Slope-intercept form: The linear equation form y = mx + b, where m is the slope and b is the y-intercept
Slope (m): The rate of change of y with respect to x, calculated as rise over run
Y-intercept (b): The point where the line crosses the y-axis (when x = 0)
- Identify m and b: From y = mx + b, identify slope and y-intercept
- Plot y-intercept: Mark point (0, b) on the y-axis
- Use slope: From y-intercept, move rise units vertically and run units horizontally to find another point
- Draw line: Connect the points with a straight line
- Find x-intercept: Set y = 0 and solve for x
- Verify: Check that the x-intercept point satisfies the equation
Comparing y = -2x + 5 with y = mx + b:
Slope (m) = -2
Y-intercept (b) = 5
So the y-intercept point is (0, 5)
Mark the point (0, 5) on the y-axis
Slope = -2 = -2/1, which means "down 2, right 1"
Starting from (0, 5): move down 2 units (to y = 3) and right 1 unit (to x = 1)
This gives us the point (1, 3)
From (1, 3), use slope again: down 2, right 1
This gives us the point (2, 1)
Draw a straight line through points (0, 5), (1, 3), and (2, 1)
Set y = 0 in the equation: 0 = -2x + 5
2x = 5
x = 5/2 = 2.5
So the x-intercept is (2.5, 0)
Substitute x = 2.5 into the original equation:
y = -2(2.5) + 5 = -5 + 5 = 0 ✓
Slope: -2, Y-intercept: (0, 5), X-intercept: (2.5, 0). The line passes through these points.
• Slope-intercept identification: m is coefficient of x, b is constant term
• Graphing using slope: Rise over run method from known point
• Intercept finding: Set opposite variable to zero and solve
Point-slope form: The linear equation form y - y₁ = m(x - x₁), where (x₁, y₁) is a point on the line and m is the slope
Using the point (3, -2) and slope m = 4/3:
y - (-2) = (4/3)(x - 3)
y + 2 = (4/3)(x - 3)
y + 2 = (4/3)(x - 3)
y + 2 = (4/3)x - 4
y = (4/3)x - 4 - 2
y = (4/3)x - 6
Starting with y = (4/3)x - 6
Multiply everything by 3 to eliminate fractions: 3y = 4x - 18
Rearrange to standard form (Ax + By = C): 4x - 3y = 18
Plot the point (3, -2)
Use slope 4/3: from (3, -2), move up 4 units and right 3 units to reach (6, 2)
Draw a line through these points
In y = (4/3)x - 6, the y-intercept is -6
So the y-intercept point is (0, -6)
Set y = 0 in y = (4/3)x - 6:
0 = (4/3)x - 6
(4/3)x = 6
x = 6 × (3/4) = 18/4 = 4.5
So the x-intercept is (4.5, 0)
Check that (3, -2) satisfies 4x - 3y = 18:
4(3) - 3(-2) = 12 + 6 = 18 ✓
Point-slope: y + 2 = (4/3)(x - 3), Slope-intercept: y = (4/3)x - 6, Standard: 4x - 3y = 18. The line passes through (3, -2) with slope 4/3.
• Point-slope form: Use when you know one point and the slope
• Form conversion: Use algebraic manipulation to change forms
• Fraction elimination: Multiply by LCD to clear fractions in standard form
Standard form: The linear equation form Ax + By = C, where A, B, and C are integers and A is typically positive
Set y = 0: 3x + 4(0) = 12
3x = 12
x = 4
X-intercept: (4, 0)
Set x = 0: 3(0) + 4y = 12
4y = 12
y = 3
Y-intercept: (0, 3)
Mark points (4, 0) and (0, 3) on the coordinate plane
Draw a straight line through the two intercept points
Starting with 3x + 4y = 12
Subtract 3x from both sides: 4y = -3x + 12
Divide by 4: y = (-3/4)x + 3
In y = (-3/4)x + 3:
Slope: m = -3/4
Y-intercept: b = 3 (which matches our y-intercept of (0, 3))
From y-intercept (0, 3), use slope -3/4: move down 3, right 4
This should bring us to (4, 0), which is our x-intercept ✓
X-intercept: (4, 0), Y-intercept: (0, 3). In slope-intercept form: y = (-3/4)x + 3.
• Intercept method: Find x-int (set y=0) and y-int (set x=0), then draw line through them
• Standard to slope-intercept: Solve for y to convert forms
• Verification: Use slope to confirm the relationship between intercepts
Linear equation: An equation that forms a straight line when graphed, with the highest power of variables being 1.
Slope: The measure of steepness of a line, calculated as the ratio of vertical change (rise) to horizontal change (run).
Y-intercept: The point where the line crosses the y-axis (when x = 0).
X-intercept: The point where the line crosses the x-axis (when y = 0).
Graphing: The process of representing an equation visually on a coordinate plane.
