Solved Exercises on Non-Motion Applications of Integrals in Calculus 1

Master non-motion applications of integrals: area under curves, volumes of revolution, arc length, surface area, and economic applications through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Area Under Curve
Exercise 1
Find the area of the region bounded by the curve \(y = x^2\), the x-axis, and the lines \(x = 1\) and \(x = 3\).
Definition:

Area Under a Curve: The area between a curve \(y = f(x)\) and the x-axis from \(x = a\) to \(x = b\) is given by \(\int_a^b f(x) \, dx\), provided \(f(x) \geq 0\) on \([a, b]\).

Area calculation method:
  1. Verify that \(f(x) \geq 0\) on the interval \([a, b]\)
  2. Set up the integral: \(\text{Area} = \int_a^b f(x) \, dx\)
  3. Evaluate the definite integral
  4. Interpret the result as the area in square units
Function and Bounds
\(f(x) = x^2\), \([1, 3]\)
Area Integral
\(\int_1^3 x^2 \, dx\)
Result
\(\frac{26}{3}\)
Step 1: Verify the function is non-negative

Since \(f(x) = x^2 \geq 0\) for all real \(x\), the function is non-negative on \([1, 3]\).

Step 2: Set up the area integral

Area = \(\int_1^3 x^2 \, dx\)

Step 3: Evaluate the definite integral

\(\int_1^3 x^2 \, dx = \left[\frac{x^3}{3}\right]_1^3 = \frac{3^3}{3} - \frac{1^3}{3} = \frac{27}{3} - \frac{1}{3} = \frac{26}{3}\)

Step 4: State the final answer

The area is \(\frac{26}{3}\) square units.

\(\frac{26}{3}\) square units
Final answer:

The area of the region is \(\frac{26}{3}\) square units.

Applied rules:

• Area Formula: \(\text{Area} = \int_a^b f(x) \, dx\) when \(f(x) \geq 0\)

• Power Rule: \(\int x^n \, dx = \frac{x^{n+1}}{n+1} + C\)

• Fundamental Theorem: \(\int_a^b f(x) \, dx = F(b) - F(a)\)

Tip: Always verify that the function is non-negative over the interval to avoid signed areas.
Warning: If the function goes below the x-axis, you need to use absolute value or split the integral!
2 Volume of Revolution (Disk Method)
Exercise 2
Find the volume of the solid generated by revolving the region bounded by \(y = \sqrt{x}\), the x-axis, and \(x = 4\) about the x-axis.
Definition:

Volume by Disk Method: When a region is revolved around an axis, the volume of the resulting solid can be found using \(V = \pi \int_a^b [f(x)]^2 \, dx\) for rotation about the x-axis.

Function and Axis
\(y = \sqrt{x}\), revolved about x-axis
Disk Method
\(V = \pi \int_0^4 (\sqrt{x})^2 \, dx\)
Result
\(8\pi\)
Step 1: Identify the function and bounds

Function: \(y = \sqrt{x}\) on the interval \([0, 4]\) (from \(x = 0\) where \(\sqrt{x} = 0\) to \(x = 4\))

Step 2: Set up the disk method integral

When revolving around the x-axis, the radius of each disk is \(f(x) = \sqrt{x}\)

Volume = \(\pi \int_0^4 [f(x)]^2 \, dx = \pi \int_0^4 (\sqrt{x})^2 \, dx = \pi \int_0^4 x \, dx\)

Step 3: Evaluate the integral

\(\pi \int_0^4 x \, dx = \pi \left[\frac{x^2}{2}\right]_0^4 = \pi \left(\frac{16}{2} - \frac{0}{2}\right) = \pi \cdot 8 = 8\pi\)

Step 4: State the final answer

The volume is \(8\pi\) cubic units.

\(8\pi\) cubic units
Final answer:

The volume of the solid is \(8\pi\) cubic units.

