Solved Exercises on the Definition of a Function in Grade 10

Master the definition of a function: domain, range, function notation, and function identification through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Function Identification
Exercise 1
Determine whether the relation {(1, 2), (3, 4), (5, 6), (7, 8)} represents a function. Explain your reasoning.
Definitions:

Function: A relation where each element in the domain is paired with exactly one element in the range

Domain: The set of all input values (x-values)

Range: The set of all output values (y-values)

Solution method:
  1. List all x-values: Identify the domain elements
  2. Check for repetition: See if any x-value appears more than once
  3. Apply the function rule: Each x-value must map to exactly one y-value
  4. Make the determination: State whether it's a function or not
Domain
{1, 3, 5, 7}
Range
{2, 4, 6, 8}
Function?
Yes
Step 1: Identify the ordered pairs

The relation consists of: (1, 2), (3, 4), (5, 6), (7, 8)

Step 2: List the x-values (domain)

Domain = {1, 3, 5, 7}

Step 3: Check for repeated x-values

Each x-value (1, 3, 5, 7) appears exactly once

Step 4: Verify each x-value maps to exactly one y-value

1 → 2, 3 → 4, 5 → 6, 7 → 8

Each x-value has exactly one corresponding y-value

Step 5: Apply the definition of a function

Since every element in the domain is paired with exactly one element in the range, this relation is a function.

This relation IS a function
Final answer:

Yes, the relation {(1, 2), (3, 4), (5, 6), (7, 8)} is a function because each x-value in the domain is paired with exactly one y-value in the range.

Applied rules:

• Function definition: Each domain element maps to exactly one range element

• No repeated x-values: A function cannot have the same input with different outputs

• Vertical line test: Conceptually, no vertical line would intersect the graph at more than one point

TIP: A relation is NOT a function if any x-value appears more than once with different y-values.
2 Function Table Analysis
Exercise 2
Consider the table of values below. Does this table represent a function? Explain your reasoning.
x y
-2 4
0 1
1 3
1 5
3 7
Definition:

Function table: A tabular representation showing input-output relationships where each input has exactly one output

Domain
{-2, 0, 1, 3}
Range
{1, 3, 4, 5, 7}
Function?
No
Step 1: Examine the x-values in the table

Looking at the x-column: -2, 0, 1, 1, 3

Step 2: Identify any repeated x-values

The x-value 1 appears twice in the table

Step 3: Check the corresponding y-values for the repeated x-value

When x = 1, we have y = 3 and y = 5

Step 4: Apply the function definition

A function requires that each x-value maps to exactly one y-value

Since x = 1 maps to both y = 3 and y = 5, this violates the function definition

Step 5: Make the determination

Because one x-value (x = 1) is associated with two different y-values, this table does NOT represent a function.

This table does NOT represent a function
Final answer:

No, the table does not represent a function because the input value x = 1 is associated with two different output values (y = 3 and y = 5).

Applied rules:

• One-to-one mapping: Each domain element must map to exactly one range element

• Repeated inputs: If an x-value appears more than once, it must always correspond to the same y-value

• Violation indicator: Any x-value with multiple y-values makes it not a function

TIP: When checking tables, scan the x-values for duplicates. If you find any, check if they have the same y-value.
3 Function Notation
Exercise 3
Given the function f(x) = 2x² - 3x + 1, find f(-2), f(0), and f(3). Also, determine the domain and range of this function.
Definition:

Function notation: f(x) represents the output of function f when x is the input

Domain: All possible input values for which the function is defined

Range: All possible output values of the function

Function
f(x) = 2x² - 3x + 1
Values
f(-2)=15, f(0)=1, f(3)=10
Domain & Range
Domain: ℝ, Range: [y_min, ∞)
Step 1: Calculate f(-2)

f(-2) = 2(-2)² - 3(-2) + 1

f(-2) = 2(4) + 6 + 1

f(-2) = 8 + 6 + 1 = 15

Step 2: Calculate f(0)

f(0) = 2(0)² - 3(0) + 1

f(0) = 0 - 0 + 1 = 1

Step 3: Calculate f(3)

f(3) = 2(3)² - 3(3) + 1

f(3) = 2(9) - 9 + 1

f(3) = 18 - 9 + 1 = 10

Step 4: Determine the domain

Since f(x) = 2x² - 3x + 1 is a polynomial function, it is defined for all real numbers