- Slope-intercept method: Use y-intercept and slope to plot points
- Intercept method: Find x and y intercepts, then draw line through them
- Table method: Create a table of values and plot corresponding points
- Point-slope method: Use a known point and the slope to find other points
• Positive slope: Line rises from left to right
• Negative slope: Line falls from left to right
• Zero slope: Horizontal line
• Undefined slope: Vertical line
• Parallel lines: Same slope, different y-intercept
• Perpendicular lines: Slopes are negative reciprocals
Slope-intercept (y = mx + b): Reveals slope m and y-intercept b directly
Point-slope (y - y₁ = m(x - x₁)): Uses one point and the slope
Standard (Ax + By = C): General form with integer coefficients
Intercept (x/a + y/b = 1): Uses x-intercept a and y-intercept b
Linear cost function: A linear equation representing the relationship between production quantity and total cost, typically in the form C(x) = mx + b
The function C(x) = 15x + 800 is in slope-intercept form y = mx + b
Slope (m) = 15
Y-intercept (b) = 800
When x = 0 (no items produced), C(0) = 15(0) + 800 = 800
Plot the point (0, 800) - this represents the fixed costs
Slope = 15 means for each additional item, cost increases by $15
From (0, 800), if x increases by 20: C(20) = 15(20) + 800 = 300 + 800 = 1100
Plot the point (20, 1100)
When x = 40: C(40) = 15(40) + 800 = 600 + 800 = 1400
Plot the point (40, 1400)
Extend the line from (0, 800) through the other points up to x = 100
At x = 100: C(100) = 15(100) + 800 = 1500 + 800 = 2300
Endpoint: (100, 2300)
Slope = 15 means the cost increases by $15 for each additional item produced
This represents the variable cost per item
Y-intercept = 800 means when no items are produced (x = 0), the cost is $800
This represents the fixed costs (rent, utilities, salaries, etc.) that exist regardless of production
The graph is a line with slope 15 passing through (0, 800). The slope of 15 represents $15 variable cost per item, and the y-intercept of 800 represents $800 fixed costs.
• Linear cost model: C(x) = variable_cost_rate × x + fixed_costs
• Context interpretation: Apply mathematical results to real-world scenario
• Graphing domain: Consider practical limits of the independent variable
Parallel lines: Lines in the same plane that never intersect and have equal slopes
Perpendicular lines: Lines that intersect at right angles, with slopes that are negative reciprocals
Convert 2x + 3y = 6 to slope-intercept form:
3y = -2x + 6
y = (-2/3)x + 2
So the slope of the original line is m = -2/3
Parallel lines have equal slopes
So the parallel line also has slope m = -2/3
Using point-slope form with point (2, 5):
y - 5 = (-2/3)(x - 2)
y - 5 = (-2/3)x + 4/3
y = (-2/3)x + 4/3 + 5
y = (-2/3)x + 4/3 + 15/3
y = (-2/3)x + 19/3
Perpendicular lines have slopes that are negative reciprocals
If m₁ = -2/3, then m₂ = -1/m₁ = -1/(-2/3) = 3/2
Using point-slope form with point (2, 5):
y - 5 = (3/2)(x - 2)
y - 5 = (3/2)x - 3
y = (3/2)x - 3 + 5
y = (3/2)x + 2
Check: (-2/3) × (3/2) = -6/6 = -1 ✓
Parallel line: y = (-2/3)(2) + 19/3 = -4/3 + 19/3 = 15/3 = 5 ✓
Perpendicular line: y = (3/2)(2) + 2 = 3 + 2 = 5 ✓
Parallel: y = (-2/3)x + 19/3 → 3y = -2x + 19 → 2x + 3y = 19
Perpendicular: y = (3/2)x + 2 → 2y = 3x + 4 → 3x - 2y = -4
(a) Parallel line: y = (-2/3)x + 19/3 or 2x + 3y = 19
(b) Perpendicular line: y = (3/2)x + 2 or 3x - 2y = -4
• Parallel lines: Equal slopes (m₁ = m₂)
• Perpendicular lines: Slope product equals -1 (m₁ × m₂ = -1)
• Point-slope form: y - y₁ = m(x - x₁)
Linear equation: An equation of the form Ax + By = C where A, B, and C are constants and x and y are variables. When graphed, it produces a straight line.
Slope: The measure of the steepness of a line, calculated as the change in y divided by the change in x between any two points on the line (m = Δy/Δx).
Y-intercept: The point where the line crosses the y-axis, occurring when x = 0. It's the value of y when x = 0.
X-intercept: The point where the line crosses the x-axis, occurring when y = 0. It's the value of x when y = 0.
Graphing: The process of creating a visual representation of an equation by plotting points that satisfy the equation on a coordinate plane.
Coordinate plane: A two-dimensional plane formed by the intersection of a vertical line (y-axis) and a horizontal line (x-axis).
- Identify the form: Determine if the equation is in slope-intercept, point-slope, or standard form
- Choose appropriate method: Select the most efficient graphing method based on the form
- Find key points: Calculate intercepts or use slope to find multiple points
- Plot points: Mark the calculated points on the coordinate plane
- Draw the line: Connect the points with a straight line extending in both directions
- Verify: Check that additional points satisfy the equation
• Two points determine a line: Only two points are needed to draw a straight line
• Slope interpretation: Positive slope rises left to right, negative slope falls left to right
• Parallel condition: Lines with equal slopes are parallel
• Perpendicular condition: Lines with slopes that multiply to -1 are perpendicular
• Form flexibility: Any linear equation can be converted to any other form
Domain: All real numbers (-∞, ∞) for all linear functions
Range: All real numbers (-∞, ∞) for non-horizontal lines
Continuity: Linear functions are continuous everywhere
Monotonicity: Increasing if m > 0, decreasing if m < 0, constant if m = 0
Linearity: Constant rate of change (slope) between any two points
• Standard to Slope-Intercept: Solve for y to isolate the variable
• Point-Slope to Slope-Intercept: Distribute and combine like terms
• Slope-Intercept to Standard: Move x term to left side, clear fractions if needed
• Verification: Substitute points back into original equation to confirm accuracy