Point-slope form: y - y₁ = m(x - x₁), where m is the slope and (x₁, y₁) is a point on the line
Standard form: Ax + By = C, where A, B, and C are integers and A is typically positive
Slope-intercept form: y = mx + b, where m is the slope and b is the y-intercept
- Substitute into point-slope form: Use the given point and slope
- Convert to slope-intercept: Solve for y to isolate it
- Convert to standard form: Move variables to one side and constants to the other
- Eliminate fractions: Multiply by LCD if necessary
- Verify: Check that the original point satisfies all forms
Using the formula y - y₁ = m(x - x₁)
With point (3, -2) and slope m = 4/3:
y - (-2) = (4/3)(x - 3)
y + 2 = (4/3)(x - 3)
Start with: y + 2 = (4/3)(x - 3)
Distribute the slope: y + 2 = (4/3)x - (4/3)·3
y + 2 = (4/3)x - 4
Subtract 2 from both sides: y = (4/3)x - 4 - 2
y = (4/3)x - 6
Start with: y = (4/3)x - 6
Multiply everything by 3 to eliminate fractions: 3y = 4x - 18
Subtract 4x from both sides: -4x + 3y = -18
Multiply by -1 to make A positive: 4x - 3y = 18
Check point (3, -2) in all forms:
Point-slope: (-2) + 2 = (4/3)(3 - 3) → 0 = 0 ✓
Slope-intercept: (-2) = (4/3)(3) - 6 → -2 = 4 - 6 → -2 = -2 ✓
Standard: 4(3) - 3(-2) = 12 + 6 = 18 ✓
From y = (4/3)x - 6: slope = 4/3, y-intercept = -6
From 4x - 3y = 18: A = 4, B = -3, C = 18
Point-slope: y + 2 = (4/3)(x - 3), Slope-intercept: y = (4/3)x - 6, Standard: 4x - 3y = 18.
• Point-slope formula: y - y₁ = m(x - x₁) for point (x₁, y₁) and slope m
• Form conversion: Use algebraic manipulation to change forms
• Fraction elimination: Multiply by LCD to clear fractional coefficients
Parallel lines: Two lines that have the same slope and never intersect
Convert 3x - 4y = 12 to slope-intercept form:
-4y = -3x + 12
y = (3/4)x - 3
So the slope of the reference line is m = 3/4
Parallel lines have equal slopes
So the slope of our new line is also m = 3/4
Using point (2, 7) and slope m = 3/4:
y - 7 = (3/4)(x - 2)
Start with: y - 7 = (3/4)(x - 2)
Distribute: y - 7 = (3/4)x - 3/2
Add 7: y = (3/4)x - 3/2 + 7
y = (3/4)x - 3/2 + 14/2
y = (3/4)x + 11/2
Start with: y = (3/4)x + 11/2
Multiply by 4: 4y = 3x + 22
Rearrange: -3x + 4y = 22
Multiply by -1: 3x - 4y = -22
Check that point (2, 7) satisfies all forms:
Point-slope: 7 - 7 = (3/4)(2 - 2) → 0 = 0 ✓
Slope-intercept: 7 = (3/4)(2) + 11/2 = 3/2 + 11/2 = 14/2 = 7 ✓
Standard: 3(2) - 4(7) = 6 - 28 = -22 ✓
Point-slope: y - 7 = (3/4)(x - 2), Slope-intercept: y = (3/4)x + 11/2, Standard: 3x - 4y = -22.
