a) What was the population in 2020?
b) When will the population reach 75,000?
Exponential growth model: \(P(t) = P_0e^{rt}\) where \(P_0\) is initial amount, \(r\) is growth rate, and \(t\) is time.
Continuous growth: Uses the natural base \(e\) for continuous compounding or growth.
- Identify the model: \(P(t) = P_0e^{rt}\)
- For initial value, set \(t = 0\)
- For time calculations, solve for \(t\) using logarithms
- Divide both sides by \(P_0\), then take natural logarithm
- Solve for the unknown variable
In 2020, \(t = 0\) (since \(t\) is years since 2020)
\(P(0) = 50000e^{0.03(0)} = 50000e^0 = 50000(1) = 50000\)
The population in 2020 was 50,000.
Set \(P(t) = 75000\):
\(75000 = 50000e^{0.03t}\)
\(\frac{75000}{50000} = e^{0.03t}\)
\(1.5 = e^{0.03t}\)
\(\ln(1.5) = \ln(e^{0.03t})\)
\(\ln(1.5) = 0.03t\)
\(t = \frac{\ln(1.5)}{0.03}\)
\(t = \frac{0.4055}{0.03} \approx 13.52\)
b) Population reaches 75,000 in about 13.5 years (around 2033.5)
a) The population in 2020 was 50,000 people.
b) The population will reach 75,000 in approximately 13.5 years, around mid-2033.
• Exponential growth model: \(P(t) = P_0e^{rt}\)
• Inverse property: \(\ln(e^x) = x\)
• Division property: Divide by coefficient before taking logarithm
Use the formula \(A(t) = A_0 \cdot \left(\frac{1}{2}\right)^{t/T}\), where \(T\) is the half-life.
Radioactive decay model: \(A(t) = A_0 \cdot \left(\frac{1}{2}\right)^{t/T}\) where \(A_0\) is initial amount, \(t\) is time elapsed, and \(T\) is half-life.
Half-life: Time required for half of the substance to decay.
• Initial amount: \(A_0 = 100\) grams
• Half-life: \(T = 5730\) years
• Time elapsed: \(t = 10000\) years
\(A(10000) = 100 \cdot \left(\frac{1}{2}\right)^{10000/5730}\)
\(\frac{10000}{5730} \approx 1.745\)
\(A(10000) = 100 \cdot \left(\frac{1}{2}\right)^{1.745}\)
\(A(10000) = 100 \cdot (0.5)^{1.745}\)
\(A(10000) = 100 \cdot 0.298\)
\(A(10000) \approx 29.8\) grams
After 10,000 years, approximately 29.8 grams of carbon-14 will remain.
After 10,000 years, approximately 29.8 grams of carbon-14 will remain in the sample.
• Radioactive decay model: \(A(t) = A_0 \cdot \left(\frac{1}{2}\right)^{t/T}\)
• Exponent calculation: Divide time by half-life to get the exponent
• Decimal approximation: Use calculator for fractional exponents
a) Find the pH of a solution with \([H^+] = 1 \times 10^{-4}\) M.
b) If a solution has a pH of 8.5, find the hydrogen ion concentration.
pH scale: Measures acidity/basicity of a solution using \(pH = -\log[H^+]\).
Hydrogen ion concentration: Measured in moles per liter (Molarity).
Given: \([H^+] = 1 \times 10^{-4}\) M
Using \(pH = -\log[H^+]\):
\(pH = -\log(1 \times 10^{-4})\)
\(pH = -\log(10^{-4})\)
\(pH = -(-4) = 4\)
Given: \(pH = 8.5\)
Start with: \(pH = -\log[H^+]\)
Substitute: \(8.5 = -\log[H^+]\)
\(-8.5 = \log[H^+]\)
\([H^+] = 10^{-8.5}\)
\([H^+] = 10^{-8.5} = \frac{1}{10^{8.5}} \approx 3.16 \times 10^{-9}\) M
b) \([H^+] \approx 3.16 \times 10^{-9}\) M
a) The pH of a solution with \([H^+] = 1 \times 10^{-4}\) M is 4 (acidic).
b) A solution with pH 8.5 has a hydrogen ion concentration of approximately \(3.16 \times 10^{-9}\) M (basic).
• pH formula: \(pH = -\log[H^+]\)
• Inverse operation: \(pH = -\log[H^+] \Rightarrow [H^+] = 10^{-pH}\)
• Logarithm property: \(\log(10^n) = n\)
Exponential growth: Quantity increases by a fixed percentage over equal intervals
Exponential decay: Quantity decreases by a fixed percentage over equal intervals
Logarithmic scale: Scale where each unit represents a power of the base
- Identify the scenario: Determine which real-world application applies
- Select the appropriate formula: Match the situation to the correct mathematical model
- Extract given information: Identify known values and what to solve for
- Substitute values: Plug known values into the formula
- Solve algebraically: Use logarithmic properties to isolate the unknown
- Interpret results: Provide context-specific meaning to the answer
• Growth/Decay: \(A(t) = A_0e^{kt}\) where \(k > 0\) for growth, \(k < 0\) for decay
• Half-life: \(A(t) = A_0 \cdot \left(\frac{1}{2}\right)^{t/T}\) where \(T\) is half-life period
• pH scale: \(pH = -\log[H^+]\) with range typically 0-14
• Richter scale: \(R = \log\left(\frac{I}{I_0}\right)\) for earthquake magnitude
a) If an earthquake has an intensity 1000 times greater than the reference intensity, what is its Richter scale rating?
b) An earthquake registers 6.5 on the Richter scale. How many times more intense is it compared to the reference intensity?
