Solving Logarithmic Equations: Visual Guide & Practice

Master solving logarithmic equations: convert between logarithmic and exponential forms, apply properties, and check solutions through 3 detailed exercises with visual representations.

Solution: Exercises 1 to 3
1 Basic logarithmic equation
Exercise 1
Solve: \(\log_2(x) = 3\)
Definition:

Logarithmic equation: An equation containing logarithms with the variable in the argument

Solution method:
  1. Convert the logarithmic equation to exponential form
  2. Solve the resulting exponential equation
  3. Check that the solution is valid (positive argument)
Original Equation
\(\log_2(x) = 3\)
Convert to Exponential
\(x = 2^3\)
Solution
\(x = 8\)
Step 1: Convert to exponential form

\(\log_2(x) = 3\) means \(2^3 = x\)

Step 2: Calculate the power

\(2^3 = 8\)

Step 3: Check the solution

Substitute back: \(\log_2(8) = \log_2(2^3) = 3\) ✓

Domain check: \(x = 8 > 0\), so the argument is positive ✓

\(x = 8\)
Final answer:

The solution is \(x = 8\).

Applied rules:

• Definition of logarithm: \(\log_b(x) = y\) means \(b^y = x\)

• Domain requirement: The argument of a logarithm must be positive

• Verification: Always substitute the solution back into the original equation

2 Using logarithm properties
Exercise 2
Solve: \(\log_3(x) + \log_3(x-2) = 2\)
Definition:

Product rule: \(\log_b(M) + \log_b(N) = \log_b(MN)\) when bases are the same

Original Equation
\(\log_3(x) + \log_3(x-2) = 2\)
Combine Logs
\(\log_3(x(x-2)) = 2\)
Convert to Exponential
\(x(x-2) = 3^2\)
Solve Quadratic
\(x = 3\) (only valid solution)
Step 1: Apply the product rule

\(\log_3(x) + \log_3(x-2) = \log_3(x(x-2))\)

So: \(\log_3(x(x-2)) = 2\)

Step 2: Convert to exponential form

\(\log_3(x(x-2)) = 2\) means \(x(x-2) = 3^2 = 9\)

Step 3: Solve the quadratic equation

\(x(x-2) = 9\)

\(x^2 - 2x = 9\)

\(x^2 - 2x - 9 = 0\)

Using the quadratic formula: \(x = \frac{2 \pm \sqrt{4 + 36}}{2} = \frac{2 \pm \sqrt{40}}{2} = \frac{2 \pm 2\sqrt{10}}{2} = 1 \pm \sqrt{10}\)

Step 4: Check domain restrictions

For \(\log_3(x)\) to be defined: \(x > 0\)

For \(\log_3(x-2)\) to be defined: \(x - 2 > 0\), so \(x > 2\)

Therefore, \(x > 2\)

\(1 + \sqrt{10} \approx 1 + 3.16 = 4.16 > 2\) ✓

\(1 - \sqrt{10} \approx 1 - 3.16 = -2.16 < 2\) ✗ (not valid)

\(x = 1 + \sqrt{10}\)
Final answer:

The solution is \(x = 1 + \sqrt{10}\).

Applied rules:

• Product rule: \(\log_b(M) + \log_b(N) = \log_b(MN)\)

• Domain restrictions: Arguments of logarithms must be positive

• Verification: Check that solutions satisfy domain requirements

3 Multiple logarithms
Exercise 3
Solve: \(\log(x+1) - \log(x-1) = \log(2)\)
Definition:

Quotient rule: \(\log_b(M) - \log_b(N) = \log_b(\frac{M}{N})\) when bases are the same

Original Equation
\(\log(x+1) - \log(x-1) = \log(2)\)
Combine Logs
\(\log(\frac{x+1}{x-1}) = \log(2)\)
Remove Logs
\(\frac{x+1}{x-1} = 2\)
Solve for x
\(x = 3\)
Step 1: Apply the quotient rule