• Parallel lines: Have equal slopes (m₁ = m₂)
• Point-slope form: y - y₁ = m(x - x₁)
• Form conversion: Use algebraic manipulation to change forms
Standard form: The linear equation form Ax + By = C, where A, B, and C are integers and A is typically positive
Start with: y = -2x + 5
Add 2x to both sides: 2x + y = 5
This is in standard form where A = 2, B = 1, C = 5
The y-intercept occurs when x = 0
Substitute x = 0 into the original equation: y = -2(0) + 5 = 5
Y-intercept: (0, 5)
The x-intercept occurs when y = 0
Substitute y = 0 into the original equation: 0 = -2x + 5
2x = 5
x = 5/2
X-intercept: (5/2, 0) or (2.5, 0)
Y-intercept (x = 0): 2(0) + y = 5 → y = 5 ✓
X-intercept (y = 0): 2x + 0 = 5 → x = 5/2 ✓
Plot the y-intercept (0, 5)
Plot the x-intercept (2.5, 0)
Draw a straight line through these two points
Using the intercepts (0, 5) and (2.5, 0):
Slope = (0 - 5)/(2.5 - 0) = -5/2.5 = -2 ✓
This matches the slope in the original equation
Standard form: 2x + y = 5. X-intercept: (2.5, 0). Y-intercept: (0, 5).
• Standard form conversion: Move x and y terms to one side, constants to the other
• Intercept finding: Set opposite variable to zero and solve
• Intercept method: Efficient for graphing standard form equations
Point-slope form: The linear equation form y - y₁ = m(x - x₁), where (x₁, y₁) is a point on the line and m is the slope. This form is ideal when you know one point and the slope.
Standard form: The linear equation form Ax + By = C, where A, B, and C are integers and A is typically positive. This form is useful for certain applications and theoretical work.
Slope-intercept form: The linear equation form y = mx + b, where m is the slope and b is the y-intercept. This form makes slope and y-intercept immediately visible.
Linear equation: An equation that forms a straight line when graphed, with the highest power of variables being 1.
Parallel lines: Lines in the same plane that never intersect, having equal slopes but different y-intercepts.
Perpendicular lines: Lines that intersect at right angles, with slopes that are negative reciprocals of each other.
- Identify the target form: Determine which form you need to convert to
- Isolate variables: Rearrange the equation to group x and y terms
- Clear fractions: Multiply by the least common denominator if needed
- Make A positive: Ensure the coefficient of x is positive in standard form
- Arrange in order: Put in the required format (Ax + By = C)
- Verify: Check that the new form is equivalent to the original
• Point-slope to slope-intercept: Distribute and simplify: y - y₁ = m(x - x₁) → y = mx + b
• Slope-intercept to standard: Move x term to left side: y = mx + b → -mx + y = b → mx - y = -b
• Standard to slope-intercept: Solve for y: Ax + By = C → y = (-A/B)x + (C/B)
• Fraction clearing: Multiply entire equation by LCD of all fractions
• Sign management: Ensure A is positive in standard form by multiplying by -1 if needed
Point-slope form: Directly shows a point on the line and the slope; easy to graph from a known point and slope
Slope-intercept form: Immediately shows slope and y-intercept; easiest for graphing and understanding behavior
Standard form: Useful for systems of equations; integer coefficients; theoretical applications; finding intercepts easily
• Algebraic manipulation: Add/subtract same quantity to both sides
• Multiplication: Multiply both sides by same non-zero value
• Distribution: Apply distributive property to eliminate parentheses
• Combining like terms: Add coefficients of like terms
• Verification: Always check that your new equation is equivalent to the original
Perpendicular lines: Two lines that intersect at a right angle (90°), with slopes that are negative reciprocals of each other
Convert 2x + 3y = 6 to slope-intercept form:
3y = -2x + 6
y = (-2/3)x + 2
So the slope of the reference line is m₁ = -2/3
Perpendicular lines have slopes that are negative reciprocals: m₂ = -1/m₁
m₂ = -1/(-2/3) = 3/2
Using point (-1, 4) and slope m = 3/2:
y - 4 = (3/2)(x - (-1))
y - 4 = (3/2)(x + 1)
Start with: y - 4 = (3/2)(x + 1)
Distribute: y - 4 = (3/2)x + 3/2
Add 4: y = (3/2)x + 3/2 + 4
y = (3/2)x + 3/2 + 8/2
y = (3/2)x + 11/2
Start with: y = (3/2)x + 11/2
Multiply by 2: 2y = 3x + 11
Subtract 3x: -3x + 2y = 11
Multiply by -1: 3x - 2y = -11
Check that slopes are negative reciprocals: (-2/3) × (3/2) = -6/6 = -1 ✓
Check that (-1, 4) satisfies all forms:
Point-slope: 4 - 4 = (3/2)(-1 + 1) → 0 = 0 ✓
Slope-intercept: 4 = (3/2)(-1) + 11/2 = -3/2 + 11/2 = 8/2 = 4 ✓
Standard: 3(-1) - 2(4) = -3 - 8 = -11 ✓
Point-slope: y - 4 = (3/2)(x + 1), Slope-intercept: y = (3/2)x + 11/2, Standard: 3x - 2y = -11.
