Absolute value: The distance from zero on a number line, denoted |x|. It represents magnitude regardless of direction.
- Identify starting and ending positions
- Calculate each segment distance using |ending - starting|
- Sum all distances traveled
Distance from 150 to 80: |80 - 150| = |-70| = 70 miles
Distance from 80 to 120: |120 - 80| = |40| = 40 miles
Total distance = 70 + 40 = 110 miles
The truck traveled a total distance of 110 miles.
• Absolute value: Distance = |ending point - starting point|
• Direction independence: Distance is always positive
• Segmentation: Break complex paths into simpler segments
Tolerance: Allowable deviation from a standard value, expressed as |actual - expected| ≤ tolerance
Temperature is within 8°F of average (72°F): |T - 72| ≤ 8
|T - 72| ≤ 8 means -8 ≤ T - 72 ≤ 8
Adding 72 to all parts: -8 + 72 ≤ T ≤ 8 + 72
Therefore: 64 ≤ T ≤ 80
The temperature ranged from 64°F to 80°F
The temperature was between 64°F and 80°F, inclusive.
• Within tolerance: |x - expected| ≤ tolerance
• Absolute value inequality: |x| ≤ a → -a ≤ x ≤ a
• Real-world interpretation: Convert mathematical result back to context
Manufacturing tolerance: Allowable deviation from specified dimensions, typically expressed as |measured - target| ≤ tolerance
Target diameter = 1.5 cm, Tolerance = 0.02 cm
If d is the actual diameter, then |d - 1.5| ≤ 0.02
|d - 1.5| ≤ 0.02 means -0.02 ≤ d - 1.5 ≤ 0.02
Adding 1.5 to all parts: -0.02 + 1.5 ≤ d ≤ 0.02 + 1.5
Therefore: 1.48 ≤ d ≤ 1.52
Bolts with diameters between 1.48 cm and 1.52 cm are acceptable
Bolts with diameters between 1.48 cm and 1.52 cm are acceptable.
• Tolerance equation: |measured - target| ≤ allowed_deviation
• Compound inequality: |x| ≤ a → -a ≤ x ≤ a
• Quality control: Real-world application of tolerance limits
Absolute value: The non-negative value of a number without regard to its sign
Tolerance: Acceptable deviation from a target value
Distance: The absolute difference between two values
- Identify the context: Determine if the problem involves distance, tolerance, or variation
- Set up the equation: Express the relationship using absolute value
- Solve systematically: Convert absolute value to compound inequality
- Interpret results: Connect mathematical solution back to real-world context
• Distance: |a - b| represents distance between a and b
• Tolerance: |x - target| ≤ tolerance
• Variation: |x - average| ≤ allowed_variation
• |x| ≤ a → -a ≤ x ≤ a (when a > 0)
• |x| ≥ a → x ≤ -a or x ≥ a (when a > 0)
Speed tolerance: Permissible deviation from posted speed limit, often used for traffic enforcement discretion
Target speed = 65 mph, Tolerance = 5 mph
If s is the actual speed, then |s - 65| ≤ 5
|s - 65| ≤ 5 means -5 ≤ s - 65 ≤ 5
Adding 65 to all parts: -5 + 65 ≤ s ≤ 5 + 65
Therefore: 60 ≤ s ≤ 70
Acceptable speeds range from 60 mph to 70 mph
Acceptable speeds are between 60 mph and 70 mph, inclusive.
• Tolerance modeling: |actual - target| ≤ allowed_deviation
• Compound inequality: Converting |x| ≤ a to -a ≤ x ≤ a
• Real-world constraints: Speeds must be non-negative
Percentage tolerance: Tolerance expressed as a percentage of the target value: (tolerance/target) × 100%
Target weight = 2.5 lbs, Maximum variation = 0.1 lbs
If w is the actual weight, then |w - 2.5| ≤ 0.1
|w - 2.5| ≤ 0.1 means -0.1 ≤ w - 2.5 ≤ 0.1
Adding 2.5 to all parts: -0.1 + 2.5 ≤ w ≤ 0.1 + 2.5
Therefore: 2.4 ≤ w ≤ 2.6
Percentage tolerance = (0.1/2.5) × 100% = 0.04 × 100% = 4%
Acceptable weights are between 2.4 lbs and 2.6 lbs, with a 4% tolerance.
• Tolerance equation: |actual - target| ≤ allowed_deviation
• Percentage calculation: (deviation/target) × 100%
• Compound inequality: Solving |x| ≤ a → -a ≤ x ≤ a
Absolute value: The distance of a number from zero on the number line
Tolerance: Allowable deviation from a specified value
Distance: The absolute difference between two quantities
Variation: Deviation from an expected or average value
- Context identification: Recognize whether problem involves distance, tolerance, or variation
- Variable definition: Define variables that represent unknown quantities
- Equation setup: Translate verbal descriptions into absolute value expressions
- Systematic solving: Convert absolute value inequalities to compound inequalities
- Result interpretation: Connect mathematical solution back to real-world scenario
- Verification: Check if solution makes sense in the given context
• Distance formula: |a - b| measures distance between points a and b
• Tolerance model: |x - target| ≤ tolerance defines acceptable range
• Compound inequality conversion: |x| ≤ a → -a ≤ x ≤ a (when a > 0)
• Alternative conversion: |x| ≥ a → x ≤ -a or x ≥ a (when a > 0)
• Percentage tolerance: (allowed_deviation/target) × 100%
• Distance: |x - 3| ≤ 2
• Tolerance: |T - 72| ≤ 8
• Variation: |s - 65| ≤ 5
Analysis: The chart demonstrates how absolute value inequalities create symmetric ranges around target values.
- Distance: Values within 2 units of 3 → range [1, 5]
- Temperature: Within 8°F of 72°F → range [64, 80]
- Speed: Within 5 mph of 65 mph → range [60, 70]