Solved Exercises on Definition of Rational Functions in Algebra 2

Master the definition of rational functions: identifying rational functions, determining domain restrictions, simplifying rational expressions, and analyzing function behavior through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Identifying Rational Functions
Exercise 1
Determine whether each of the following functions is a rational function:
a) \(f(x) = \frac{x^2 + 3x - 2}{x - 1}\)
b) \(g(x) = \sqrt{x} + 2\)
c) \(h(x) = \frac{5}{x^3 + 2x}\)
Definition:

Rational function: A function that can be expressed as the ratio of two polynomials: \(R(x) = \frac{P(x)}{Q(x)}\), where \(P(x)\) and \(Q(x)\) are polynomials and \(Q(x) \neq 0\).

Polynomial: An expression consisting of variables and coefficients with only positive integer exponents.

Identification method:
  1. Check if the function can be written as a fraction
  2. Verify the numerator is a polynomial
  3. Verify the denominator is a polynomial
  4. Confirm the denominator is not zero
Rational Function Form
\(R(x) = \frac{P(x)}{Q(x)}\)
Where
\(P(x), Q(x)\) are polynomials
And
\(Q(x) \neq 0\)
Part a: \(f(x) = \frac{x^2 + 3x - 2}{x - 1}\)

Numerator: \(P(x) = x^2 + 3x - 2\) → This is a polynomial (degree 2)

Denominator: \(Q(x) = x - 1\) → This is a polynomial (degree 1)

Since both numerator and denominator are polynomials and the denominator is not identically zero, this is a rational function.

Part b: \(g(x) = \sqrt{x} + 2\)

This can be written as \(g(x) = x^{1/2} + 2\).

The term \(x^{1/2}\) has a fractional exponent, so this is NOT a polynomial.

Since it cannot be expressed as the ratio of two polynomials, this is NOT a rational function.

Part c: \(h(x) = \frac{5}{x^3 + 2x}\)

Numerator: \(P(x) = 5\) → This is a polynomial (constant polynomial)

Denominator: \(Q(x) = x^3 + 2x\) → This is a polynomial (degree 3)

Since both numerator and denominator are polynomials and the denominator is not identically zero, this is a rational function.

a) YES, b) NO, c) YES
Final answer:

a) \(f(x) = \frac{x^2 + 3x - 2}{x - 1}\) is a rational function.

b) \(g(x) = \sqrt{x} + 2\) is NOT a rational function.

c) \(h(x) = \frac{5}{x^3 + 2x}\) is a rational function.

Applied rules:

• Definition: Rational function = polynomial/polynomial

• Polynomial requirement: Only positive integer exponents allowed

• Non-zero denominator: Denominator cannot be zero polynomial

2 Domain Restrictions
Exercise 2
Find the domain of the rational function:
\(f(x) = \frac{x + 2}{x^2 - 4}\)
Definition:

Domain of rational function: All real numbers except those that make the denominator equal to zero.

Restriction: Division by zero is undefined, so exclude values that make denominator zero.

Function
\(f(x) = \frac{x + 2}{x^2 - 4}\)
Denominator
\(x^2 - 4\)
Restrictions
\(x^2 - 4 \neq 0\)
Step 1: Set denominator equal to zero

To find domain restrictions, solve: \(x^2 - 4 = 0\)

Step 2: Factor the denominator

\(x^2 - 4 = (x + 2)(x - 2)\)

Step 3: Solve for x

\((x + 2)(x - 2) = 0\)

This means \(x + 2 = 0\) or \(x - 2 = 0\)

So \(x = -2\) or \(x = 2\)

Step 4: State the domain

The function is undefined when \(x = -2\) or \(x = 2\).

Therefore, the domain is all real numbers except \(x = -2\) and \(x = 2\).

Step 5: Express in interval notation

Domain: \((-\infty, -2) \cup (-2, 2) \cup (2, \infty)\)

Domain: All real numbers except x = -2 and x = 2
Final answer:

The domain of \(f(x) = \frac{x + 2}{x^2 - 4}\) is \((-\infty, -2) \cup (-2, 2) \cup (2, \infty)\).

Applied rules:

• Domain restriction: Denominator ≠ 0

• Factoring: Factor denominator to find zeros

• Interval notation: Express domain excluding restrictions

3 Simplifying Rational Expressions
Exercise 3
Simplify the rational expression:
\(\frac{x^2 - 9}{x^2 - 6x + 9}\)
Definition:

Simplified rational expression: A rational expression in lowest terms where the numerator and denominator share no common factors.

Factoring: Process of writing a polynomial as a product of polynomials.