\(\log(x+1) - \log(x-1) = \log(\frac{x+1}{x-1})\)

So: \(\log(\frac{x+1}{x-1}) = \log(2)\)

Step 2: Use the equality property

If \(\log_b(A) = \log_b(B)\), then \(A = B\)

Therefore: \(\frac{x+1}{x-1} = 2\)

Step 3: Solve the rational equation

\(\frac{x+1}{x-1} = 2\)

Multiply both sides by \((x-1)\): \(x+1 = 2(x-1)\)

\(x+1 = 2x-2\)

\(x+1 = 2x-2\)

\(1+2 = 2x-x\)

\(3 = x\)

Step 4: Check domain restrictions

For \(\log(x+1)\) to be defined: \(x+1 > 0\), so \(x > -1\)

For \(\log(x-1)\) to be defined: \(x-1 > 0\), so \(x > 1\)

Since \(x = 3 > 1\), both conditions are satisfied ✓

Step 5: Verify the solution

\(\log(3+1) - \log(3-1) = \log(4) - \log(2) = \log(\frac{4}{2}) = \log(2)\) ✓

\(x = 3\)
Final answer:

The solution is \(x = 3\).

Applied rules:

• Quotient rule: \(\log_b(M) - \log_b(N) = \log_b(\frac{M}{N})\)

• Equality property: If \(\log_b(A) = \log_b(B)\), then \(A = B\)

• Domain restrictions: All logarithm arguments must be positive

Key Properties of Logarithmic Equations
\(\log_b(x) = y \Rightarrow x = b^y\)
Logarithm to Exponential
\(\log_b(x) = \log_b(y) \Rightarrow x = y\)
Equality Property
Key definitions:

Logarithmic equation: An equation containing logarithms with the variable in the argument

Domain restriction: The argument of a logarithm must be positive

Extraneous solution: A solution that emerges during solving but doesn't satisfy the original equation

Change of base formula: \(\log_b(x) = \frac{\log_a(x)}{\log_a(b)}\) for any valid base a

Problem-solving methodology:
  1. Identify the type: Single log, multiple logs, or complex expressions
  2. Apply properties: Use log properties to combine or separate terms
  3. Convert form: Transform to exponential or eliminate logarithms
  4. Solve: Use algebraic techniques to find solutions
  5. Check domain: Verify solutions satisfy domain restrictions
  6. Verify: Substitute solutions back into original equation
Tip 1: Always check domain restrictions after finding solutions.
Tip 2: When logs have the same base on both sides, you can equate the arguments.
Tip 3: Remember that \(\log_b(x) = y\) is equivalent to \(x = b^y\).
Tip 4: Watch out for extraneous solutions that arise from squaring or other operations.
Common errors: Forgetting domain restrictions, not checking solutions, misapplying properties.
Exam preparation: Practice with various forms, memorize properties, check all solutions.
Essential formulas:

• Conversion: \(\log_b(x) = y \Rightarrow x = b^y\)

• Equality: \(\log_b(A) = \log_b(B) \Rightarrow A = B\)

• Product rule: \(\log_b(M) + \log_b(N) = \log_b(MN)\)

• Quotient rule: \(\log_b(M) - \log_b(N) = \log_b(\frac{M}{N})\)

• Power rule: \(n\log_b(M) = \log_b(M^n)\)

