Solved Exercises on Related Rates Introduction in Calculus 1

Master related rates: connecting rates of change, geometric applications, and physical problems through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Expanding Circle
Exercise 1
A circular oil spill is expanding. If the radius is increasing at a rate of 2 ft/min, how fast is the area increasing when the radius is 10 feet?
Definition:

Related Rates: Problems that involve finding the rate of change of one quantity when the rate of change of another related quantity is known. We use implicit differentiation to connect the rates.

Method:
  1. Identify the given and unknown rates
  2. Write an equation relating the variables
  3. Differentiate both sides with respect to time
  4. Substitute known values and solve for the unknown rate
Given
dr/dt = 2, r = 10
Area Formula
A = πr²
dA/dt
40π ft²/min
Step 1: Identify the given and unknown information

Given: dr/dt = 2 ft/min, r = 10 ft

Unknown: dA/dt when r = 10 ft

Step 2: Write the equation relating the variables

A = πr² (area of circle)

Step 3: Differentiate both sides with respect to time

dA/dt = d/dt(πr²) = π(2r)(dr/dt) = 2πr(dr/dt)

Step 4: Substitute the known values

dA/dt = 2π(10)(2) = 40π ft²/min

Step 5: Interpret the result

The area is increasing at a rate of 40π ≈ 125.66 ft²/min

dA/dt = 40π ft²/min ≈ 125.66 ft²/min
Final answer:

The area of the oil spill is increasing at a rate of 40π ft²/min (approximately 125.66 ft²/min) when the radius is 10 feet.

Applied rules:

• Chain rule: d/dt[r²] = 2r(dr/dt)

• Implicit differentiation: Differentiate both sides of the equation with respect to time

• Geometric relationship: Area of circle is A = πr²

Key notes:

• Always differentiate with respect to time in related rates problems

• The chain rule is essential when differentiating composite functions

• The rate of change of area depends on both the current radius and the rate of radius change

2 Sliding Ladder
Exercise 2
A 13-foot ladder is leaning against a wall. If the bottom of the ladder slides away from the wall at 2 ft/sec, how fast is the top of the ladder sliding down the wall when the bottom is 5 feet from the wall?
Definition:

Pythagorean relationship: For a ladder of length L, x² + y² = L², where x is the horizontal distance from the wall and y is the vertical height on the wall.

Given
dx/dt = 2, L = 13, x = 5
Find y
y = 12
dy/dt
-5/6 ft/sec
Step 1: Set up the geometric relationship

x² + y² = 13² = 169 (Pythagorean theorem)

Step 2: Find y when x = 5

5² + y² = 169

25 + y² = 169

y² = 144, so y = 12 ft

Step 3: Differentiate the equation with respect to time

d/dt[x² + y²] = d/dt[169]

2x(dx/dt) + 2y(dy/dt) = 0

Step 4: Solve for dy/dt

2x(dx/dt) + 2y(dy/dt) = 0

2y(dy/dt) = -2x(dx/dt)

dy/dt = -x(dx/dt)/y

Step 5: Substitute known values

dy/dt = -(5)(2)/12 = -10/12 = -5/6 ft/sec

dy/dt = -5/6 ft/sec ≈ -0.833 ft/sec
Final answer:

The top of the ladder is sliding down the wall at a rate of 5/6 ft/sec (approximately 0.833 ft/sec).

Applied rules:

• Pythagorean theorem: x² + y² = L² for ladder problems

• Implicit differentiation: d/dt[x²] = 2x(dx/dt), d/dt[y²] = 2y(dy/dt)

• Negative rate: Negative sign indicates downward direction

Key notes:

• The negative sign indicates the top of the ladder is moving downward

• As the base moves away from the wall, the top moves down the wall

• The rates are related through the geometric constraint of the ladder length

3 Conical Tank
Exercise 3
Water is poured into a conical tank at a rate of 5 ft³/min. The tank has a height of 12 ft and a base radius of 4 ft. How fast is the water level rising when the water is 6 ft deep?
Definition:

Volume of cone: V = (1/3)πr²h. For related rates, we must eliminate one variable using the geometric relationship between radius and height.