Original Expression
\(\frac{x^2 - 9}{x^2 - 6x + 9}\)
Factor Numerator
\(\frac{(x+3)(x-3)}{x^2 - 6x + 9}\)
Factor Denominator
\(\frac{(x+3)(x-3)}{(x-3)^2}\)
Step 1: Factor the numerator

\(x^2 - 9 = (x + 3)(x - 3)\) (difference of squares)

Step 2: Factor the denominator

\(x^2 - 6x + 9 = (x - 3)^2\) (perfect square trinomial)

Step 3: Write factored form

\(\frac{x^2 - 9}{x^2 - 6x + 9} = \frac{(x + 3)(x - 3)}{(x - 3)^2}\)

Step 4: Cancel common factors

\(\frac{(x + 3)(x - 3)}{(x - 3)^2} = \frac{(x + 3)\cancel{(x - 3)}}{(x - 3)\cancel{(x - 3)}} = \frac{x + 3}{x - 3}\)

Step 5: Note domain restrictions

The original expression was undefined when \(x = 3\), so the simplified form has the same restriction.

Simplified form: \(\frac{x + 3}{x - 3}\), where \(x \neq 3\)

\(\frac{x^2 - 9}{x^2 - 6x + 9} = \frac{x + 3}{x - 3}\) for \(x \neq 3\)
Final answer:

\(\frac{x^2 - 9}{x^2 - 6x + 9} = \frac{x + 3}{x - 3}\), where \(x \neq 3\).

Applied rules:

• Factoring techniques: Difference of squares, perfect square trinomial

• Simplification: Cancel common factors

• Domain preservation: Keep original restrictions

Rational Functions: Definitions and Properties
\(R(x) = \frac{P(x)}{Q(x)}\)
Definition of Rational Function
Rational Function
\(R(x) = \frac{P(x)}{Q(x)}\)
P, Q are polynomials, Q ≠ 0
Domain Restriction
\(Q(x) \neq 0\)
Exclude values that make denominator zero
Simplification
Cancel common factors
Keep original domain restrictions
Key definitions:

Rational function: A function that is the ratio of two polynomials

Polynomial: Expression with variables having only non-negative integer exponents

Domain: Set of all possible input values for which the function is defined

Analysis methodology:
  1. Identify the function type: Check if it's a ratio of polynomials
  2. Find domain restrictions: Set denominator equal to zero and solve
  3. Factor numerator and denominator: Look for common factors
  4. Simplify: Cancel common factors while preserving restrictions
  5. Analyze behavior: Identify holes, vertical asymptotes, and horizontal behavior
Tip 1: Always check if the function can be written as polynomial/polynomial.
Tip 2: Factor completely before simplifying to identify all restrictions.
Tip 3: Remember that simplifying doesn't change the original domain restrictions.
Tip 4: Look for special factoring patterns: difference of squares, perfect squares, sum/diff of cubes.
Common errors: Forgetting domain restrictions, canceling terms that aren't factors, not factoring completely.
Key insight: Rational functions can have vertical asymptotes or holes depending on the multiplicity of zeros in the denominator.
Essential Rules:

• Definition: \(R(x) = \frac{P(x)}{Q(x)}\) where \(P(x)\) and \(Q(x)\) are polynomials

• Domain: All real numbers except where \(Q(x) = 0\)

• Simplification: Factor and cancel common factors

• Non-polynomial expressions: Cannot contain radicals, absolute values, or transcendental functions

Solution: Exercises 4 to 5
4 Undefined Values
Exercise 4
For the function \(f(x) = \frac{x^3 - 8}{x^2 - 5x + 6}\), find all values of x for which the function is undefined.
Definition:

Undefined values: Values of x that make the denominator equal to zero, causing division by zero.

Domain exclusions: These values must be excluded from the domain of the rational function.

Function
\(f(x) = \frac{x^3 - 8}{x^2 - 5x + 6}\)
Denominator
\(x^2 - 5x + 6\)
Set Equal to Zero
\(x^2 - 5x + 6 = 0\)
Step 1: Identify the denominator

The denominator is \(x^2 - 5x + 6\)

Step 2: Set denominator equal to zero

To find undefined values, solve: \(x^2 - 5x + 6 = 0\)

Step 3: Factor the quadratic expression

We need two numbers that multiply to 6 and add to -5

Those numbers are -2 and -3

So: \(x^2 - 5x + 6 = (x - 2)(x - 3)\)

Step 4: Solve for x

\((x - 2)(x - 3) = 0\)

This means \(x - 2 = 0\) or \(x - 3 = 0\)

So \(x = 2\) or \(x = 3\)

Step 5: Verify by substitution

Check: When \(x = 2\): \(x^2 - 5x + 6 = 4 - 10 + 6 = 0\) ✓

Check: When \(x = 3\): \(x^2 - 5x + 6 = 9 - 15 + 6 = 0\) ✓

Function is undefined at x = 2 and x = 3
Final answer:

The function \(f(x) = \frac{x^3 - 8}{x^2 - 5x + 6}\) is undefined at \(x = 2\) and \(x = 3\).