Solving Logarithmic Equations Strategies
\(\log_b(f(x)) = c \Rightarrow f(x) = b^c\)
Single Log Form
Single Log
\(\log_b(f(x)) = c\)
\(f(x) = b^c\)
Same Bases
\(\log_b(f(x)) = \log_b(g(x))\)
\(f(x) = g(x)\)
Multiple Logs
\(\log_b(f(x)) + \log_b(g(x)) = c\)
\(\log_b(f(x)g(x)) = c\)
Logarithmic Equation Workflow
📊
Step 1: Identify Type
Determine if it's single log, same bases, or multiple logs
Step 2: Apply Properties
Use product, quotient, or power rules to simplify
Step 3: Eliminate Logs
Convert to exponential form or equate arguments
Step 4: Solve Algebraically
Use appropriate algebraic techniques
Step 5: Check Solutions
Verify domain and substitute back
Domain Restrictions
\(\log(x)\)
\(x > 0\)
\(\log(x+a)\)
\(x > -a\)
\(\log(f(x))\)
\(f(x) > 0\)
Common Solution Verification
Substitute solutions back into original equation and check domain restrictions
Remember: Always verify solutions satisfy domain requirements!
Complete Summary: Solving Logarithmic Equations
Definitions
  • Logarithmic equation: An equation containing logarithms with the variable in the argument
  • Domain restriction: The argument of any logarithm must be positive (greater than 0)
  • Extraneous solution: A solution that emerges during the solving process but doesn't satisfy the original equation
  • Equality property: If \(\log_b(A) = \log_b(B)\), then \(A = B\) (for the same base)
  • Conversion property: \(\log_b(x) = y\) is equivalent to \(x = b^y\)
  • Change of base formula: \(\log_b(x) = \frac{\log_a(x)}{\log_a(b)}\) for any valid base a
  • Natural logarithm: Logarithm with base e, denoted as \(\ln(x)\)
Core Rules and Laws
  • Conversion rule: \(\log_b(x) = y \Rightarrow x = b^y\)
  • Equality rule: \(\log_b(A) = \log_b(B) \Rightarrow A = B\)
  • Product rule: \(\log_b(M) + \log_b(N) = \log_b(MN)\)
  • Quotient rule: \(\log_b(M) - \log_b(N) = \log_b(\frac{M}{N})\)
  • Power rule: \(n\log_b(M) = \log_b(M^n)\)
  • Domain law: For \(\log_b(f(x))\) to be defined, \(f(x) > 0\)
  • Base restriction: For \(\log_b(x)\), \(b > 0\), \(b \neq 1\), and \(x > 0\)
Step-by-Step Methods and Procedures
  1. Solving single logarithm equations:
    • Isolate the logarithm on one side of the equation
    • Convert to exponential form using \(\log_b(x) = y \Rightarrow x = b^y\)
    • Solve the resulting equation
    • Check that the solution satisfies domain restrictions
    • Verify by substituting back into the original equation
  2. Solving equations with same base logarithms:
    • Use properties to get a single logarithm on each side
    • Apply the equality property: if \(\log_b(A) = \log_b(B)\), then \(A = B\)
    • Solve the resulting equation
    • Check domain restrictions for both original expressions
  3. Solving equations with multiple logarithms:
    • Use properties to combine logarithms (product, quotient, power rules)
    • Simplify to a single logarithm on one or both sides
    • Convert to exponential form or apply equality property
    • Solve the resulting equation
    • Check all domain restrictions
Examples (Simple to Advanced)
  • Simple conversion: \(\log_2(x) = 4 \Rightarrow x = 2^4 = 16\)
  • Linear argument: \(\log_3(2x + 1) = 2 \Rightarrow 2x + 1 = 3^2 = 9 \Rightarrow x = 4\)
  • Product rule application: \(\log(x) + \log(x-3) = 1 \Rightarrow \log(x(x-3)) = 1 \Rightarrow x(x-3) = 10^1\)
  • Quotient rule application: \(\log_2(x+1) - \log_2(x-1) = 3 \Rightarrow \log_2(\frac{x+1}{x-1}) = 3 \Rightarrow \frac{x+1}{x-1} = 2^3\)
  • Advanced with quadratics: \(\log(x^2 - 4) - \log(x-2) = 1 \Rightarrow \log(\frac{x^2-4}{x-2}) = 1 \Rightarrow \frac{(x+2)(x-2)}{x-2} = 10\)
  • Natural logarithm: \(\ln(x) + \ln(x-1) = \ln(6) \Rightarrow \ln(x(x-1)) = \ln(6) \Rightarrow x(x-1) = 6\)
Tips, Tricks, and Common Pitfalls
  • Tip 1: Always check domain restrictions after finding solutions - arguments must be positive
  • Tip 2: When logarithms have the same base on both sides, you can equate the arguments directly
  • Tip 3: Be careful with signs when using the quotient rule - the argument must remain positive
  • Common mistake 1: Forgetting to check domain restrictions, leading to extraneous solutions
  • Common mistake 2: Not applying logarithm properties correctly (e.g., \(\log(x+y) \neq \log(x) + \log(y)\))
  • Common mistake 3: Making arithmetic errors when converting between logarithmic and exponential forms
  • Trick: When solving equations with multiple logs, try to combine them first before converting to exponential form
Key Notes for Memorization
  • Remember: \(\log_b(x) = y\) is equivalent to \(x = b^y\)
  • Remember: If \(\log_b(A) = \log_b(B)\), then \(A = B\)
  • Remember: The argument of any logarithm must be positive
  • Remember: Always verify solutions by substituting back into the original equation
  • Remember: Check domain restrictions for each logarithmic expression in the original equation
  • Remember: Extraneous solutions can occur, so verification is critical

