(13π/4) = -√2/2, cos(13π/4) = -√2/2, tan(13π/4) = 1
Final answer:

sin(13π/4) = -√2/2, cos(13π/4) = -√2/2, tan(13π/4) = 1

Applied rules:

• Periodicity: sin(θ + 2π) = sin(θ), cos(θ + 2π) = cos(θ)

• Reference Angle Method: Use reference angle and quadrant signs

• Angle Reduction: Subtract multiples of 2π to find coterminal angle

Complete Guide to Unit Circle and Trig Values
\(\sin^2\theta + \cos^2\theta = 1\)
Fundamental Pythagorean Identity
Key definitions:

Unit Circle: A circle with radius 1 centered at the origin (0,0) used to define trigonometric functions for all angles.

Trigonometric Functions: Ratios of sides in right triangles extended to the unit circle: sin θ = y, cos θ = x, tan θ = y/x.

Reference Angle: The acute angle formed between the terminal ray and the nearest x-axis, used to find values in other quadrants.

Complete methodology:
  1. Locate the angle: Determine which quadrant contains the angle
  2. Find reference angle: Calculate the acute angle to the x-axis
  3. Determine signs: Apply quadrant-specific signs for sine, cosine, and tangent
  4. Use special values: Apply known values for common reference angles
  5. Calculate ratios: Apply sin θ = y, cos θ = x, tan θ = y/x
  6. Verify: Check using Pythagorean identity or other relationships
Tip 1: Remember ASTC: All functions positive in I, Sine in II, Tangent in III, Cosine in IV.
Tip 2: Memorize the 30-60-90 and 45-45-90 special triangles for quick reference.
Tip 3: Use periodicity to reduce large angles to equivalent angles between 0 and 2π.
Tip 4: Always check that sin²θ + cos²θ = 1 for verification.
Common errors: Misremembering special angle values, incorrect quadrant signs, forgetting undefined cases.
Exam preparation: Practice all special angles, master reference angle method, memorize key values.
Essential Rules:

• Unit Circle: (cos θ, sin θ) are coordinates at angle θ

• Tangent Definition: tan θ = sin θ/cos θ (undefined when cos θ = 0)

• Periodicity: sin(θ + 2π) = sin(θ), cos(θ + 2π) = cos(θ)

• Pythagorean Identity: sin²θ + cos²θ = 1

Exercise with Visualization: Unit Circle Trigonometry
Exercise 6: Sine and Cosine Functions
Visualize the sine and cosine functions over one full period:
\(f(x) = \sin(x)\)
\(g(x) = \cos(x)\)

Analysis: The chart shows the periodic nature of sine and cosine functions.

  • Sine starts at 0, peaks at π/2, returns to 0 at π, bottoms at 3π/2, and returns to 0 at 2π
  • Cosine starts at 1, drops to 0 at π/2, bottoms at π, returns to 0 at 3π/2, and peaks at 2π
  • Both functions have amplitude 1 and period 2π

Questions & Answers

Question: How do I memorize the special angle values on the unit circle? They seem overwhelming.

Answer: Here's a systematic approach to memorizing special angles:

  1. Memorize the 45°-45°-90° triangle: Legs of 1, hypotenuse of √2 → sin(π/4) = cos(π/4) = √2/2
  2. Memorize the 30°-60°-90° triangle: Short leg 1, long leg √3, hypotenuse 2
  3. Remember the pattern for sine: √0/2, √1/2, √2/2, √3/2, √4/2 for 0°, 30°, 45°, 60°, 90° respectively
  4. Cosine is the reverse pattern: √4/2, √3/2, √2/2, √1/2, √0/2
  5. Use the unit circle symmetry: Once you know first quadrant, apply reference angles and quadrant signs

Visual memory aids:

  • Think of "one, two, three" for sine values: √1/2, √2/2, √3/2
  • Remember that π/6 = 30°, π/4 = 45°, π/3 = 60°
  • Draw the unit circle regularly to reinforce spatial relationships

Question: How do I find reference angles for any given angle? What are the formulas?

Answer: The reference angle is always the acute angle between the terminal ray and the nearest x-axis. Here are the formulas by quadrant:

  1. Quadrant I (0 < θ < π/2): Reference angle = θ
  2. Quadrant II (π/2 < θ < π): Reference angle = π - θ
  3. Quadrant III (π < θ < 3π/2): Reference angle = θ - π
  4. Quadrant IV (3π/2 < θ < 2π): Reference angle = 2π - θ

Examples:

  • For 5π/6 (Quadrant II): Reference angle = π - 5π/6 = π/6
  • For 4π/3 (Quadrant III): Reference angle = 4π/3 - π = π/3
  • For 7π/4 (Quadrant IV): Reference angle = 2π - 7π/4 = π/4

Once you have the reference angle, find its trig values and apply the appropriate signs based on the quadrant.

Question: Why is tangent undefined at certain angles? When does this happen?

Answer: Tangent is undefined whenever the cosine of the angle equals zero, because tan θ = sin θ/cos θ, and division by zero is undefined.

This occurs at quadrantal angles where the terminal ray lies on the y-axis:

  • θ = π/2 (90°): Point on unit circle is (0, 1), so cos(π/2) = 0
  • θ = 3π/2 (270°): Point on unit circle is (0, -1), so cos(3π/2) = 0
  • And all angles coterminal with these (add/subtract multiples of 2π)

At these angles:

  • sin(π/2) = 1 and sin(3π/2) = -1 (well-defined)
  • cos(π/2) = 0 and cos(3π/2) = 0
  • tan(π/2) = 1/0 = undefined and tan(3π/2) = -1/0 = undefined

Graphically, the tangent function has vertical asymptotes at these values.

Question: How do I use periodicity to find trig values for large angles? Can you give an example?

Answer: Sine and cosine have period 2π, meaning they repeat every 2π radians. To find values for large angles:

  1. Divide the angle by 2π: Find how many complete rotations occur
  2. Find the remainder: This is the coterminal angle between 0 and 2π
  3. Evaluate at the remainder: The large angle has the same values as its remainder

Example: Find sin(17π/4)

  • 17π/4 ÷ 2π = 17π/4 × 1/(2π) = 17/8 = 2.125
  • So there are 2 complete rotations plus a remainder
  • Remainder: 17π/4 - 2(2π) = 17π/4 - 16π/4 = π/4
  • Therefore: sin(17π/4) = sin(π/4) = √2/2

Alternative method: Keep subtracting 2π until the result is between 0 and 2π.

Question: How do I remember which trig functions are positive in each quadrant? Is there a trick?

Answer: The most common memory device is "ASTC" - All Students Take Calculus:

  • A - All: In Quadrant I, All trig functions (sin, cos, tan) are positive
  • S - Sine: In Quadrant II, only Sine is positive (cos and tan are negative)
  • T - Tangent: In Quadrant III, only Tangent is positive (sin and cos are negative)
  • C - Cosine: In Quadrant IV, only Cosine is positive (sin and tan are negative)

Alternative ways to remember:

  • Coordinates: In each quadrant, x = cos θ and y = sin θ, so their signs match the coordinate signs
  • Tangent: Since tan θ = sin θ/cos θ, it's positive when sin and cos have the same sign
  • Visual: Draw the unit circle and observe where x and y coordinates are positive/negative

Remember: The reference angle always gives positive values; quadrant signs determine the final sign.