Applied rules:

• Domain restriction: Denominator ≠ 0

• Factoring: Factor denominator to find zeros

• Zero product property: If AB = 0, then A = 0 or B = 0

5 Complex Rational Expression
Exercise 5
Determine if the following is a rational function and simplify if possible:
\(g(x) = \frac{x^4 - 1}{x^2 + 1}\)
Definition:

Higher-degree polynomials: Rational functions can have polynomials of any degree in numerator and denominator.

Complex factoring: May require advanced factoring techniques for higher-degree polynomials.

Function
\(g(x) = \frac{x^4 - 1}{x^2 + 1}\)
Factor Numerator
\(\frac{(x^2 + 1)(x^2 - 1)}{x^2 + 1}\)
Further Factor
\(\frac{(x^2 + 1)(x+1)(x-1)}{x^2 + 1}\)
Step 1: Check if it's a rational function

Numerator: \(P(x) = x^4 - 1\) → This is a polynomial (degree 4)

Denominator: \(Q(x) = x^2 + 1\) → This is a polynomial (degree 2)

Since both are polynomials and denominator is not zero (as \(x^2 + 1 > 0\) for all real x), this is a rational function.

Step 2: Factor the numerator

\(x^4 - 1\) is a difference of squares: \((x^2)^2 - 1^2 = (x^2 + 1)(x^2 - 1)\)

Step 3: Factor further if possible

\(x^2 - 1\) is also a difference of squares: \((x + 1)(x - 1)\)

So: \(x^4 - 1 = (x^2 + 1)(x + 1)(x - 1)\)

Step 4: Write the complete factorization

\(g(x) = \frac{(x^2 + 1)(x + 1)(x - 1)}{x^2 + 1}\)

Step 5: Cancel common factors

\(g(x) = \frac{\cancel{(x^2 + 1)}(x + 1)(x - 1)}{\cancel{x^2 + 1}} = (x + 1)(x - 1)\)

\(g(x) = x^2 - 1\)

Step 6: Note domain considerations

Since \(x^2 + 1\) is never zero for real numbers, there are no domain restrictions from the original function.

The simplified form \(g(x) = x^2 - 1\) is valid for all real numbers.

\(g(x) = \frac{x^4 - 1}{x^2 + 1} = x^2 - 1\) for all real x
Final answer:

Yes, \(g(x) = \frac{x^4 - 1}{x^2 + 1}\) is a rational function. It simplifies to \(g(x) = x^2 - 1\) for all real numbers.

Applied rules:

• Definition: Both numerator and denominator are polynomials

• Difference of squares: \(a^2 - b^2 = (a+b)(a-b)\)

• Simplification: Cancel common factors when possible

Complete Guide to Rational Functions
\(R(x) = \frac{a_nx^n + \ldots + a_1x + a_0}{b_mx^m + \ldots + b_1x + b_0}\)
General Form of Rational Function
Key definitions:

Rational function: A function that can be expressed as the ratio of two polynomials, where the denominator is not the zero polynomial.

Domain: The set of all real numbers except those that make the denominator equal to zero.

Simplification: The process of reducing a rational expression to lowest terms by canceling common factors.

Comprehensive analysis methodology:
  1. Identify function type: Confirm it's a ratio of polynomials
  2. Factor completely: Factor both numerator and denominator
  3. Find domain: Identify values that make denominator zero
  4. Simplify: Cancel common factors
  5. Analyze behavior: Identify vertical asymptotes, holes, horizontal/slant asymptotes
  6. Graph characteristics: Understand key features of the graph
Tip 1: Always factor completely before attempting to simplify rational expressions.
Tip 2: Check your work by substituting a value to verify simplification is correct.
Tip 3: Remember that simplifying doesn't change the original domain restrictions.
Tip 4: Be aware that some denominators never equal zero (like x² + 1), so no domain restrictions exist.
Important note: Rational functions can have holes (removable discontinuities) or vertical asymptotes depending on the multiplicity of zeros in the denominator.
Common mistake: Canceling terms instead of factors, forgetting domain restrictions, or not factoring completely before simplifying.
Critical Definition Rules:

• Definition: \(R(x) = \frac{P(x)}{Q(x)}\) where \(P(x)\) and \(Q(x)\) are polynomials and \(Q(x) \neq 0\)

• Domain: All real numbers except solutions to \(Q(x) = 0\)

• Simplification: Factor and cancel common polynomial factors

• Not rational: Functions with radicals, absolute values, or transcendental functions in numerator or denominator

• Polynomial requirement: Only positive integer exponents in polynomials

Visualization: Basic Rational Functions
Exercise 6: Simple Rational Functions
Consider the following basic rational functions:
\(f_1(x) = \frac{1}{x}\) (reciprocal function)
\(f_2(x) = \frac{1}{x^2}\) (reciprocal squared)
\(f_3(x) = \frac{x}{x^2 + 1}\) (bounded rational function)
\(f_4(x) = \frac{x^2 - 1}{x - 1}\) (function with removable discontinuity)

Analysis: The chart shows different behaviors of rational functions.

