Linear function: A function of the form f(x) = mx + b, where m and b are constants and m ≠ 0
Slope (m): The rate of change of the function, representing steepness of the line
Y-intercept (b): The point where the graph crosses the y-axis (when x = 0)
- Identify standard form: Recognize f(x) = mx + b form
- Extract coefficients: Identify m (slope) and b (y-intercept)
- Find x-intercept: Set f(x) = 0 and solve for x
- Determine domain and range: Analyze function behavior
Comparing f(x) = 2x - 5 with f(x) = mx + b:
m = 2 (slope)
b = -5 (y-intercept)
The x-intercept occurs when f(x) = 0
0 = 2x - 5
2x = 5
x = 5/2 = 2.5
X-intercept: (2.5, 0)
Linear functions are defined for all real numbers
Domain: (-∞, ∞)
Since the slope is positive (m = 2 > 0), the function increases without bound
As x → -∞, f(x) → -∞
As x → ∞, f(x) → ∞
Range: (-∞, ∞)
f(0) = 2(0) - 5 = -5 ✓ (y-intercept)
f(2.5) = 2(2.5) - 5 = 5 - 5 = 0 ✓ (x-intercept)
Slope: 2, Y-intercept: -5, X-intercept: 2.5. Domain: (-∞, ∞), Range: (-∞, ∞).
• Linear form: f(x) = mx + b where m is slope, b is y-intercept
• X-intercept: Set function equal to zero and solve
• Linear domain/range: All linear functions have domain and range ℝ
Quadratic function: A function of the form f(x) = ax² + bx + c, where a ≠ 0
Comparing g(x) = x² - 4x + 3 with f(x) = ax² + bx + c:
a = 1, b = -4, c = 3
The x-coordinate of the vertex is: x = -b/(2a) = -(-4)/(2·1) = 4/2 = 2
The y-coordinate is: g(2) = (2)² - 4(2) + 3 = 4 - 8 + 3 = -1
Vertex: (2, -1)
The axis of symmetry passes through the vertex
Axis of symmetry: x = 2
The y-intercept occurs when x = 0
g(0) = (0)² - 4(0) + 3 = 3
Y-intercept: (0, 3)
Set g(x) = 0: x² - 4x + 3 = 0
Factor: (x - 1)(x - 3) = 0
So x = 1 or x = 3
X-intercepts: (1, 0) and (3, 0)
Since a = 1 > 0, the parabola opens upward
Domain: All real numbers (-∞, ∞)
Since the parabola opens upward and the minimum value is -1, the range is [-1, ∞)
Vertex: (2, -1), Axis of symmetry: x = 2, X-intercepts: (1, 0) and (3, 0), Y-intercept: (0, 3). Domain: (-∞, ∞), Range: [-1, ∞).
• Vertex formula: x = -b/(2a) for f(x) = ax² + bx + c
• Opening direction: Upward if a > 0, downward if a < 0
• Range: For upward parabolas, [min_value, ∞); for downward, (-∞, max_value]
Polynomial function: A function of the form f(x) = aₙxⁿ + aₙ₋₁xⁿ⁻¹ + ... + a₁x + a₀, where coefficients are real numbers and n is a non-negative integer
The highest power of x is 3, so the degree is 3
The coefficient of x³ is 1, so the leading coefficient is 1
For odd-degree polynomials with positive leading coefficient:
As x → -∞, f(x) → -∞
As x → ∞, f(x) → ∞
We need to solve h(x) = 0: x³ - 2x² - 5x + 6 = 0
Possible rational zeros: ±1, ±2, ±3, ±6
Test x = 1: h(1) = 1 - 2 - 5 + 6 = 0 ✓
So (x - 1) is a factor
Divide h(x) by (x - 1): x³ - 2x² - 5x + 6 = (x - 1)(x² - x - 6)
x² - x - 6 = (x - 3)(x + 2)
h(x) = (x - 1)(x - 3)(x + 2)
Set each factor to zero: x - 1 = 0, x - 3 = 0, x + 2 = 0
Real zeros: x = 1, x = 3, x = -2
Degree: 3, Leading coefficient: 1. End behavior: as x → -∞, h(x) → -∞; as x → ∞, h(x) → ∞. Real zeros: x = -2, 1, 3.