Applied rules:

• Disk Method: \(V = \pi \int_a^b [f(x)]^2 \, dx\) for rotation about x-axis

• Radius Squared: The integrand is \([f(x)]^2\), not \(f(x)\)

• Integration: Apply power rule to evaluate the integral

Tip: The disk method works when the region touches the axis of rotation.
Warning: Don't forget the \(\pi\) factor and remember to square the function!
3 Arc Length
Exercise 3
Find the arc length of the curve \(y = x^{3/2}\) from \(x = 0\) to \(x = 4\).
Definition:

Arc Length: The length of a curve \(y = f(x)\) from \(x = a\) to \(x = b\) is given by \(L = \int_a^b \sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx\).

Function
\(y = x^{3/2}\)
Derivative
\(\frac{dy}{dx} = \frac{3}{2}x^{1/2}\)
Arc Length
\(L = \frac{8}{27}(10\sqrt{10} - 1)\)
Step 1: Find the derivative of the function

If \(y = x^{3/2}\), then \(\frac{dy}{dx} = \frac{3}{2}x^{1/2} = \frac{3}{2}\sqrt{x}\)

Step 2: Set up the arc length integral

Using the arc length formula: \(L = \int_a^b \sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx\)

\(L = \int_0^4 \sqrt{1 + \left(\frac{3}{2}\sqrt{x}\right)^2} \, dx = \int_0^4 \sqrt{1 + \frac{9x}{4}} \, dx\)

Step 3: Simplify the integrand

\(L = \int_0^4 \sqrt{\frac{4 + 9x}{4}} \, dx = \int_0^4 \frac{\sqrt{4 + 9x}}{2} \, dx = \frac{1}{2} \int_0^4 \sqrt{4 + 9x} \, dx\)

Step 4: Evaluate the integral using substitution

Let \(u = 4 + 9x\), then \(du = 9 \, dx\), so \(dx = \frac{1}{9} \, du\)

When \(x = 0\): \(u = 4 + 9(0) = 4\)

When \(x = 4\): \(u = 4 + 9(4) = 40\)

\(L = \frac{1}{2} \int_4^{40} \sqrt{u} \cdot \frac{1}{9} \, du = \frac{1}{18} \int_4^{40} u^{1/2} \, du\)

= \(\frac{1}{18} \left[\frac{u^{3/2}}{3/2}\right]_4^{40} = \frac{1}{18} \cdot \frac{2}{3} \left[u^{3/2}\right]_4^{40} = \frac{1}{27} \left[u^{3/2}\right]_4^{40}\)

Step 5: Calculate the definite integral

\(L = \frac{1}{27}[40^{3/2} - 4^{3/2}] = \frac{1}{27}[40\sqrt{40} - 8]\)

\(40\sqrt{40} = 40\sqrt{4 \cdot 10} = 40 \cdot 2\sqrt{10} = 80\sqrt{10}\)

So: \(L = \frac{1}{27}[80\sqrt{10} - 8] = \frac{8}{27}[10\sqrt{10} - 1]\)

\(L = \frac{8}{27}(10\sqrt{10} - 1)\)
Final answer:

The arc length is \(\frac{8}{27}(10\sqrt{10} - 1)\) units.

Applied rules:

• Arc Length Formula: \(L = \int_a^b \sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx\)

• Power Rule: \(\frac{d}{dx}[x^n] = nx^{n-1}\)

• Substitution Method: Let \(u = 4 + 9x\) to evaluate \(\int \sqrt{4 + 9x} \, dx\)

Tip: Always compute the derivative carefully as it's squared in the integrand.
Warning: Don't forget the +1 inside the square root!
Rules and methods, laws,...
\(A = \int_a^b f(x) \, dx\)
Area Formula
Area
\(A = \int_a^b f(x) \, dx\)
Under Curve
Volume
\(V = \pi \int_a^b [f(x)]^2 \, dx\)
Disk Method
Arc Length
\(L = \int_a^b \sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx\)
Curve Length
Key definitions:

Area Under Curve: The area between a function \(f(x)\) and the x-axis over an interval \([a, b]\), calculated as \(\int_a^b f(x) \, dx\) when \(f(x) \geq 0\).

