Solved Exercises on Slope and Intercept in Grade 10

Master slope and intercept: linear equations, rate of change, graphing techniques, and real-world applications through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Finding Slope and Intercepts
Exercise 1
Find the slope, x-intercept, and y-intercept of the line 3x + 4y = 12. Then graph the line using the intercepts.
Definitions:

Slope (m): The rate of change of y with respect to x, calculated as rise over run: m = (y₂ - y₁)/(x₂ - x₁)

Y-intercept: The point where the line crosses the y-axis (when x = 0)

X-intercept: The point where the line crosses the x-axis (when y = 0)

Solution method:
  1. Convert to slope-intercept form: Solve for y to get y = mx + b
  2. Identify slope and y-intercept: From y = mx + b, m is slope, b is y-intercept
  3. Find x-intercept: Set y = 0 and solve for x
  4. Verify: Check that the intercepts satisfy the original equation
  5. Graph: Plot the intercepts and draw the line
Equation
3x + 4y = 12
Slope
m = -3/4
Intercepts
y-int: (0,3), x-int: (4,0)
Step 1: Convert to slope-intercept form

Starting with: 3x + 4y = 12

Subtract 3x from both sides: 4y = -3x + 12

Divide by 4: y = (-3/4)x + 3

Step 2: Identify the slope

In the form y = mx + b, the coefficient of x is the slope

So m = -3/4

Step 3: Identify the y-intercept

In the form y = mx + b, the constant term is the y-intercept

So b = 3, meaning y-intercept is (0, 3)

Step 4: Find the x-intercept

Set y = 0 in the original equation: 3x + 4(0) = 12

3x = 12

x = 4

So x-intercept is (4, 0)

Step 5: Verify the intercepts

Check (0, 3): 3(0) + 4(3) = 0 + 12 = 12 ✓

Check (4, 0): 3(4) + 4(0) = 12 + 0 = 12 ✓

Step 6: Graph the line

Plot points (0, 3) and (4, 0), then draw a straight line through them

The line has a negative slope of -3/4, meaning it falls from left to right

Slope: -3/4, Y-int: (0, 3), X-int: (4, 0)
Final answer:

Slope: -3/4, Y-intercept: (0, 3), X-intercept: (4, 0).

Applied rules:

• Slope-intercept form: y = mx + b reveals slope m and y-intercept b

• Intercept finding: Set opposite variable to zero and solve

• Linear graphing: Two points determine a unique line

TIP: To find intercepts, set the other variable to zero. The x-intercept has form (a, 0), y-intercept has form (0, b).
2 Rate of Change Application
Exercise 2
A company's profit decreased from $45,000 in January to $33,000 in April. If the decrease was linear, find the slope of the line representing profit over time. Interpret the slope in context.
Definition:

Rate of change: The slope of a line, representing how much the dependent variable changes per unit change in the independent variable

Points
(1, 45000), (4, 33000)
Slope
m = -$4000/month
Interpretation
Loss of $4000 per month
Step 1: Define variables and assign coordinates

Let x = month number (January = 1, April = 4)

Let y = profit in dollars

Point 1: (1, 45000) - January profit

Point 2: (4, 33000) - April profit

Step 2: Apply the slope formula

m = (y₂ - y₁)/(x₂ - x₁)

m = (33000 - 45000)/(4 - 1)

m = -12000/3 = -4000

Step 3: Interpret the slope

The slope m = -4000 means the profit decreases by $4,000 per month

Since the slope is negative, the profit is decreasing over time

Step 4: Find the equation of the line

Using point-slope form with point (1, 45000):

y - 45000 = -4000(x - 1)

y = -4000x + 4000 + 45000

y = -4000x + 49000

Step 5: Predict future values

For May (x = 5): y = -4000(5) + 49000 = -20000 + 49000 = $29,000

If the trend continues, profit would be $29,000 in May

Step 6: Find when profit reaches zero

Set y = 0: 0 = -4000x + 49000

4000x = 49000

x = 49000/4000 = 12.25

Profit would reach zero in month 12.25 (between December and January of next year)

Slope: -4000, Interpretation: Decrease of $4000 per month
Final answer:

The slope is -4000, meaning the company's profit decreases by $4,000 per month.

