Solved Exercises on Polynomial Division in Algebra 2

Master polynomial division: long division and synthetic division with detailed explanations.

Solution: Exercises 1 to 3
1 Long Division
Exercise 1
Divide (2x³ - 5x² + 3x - 7) ÷ (x - 2) using long division.
Definition:

Polynomial long division: An algorithm to divide one polynomial by another, similar to numerical long division.

Division algorithm: Dividend = Divisor × Quotient + Remainder

Long division method:
  1. Divide the leading term of dividend by the leading term of divisor
  2. Multiply the divisor by this result
  3. Subtract this product from the dividend
  4. Repeat with the new dividend until the degree of remainder is less than divisor
Dividend
2x³ - 5x² + 3x - 7
Divisor
x - 2
Result
2x² - x + 1, R = -5
Step 1: Set up the division

(2x³ - 5x² + 3x - 7) ÷ (x - 2)

Step 2: Divide leading terms

2x³ ÷ x = 2x²

Step 3: Multiply divisor by 2x²

2x²(x - 2) = 2x³ - 4x²

Step 4: Subtract

(2x³ - 5x² + 3x - 7) - (2x³ - 4x²) = -x² + 3x - 7

Step 5: Repeat - divide leading terms

-x² ÷ x = -x

Step 6: Multiply divisor by -x

-x(x - 2) = -x² + 2x

Step 7: Subtract

(-x² + 3x - 7) - (-x² + 2x) = x - 7

Step 8: Repeat - divide leading terms

x ÷ x = 1

Step 9: Multiply divisor by 1

1(x - 2) = x - 2

Step 10: Subtract

(x - 7) - (x - 2) = -5

Quotient: 2x² - x + 1
Remainder: -5
Final answer:

(2x³ - 5x² + 3x - 7) ÷ (x - 2) = 2x² - x + 1 with remainder -5

Or: (2x³ - 5x² + 3x - 7) = (x - 2)(2x² - x + 1) + (-5)

Applied rules:

• Division algorithm: Dividend = Divisor × Quotient + Remainder

• Always subtract: Subtract the product from the current dividend

• Continue until: Degree of remainder < degree of divisor

2 Synthetic Division
Exercise 2
Divide (x³ - 6x² + 11x - 6) ÷ (x - 3) using synthetic division.
Definition:

Synthetic division: A shortcut method for dividing polynomials by linear factors of the form (x - c).

Setup
3 | 1 -6 11 -6
Process
↓ 3 -9 6
Result
1 -3 2 0
Step 1: Set up synthetic division

For (x - 3), use c = 3. Write coefficients: 1 -6 11 -6

3 | 1 -6 11 -6 ↓

Step 2: Bring down first coefficient

Bring down 1

3 | 1 -6 11 -6 ↓ 1

Step 3: Multiply and add

Multiply 1 × 3 = 3, add to next coefficient: -6 + 3 = -3

3 | 1 -6 11 -6 ↓ 3 1 -3

Step 4: Continue the process

Multiply -3 × 3 = -9, add to next: 11 + (-9) = 2

3 | 1 -6 11 -6 ↓ 3 -9 1 -3 2

Step 5: Final step

Multiply 2 × 3 = 6, add to last: -6 + 6 = 0

3 | 1 -6 11 -6 ↓ 3 -9 6 1 -3 2 0

Step 6: Interpret results

Quotient: x² - 3x + 2 (coefficients 1, -3, 2)

Remainder: 0 (last number)

Quotient: x² - 3x + 2
Remainder: 0
Final answer:

(x³ - 6x² + 11x - 6) ÷ (x - 3) = x² - 3x + 2 with remainder 0

Since remainder is 0, (x - 3) is a factor of the polynomial.

Applied rules:

• Synthetic division: Only works for divisors of form (x - c)

• Multiply and add: Always multiply by c and add to next coefficient

• Factor theorem: If remainder is 0, (x - c) is a factor

3 Division with Remainder
Exercise 3
Divide (3x⁴ + 2x³ - 5x + 8) ÷ (x² + 1) using long division.
Definition:

Division with higher-degree divisor: When divisor degree is greater than 1, use long division with careful term alignment.

Dividend
3x⁴ + 2x³ + 0x² - 5x + 8
Divisor
x² + 1
Result
3x² + 2x - 3, R = -7x + 11
Step 1: Set up the division

(3x⁴ + 2x³ + 0x² - 5x + 8) ÷ (x² + 1)

Note: Include 0x² term to maintain place value alignment.