• Degree: Highest power of x in the polynomial
• Leading coefficient: Coefficient of the highest power term
• End behavior: Determined by degree and leading coefficient
• Rational root theorem: Possible rational zeros are factors of constant term over factors of leading coefficient
Function: A relation between a set of inputs (domain) and a set of outputs (range) where each input is associated with exactly one output.
Domain: The set of all possible input values for which the function is defined.
Range: The set of all possible output values that the function can produce.
End behavior: The behavior of the function as x approaches positive or negative infinity.
Real zeros: The x-values where the function equals zero (x-intercepts).
- Identify the function type: Determine if it's linear, quadratic, polynomial, or rational
- Extract key parameters: Identify coefficients, degrees, etc.
- Analyze key features: Find intercepts, vertex, asymptotes, etc.
- Determine domain and range: Identify restrictions and possible values
- Describe end behavior: Analyze function behavior at extremes
- Sketch the graph: Visualize the function's behavior
• Linear functions: Constant rate of change, straight line graph
• Quadratic functions: Parabolic graph, one vertex, symmetric about axis of symmetry
• Polynomial functions: Smooth continuous curves, number of turns ≤ degree - 1
• Rational functions: May have vertical and horizontal asymptotes, discontinuities where denominator is zero
Linear: f(x) = mx + b (degree 1) - straight line
Quadratic: f(x) = ax² + bx + c (degree 2) - parabola
Polynomial: f(x) = aₙxⁿ + ... + a₁x + a₀ (any degree n) - smooth curves
Rational: f(x) = P(x)/Q(x) (ratio of polynomials) - may have asymptotes
Power function: f(x) = axⁿ (single term) - basic building blocks
Rational function: A function that can be expressed as the quotient of two polynomials, f(x) = P(x)/Q(x), where Q(x) ≠ 0
The numerator x² - 4 is a difference of squares
x² - 4 = (x - 2)(x + 2)
r(x) = (x² - 4)/(x - 2) = [(x - 2)(x + 2)]/(x - 2)
For x ≠ 2, we can cancel the common factor (x - 2)
r(x) = x + 2, where x ≠ 2
The original function is undefined when the denominator equals zero
x - 2 = 0, so x = 2
Domain: All real numbers except x = 2
Domain: (-∞, 2) ∪ (2, ∞)
Vertical asymptotes occur where the denominator is zero and the numerator is non-zero
Since the factor (x - 2) cancels out, there is no vertical asymptote
Instead, there is a hole at x = 2
After simplification, r(x) = x + 2 is a linear function
Linear functions do not have horizontal asymptotes
The simplified function is r(x) = x + 2 for x ≠ 2
When x ≠ 2, r(x) ≠ 2 + 2 = 4
So the function can take any real value except 4
Range: (-∞, 4) ∪ (4, ∞)
As x approaches 2, r(x) approaches 2 + 2 = 4
But r(2) is undefined in the original function
Simplified: r(x) = x + 2, x ≠ 2. Domain: (-∞, 2) ∪ (2, ∞). Range: (-∞, 4) ∪ (4, ∞). No vertical asymptotes (hole at x = 2).