Richter scale: Logarithmic scale measuring earthquake magnitude using \(R = \log\left(\frac{I}{I_0}\right)\).
Intensity ratio: Each whole number increase represents a tenfold increase in amplitude.
Given: \(I = 1000I_0\), so \(\frac{I}{I_0} = 1000\)
Using \(R = \log\left(\frac{I}{I_0}\right)\):
\(R = \log(1000)\)
\(R = \log(10^3) = 3\)
Given: \(R = 6.5\)
Start with: \(R = \log\left(\frac{I}{I_0}\right)\)
Substitute: \(6.5 = \log\left(\frac{I}{I_0}\right)\)
\(\frac{I}{I_0} = 10^{6.5}\)
\(10^{6.5} = 10^{6.5} = 10^{6.5} \approx 3,162,277.66\)
Or more precisely: \(10^{6.5} = 10^{6 + 0.5} = 10^6 \cdot 10^{0.5} = 1,000,000 \cdot \sqrt{10} \approx 3,162,278\)
The earthquake is about 3.16 million times more intense than the reference intensity.
b) Intensity ratio: about 3,162,278 times more intense
a) An earthquake with intensity 1000 times the reference intensity registers 3 on the Richter scale.
b) An earthquake registering 6.5 on the Richter scale is approximately 3.16 million times more intense than the reference intensity.
• Richter scale formula: \(R = \log\left(\frac{I}{I_0}\right)\)
• Inverse operation: \(R = \log\left(\frac{I}{I_0}\right) \Rightarrow \frac{I}{I_0} = 10^R\)
• Logarithm property: \(\log(10^n) = n\)
Use the formula \(A = Pe^{rt}\), where \(A\) is the final amount, \(P\) is principal, \(r\) is rate, and \(t\) is time.
Continuous compound interest: \(A = Pe^{rt}\) where interest is compounded infinitely often.
Principal: Initial amount invested or borrowed.
• Principal: \(P = \$1000\)
• Annual interest rate: \(r = 4\% = 0.04\)
• Final amount (tripled): \(A = 3 \times \$1000 = \$3000\)
\(3000 = 1000e^{0.04t}\)
\(\frac{3000}{1000} = e^{0.04t}\)
\(3 = e^{0.04t}\)
\(\ln(3) = \ln(e^{0.04t})\)
\(\ln(3) = 0.04t\)
\(t = \frac{\ln(3)}{0.04}\)
\(t = \frac{1.0986}{0.04} \approx 27.47\)
It will take approximately 27.5 years for the investment to triple.
It will take approximately 27.5 years for the investment to triple in value.
• Continuous compound interest: \(A = Pe^{rt}\)
• Inverse property: \(\ln(e^x) = x\)
• Division property: Divide by coefficient before taking logarithm
Exponential growth/decay: Phenomena where the rate of change is proportional to the current amount
Logarithmic scale: Scale that uses logarithms to represent large ranges of values
Half-life: Time required for a quantity to reduce to half its initial value
- Identify the scenario: Recognize whether it's growth, decay, or measurement scale
- Select appropriate model: Choose the correct formula for the situation
- Extract parameters: Identify all known values and the unknown
- Substitute and solve: Use algebraic and logarithmic techniques
- Check reasonableness: Verify the answer makes sense in context
- Provide context: Express the answer in real-world terms
• Exponential model: \(A(t) = A_0e^{kt}\) where \(k > 0\) (growth) or \(k < 0\) (decay)
• Half-life relationship: \(k = -\frac{\ln(2)}{T}\) where \(T\) is half-life
• Logarithmic conversion: If \(y = \log_b(x)\), then \(x = b^y\)
• Continuous compounding: \(A = Pe^{rt}\) for financial applications
• Measurement scales: pH, Richter, decibels all use logarithmic relationships
\(f_1(t) = 1000e^{0.05t}\) (investment growth)
\(f_2(t) = 100 \cdot (0.5)^{t/10}\) (radioactive decay)
\(f_3(pH) = -\log[H^+]\) (acidity scale)
\(f_4(I) = \log(I/I_0)\) (earthquake magnitude)
Analysis: The chart shows how logarithms model various real-world phenomena.
- Investment grows exponentially over time
- Radioactive material decays exponentially
- pH scale compresses hydrogen ion concentrations
- Richter scale compresses earthquake intensities