  • Reciprocal function has vertical asymptote at x=0
  • Reciprocal squared is always positive
  • Bounded function approaches zero as x approaches ±∞
  • Function with removable discontinuity has a hole at x=1

Questions & Answers

Question: I thought √x was a polynomial, so wouldn't f(x) = √x/1 be a rational function since it's polynomial/polynomial?

Answer: Actually, √x is NOT a polynomial! A polynomial requires that all exponents be non-negative integers.

√x can be written as x^(1/2), which has a fractional exponent. Since 1/2 is not an integer, √x is not a polynomial.

For an expression to be a polynomial, it must be of the form:

\(a_nx^n + a_{n-1}x^{n-1} + \ldots + a_1x + a_0\)

where all exponents (n, n-1, ..., 1, 0) are non-negative integers.

So f(x) = √x/1 is not a rational function because the numerator is not a polynomial. The function f(x) = √x is called an algebraic function, but not a rational function.

Question: Why do we need to keep the original domain restrictions even after simplifying a rational function?

Answer: This is a very important concept! When we simplify a rational function by canceling common factors, we're creating an equivalent expression, but the original function's domain remains unchanged.

For example, consider: \(f(x) = \frac{x^2 - 1}{x - 1}\)

After factoring: \(f(x) = \frac{(x+1)(x-1)}{x-1}\)

After canceling: \(f(x) = x + 1\)

However, the original function was undefined at x = 1 (since that made the denominator zero). Even though we simplified it to x + 1, the function still has a hole at x = 1.

The simplified form x + 1 equals f(x) everywhere except at x = 1, where f(x) is undefined. So the domains are different: x + 1 is defined for all real numbers, but f(x) is defined for all real numbers except x = 1.

Question: What happens when the denominator is a polynomial like x² + 1 that never equals zero?

Answer: When the denominator is a polynomial that never equals zero for real numbers, the rational function is defined for all real numbers!

For example, with x² + 1:

Since x² ≥ 0 for all real x, we have x² + 1 ≥ 1 > 0 for all real x.

This means x² + 1 is never zero, so there are no domain restrictions.

Functions like f(x) = (3x + 2)/(x² + 1) or g(x) = (x³ - 1)/(x² + 1) are defined for all real numbers.

This is less common than denominators with real zeros, but it does occur. The graph of such functions will have no vertical asymptotes or holes caused by the denominator.

However, there could still be other domain restrictions if the numerator has restrictions (though polynomials don't).

Question: How do I factor higher-degree polynomials like x⁴ - 1 in rational functions?

Answer: For higher-degree polynomials, look for special factoring patterns:

1. Difference of squares: a² - b² = (a+b)(a-b)

Example: x⁴ - 1 = (x²)² - 1² = (x² + 1)(x² - 1)

2. Difference of cubes: a³ - b³ = (a-b)(a² + ab + b²)

Example: x³ - 8 = x³ - 2³ = (x-2)(x² + 2x + 4)

3. Sum of cubes: a³ + b³ = (a+b)(a² - ab + b²)

Example: x³ + 27 = x³ + 3³ = (x+3)(x² - 3x + 9)

4. Perfect square trinomials: a² ± 2ab + b² = (a ± b)²

Example: x² - 6x + 9 = (x-3)²

5. Grouping method: For four terms, group in pairs and factor out common factors

For x⁴ - 1 specifically: x⁴ - 1 = (x²)² - 1² = (x² + 1)(x² - 1) = (x² + 1)(x+1)(x-1)

Always check if factored parts can be factored further!

Question: Can rational functions have more than one vertical asymptote?

Answer: Yes, absolutely! A rational function can have multiple vertical asymptotes.

Vertical asymptotes occur at the values of x that make the denominator zero (provided they don't also make the numerator zero).

For example: f(x) = 1/[(x-1)(x+2)(x-3)] has vertical asymptotes at x = 1, x = -2, and x = 3.

Another example: g(x) = (x+5)/[x(x-4)(x+1)²] has vertical asymptotes at x = 0, x = 4, and x = -1.

The number of vertical asymptotes depends on the number of distinct zeros in the denominator (after simplification). If a factor appears multiple times in the denominator, it still creates only one vertical asymptote at that x-value.

Note: If a factor cancels out (appears in both numerator and denominator), it creates a hole instead of a vertical asymptote.