Step 2: Divide leading terms

3x⁴ ÷ x² = 3x²

Step 3: Multiply divisor by 3x²

3x²(x² + 1) = 3x⁴ + 3x²

Step 4: Subtract

(3x⁴ + 2x³ + 0x² - 5x + 8) - (3x⁴ + 3x²) = 2x³ - 3x² - 5x + 8

Step 5: Divide leading terms again

2x³ ÷ x² = 2x

Step 6: Multiply divisor by 2x

2x(x² + 1) = 2x³ + 2x

Step 7: Subtract

(2x³ - 3x² - 5x + 8) - (2x³ + 2x) = -3x² - 7x + 8

Step 8: Divide leading terms again

-3x² ÷ x² = -3

Step 9: Multiply divisor by -3

-3(x² + 1) = -3x² - 3

Step 10: Subtract

(-3x² - 7x + 8) - (-3x² - 3) = -7x + 11

Step 11: Check degree condition

Remainder (-7x + 11) has degree 1, which is less than divisor degree (2)

Quotient: 3x² + 2x - 3
Remainder: -7x + 11
Final answer:

(3x⁴ + 2x³ - 5x + 8) ÷ (x² + 1) = 3x² + 2x - 3 with remainder -7x + 11

Or: (3x⁴ + 2x³ - 5x + 8) = (x² + 1)(3x² + 2x - 3) + (-7x + 11)

Applied rules:

• Missing terms: Include 0x² to maintain alignment

• Degree condition: Division stops when remainder degree < divisor degree

• Division algorithm: Always verify: Dividend = Divisor × Quotient + Remainder

Polynomial Division Guide
\(\text{Dividend} = \text{Divisor} \times \text{Quotient} + \text{Remainder}\)
Division Algorithm
Long Division
\(\frac{\text{Dividend}}{\text{Divisor}} = \text{Quotient} + \frac{\text{Remainder}}{\text{Divisor}}\)
General method for polynomial division
Synthetic Division
\(\text{For } (x-c): \text{ coefficients} \rightarrow \text{quotient}\)
Shortcut for linear divisors
Factor Theorem
\(\text{If } P(c) = 0, \text{ then } (x-c) \text{ is a factor}\)
Connection to division
Key definitions:

Dividend: The polynomial being divided.

Divisor: The polynomial that divides the dividend.

Quotient: The result of the division (excluding remainder).

Remainder: What's left after division; degree is less than divisor.

Synthetic division: A shortcut method for dividing by linear factors (x - c).

Division methods:
  1. Long division: Works for any divisor, follows standard algorithm
  2. Synthetic division: Faster method for linear divisors (x - c)
  3. Verification: Always check: Dividend = Divisor × Quotient + Remainder
Tip 1: Always include 0 coefficients for missing terms in long division.
Tip 2: Synthetic division only works when divisor is linear (x - c).
Tip 3: If remainder is 0, the divisor is a factor of the dividend.
Tip 4: The degree of the quotient is the dividend degree minus divisor degree.
Remainder theorem: P(c) equals the remainder when P(x) is divided by (x - c).
Factor theorem: (x - c) is a factor of P(x) if and only if P(c) = 0.
Essential division rules:

• Division algorithm: Dividend = Divisor × Quotient + Remainder

• Degree relationship: deg(Quotient) = deg(Dividend) - deg(Divisor)

• Remainder degree: deg(Remainder) < deg(Divisor)

• Synthetic division: Only for linear divisors of form (x - c)

• Factor test: If remainder = 0, divisor is a factor

Solution: Exercises 4 to 5
4 Synthetic Division Application
Exercise 4
Use synthetic division to find P(2) if P(x) = x⁴ - 3x³ + 2x² - 5x + 7. Then determine if (x - 2) is a factor.
Definition:

Remainder theorem: When P(x) is divided by (x - c), the remainder is P(c).