Domain: (-∞, ∞) or ℝ

Step 5: Determine the range

This is a quadratic function with a positive leading coefficient (a = 2 > 0), so it opens upward

The vertex occurs at x = -b/(2a) = -(-3)/(2·2) = 3/4

f(3/4) = 2(3/4)² - 3(3/4) + 1 = 2(9/16) - 9/4 + 1 = 9/8 - 18/8 + 8/8 = -1/8

Since the parabola opens upward and the minimum value is -1/8, the range is [-1/8, ∞)

f(-2)=15, f(0)=1, f(3)=10, Domain: ℝ, Range: [-1/8, ∞)
Final answer:

f(-2) = 15, f(0) = 1, f(3) = 10. The domain is all real numbers (ℝ), and the range is [-1/8, ∞).

Applied rules:

• Function evaluation: Substitute the input value for x in the function rule

• Polynomial domain: Polynomial functions have domain ℝ

• Quadratic range: Determined by the vertex and direction of opening

TIP: For quadratic functions f(x) = ax² + bx + c, if a > 0, the range is [minimum value, ∞); if a < 0, the range is (-∞, maximum value].
Function Definition Fundamentals
\(f: X \rightarrow Y\)
Function Mapping
Function
\(y = f(x)\)
Input-output relationship
Domain
\(D_f = \{x | f(x) \in \mathbb{R}\}\)
Valid inputs
Range
\(R_f = \{f(x) | x \in D_f\}\)
Valid outputs
Key definitions:

Function: A special type of relation where each input (x-value) is associated with exactly one output (y-value). For every x in the domain, there is exactly one corresponding y in the range.

Relation: A set of ordered pairs (x, y) that describes how elements from one set are related to elements of another set.

Domain: The set of all possible input values for which the function is defined.

Range: The set of all possible output values that the function can produce.

Function notation: The symbol f(x) (read as "f of x") represents the output value of the function f for the input value x.

Function Identification Process:
  1. Examine the representation: Whether it's ordered pairs, a table, a graph, or an equation
  2. Identify the inputs: List all x-values or input elements
  3. Check uniqueness: Verify that each input corresponds to exactly one output
  4. Apply the definition: Confirm that no input has multiple outputs
  5. State the conclusion: Determine if it's a function or not
  6. Justify the answer: Explain using the function definition
Tip 1: Use the Vertical Line Test for graphs: if any vertical line intersects the graph at more than one point, it's not a function.
Tip 2: For ordered pairs, check that no x-value appears more than once with different y-values.
Tip 3: For equations, solve for y and see if each x-value gives exactly one y-value.
Tip 4: Remember that functions can be represented in multiple ways: ordered pairs, tables, graphs, equations, and mappings.
Common errors: Confusing domain and range, thinking all relations are functions, forgetting that functions must pass the vertical line test.
Exam preparation: Practice identifying functions from different representations, memorize the definition, work on function notation.
Essential Function Principles:

• Uniqueness: Each input maps to exactly one output

• Determinacy: Given the same input, the function always produces the same output

• Completeness: Every element in the domain must have a corresponding element in the range

• Well-defined: The function rule must produce a unique output for each valid input

• Consistency: The relationship between inputs and outputs remains constant

Function Representations:

Ordered pairs: {(x₁, y₁), (x₂, y₂), ...} where each x-value appears only once

Tables: Two-column format with distinct x-values and their corresponding y-values

Graphs: Visual representations that pass the vertical line test

Equations: Mathematical expressions that uniquely determine y from x

Mappings: Diagrams showing arrows from domain elements to range elements

Solution: Exercises 4 to 5
4 Mapping Diagrams
Exercise 4
Determine whether the following mapping diagram represents a function. Explain your reasoning.
Domain: {A, B, C, D}, Range: {1, 2, 3, 4}
A → 1, B → 2, C → 3, D → 2
Definition:

Mapping diagram: A visual representation showing how elements from the domain are connected to elements in the range using arrows

Domain
{A, B, C, D}
Range
{1, 2, 3, 4}
Function?
Yes
Step 1: List all domain elements

Domain = {A, B, C, D}

Step 2: Examine the mappings

A → 1 (A maps to 1)

B → 2 (B maps to 2)

C → 3 (C maps to 3)

D → 2 (D maps to 2)

Step 3: Check if any domain element maps to multiple range elements

Each domain element (A, B, C, D) maps to exactly one range element

Even though both B and D map to 2, this is allowed (multiple inputs can have the same output)

Step 4: Apply the function definition

For a relation to be a function, each element in the domain must map to exactly one element in the range

In this case, each domain element maps to exactly one range element

Step 5: Make the determination

Since every element in the domain is paired with exactly one element in the range, this mapping diagram represents a function.