Questions & Answers

Question: Why do I need to check domain restrictions when solving logarithmic equations? Isn't it enough to just solve the equation?

Answer: Checking domain restrictions is crucial because logarithms are only defined for positive arguments. When you solve a logarithmic equation, you might perform operations (like squaring both sides or multiplying) that introduce solutions that don't satisfy the original domain requirements.

For example, consider \(\log(x) + \log(x-3) = 1\). After solving, you might get \(x = -1\) and \(x = 4\). While both solutions work mathematically in the converted equation, \(x = -1\) is not valid because it makes the arguments of the logarithms negative: \(\log(-1)\) and \(\log(-1-3) = \log(-4)\) are undefined.

These are called "extraneous solutions" - they emerge during the solving process but don't satisfy the original equation. Always verify that each solution makes all logarithm arguments positive!

Question: Can I always eliminate logarithms by converting to exponential form, or are there cases where I should use other methods?

Answer: You can't always directly convert to exponential form, especially when you have multiple logarithms with the same base on one side. Here are the scenarios:

  • Single logarithm: Convert directly: \(\log_b(f(x)) = c \Rightarrow f(x) = b^c\)
  • Same base on both sides: Use equality property: \(\log_b(f(x)) = \log_b(g(x)) \Rightarrow f(x) = g(x)\)
  • Multiple logarithms: First use properties to combine: \(\log_b(f(x)) + \log_b(g(x)) = \log_b(f(x)g(x))\), then convert

For example, in \(\log_2(x) + \log_2(x-1) = 3\), you first combine the logs using the product rule: \(\log_2(x(x-1)) = 3\), then convert to exponential form: \(x(x-1) = 2^3\). The key is to use properties strategically to get to a form where you can apply the conversion or equality property.

Question: What's the difference between common logarithms (log) and natural logarithms (ln) when solving equations?

Answer: The main difference is the base:

  • Common logarithm (log): Base 10, so \(\log(x) = \log_{10}(x)\)
  • Natural logarithm (ln): Base e (≈ 2.718), so \(\ln(x) = \log_e(x)\)

The solving process is identical - all logarithm properties apply regardless of the base. For example:

  • \(\log(x) = 2 \Rightarrow x = 10^2 = 100\)
  • \(\ln(x) = 2 \Rightarrow x = e^2\)

Natural logarithms are more common in calculus and advanced mathematics because of the special properties of the number e. Common logarithms are often used in applications like pH calculations and earthquake magnitudes. The choice of which to use often depends on the context of the problem.

Remember that all domain restrictions and properties apply equally to both types of logarithms!