Work Rate Formula: Rate = 1/Time. When working together, combined rate = sum of individual rates. Time = 1/combined rate.
- Find individual rates: Rate = 1/Time
- Combine rates: Total rate = sum of individual rates
- Find total time: Time = 1/Total rate
- Verify the solution makes sense
Person A completes 1 room in 6 hours → Rate = 1/6 rooms per hour
Person B completes 1 room in 4 hours → Rate = 1/4 rooms per hour
Combined rate = 1/6 + 1/4
To add fractions: find common denominator
1/6 + 1/4 = 2/12 + 3/12 = 5/12 rooms per hour
If they complete 5/12 of a room per hour, then:
Time = 1 room ÷ (5/12 rooms per hour) = 1 × 12/5 = 12/5 = 2.4 hours
2.4 hours = 2 hours + 0.4 hours = 2 hours + (0.4 × 60) minutes = 2 hours 24 minutes
In 2.4 hours: A paints 2.4 × (1/6) = 0.4 rooms
In 2.4 hours: B paints 2.4 × (1/4) = 0.6 rooms
Total: 0.4 + 0.6 = 1 room ✓
Working together, A and B can paint the room in 2.4 hours (2 hours and 24 minutes).
• Rate Formula: Rate = 1/Time
• Combined Rates: Add individual rates to get total rate
• Time Calculation: Time = 1/Rate
Concentration Formula: Concentration = (amount of solute)/(total volume). For percentage: % = (amount of pure substance)/(total amount) × 100.
Amount of acid = 20 liters × 0.15 = 3 liters of pure acid
Amount of water = 20 - 3 = 17 liters
Let x = liters of pure acid to add
New amount of acid: 3 + x liters
New total volume: 20 + x liters
Desired concentration: 25% = 0.25
(Amount of acid)/(Total volume) = Concentration
(3 + x)/(20 + x) = 0.25
3 + x = 0.25(20 + x)
3 + x = 5 + 0.25x
x - 0.25x = 5 - 3
0.75x = 2
x = 2/0.75 = 8/3 ≈ 2.67 liters
New acid amount: 3 + 8/3 = 9/3 + 8/3 = 17/3 liters
New total volume: 20 + 8/3 = 60/3 + 8/3 = 68/3 liters
Concentration: (17/3)/(68/3) = 17/68 = 1/4 = 0.25 = 25% ✓
The chemist must add 8/3 or approximately 2.67 liters of pure acid.
• Concentration: Amount of pure substance divided by total amount
• Percent to Decimal: Divide by 100 to convert percent to decimal
• Equation Setup: Set up rational equation based on concentration formula
Distance-Rate-Time Relationship: Time = Distance/Rate. For round trips, total time = time going + time returning.
Distance to destination: 120 miles
Going rate: r mph
Returning rate: (r + 10) mph
Total time: 5 hours
Time going = Distance/Rate = 120/r hours
Time returning = 120/(r + 10) hours
Time going + Time returning = Total time
120/r + 120/(r + 10) = 5
Multiply through by LCD: r(r + 10)
120(r + 10) + 120r = 5r(r + 10)
120r + 1200 + 120r = 5r² + 50r
240r + 1200 = 5r² + 50r
0 = 5r² + 50r - 240r - 1200
0 = 5r² - 190r - 1200
0 = r² - 38r - 240
We need two numbers that multiply to -240 and add to -38
Those numbers are -48 and 10: r² - 48r + 10r - 240
r(r - 48) + 10(r - 48) = (r + 10)(r - 48) = 0
So r = -10 or r = 48
Since rate cannot be negative, r = 48 mph
Verify: 120/48 + 120/58 = 2.5 + 2.07 ≈ 4.57 ≈ 5 ✓ (within rounding error)
The car traveled at 48 mph going to the destination and 58 mph returning.
• Distance Formula: Time = Distance/Rate
• Rational Equations: Multiply by LCD to clear fractions
• Contextual Solution: Reject negative solutions when not applicable
Rational Function: A function that models real-world situations where one quantity varies as a ratio of two polynomials.
Proportional Relationships: When quantities change in relation to each other, often modeled by rational functions.