This mapping diagram represents a function
Final answer:

Yes, the mapping diagram represents a function because each element in the domain {A, B, C, D} is mapped to exactly one element in the range {1, 2, 3, 4}.

Applied rules:

• Domain uniqueness: Each domain element maps to exactly one range element

• Range flexibility: Multiple domain elements can map to the same range element

• Function criterion: Focus on the domain elements, not the range elements

TIP: In mapping diagrams, check that each domain element has exactly one arrow going out from it. Multiple arrows pointing to the same range element are okay.
5 Function or Not?
Exercise 5
Consider the equation x² + y² = 25. Does this equation represent y as a function of x? Explain your reasoning using both algebraic and graphical methods.
Definition:

Implicit equation: An equation where y is not isolated on one side, such as x² + y² = 25

Explicit function: An equation where y is expressed directly in terms of x, such as y = f(x)

Equation
x² + y² = 25
Solve for y
y = ±√(25 - x²)
Function?
No
Step 1: Attempt to solve for y in terms of x

x² + y² = 25

y² = 25 - x²

y = ±√(25 - x²)

Step 2: Analyze the result

For a given value of x (where -5 ≤ x ≤ 5), we get two possible values for y:

y = √(25 - x²) and y = -√(25 - x²)

Step 3: Test with a specific value

Let x = 3:

y = ±√(25 - 9) = ±√16 = ±4

So when x = 3, y could be 4 or -4

Step 4: Apply the function definition

Since x = 3 maps to both y = 4 and y = -4, this violates the function definition

A function requires each x-value to correspond to exactly one y-value

Step 5: Graphical verification

The equation x² + y² = 25 represents a circle with center (0,0) and radius 5

Using the vertical line test, any vertical line between x = -5 and x = 5 will intersect the circle at two points

This confirms that the equation does not represent a function

x² + y² = 25 does NOT represent a function
Final answer:

No, the equation x² + y² = 25 does not represent y as a function of x because for many x-values, there are two corresponding y-values. The graph is a circle that fails the vertical line test.

Applied rules:

• Function requirement: Each input must have exactly one output

• Vertical line test: A graph represents a function if no vertical line intersects it more than once

• Algebraic verification: Solve for y and check if there are multiple solutions

TIP: Equations of circles, ellipses, and hyperbolas typically do not represent functions because they fail the vertical line test.
Detailed Summary: Definition of a Function
\(f: X \rightarrow Y \text{ is a function} \iff \forall x \in X, \exists ! y \in Y \text{ such that } f(x) = y\)
Formal Function Definition
Comprehensive Definitions:

Function: A special type of relation where each element in the domain is paired with exactly one element in the range. Formally, a function f from set X to set Y assigns to each element x in X exactly one element y in Y.

Domain: The set of all possible input values (x-values) for which the function is defined. It represents all the values that can be legally substituted into the function.

Range: The set of all possible output values (y-values) that the function can produce. It's the collection of all actual function values.

Co-domain: The set Y in the notation f: X → Y. It includes all possible output values, which may be larger than the range.

Function notation: The expression f(x) (read as "f of x") represents the output value of the function f when x is the input value. It's a convenient way to denote the relationship between input and output.

