Solved Exercises on Graphing Linear Inequalities in Two Variables in Algebra 1

Master graphing linear inequalities: boundary lines, shading regions, and solution sets through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic Inequality
Exercise 1
Graph the inequality: y > 2x - 3
Definition:

Linear inequality: An inequality that can be written in the form Ax + By < C, Ax + By ≤ C, Ax + By > C, or Ax + By ≥ C. The solution set is a half-plane.

Graphing method:
  1. Graph the boundary line (replace inequality with equals)
  2. Use dashed line for < or >, solid line for ≤ or ≥
  3. Test a point not on the line to determine which side to shade
  4. Shade the region that contains the solutions
Boundary
y = 2x - 3
Line Type
Dashed (>)
Shading
Above line
Step 1: Graph the boundary line

Graph y = 2x - 3 using slope m = 2 and y-intercept b = -3

Step 2: Determine line type

Since the inequality is > (not ≥), draw a dashed line

Step 3: Test a point

Test point (0, 0): 0 > 2(0) - 3 → 0 > -3 ✓

Step 4: Shade the correct region

Since (0, 0) satisfies the inequality, shade the region containing (0, 0)

Step 5: Verify

Points above the line satisfy y > 2x - 3

Shaded region above dashed line y = 2x - 3
Final answer:

The graph shows the region above the dashed line y = 2x - 3

Applied rules:

• Line type: Dashed for strict inequalities (< or >), solid for inclusive (≤ or ≥)

• Test point method: Any point not on the boundary line can be used

• Shading: Shade the region containing points that satisfy the inequality

2 Inclusive Inequality
Exercise 2
Graph the inequality: 3x + 2y ≤ 6
Definition:

Standard form: An inequality written as Ax + By ≤ C, Ax + By ≥ C, Ax + By < C, or Ax + By > C. The boundary line is Ax + By = C.

Standard Form
3x + 2y ≤ 6
Boundary
3x + 2y = 6
Shading
Below line
Step 1: Find intercepts of boundary line

x-intercept: Let y = 0: 3x = 6 → x = 2, point (2, 0)
y-intercept: Let x = 0: 2y = 6 → y = 3, point (0, 3)

Step 2: Draw boundary line

Connect points (2, 0) and (0, 3). Since ≤ includes the boundary, draw a solid line.

Step 3: Test a point

Test point (0, 0): 3(0) + 2(0) ≤ 6 → 0 ≤ 6 ✓

Step 4: Shade the correct region

Since (0, 0) satisfies the inequality, shade the region containing (0, 0)

Step 5: Verify

Points below or on the line satisfy 3x + 2y ≤ 6

Shaded region below solid line 3x + 2y = 6
Final answer:

The graph shows the region below the solid line 3x + 2y = 6 including the line itself

Applied rules:

• Intercept method: Find x and y intercepts to plot boundary line

• Inclusive inequality: Solid line includes boundary points

• Test point: Origin is often easiest to test

3 Horizontal Line
Exercise 3
Graph the inequality: y ≥ -2
Definition:

Horizontal line: An equation of the form y = k, where k is a constant. All points on the line have the same y-coordinate.

Inequality
y ≥ -2
Boundary
y = -2
Shading
Above line
Step 1: Graph the boundary line

Draw horizontal line y = -2 (all points where y = -2)

Step 2: Determine line type

Since the inequality is ≥ (includes equality), draw a solid line

Step 3: Determine shading direction

Since y ≥ -2, we want all points with y-coordinate greater than or equal to -2

Step 4: Shade the correct region

Shade the region above the line y = -2

Step 5: Verify

Any point with y-coordinate ≥ -2 satisfies the inequality

Shaded region above and including the line y = -2
Final answer:

The graph shows the region above the solid horizontal line y = -2 including the line itself

Applied rules:

• Horizontal lines: All points have the same y-coordinate

• Direction of shading: For y ≥ k, shade above; for y ≤ k, shade below

• Line type: ≥ and ≤ use solid lines, < and > use dashed lines

Rules and methods, laws,...
\(Ax + By < C \text{ or } Ax + By \leq C\)
Standard Form of Linear Inequalities
Boundary Line
Ax + By = C
Line separating solution regions
Line Type
Dashed vs Solid
Dashed: < or >, Solid: ≤ or ≥
Test Point
(x₀, y₀) not on boundary
Determines shading region
Key definitions:

Linear inequality in two variables: An inequality that can be written in the form Ax + By < C, Ax + By ≤ C, Ax + By > C, or Ax + By ≥ C, where A, B, and C are constants and A and B are not both zero.