Applied rules:

• Slope formula: m = (change in y)/(change in x)

• Rate of change: Slope represents the rate at which one quantity changes with respect to another

• Sign interpretation: Positive slope = increase, negative slope = decrease

TIP: In real-world contexts, always include units in your slope interpretation (e.g., dollars per month, miles per hour).
3 Parallel and Perpendicular Lines
Exercise 3
Find the equation of a line that passes through point (2, -1) and is (a) parallel to the line 2x - 3y = 6, and (b) perpendicular to the same line.
Definition:

Parallel lines: Lines with the same slope but different y-intercepts

Perpendicular lines: Lines with slopes that are negative reciprocals of each other (m₁ × m₂ = -1)

Reference line
2x - 3y = 6 → y = (2/3)x - 2
Parallel line
y = (2/3)x - 7/3
Perpendicular line
y = (-3/2)x + 2
Step 1: Find the slope of the reference line

Convert 2x - 3y = 6 to slope-intercept form:

-3y = -2x + 6

y = (2/3)x - 2

So the slope of the reference line is m = 2/3

Step 2: Find the parallel line equation

Parallel lines have equal slopes

So the parallel line has slope m = 2/3

Using point-slope form with point (2, -1):

y - (-1) = (2/3)(x - 2)

y + 1 = (2/3)x - 4/3

y = (2/3)x - 4/3 - 1

y = (2/3)x - 4/3 - 3/3

y = (2/3)x - 7/3

Step 3: Find the perpendicular line equation

Perpendicular lines have slopes that are negative reciprocals

If m₁ = 2/3, then m₂ = -1/m₁ = -1/(2/3) = -3/2

Using point-slope form with point (2, -1):

y - (-1) = (-3/2)(x - 2)

y + 1 = (-3/2)x + 3

y = (-3/2)x + 3 - 1

y = (-3/2)x + 2

Step 4: Verify the perpendicularity

Check: (2/3) × (-3/2) = -6/6 = -1 ✓

Step 5: Verify both lines pass through (2, -1)

Parallel line: y = (2/3)(2) - 7/3 = 4/3 - 7/3 = -3/3 = -1 ✓

Perpendicular line: y = (-3/2)(2) + 2 = -3 + 2 = -1 ✓

Step 6: Express in standard form if needed

Parallel: y = (2/3)x - 7/3 → 3y = 2x - 7 → 2x - 3y = 7

Perpendicular: y = (-3/2)x + 2 → 2y = -3x + 4 → 3x + 2y = 4

Parallel: y = (2/3)x - 7/3, Perpendicular: y = (-3/2)x + 2
Final answer:

(a) Parallel line: y = (2/3)x - 7/3 or 2x - 3y = 7

(b) Perpendicular line: y = (-3/2)x + 2 or 3x + 2y = 4

Applied rules:

• Parallel lines: m₁ = m₂

• Perpendicular lines: m₁ × m₂ = -1

• Point-slope form: y - y₁ = m(x - x₁)

TIP: To find the negative reciprocal of a fraction a/b, flip it and change the sign: -b/a.
Slope and Intercept Essentials
\(m = \frac{y_2 - y_1}{x_2 - x_1}\)
Slope Formula
Slope-Intercept
\(y = mx + b\)
Slope and y-intercept
Point-Slope
\(y - y_1 = m(x - x_1)\)
Point and slope
Standard
\(Ax + By = C\)
General form
Key definitions:

Slope (m): A measure of the steepness of a line, calculated as the ratio of vertical change (rise) to horizontal change (run) between any two points on the line.