Setup
2 | 1 -3 2 -5 7
Process
↓ 2 -2 0 -10
Result
1 -1 0 -5 -3
Step 1: Set up synthetic division

For (x - 2), use c = 2. Write coefficients: 1 -3 2 -5 7

2 | 1 -3 2 -5 7 ↓

Step 2: Bring down first coefficient

Bring down 1

2 | 1 -3 2 -5 7 ↓ 1

Step 3: Multiply and add

1 × 2 = 2, add to -3: -3 + 2 = -1

2 | 1 -3 2 -5 7 ↓ 2 1 -1

Step 4: Continue the process

-1 × 2 = -2, add to 2: 2 + (-2) = 0

2 | 1 -3 2 -5 7 ↓ 2 -2 1 -1 0

Step 5: Continue

0 × 2 = 0, add to -5: -5 + 0 = -5

2 | 1 -3 2 -5 7 ↓ 2 -2 0 1 -1 0 -5

Step 6: Final step

-5 × 2 = -10, add to 7: 7 + (-10) = -3

2 | 1 -3 2 -5 7 ↓ 2 -2 0 -10 1 -1 0 -5 -3

Step 7: Interpret results

According to the Remainder Theorem, P(2) = -3 (the last number)

Since remainder ≠ 0, (x - 2) is not a factor of P(x)

P(2) = -3
(x - 2) is not a factor
Final answer:

P(2) = -3, and since the remainder is not zero, (x - 2) is not a factor of P(x).

Applied rules:

• Remainder theorem: P(c) equals remainder when P(x) ÷ (x - c)

• Factor theorem: (x - c) is factor iff P(c) = 0

• Synthetic division: Efficient for linear divisors

5 Division Result Verification
Exercise 5
Divide (x³ - 8) ÷ (x - 2) using synthetic division, then verify the result using the difference of cubes formula.
Definition:

Difference of cubes: a³ - b³ = (a - b)(a² + ab + b²)

Synthetic
2 | 1 0 0 -8
Result
1 2 4 0
Verification
(x-2)(x²+2x+4)
Step 1: Set up synthetic division

For (x - 2), use c = 2. Write coefficients: 1 0 0 -8 (including 0x² and 0x terms)

2 | 1 0 0 -8 ↓

Step 2: Perform synthetic division

Bring down 1

1 × 2 = 2, add to 0: 0 + 2 = 2

2 × 2 = 4, add to 0: 0 + 4 = 4

4 × 2 = 8, add to -8: -8 + 8 = 0

2 | 1 0 0 -8 ↓ 2 4 8 1 2 4 0

Step 3: Interpret result

Quotient: x² + 2x + 4, Remainder: 0

So: (x³ - 8) ÷ (x - 2) = x² + 2x + 4

Step 4: Verify using difference of cubes

x³ - 8 = x³ - 2³ = (x - 2)(x² + 2x + 4)

This matches our division result!

Step 5: Verify by multiplication

(x - 2)(x² + 2x + 4) = x³ + 2x² + 4x - 2x² - 4x - 8 = x³ - 8 ✓

Quotient: x² + 2x + 4
Remainder: 0
Final answer:

(x³ - 8) ÷ (x - 2) = x² + 2x + 4 with remainder 0. The result matches the difference of cubes formula.

Applied rules:

• Difference of cubes: a³ - b³ = (a - b)(a² + ab + b²)

• Verification: Always check division results by multiplication

• Special products: Recognize patterns to verify results

Complete Polynomial Division Summary
\(\text{Dividend} = \text{Divisor} \times \text{Quotient} + \text{Remainder}\)
Fundamental Division Algorithm
Comprehensive definitions:

Polynomial division: The process of dividing one polynomial by another to obtain a quotient and possibly a remainder.

Long division: A systematic method that works for any polynomial divisor.

Synthetic division: A streamlined method for dividing by linear factors of the form (x - c).

Remainder theorem: When polynomial P(x) is divided by (x - c), the remainder is P(c).

Factor theorem: (x - c) is a factor of P(x) if and only if P(c) = 0.

Complete division procedure:
  1. Prepare polynomials: Arrange in descending order, include 0 coefficients for missing terms
  2. Choose method: Long division for any divisor, synthetic for linear divisors
  3. Execute algorithm: Follow the appropriate division steps
  4. Check degree: Ensure remainder degree < divisor degree
  5. Verify result: Check: Dividend = Divisor × Quotient + Remainder
Tip 1: Always write polynomials in descending order before dividing.
Tip 2: Include 0 coefficients for missing terms to maintain proper alignment.
Tip 3: Use synthetic division when possible - it's faster than long division.
Tip 4: The degree of the quotient is always dividend degree minus divisor degree.
Tip 5: Always verify your answer by multiplying divisor and quotient, then adding remainder.
Remainder theorem: P(c) is the remainder when P(x) is divided by (x - c).
Factor theorem: (x - c) is a factor of P(x) if and only if P(c) = 0.
Zero remainder: Indicates the divisor is a factor of the dividend.
Degree relationship: deg(quotient) = deg(dividend) - deg(divisor).
Complete division rules:

• Division algorithm: Dividend = Divisor × Quotient + Remainder

• Synthetic division: Only for divisors of the form (x - c)

• Remainder degree: Must be less than divisor degree

• Factor identification: Zero remainder indicates factor

• Verification: Always multiply back to check accuracy

• Special patterns: Recognize difference/sum of cubes, perfect squares

Division Process Visualization
Exercise 6: Division Examples
Compare different polynomial divisions:
P₁(x) = x² - 4, D₁(x) = x - 2 (synthetic possible)
P₂(x) = x³ - 8, D₂(x) = x - 2 (synthetic possible)
P₃(x) = x³ + 1, D₃(x) = x² - 1 (synthetic not possible)
P₄(x) = x⁴ - 1, D₄(x) = x - 1 (synthetic possible)

Analysis: The chart shows how different polynomial divisions behave.

  • P₁(x) ÷ D₁(x) = (x² - 4) ÷ (x - 2): Quotient = x + 2, Remainder = 0
  • P₂(x) ÷ D₂(x) = (x³ - 8) ÷ (x - 2): Quotient = x² + 2x + 4, Remainder = 0
  • P₃(x) ÷ D₃(x) = (x³ + 1) ÷ (x² - 1): Requires long division
  • P₄(x) ÷ D₄(x) = (x⁴ - 1) ÷ (x - 1): Can use synthetic division

Questions & Answers

Question: When should I use synthetic division versus long division?

Answer: The choice depends on the divisor:

  • Synthetic division: Use only when divisor is linear of the form (x - c) or (x + c)
  • Long division: Use for any polynomial divisor (linear, quadratic, cubic, etc.)
  • Advantage of synthetic: Faster, more compact, less room for error
  • Example: For (x³ - 2x² + 3x - 4) ÷ (x - 1), use synthetic division
  • Example: For (x³ - 2x² + 3x - 4) ÷ (x² - x + 1), use long division

Synthetic division is preferred when applicable because it's more efficient, but long division is the general method that works in all cases.

Question: What happens if I forget to include a 0 coefficient for a missing term in long division?

Answer: Omitting 0 coefficients for missing terms leads to misalignment and incorrect results:

  • Problem: Terms won't line up properly during subtraction steps
  • Result: Incorrect quotients and remainders
  • Example: In (x³ + 2x - 5) ÷ (x - 1), write as (x³ + 0x² + 2x - 5) to maintain place value
  • Benefit: Including 0 terms maintains proper alignment and prevents errors

Always rewrite polynomials with all terms included (using 0 coefficients for missing terms) before starting long division to ensure accurate alignment.

Question: How does polynomial division relate to factoring?

Answer: Polynomial division and factoring are closely connected:

  • Factor identification: If (x - c) divides P(x) with remainder 0, then (x - c) is a factor
  • Complete factoring: Once you know (x - c) is a factor, P(x) = (x - c) × Q(x)
  • Roots and factors: If P(c) = 0, then (x - c) is a factor of P(x)
  • Application: Use division to reduce polynomial degree after finding a root

For example, if we find that (x - 2) divides x³ - 8 with zero remainder, we know x³ - 8 = (x - 2)(x² + 2x + 4), giving us a complete factorization.

Question: Can the remainder in polynomial division be a polynomial?

Answer: Yes, the remainder can be a polynomial, but it must have a degree less than the divisor:

  • Condition: deg(Remainder) < deg(Divisor)
  • Example: (x³ + 2x² + 3x + 4) ÷ (x² + 1) has remainder (2x + 3)
  • Constant remainder: When divisor is linear, remainder is usually a constant
  • Zero remainder: When divisor is a factor of the dividend

In the division algorithm P(x) = D(x) × Q(x) + R(x), the remainder R(x) is either 0 or has degree less than the divisor D(x). This is a fundamental requirement of polynomial division.

Question: How do I verify my polynomial division results?

Answer: Always verify using the division algorithm:

  1. Multiplication check: Multiply divisor × quotient
  2. Add remainder: Add the remainder to the product
  3. Compare: Check if this equals the original dividend
  4. Alternative: Use substitution to check specific values

For example, if (x³ - 8) ÷ (x - 2) = x² + 2x + 4 with remainder 0, verify: (x - 2)(x² + 2x + 4) + 0 = x³ - 8. You can also check by substituting a value like x = 0: left side gives -8, right side gives -8 ✓