Boundary line: The line formed by replacing the inequality symbol with an equals sign. It divides the coordinate plane into two regions.

Solution set: The set of all points that make the inequality true. Graphically, it's a half-plane.

Half-plane: One of the two regions created when a line divides the coordinate plane.

Strict inequality: Inequalities with < or > symbols (does not include boundary).

Inclusive inequality: Inequalities with ≤ or ≥ symbols (includes boundary).

Complete methodology:
  1. Rewrite in standard form: If necessary, rearrange to get x and y on one side
  2. Graph boundary line: Draw the line Ax + By = C
  3. Determine line type: Use dashed line for < or >, solid line for ≤ or ≥
  4. Select test point: Choose a point not on the boundary line (often (0, 0) if it's not on the line)
  5. Test the point: Substitute coordinates into the original inequality
  6. Shade solution region: Shade the region containing points that satisfy the inequality
  7. Verify: Check that your shading makes sense
Tip 1: When graphing in slope-intercept form (y = mx + b), it's easier to work with the y-term already isolated.
Tip 2: Always use the origin (0, 0) as a test point when it's not on the boundary line.
Tip 3: For y > mx + b, shade above the line; for y < mx + b, shade below the line.
Tip 4: Remember: > and < use dashed lines, ≥ and ≤ use solid lines.
Common errors: Using wrong line type, shading the wrong region, forgetting to include boundary for ≤ or ≥.
Exam preparation: Practice with different forms, memorize line type rules, master test point method.
Solution: Exercises 4 to 5
4 Vertical Line
Exercise 4
Graph the inequality: x < 4
Definition:

Vertical line: An equation of the form x = k, where k is a constant. All points on the line have the same x-coordinate.

Inequality
x < 4
Boundary
x = 4
Shading
Left of line
Step 1: Graph the boundary line

Draw vertical line x = 4 (all points where x = 4)

Step 2: Determine line type

Since the inequality is < (strict), draw a dashed line

Step 3: Determine shading direction

Since x < 4, we want all points with x-coordinate less than 4

Step 4: Shade the correct region

Shade the region to the left of the line x = 4

Step 5: Verify

Any point with x-coordinate < 4 satisfies the inequality

Shaded region to the left of dashed line x = 4
Final answer:

The graph shows the region to the left of the dashed vertical line x = 4

Applied rules:

• Vertical lines: All points have the same x-coordinate

• Direction of shading: For x < k, shade left; for x > k, shade right

• Line type: < and > use dashed lines, ≤ and ≥ use solid lines

5 Slope-Intercept Form
Exercise 5
Graph the inequality: y ≤ -1/2x + 3
Definition:

Slope-intercept form: An equation written as y = mx + b, where m is the slope and b is the y-intercept. This form makes graphing straightforward.

Inequality
y ≤ -1/2x + 3
Boundary
y = -1/2x + 3
Shading
Below line
Step 1: Identify slope and y-intercept

m = -1/2 (slope), b = 3 (y-intercept)

Step 2: Graph the boundary line

Start at y-intercept (0, 3), then use slope -1/2 (down 1, right 2)

Step 3: Determine line type

Since the inequality is ≤ (inclusive), draw a solid line

Step 4: Test a point

Test point (0, 0): 0 ≤ -1/2(0) + 3 → 0 ≤ 3 ✓

Step 5: Shade the correct region

Since (0, 0) satisfies the inequality, shade the region containing (0, 0)

Step 6: Verify

Points below or on the line satisfy y ≤ -1/2x + 3

Shaded region below solid line y = -1/2x + 3
Final answer:

The graph shows the region below the solid line y = -1/2x + 3 including the line itself

Applied rules:

• Slope-intercept form: Makes graphing easy using y-intercept and slope

• Negative slope: Line decreases from left to right

• Inclusive inequality: Solid line includes boundary points

Graphing Linear Inequalities: Comprehensive Summary
\(Ax + By < C \text{ or } Ax + By \leq C\)
Standard Form of Linear Inequalities
Key definitions:

Linear inequality in two variables: An inequality that can be written in the form Ax + By < C, Ax + By ≤ C, Ax + By > C, or Ax + By ≥ C, where A, B, and C are constants and A and B are not both zero.

Boundary line: The line formed by replacing the inequality symbol with an equals sign (Ax + By = C). It separates the coordinate plane into two half-planes.

Solution set: The set of all ordered pairs (x, y) that make the inequality true. Graphically represented by a shaded region.