Given
dV/dt = 5, H = 12, R = 4
r-h relation
r = h/3
dh/dt
45/(36π) ft/min
Step 1: Establish the geometric relationship

By similar triangles: r/h = R/H = 4/12 = 1/3

Therefore: r = h/3

Step 2: Express volume in terms of one variable

V = (1/3)πr²h = (1/3)π(h/3)²h = (1/3)π(h²/9)h = πh³/27

Step 3: Differentiate with respect to time

dV/dt = d/dt[πh³/27] = π/27 × 3h² × dh/dt = πh²/9 × dh/dt

Step 4: Solve for dh/dt

dh/dt = (dV/dt) / (πh²/9) = 9(dV/dt) / (πh²)

Step 5: Substitute known values when h = 6

dh/dt = 9(5) / (π(6)²) = 45 / (36π) = 5/(4π) ft/min

dh/dt = 5/(4π) ft/min ≈ 0.398 ft/min
Final answer:

The water level is rising at a rate of 5/(4π) ft/min (approximately 0.398 ft/min) when the water is 6 feet deep.

Applied rules:

• Similar triangles: Used to eliminate one variable in geometric problems

• Chain rule: d/dt[h³] = 3h²(dh/dt)

• Volume substitution: Eliminate dependent variable before differentiation

Key notes:

• Similar triangles are crucial for eliminating variables in geometric problems

• The rate of change of water level depends on the current depth

• As the water gets deeper, the same volume adds less height (narrower at top)

Related Rates Rules and Methods
\( \frac{d}{dt}[f(x,y)] = \frac{\partial f}{\partial x} \cdot \frac{dx}{dt} + \frac{\partial f}{\partial y} \cdot \frac{dy}{dt} \)
Chain Rule for Functions of Several Variables
\( \frac{d}{dt}[x^n] = nx^{n-1} \cdot \frac{dx}{dt} \)
Chain Rule for Powers
\( \frac{d}{dt}[\sin(x)] = \cos(x) \cdot \frac{dx}{dt} \)
Chain Rule for Trigonometric Functions
Circle
A = πr²
dA/dt = 2πr(dr/dt)
Sphere
V = (4/3)πr³
dV/dt = 4πr²(dr/dt)
Pythagorean
x² + y² = c²
2x(dx/dt) + 2y(dy/dt) = 0
Key definitions:

Related Rates: Problems where we know the rate of change of one variable and need to find the rate of change of another variable related to it through an equation.

Implicit Differentiation: Differentiating both sides of an equation with respect to time, treating variables as functions of time.

Chain Rule: The fundamental tool for related rates: d/dt[f(x)] = f'(x)(dx/dt).

Geometric Constraints: Relationships like Pythagorean theorem, area/volume formulas that connect variables.

Complete methodology:
  1. Read carefully: Identify all variables and their rates of change
  2. Sketch: Draw a diagram if applicable
  3. Label: Assign variables to changing quantities
  4. Find equation: Write an equation that relates the variables
  5. Differentiate: Differentiate both sides with respect to time
  6. Substitute: Plug in known values
  7. Solve: Find the unknown rate
  8. Interpret: Check if the answer makes sense in context
Tip 1: Always differentiate before substituting values to avoid errors.
Tip 2: Use similar triangles to eliminate variables in geometric problems.
Tip 3: The sign of the rate indicates direction of change (+ upward/rightward, - downward/leftward).
Tip 4: Units must be consistent throughout the problem.
Key insight: Related rates problems connect abstract calculus to real-world dynamic situations.
Practical application: Used in physics, engineering, economics, and science to model changing systems.
Key Properties:

• Chain rule: Essential for differentiating composite functions with respect to time

• Geometric relationships: Provide the constraint equations that connect variables

• Direction of change: Sign of the rate indicates whether the variable is increasing or decreasing

• Implicit differentiation: Treats variables as functions of time during differentiation

Solution: Exercises 4 to 5
4 Shadow Problem
Exercise 4
A 6-ft man walks away from a 15-ft tall streetlight at 4 ft/sec. How fast is the tip of his shadow moving when he is 10 ft from the base of the light?
Definition:

Similar triangles: The triangle formed by the light, the man, and the ground is similar to the triangle formed by the light, the tip of the shadow, and the ground.

Variables
x = distance from light, s = shadow length
Relation
s = (2/3)x
Tip rate
20/3 ft/sec
Step 1: Set up variables

Let x = distance from man to base of light, s = length of shadow

Total distance from base of light to tip of shadow = x + s

Step 2: Use similar triangles

Height of light / Distance to tip = Height of man / Length of shadow

15/(x + s) = 6/s

15s = 6(x + s) = 6x + 6s

9s = 6x

s = (2/3)x

Step 3: Find the distance from light to tip

Distance to tip = x + s = x + (2/3)x = (5/3)x

Step 4: Differentiate to find rate of tip movement

d/dt[distance to tip] = d/dt[(5/3)x] = (5/3)(dx/dt)

Step 5: Substitute known rate

dx/dt = 4 ft/sec (rate man walks away)

Rate of tip movement = (5/3)(4) = 20/3 ft/sec

Rate of tip = 20/3 ft/sec ≈ 6.67 ft/sec
Final answer:

The tip of the shadow is moving at a rate of 20/3 ft/sec (approximately 6.67 ft/sec).