Volume of Revolution: The volume generated when a region is rotated about an axis, computed using the disk method, washer method, or shell method.

Arc Length: The length of a curve, calculated using the integral of the square root of the sum of 1 and the square of the derivative.

Surface Area of Revolution: The surface area generated when a curve is rotated about an axis.

Application methodology:
  1. Identify the problem type: Determine if it's area, volume, arc length, or surface area
  2. Visualize the region: Sketch the region or curve to understand the setup
  3. Select the appropriate formula: Use the correct integral formula for the application
  4. Set up the integral: Determine bounds and integrand
  5. Evaluate the integral: Use appropriate integration techniques
  6. Interpret the result: Provide the answer with appropriate units
Tip 1: For area problems, always check if the function crosses the x-axis within the interval.
Tip 2: In volume problems, identify which method (disk, washer, shell) is most appropriate.
Tip 3: For arc length, the derivative computation is often the most challenging part.
Tip 4: Always verify that your answer has the correct units (area, volume, length).
Common errors: Forgetting to square the function in volume calculations, misidentifying the axis of rotation, incorrect derivative computation in arc length, not considering sign changes in area problems, improper bounds selection.
Key applications: Physics (work, fluid pressure), engineering (cross-sectional areas), economics (consumer surplus), biology (growth models), chemistry (reaction rates).
Complete reference formulas:

• Area: \(A = \int_a^b f(x) \, dx\) (when \(f(x) \geq 0\))

• Area Between Curves: \(A = \int_a^b |f(x) - g(x)| \, dx\)

• Volume (Disk): \(V = \pi \int_a^b [f(x)]^2 \, dx\) (rotation about x-axis)

• Volume (Washer): \(V = \pi \int_a^b ([f(x)]^2 - [g(x)]^2) \, dx\)

• Volume (Shell): \(V = 2\pi \int_a^b x \cdot f(x) \, dx\) (rotation about y-axis)

• Arc Length: \(L = \int_a^b \sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx\)

• Surface Area: \(S = 2\pi \int_a^b f(x)\sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx\)

Solution: Exercises 4 to 5
4 Work Application
Exercise 4
A cylindrical tank of radius 3 feet and height 10 feet is filled with water. Find the work required to pump all the water to the top of the tank. (Water density: 62.4 lb/ft³)
Definition:

Work Done by Integration: When the force varies with position, work is calculated as \(W = \int_a^b F(x) \, dx\), where \(F(x)\) is the force required at position \(x\).

Setup
Slice tank horizontally
Force Element
\(dF = 561.6\pi \, dx\)
Work Element
\(dW = 561.6\pi(10-x) \, dx\)
Step 1: Set up the coordinate system

Place the origin at the bottom of the tank, with the y-axis pointing upward. The tank extends from \(y = 0\) to \(y = 10\).

Step 2: Identify the volume element

Consider a thin horizontal slice of thickness \(dy\) at height \(y\). The slice has:

  • Radius: 3 feet
  • Area: \(\pi r^2 = \pi(3)^2 = 9\pi\) square feet
  • Volume: \(dV = 9\pi \, dy\) cubic feet
Step 3: Calculate the weight element

Weight of the slice: \(dF = \text{density} \times \text{volume} = 62.4 \times 9\pi \, dy = 561.6\pi \, dy\) pounds

Step 4: Determine the distance to lift

To pump the water from height \(y\) to the top (height 10), the distance is \(10 - y\) feet.