Y-intercept (b): The y-coordinate of the point where the line crosses the y-axis (when x = 0).

X-intercept: The x-coordinate of the point where the line crosses the x-axis (when y = 0).

Rate of change: The slope of a line representing how one quantity changes with respect to another.

Linear function: A function whose graph is a straight line, expressible in the form f(x) = mx + b.

Slope and Intercept Finding Process:
  1. Identify the form: Determine if the equation is in slope-intercept, point-slope, or standard form
  2. Convert if necessary: Transform to a form that reveals slope and intercepts
  3. Extract slope: Identify the coefficient of x in slope-intercept form
  4. Find y-intercept: Identify the constant term in slope-intercept form
  5. Find x-intercept: Set y = 0 and solve for x
  6. Verify: Check that intercepts satisfy the original equation
Tip 1: A positive slope rises from left to right, negative slope falls from left to right.
Tip 2: Horizontal lines have slope 0, vertical lines have undefined slope.
Tip 3: For parallel lines, slopes are equal; for perpendicular lines, slopes are negative reciprocals.
Tip 4: Always verify your answers by substituting back into the original equation.
Common errors: Confusing rise and run, sign errors when subtracting coordinates, incorrect intercept identification, forgetting to check solutions.
Memorization aids: "RISE over RUN" for slope, "X-int when Y=0", "Y-int when X=0", "Parallel=SAME slope, Perpendicular=NEGATIVE RECIPROCAL".
Slope Relationships:

• Positive slope: Line rises from left to right (m > 0)

• Negative slope: Line falls from left to right (m < 0)

• Zero slope: Horizontal line (m = 0)

• Undefined slope: Vertical line (denominator = 0)

• Parallel lines: Same slope (m₁ = m₂)

• Perpendicular lines: Product of slopes is -1 (m₁ × m₂ = -1)

Line Forms:

Slope-intercept: y = mx + b (reveals slope and y-intercept)

Point-slope: y - y₁ = m(x - x₁) (uses one point and slope)

Standard: Ax + By = C (general form, A and B not both zero)

Intercept form: x/a + y/b = 1 (uses x and y intercepts)

Solution: Exercises 4 to 5
4 Graphing and Analysis
Exercise 4
Given the linear function f(x) = -2x + 6, find the slope and y-intercept. Then graph the function and determine the x-intercept. Find the value of x when f(x) = 10.
Definition:

Linear function: A polynomial function of degree 1, whose graph is a straight line

Function
f(x) = -2x + 6
Slope
m = -2
Intercepts
y-int: (0,6), x-int: (3,0)
Step 1: Identify slope and y-intercept

The function is in slope-intercept form: f(x) = mx + b

Comparing with f(x) = -2x + 6:

Slope: m = -2

Y-intercept: b = 6, so y-intercept is (0, 6)

Step 2: Find the x-intercept

Set f(x) = 0: 0 = -2x + 6

2x = 6

x = 3

So x-intercept is (3, 0)

Step 3: Graph the function

Plot the y-intercept (0, 6)

Use the slope to find another point: from (0, 6), move down 2 units and right 1 unit to reach (1, 4)

Draw a line through these points

Step 4: Find x when f(x) = 10

Set f(x) = 10: 10 = -2x + 6

10 - 6 = -2x

4 = -2x

x = -2

Step 5: Verify the solution

Check: f(-2) = -2(-2) + 6 = 4 + 6 = 10 ✓

Step 6: Analyze the function behavior

Since slope is negative (m = -2), the function is decreasing

For every 1 unit increase in x, f(x) decreases by 2 units

Slope: -2, Y-int: (0, 6), X-int: (3, 0), f(x)=10 when x=-2
Final answer:

Slope: -2, Y-intercept: (0, 6), X-intercept: (3, 0). When f(x) = 10, x = -2.