Applied rules:

• Similar triangles: Set up proportion based on equal ratios of corresponding sides

• Chain rule: d/dt[kx] = k(dx/dt) for constants k

• Shadow geometry: The tip moves faster than the person due to the geometric relationship

Key notes:

• The tip of the shadow moves faster than the person walking

• The relationship between x and s comes from similar triangles

• The rate of the tip's movement is constant regardless of the person's position

5 Angular Rate
Exercise 5
A plane flying horizontally at an altitude of 2 miles passes directly over a radar station. When the plane is 3 miles from the station, it is moving away at 500 mph. How fast is the angle of elevation changing at that moment?
Definition:

Angle of elevation: The angle between the horizontal and the line of sight to the object. For a right triangle, tan(θ) = opposite/adjacent.

Given
altitude = 2, distance = 3, ds/dt = 500
Find
horizontal distance x = √5
dθ/dt
-1000/(3√5) rad/hr
Step 1: Set up the geometric relationship

Let θ = angle of elevation, x = horizontal distance from radar, h = altitude = 2 miles

tan(θ) = h/x = 2/x

Step 2: Find x when distance from station is 3 miles

Using Pythagorean theorem: x² + h² = 3²

x² + 4 = 9, so x² = 5, thus x = √5 miles

Step 3: Differentiate the tangent relationship

d/dt[tan(θ)] = d/dt[2/x]

sec²(θ)(dθ/dt) = 2(-1/x²)(dx/dt) = -2(dx/dt)/x²

Step 4: Find dx/dt using the distance relationship

Distance from station: s² = x² + h²

2s(ds/dt) = 2x(dx/dt)

dx/dt = s(ds/dt)/x = 3(500)/√5 = 1500/√5

Step 5: Find sec²(θ) and substitute

When x = √5, tan(θ) = 2/√5

sec²(θ) = 1 + tan²(θ) = 1 + 4/5 = 9/5

dθ/dt = [-2(dx/dt)/x²]/sec²(θ) = [-2(1500/√5)/5]/(9/5) = [-3000/(5√5)] × (5/9) = -1000/(3√5) rad/hr

dθ/dt = -1000/(3√5) rad/hr ≈ -149.1 rad/hr
Final answer:

The angle of elevation is decreasing at a rate of 1000/(3√5) radians per hour (approximately 149.1 rad/hr).

Applied rules:

• Trigonometric differentiation: d/dt[tan(θ)] = sec²(θ)(dθ/dt)

• Pythagorean identity: sec²(θ) = 1 + tan²(θ)

• Related distances: Connect horizontal and total distance rates

Key notes:

• The angle is decreasing as the plane moves away from the station

• Angular rates require trigonometric differentiation techniques

• Multiple geometric relationships may be needed to solve complex problems

Related Rates Introduction Summary

Comprehensive Summary: Related Rates Introduction

Key Definitions:

Related Rates: Problems where we know the rate of change of one quantity and need to find the rate of change of another quantity that is related to it through an equation.

Implicit Differentiation: The process of differentiating both sides of an equation with respect to time, treating variables as functions of time.

Chain Rule: The fundamental technique: d/dt[f(x)] = f'(x)(dx/dt), where x is a function of time.

Geometric Constraints: Equations like Pythagorean theorem, area/volume formulas, or similar triangles that relate variables in the problem.

Core Principles and Rules:
  1. Identify variables: Determine all quantities that change with time
  2. Find relationship: Write an equation connecting the variables
  3. Differentiate: Apply implicit differentiation with respect to time
  4. Substitute: Plug in known rates and values
  5. Solve: Find the unknown rate
  6. Interpret: Analyze the result in the context of the problem
Simple Example: Expanding Square

Problem: Side of square increases at 3 cm/s. Find rate of area change when side = 4 cm.

Equation: A = s²

Differentiate: dA/dt = 2s(ds/dt)

Substitute: dA/dt = 2(4)(3) = 24 cm²/s

Advanced Example: Moving Particle

Problem: Particle moves along y = x². When x = 2 and dx/dt = 3, find dy/dt.