Half-plane: One of the two regions created when a line divides the coordinate plane. The solution set is one of these half-planes.

Strict inequality: Uses < or > symbols. The boundary line is not included in the solution set (dashed line).

Inclusive inequality: Uses ≤ or ≥ symbols. The boundary line is included in the solution set (solid line).

Complete graphing procedure:
  1. Identify the form: Recognize if it's in slope-intercept (y = mx + b) or standard form (Ax + By = C)
  2. Graph boundary line: Draw the line Ax + By = C using appropriate method
  3. Determine line type: Use dashed for strict inequalities (<, >), solid for inclusive (≤, ≥)
  4. Select test point: Choose a point not on the boundary line (often (0, 0) if available)
  5. Test the point: Substitute coordinates into original inequality to see if true
  6. Shade solution region: Shade the half-plane containing points that satisfy the inequality
  7. Verify: Check that your graph makes sense and follows the rules
Tip 1: For inequalities in y-form (y < mx + b), remember: > shades above, < shades below.
Tip 2: For x-form inequalities (x < k), > shades right, < shades left.
Tip 3: Always use the origin (0, 0) as a test point unless it's on the boundary line.
Tip 4: Remember: < and > use dashed lines, ≤ and ≥ use solid lines.
Tip 5: If the test point satisfies the inequality, shade that side; otherwise, shade the opposite side.
Common error patterns: Using wrong line type, shading wrong region, forgetting to include boundary for ≤ or ≥, choosing test point on boundary line.
Key concepts to remember: Boundary line divides plane into two regions; test point determines which region to shade; line type depends on inequality symbol.
Important rules:

• Line type rule: Strict inequalities (<, >) → dashed line; inclusive inequalities (≤, ≥) → solid line

• Shading rule for y-form: y > mx + b → shade above; y < mx + b → shade below

• Shading rule for x-form: x > k → shade right; x < k → shade left

• Test point rule: If test point satisfies inequality, shade that region; otherwise, shade opposite region

• Boundary inclusion: Solid lines include boundary points; dashed lines exclude them

Questions & Answers

Question: How do I know whether to use a dashed or solid line when graphing linear inequalities?

Answer: The type of line depends on the inequality symbol:

  • Use dashed line: For strict inequalities (< or >), where the boundary line itself is NOT part of the solution set
  • Use solid line: For inclusive inequalities (≤ or ≥), where the boundary line IS part of the solution set

Think of it this way: if the inequality includes "equals" (≤ or ≥), the line itself satisfies the condition and should be included (solid). If it doesn't include "equals" (< or >), the line doesn't satisfy the condition and should be excluded (dashed).

Example: For y > 2x + 1, use a dashed line because points on y = 2x + 1 don't satisfy y > 2x + 1. For y ≥ 2x + 1, use a solid line because points on y = 2x + 1 do satisfy y ≥ 2x + 1.

Question: Why do we test a point that's not on the boundary line? Can't I just shade above or below based on the inequality symbol?

Answer: Testing a point is the most reliable method because it works regardless of the form of the inequality. While there are shortcuts for specific forms, the test point method always works:

  • Testing a point: Substituting coordinates into the inequality definitively tells you whether a region satisfies the condition
  • Shortcuts can fail: When the inequality is rearranged or not in slope-intercept form, the "above/below" rule might not apply

For example, in 2x - 3y < 6, you can't immediately tell if you should shade above or below just from the inequality symbol. You need to test a point.

The origin (0, 0) is often the easiest test point: 2(0) - 3(0) < 6 → 0 < 6 ✓, so shade the side containing (0, 0).

This method prevents errors and builds conceptual understanding.

Question: I keep getting confused with horizontal and vertical lines. How do I graph inequalities like x > 3 or y ≤ -1?

Answer: Horizontal and vertical lines have special characteristics:

Vertical lines (x = k):

  • All points have the same x-coordinate (k)
  • For x > k: shade to the right
  • For x < k: shade to the left
  • For x ≥ k: solid line, shade to the right
  • For x ≤ k: solid line, shade to the left

Horizontal lines (y = k):

  • All points have the same y-coordinate (k)
  • For y > k: shade above
  • For y < k: shade below
  • For y ≥ k: solid line, shade above
  • For y ≤ k: solid line, shade below

For x > 3: Draw a dashed vertical line at x = 3 and shade everything to the right of it.

For y ≤ -1: Draw a solid horizontal line at y = -1 and shade everything below it (including the line).