Applied rules:

• Slope-intercept identification: Coefficient of x is slope, constant term is y-intercept

• Intercept finding: Set opposite variable to zero

• Function evaluation: Replace x with input value to find output

TIP: Use the slope to generate additional points for graphing: slope = rise/run.
5 Data Analysis
Exercise 5
The table shows the temperature (in °C) at different altitudes (in km). Find the slope of the line of best fit and interpret it. Estimate the temperature at sea level (altitude 0 km).
Altitude (km) Temperature (°C)
1 8
2 2
3 -4
4 -10
Definition:

Line of best fit: A straight line that best represents the relationship between two variables in a scatter plot

Data
(1,8), (2,2), (3,-4), (4,-10)
Slope
m = -6°C/km
Sea level temp
T = 14°C
Step 1: Select two representative points

Using the first and last data points: (1, 8) and (4, -10)

Step 2: Calculate the slope

m = (y₂ - y₁)/(x₂ - x₁)

m = (-10 - 8)/(4 - 1) = -18/3 = -6

Step 3: Interpret the slope

The slope is -6°C/km, meaning temperature decreases by 6°C for every 1 km increase in altitude

This is consistent with the atmospheric lapse rate

Step 4: Find the y-intercept (temperature at sea level)

Using point-slope form with point (1, 8):

T - 8 = -6(A - 1)

T = -6A + 6 + 8 = -6A + 14

At sea level (A = 0): T = -6(0) + 14 = 14°C

Step 5: Verify with another point

At A = 2: T = -6(2) + 14 = -12 + 14 = 2°C ✓

This matches the data point (2, 2)

Step 6: Predict for other altitudes

At A = 5: T = -6(5) + 14 = -30 + 14 = -16°C

The model predicts -16°C at 5 km altitude

Slope: -6°C/km, Sea level temp: 14°C, T = -6A + 14
Final answer:

The slope is -6°C/km, meaning temperature decreases by 6°C per kilometer of altitude. The estimated temperature at sea level is 14°C.

Applied rules:

• Scatter plot analysis: Find trend using representative data points

• Linear modeling: Use slope to represent rate of change

• Extrapolation: Extend the linear model to predict values outside the data range

TIP: When modeling real data, choose points that represent the overall trend rather than outliers.
Detailed Summary: Slope and Intercept
\(\text{If } m_1 \cdot m_2 = -1, \text{ then lines are perpendicular}\)
Perpendicular Lines Condition
Comprehensive Definitions:

Slope: A numerical measure of the steepness and direction of a line, calculated as the ratio of vertical change to horizontal change between any two points on the line. The slope indicates how much the dependent variable changes per unit change in the independent variable.

Y-intercept: The point where a line crosses the y-axis, occurring when x = 0. It represents the initial value or starting point of a linear relationship.

X-intercept: The point where a line crosses the x-axis, occurring when y = 0. It represents the value of x when the dependent variable equals zero.

Rate of change: The slope of a line in a real-world context, representing how quickly one quantity changes in relation to another.

Linear equation: An equation of the form Ax + By = C that represents a straight line when graphed on a coordinate plane.

Linear Analysis Process:
  1. Identify the equation form: Recognize slope-intercept, point-slope, or standard form
  2. Extract key parameters: Identify slope and intercepts from the equation
  3. Calculate if needed: Use formulas to find missing information
  4. Graph the line: Use slope and intercepts to create an accurate graph
  5. Interpret in context: Understand what the slope and intercepts mean in the problem
  6. Verify solutions: Check that all points satisfy the original equation
Tip 1: Always check that your slope makes sense: positive for rising lines, negative for falling lines.
Tip 2: Use the slope to find additional points: from any point, move rise units vertically and run units horizontally.
Tip 3: When finding intercepts, set the other variable to zero and solve.
Tip 4: In real-world problems, the y-intercept often represents an initial value or fixed cost.
Tip 5: Remember that vertical lines have undefined slope and horizontal lines have zero slope.
Common errors: Sign errors in slope calculation, confusing x and y intercepts, misapplying parallel/perpendicular rules, arithmetic mistakes in rearranging equations.
Memory aids: "RISE over RUN" for slope, "X-int when Y=0", "Y-int when X=0", "Same slope = parallel", "Negative reciprocal = perpendicular".
Critical Slope Properties:

• Slope calculation: m = (y₂ - y₁)/(x₂ - x₁) for any two points on the line

• Parallel lines: Two lines are parallel if and only if their slopes are equal

• Perpendicular lines: Two lines are perpendicular if and only if their slopes are negative reciprocals

• Vertical lines: Undefined slope (form: x = a)

• Horizontal lines: Zero slope (form: y = b)

Linear Equation Forms:

Slope-intercept form: y = mx + b - Reveals slope m and y-intercept b directly

Point-slope form: y - y₁ = m(x - x₁) - Uses one point and the slope

Standard form: Ax + By = C - General form, useful for certain applications

Intercept form: x/a + y/b = 1 - Uses x-intercept a and y-intercept b

Graphing Techniques:

• Using intercepts: Plot x and y intercepts and draw line through them

• Using slope and y-intercept: Plot y-intercept and use slope to find another point

• Using any two points: Plot both points and draw line through them

• Verification: Check that the line passes through both intercepts

Questions & Answers

Question: How do I know which form of a linear equation to use?

Answer: Choose the form based on what information you have and what you need:

  • Slope-intercept (y = mx + b): Use when you know the slope and y-intercept
  • Point-slope (y - y₁ = m(x - x₁)): Use when you know a point and the slope
  • Standard (Ax + By = C): Use for general form, or when working with integer coefficients
  • Intercept form (x/a + y/b = 1): Use when you know both intercepts

As a general rule, convert to slope-intercept form to easily identify slope and y-intercept for graphing and analysis.

Question: Why is the slope of perpendicular lines the negative reciprocal?

Answer: This relationship comes from the geometric properties of perpendicular lines:

When two lines are perpendicular, they form a 90° angle. If one line has slope m₁, the other line (rotated 90°) will have a slope that is the negative reciprocal.

Mathematically, if line 1 has slope m₁ = rise/run, then line 2 (perpendicular) has slope m₂ = -run/rise (swapping rise and run, and changing sign).

The product of perpendicular slopes: m₁ × m₂ = (rise/run) × (-run/rise) = -1.

Question: What's the difference between rate of change and slope?

Answer: In mathematics, slope and rate of change are essentially the same concept:

  • Slope: The mathematical term for the steepness of a line
  • Rate of change: The same value interpreted in a real-world context

For example, if a line representing distance vs. time has slope 60, we might say the rate of change of distance with respect to time is 60 mph.

Slope is the mathematical concept; rate of change is the contextual interpretation.

Question: How do I find the equation of a line if I only have two points?

Answer: Follow these steps:

  1. Calculate the slope: m = (y₂ - y₁)/(x₂ - x₁) using the two given points
  2. Use point-slope form: y - y₁ = m(x - x₁) with one of the points
  3. Simplify: Rearrange to slope-intercept form if needed

Example: Points (2, 3) and (4, 7)

  • m = (7 - 3)/(4 - 2) = 4/2 = 2
  • Using (2, 3): y - 3 = 2(x - 2)
  • y = 2x - 4 + 3 = 2x - 1

Question: Can a line have more than one y-intercept?

Answer: No, a line can have at most one y-intercept. The y-intercept occurs where x = 0, and for any function (including linear functions), each input value (x) can only correspond to one output value (y).

A vertical line (which is not a function) of the form x = a has no y-intercept if a ≠ 0, and infinitely many y-intercepts if a = 0 (which would be the y-axis itself).

For non-vertical lines, there is exactly one y-intercept at (0, b) where b is the y-intercept value.