• Perpendicular slopes: m₁ × m₂ = -1
• Negative reciprocal: If m₁ = a/b, then m₂ = -b/a
• Point-slope form: y - y₁ = m(x - x₁)
Two-point form: A method of finding a line equation when given two points on the line, using the slope formula first
Using the slope formula: m = (y₂ - y₁)/(x₂ - x₁)
With points (1, 3) and (4, 9):
m = (9 - 3)/(4 - 1) = 6/3 = 2
Using point (1, 3) and slope m = 2:
y - 3 = 2(x - 1)
Start with: y - 3 = 2(x - 1)
Distribute: y - 3 = 2x - 2
Add 3: y = 2x - 2 + 3
y = 2x + 1
Start with: y = 2x + 1
Subtract 2x: -2x + y = 1
Multiply by -1: 2x - y = -1
Or rearrange: 2x - y - 1 = 0
Check (1, 3): 2(1) - 3 = 2 - 3 = -1 ✓
Check (4, 9): 2(4) - 9 = 8 - 9 = -1 ✓
Using the other point (4, 9) in point-slope form:
y - 9 = 2(x - 4)
y - 9 = 2x - 8
y = 2x + 1
This gives the same slope-intercept form, confirming our answer
Point-slope: y - 3 = 2(x - 1), Slope-intercept: y = 2x + 1, Standard: 2x - y = -1.
• Slope formula: m = (y₂ - y₁)/(x₂ - x₁)
• Point-slope form: Use either point with calculated slope
• Form consistency: All forms represent the same line
Point-slope form: The linear equation form y - y₁ = m(x - x₁), where (x₁, y₁) is a known point on the line and m is the slope. This form is particularly useful when you know one point and the slope of the line.
Standard form: The linear equation form Ax + By = C, where A, B, and C are integers, and A is typically positive. This form is useful for solving systems of equations and theoretical applications.
Slope-intercept form: The linear equation form y = mx + b, where m is the slope and b is the y-intercept. This form makes the slope and y-intercept immediately visible.
Linear equation: An equation of degree one that represents a straight line when graphed on a coordinate plane.
Conversion: The process of transforming a linear equation from one form to another using algebraic operations while maintaining the same solution set.
- Identify current form: Recognize the existing form of the equation
- Identify target form: Determine the desired form to convert to
- Apply algebraic operations: Use addition, subtraction, multiplication, or division to rearrange
- Clear fractions: Multiply by LCD if fractional coefficients exist
- Ensure standard requirements: Make A positive and ensure integer coefficients
- Verify equivalence: Check that both forms represent the same line
• Point-slope to slope-intercept: Distribute and solve for y
• Slope-intercept to standard: Move x term to left side, ensure A is positive
• Standard to slope-intercept: Solve for y: y = (-A/B)x + (C/B)
• Parallel lines: Equal slopes (m₁ = m₂)
• Perpendicular lines: Slope product equals -1 (m₁ × m₂ = -1)
Use point-slope form when: You know a point and the slope of the line
Use slope-intercept form when: You want to quickly identify slope and y-intercept
Use standard form when: Working with systems of equations or when integer coefficients are preferred
For graphing: Slope-intercept form is often most convenient
For solving systems: Standard form is often most convenient
• Point substitution: Verify that known points satisfy all forms of the equation
• Slope verification: Check that the slope is consistent across different forms
• Intercept verification: Ensure intercepts are consistent across forms
• Algebraic equivalence: Show that one form can be algebraically manipulated to another
• Graphical verification: Plot both forms to ensure they represent the same line