Equation: y = x²

Differentiate: dy/dt = 2x(dx/dt)

Substitute: dy/dt = 2(2)(3) = 12 units/s

Tip 1: Always differentiate before substituting numerical values to avoid computational errors.
Tip 2: Draw diagrams to visualize the problem and identify geometric relationships.
Tip 3: Pay attention to signs - negative rates indicate decreasing quantities.
Tip 4: Use similar triangles to eliminate variables in geometric problems.
Common Pitfall: Forgetting to apply the chain rule when differentiating composite functions.
Common Mistake: Substituting values before differentiating, which eliminates the time dependency.
Key Takeaway: Related rates connect calculus concepts to real-world dynamic systems.
Essential Formulas:

• Chain rule: d/dt[f(x)] = f'(x)(dx/dt)

• Powers: d/dt[xⁿ] = nxⁿ⁻¹(dx/dt)

• Trigonometric: d/dt[sin(x)] = cos(x)(dx/dt)

• Product rule: d/dt[uv] = u(dv/dt) + v(du/dt)

Memory Techniques:

  • DRY: Differentiate, Relate, Yield
  • Chain Rule: Outside derivative × Inside rate
  • Time first: Always differentiate with respect to time
  • Substitute later: Differentiate before plugging numbers

Questions & Answers

Question: Why do we need to use implicit differentiation in related rates problems? Can't we just solve for one variable and differentiate?

Answer: Great question! The reason we use implicit differentiation is that in related rates problems, we're interested in how variables change with respect to time. Both variables are functions of time, so we differentiate the relationship between them with respect to time.

For example, if we have x² + y² = 25, and both x and y depend on time, then:

d/dt[x² + y²] = d/dt[25]

2x(dx/dt) + 2y(dy/dt) = 0

This gives us the relationship between dx/dt and dy/dt. Solving for one variable explicitly in terms of the other and then differentiating would lose the time-dependent relationship we're trying to find.

Implicit differentiation preserves the relationship between the rates of change.

Question: How do I know which geometric relationship to use in a related rates problem?

Answer: The geometric relationship depends on the shape and configuration described in the problem:

Right triangles: Use Pythagorean theorem: a² + b² = c²

Circles: Area A = πr², Circumference C = 2πr

Spheres: Volume V = (4/3)πr³, Surface area SA = 4πr²

Cylinders: Volume V = πr²h, Surface area SA = 2πrh + 2πr²

Cones: Volume V = (1/3)πr²h

Similar figures: Use proportional relationships (ratios of corresponding sides are equal)

Always sketch the situation and identify the relevant geometric properties. The relationship should connect the variables mentioned in the problem.

Question: What does a negative rate mean in related rates problems?

Answer: A negative rate indicates that the quantity is decreasing with respect to time. The sign convention typically depends on the coordinate system or direction definition:

In problems with vertical motion:

  • Positive rate: upward motion or increase in height
  • Negative rate: downward motion or decrease in height

In problems with horizontal motion:

  • Positive rate: rightward motion or increase in distance
  • Negative rate: leftward motion or decrease in distance

In area/volume problems:

  • Positive rate: expansion or increase in size
  • Negative rate: contraction or decrease in size

The magnitude of the rate indicates the speed of change, while the sign indicates the direction.

Question: How are related rates used in biological contexts?

Answer: Related rates are fundamental in biological modeling:

Population dynamics: How birth/death rates affect population size over time

Drug kinetics: How concentration changes as absorption and elimination rates vary

Enzyme kinetics: How reaction rates depend on substrate concentration

Diffusion: How concentration gradients drive molecular movement

Metabolism: How energy consumption rates change with activity levels

For example, if a spherical cell is growing, we can relate the rate of volume change to the rate of radius change using V = (4/3)πr³.

These applications connect mathematical concepts to real biological processes.

Question: Can related rates problems involve more than two variables?

Answer: Yes, related rates problems can involve multiple variables! When there are more than two variables, you'll need multiple relationships to connect them all.

For example, in a three-dimensional expanding cube where V = s³, A = 6s², and s is changing:

  • dV/dt = 3s²(ds/dt) connects volume rate to side rate
  • dA/dt = 12s(ds/dt) connects surface area rate to side rate
  • You could then relate dV/dt to dA/dt using both equations

In more complex problems, you might have multiple equations:

  • One equation relating variables A, B, and C
  • Another equation relating variables B, C, and D
  • Additional information about rates of some variables

The key is to have enough equations to solve for the unknown rate.