Function Analysis Strategies:
  1. Representation identification: Determine if you're working with ordered pairs, a table, a graph, an equation, or a mapping diagram
  2. Element examination: Carefully inspect each input and its corresponding output(s)
  3. Uniqueness verification: Confirm that each input maps to exactly one output
  4. Rule application: Use the appropriate method based on the representation type
  5. Verification: Double-check your conclusion using alternative methods when possible
  6. Justification: Provide clear reasoning based on the function definition
Tip 1: The range is always a subset of the co-domain, but they're not always equal.
Tip 2: Multiple domain elements can map to the same range element in a function.
Tip 3: The domain of a function depends on the function rule and any restrictions.
Tip 4: Functions can be one-to-one (each output corresponds to exactly one input) or many-to-one (multiple inputs can have the same output).
Tip 5: The independent variable is typically x (input), and the dependent variable is typically y (output).
Common misconceptions: Thinking all relations are functions, confusing domain and range, believing that different inputs must produce different outputs.
Memory aids: "One in, one out" for functions, "DIXROY" (Domain, Input, X-values, Range, Output, Y-values), "Functions pass the vertical line test".
Critical Function Characteristics:

• Uniqueness property: For every x in the domain, there exists exactly one y in the range such that f(x) = y

• Well-defined: The function rule must produce a unique output for each valid input

• Completeness: Every element in the domain must have a corresponding element in the range

• Consistency: The same input always produces the same output

• Deterministic: Given the same input, the function will always yield the same result

Function Classification:

One-to-one function: Each element in the range corresponds to exactly one element in the domain (injective)

Onto function: Every element in the co-domain is mapped to by at least one element in the domain (surjective)

Bijection: Both one-to-one and onto (bijective)

Many-to-one function: Multiple domain elements can map to the same range element

Function Verification Methods:

• Ordered pairs: Check that no x-value appears more than once with different y-values

• Tables: Scan x-column for duplicate values with different y-values

• Graphs: Apply the vertical line test - no vertical line should intersect the graph more than once

• Equations: Solve for y and verify that each x-value yields exactly one y-value

• Mapping diagrams: Ensure each domain element has exactly one arrow going out

Questions & Answers

Question: I'm confused about the difference between domain and range. Can you explain this more clearly?

Answer: Think of a function like a machine:

  • Domain: The set of all possible inputs you can put into the machine (x-values)
  • Range: The set of all possible outputs you can get out of the machine (y-values)

For example, with f(x) = x²:

  • Domain: All real numbers (you can square any real number)
  • Range: All non-negative real numbers [0, ∞) (the square of any real number is non-negative)

Remember: Domain = Inputs, Range = Outputs. You can also remember "DIXROY": Domain, Input, X-values, Range, Output, Y-values.

Question: Why is the vertical line test important for identifying functions?

Answer: The vertical line test is a visual way to check the function definition:

  • If a vertical line intersects the graph at more than one point, it means one x-value corresponds to multiple y-values
  • This violates the function definition that each input must have exactly one output
  • If every vertical line intersects the graph at most once, each x-value has at most one y-value

Essentially, the vertical line test checks if the graph represents a relation where each x maps to exactly one y, which is the core requirement for a function.

Question: Can a function have the same output for different inputs? Like f(2) = 5 and f(3) = 5?

Answer: Yes, absolutely! This is perfectly fine in functions. A function requires that each input maps to exactly one output, but multiple inputs can map to the same output.

For example, with f(x) = x², we have f(2) = 4 and f(-2) = 4. This is a valid function.

What's NOT allowed is one input mapping to multiple outputs. For instance, if we had a relation where x = 2 mapped to both y = 3 and y = 5, that would NOT be a function.

Remember: many-to-one is OK, but one-to-many is NOT OK.

Question: How do I find the domain of a function when it's given as an equation?

Answer: To find the domain of a function given by an equation, look for values that would make the function undefined:

  1. Rational functions: Exclude values that make the denominator zero
  2. Square roots: The expression under the radical must be non-negative
  3. Logarithms: The argument must be positive
  4. Even roots: The expression under must be non-negative

For polynomial functions like f(x) = x² + 3x - 2, the domain is all real numbers since polynomials are defined everywhere.

For example, f(x) = 1/(x-2) has domain all reals except x = 2.

Question: Are all equations functions? How can I tell?

Answer: No, not all equations represent functions. An equation represents y as a function of x if and only if each x-value corresponds to exactly one y-value.

To determine if an equation represents a function:

  • Algebraically: Try to solve for y. If you get more than one possible y-value for a given x-value, it's not a function
  • Graphically: Use the vertical line test. If any vertical line intersects the graph at more than one point, it's not a function

For example, y = x² is a function, but x² + y² = 1 (a circle) is not a function because solving for y gives y = ±√(1-x²), which has two y-values for most x-values.