• Factoring: Recognize special forms like difference of squares
• Simplification: Cancel common factors in numerator and denominator
• Domain: Exclude values that make denominator zero
• Holes vs asymptotes: Factors that cancel create holes; remaining factors create asymptotes
Power function: A function of the form f(x) = xⁿ where n is a real number
f(x) = x²: Domain is all real numbers (-∞, ∞)
g(x) = x³: Domain is all real numbers (-∞, ∞)
Both functions have the same domain
f(x) = x²: Since x² ≥ 0 for all real x, Range = [0, ∞)
g(x) = x³: As x goes from -∞ to ∞, x³ also goes from -∞ to ∞, Range = (-∞, ∞)
f(x) = x²: f(-x) = (-x)² = x² = f(x), so it's an even function (symmetric about y-axis)
g(x) = x³: g(-x) = (-x)³ = -x³ = -g(x), so it's an odd function (symmetric about origin)
f(x) = x²: As x → ±∞, f(x) → ∞ (both ends go up)
g(x) = x³: As x → ∞, g(x) → ∞; As x → -∞, g(x) → -∞ (ends go in opposite directions)
f(x) = x²: Rate of change increases as |x| increases, but is always positive for x > 0
g(x) = x³: Rate of change increases more rapidly than x², and can be negative
Both functions have only one real zero at x = 0
| Property | f(x) = x² | g(x) = x³ |
|---|---|---|
| Degree | 2 (even) | 3 (odd) |
| Domain | (-∞, ∞) | (-∞, ∞) |
| Range | [0, ∞) | (-∞, ∞) |
| Symmetry | Even (about y-axis) | Odd (about origin) |
| End Behavior | Both ends → ∞ | Left → -∞, Right → ∞ |
Both functions have domain (-∞, ∞). f(x) = x² has range [0, ∞) and is even (symmetric about y-axis). g(x) = x³ has range (-∞, ∞) and is odd (symmetric about origin). f(x) opens upward in both directions, while g(x) goes down on the left and up on the right.
• Even/odd functions: Even if f(-x) = f(x), odd if f(-x) = -f(x)
• Power function behavior: Even powers have same end behavior, odd powers have opposite end behavior
• Range determination: Consider the function's minimum/maximum values and behavior
Linear function: A polynomial function of degree 1 with the general form f(x) = mx + b, where m is the slope and b is the y-intercept. The graph is always a straight line.
Quadratic function: A polynomial function of degree 2 with the general form f(x) = ax² + bx + c, where a ≠ 0. The graph is a parabola that opens upward if a > 0 or downward if a < 0.
Polynomial function: A function of the form f(x) = aₙxⁿ + aₙ₋₁xⁿ⁻¹ + ... + a₁x + a₀, where the coefficients are real numbers and n is a non-negative integer. The degree is the highest power of x.
Rational function: A function that can be expressed as the ratio of two polynomial functions, f(x) = P(x)/Q(x), where Q(x) ≠ 0. These functions may have vertical and horizontal asymptotes.
Power function: A function of the form f(x) = axⁿ, where a and n are real numbers. These serve as building blocks for more complex polynomial functions.
- Classification: Identify the function type based on its algebraic form
- Parameter extraction: Determine key coefficients and constants
- Feature identification: Find intercepts, vertex, asymptotes, etc.
- Behavior analysis: Examine end behavior and rate of change
- Domain and range: Determine valid input and output values
- Graphical representation: Sketch the function based on its properties
• Degree and behavior: Higher degree polynomials can have more complex graphs with more turns
• Leading coefficient: Determines the end behavior of polynomial functions
• Root multiplicity: Affects how the graph behaves at x-intercepts (crosses vs. touches)
• Asymptotes: Rational functions may have vertical (denominator zeros), horizontal (degree comparison), or slant asymptotes
• Continuity: Polynomial functions are continuous everywhere; rational functions may have discontinuities
Linear (degree 1): Constant rate of change, straight line graph, domain and range both ℝ
Quadratic (degree 2): Parabolic graph, one extremum, domain ℝ, range depends on direction
Cubic (degree 3): S-shaped curve, possible inflection point, domain and range both ℝ
Quartic (degree 4): W-shaped or U-shaped, up to 3 extrema, domain ℝ, range depends on leading coefficient
Rational: Variable behavior depending on degrees of numerator and denominator
• Linear: Plot two points and draw line through them
• Quadratic: Find vertex, axis of symmetry, and intercepts; plot additional points as needed
• Polynomial: Identify zeros and their multiplicities, end behavior, and turning points
• Rational: Find intercepts, asymptotes, and holes; plot points in each region
• Verification: Always check that your graph reflects the function's algebraic properties