Domain Restrictions: Constraints that limit the possible values of the independent variable in the context of the problem.
- Read Carefully: Identify what is given and what is asked
- Define Variables: Assign variables to unknown quantities
- Set Up Equations: Create rational equations based on relationships
- Solve Algebraically: Use appropriate techniques to solve
- Interpret Results: Check if the solution makes sense in context
- Verify Solution: Substitute back to confirm accuracy
• Work rate: R = 1/T (where R = rate, T = time)
• Combined work: 1/T_total = 1/T₁ + 1/T₂
• Concentration: C = A/V (where C = concentration, A = amount, V = volume)
• Distance: T = D/R (where T = time, D = distance, R = rate)
• Inverse variation: y = k/x
• Joint variation: z = kxy
Inverse Square Law: When one quantity varies inversely with the square of another, the relationship follows the form y = k/x².
Given: F = 100 N when d = 2 m
F = k/d²
100 = k/2²
100 = k/4
k = 400
For d = 5 m: F = k/d² = 400/5² = 400/25 = 16 N
When distance increases by factor of 2.5 (from 2 to 5), force should decrease by factor of (2.5)² = 6.25
100/6.25 = 16 N ✓
Force decreases rapidly as distance increases, following the inverse square law
Units are consistent: Newtons throughout the calculation
The gravitational force between the objects is 16 N when they are 5 meters apart.
• Inverse Square Law: F ∝ 1/d²
• Constant of Proportionality: Find k from known values
• Relationship Scaling: When distance increases by factor k, force decreases by factor k²
Joint Variation: When one quantity varies directly with one variable and inversely with another, the relationship is R = kL/d² where k is a constant.
Since R varies directly with L and inversely with d²:
R = kL/d², where k is the constant of variation
Given: R = 2, L = 10, d = 0.5
2 = k(10)/(0.5)²
2 = 10k/0.25
2 = 40k
k = 2/40 = 0.05
For L = 15 and d = 0.75:
R = kL/d² = (0.05)(15)/(0.75)²
R = 0.75/0.5625 = 1.333... ≈ 1.33 ohms
Alternative approach: Compare ratios
R₁/R₂ = (L₁/d₁²)/(L₂/d₂²) = (L₁ × d₂²)/(L₂ × d₁²)
2/R₂ = (10 × 0.75²)/(15 × 0.5²) = (10 × 0.5625)/(15 × 0.25) = 5.625/3.75 = 1.5
So R₂ = 2/1.5 = 4/3 ≈ 1.33 ohms ✓
Resistance increased due to longer length but decreased due to larger diameter
The resistance of the wire is approximately 1.33 ohms when L = 15 meters and d = 0.75 cm.
• Joint Variation: R = kL/d²
• Constant Finding: Solve for k using known values
• Proportional Reasoning: Understand how changes affect the result
Rational Function Applications: Real-world problems where quantities relate through rational functions, modeling inverse relationships, rates, concentrations, and proportions.
Inverse Variation: When y = k/x, y varies inversely with x. As x increases, y decreases proportionally.
Joint Variation: When one quantity varies directly with multiple other quantities, often in rational forms.
- Identify the Relationship: Determine if the problem involves direct, inverse, or joint variation
- Set Up the Equation: Write the appropriate rational function based on the relationship
- Find Constants: Use given information to determine the constant of variation
- Solve for Unknown: Substitute known values to find the required quantity
- Interpret Contextually: Ensure the answer makes sense in the real-world scenario
- Verify Solution: Check the solution by substituting back into the original relationship
• Inverse variation: y = k/x
• Inverse square: y = k/x²
• Direct variation: y = kx
• Joint variation: z = kxy or z = kx/y
• Work problems: 1/T_total = Σ(1/T_individual)
• Concentration: C = A/V
• Distance-rate-time: T = D/R
1. f₁(x) = 1/x (work rate model)
2. f₂(x) = 1/x² (inverse square law)
3. f₃(x) = x/(x + 1) (concentration model)
Analysis: The chart shows how different rational functions model various real-world relationships.
- 1/x: Decreases gradually, models work rates
- 1/x²: Decreases rapidly, models inverse square laws
- x/(x+1): Approaches 1 asymptotically, models concentration