Step 5: Set up the work integral

Work to lift the slice: \(dW = \text{force} \times \text{distance} = 561.6\pi \, dy \times (10 - y)\)

Work to pump all water: \(W = \int_0^{10} 561.6\pi(10 - y) \, dy\)

Step 6: Evaluate the integral

\(W = 561.6\pi \int_0^{10} (10 - y) \, dy\)

= \(561.6\pi \left[10y - \frac{y^2}{2}\right]_0^{10}\)

= \(561.6\pi \left[(100 - 50) - (0 - 0)\right]\)

= \(561.6\pi \cdot 50 = 28080\pi\) foot-pounds

\(28080\pi\) foot-pounds
Final answer:

The work required is \(28080\pi \approx 88,200\) foot-pounds.

Applied rules:

• Work Formula: \(W = \int F(x) \, dx\) where \(F\) is the variable force

• Force Calculation: Weight = density × volume

• Distance Determination: Calculate how far each element must be moved

Tip: Always consider the distance each element must travel when setting up work integrals.
Warning: Don't forget to account for the density of the substance being moved!
5 Economic Application
Exercise 5
The marginal revenue function for a company is \(MR(q) = 100 - 2q\), where \(q\) is the quantity sold. Find the total revenue when 30 units are sold, assuming revenue is 0 when no units are sold.
Definition:

Marginal Revenue: The derivative of the revenue function, \(MR(q) = \frac{dR}{dq}\). To find total revenue, integrate the marginal revenue function.

Marginal Revenue
\(MR(q) = 100 - 2q\)
Revenue Function
\(R(q) = \int MR(q) \, dq\)
Result
\(R(30) = 1200\)
Step 1: Set up the integral

Since \(MR(q) = \frac{dR}{dq}\), we have \(R(q) = \int MR(q) \, dq\)

Step 2: Integrate the marginal revenue function

\(R(q) = \int (100 - 2q) \, dq = 100q - q^2 + C\)

Step 3: Apply initial condition

Given \(R(0) = 0\): \(0 = 100(0) - (0)^2 + C\), so \(C = 0\)

Therefore: \(R(q) = 100q - q^2\)

Step 4: Calculate revenue at \(q = 30\)

\(R(30) = 100(30) - (30)^2 = 3000 - 900 = 2100\)

\(R(30) = 2100\) dollars
Final answer:

The total revenue when 30 units are sold is $2100.

Applied rules:

• Marginal Concept: Marginal functions are derivatives of total functions

• Integration: Total function = integral of marginal function

• Initial Condition: Use to determine the constant of integration

Tip: In economics, marginal functions are derivatives of total functions (cost, revenue, profit).
Warning: Always apply initial conditions to find the particular solution!
Detailed Summary: Non-Motion Applications of Integrals Mastery
\(\text{Application} = \int_a^b f(x) \, dx\)
General Form
Key definitions:

Area Under Curve: The area between a function \(f(x)\) and the x-axis from \(x = a\) to \(x = b\) is \(\int_a^b f(x) \, dx\) when \(f(x) \geq 0\).

Volume of Revolution: The volume generated when a region is rotated about an axis, calculated using the disk, washer, or shell method.

Arc Length: The length of a curve \(y = f(x)\) from \(x = a\) to \(x = b\) is \(\int_a^b \sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx\).

Work: The energy transferred when a force acts over a distance, calculated as \(\int F(x) \, dx\) when the force varies with position.

Economic Applications: Total functions (revenue, cost, profit) are found by integrating their marginal counterparts.

Application methodology:
  1. Identify the type of application: Determine if it's area, volume, arc length, work, or economic
  2. Visualize the problem: Draw a diagram to understand the geometric setup
  3. Select the appropriate formula: Use the correct integral formula for the specific application
  4. Set up the integral: Determine the bounds and integrand based on the problem context
  5. Evaluate the integral: Use appropriate integration techniques
  6. Interpret the result: Provide the answer with correct units and context
Tip 1: For area problems, always verify that the function doesn't cross the axis in the interval.
Tip 2: In volume problems, consider which method (disk, washer, shell) is most efficient.
Tip 3: For work problems, always calculate the distance each element must travel.
Tip 4: In economic applications, marginal functions are derivatives of total functions.
Common errors: Forgetting to square the function in volume calculations, misidentifying the axis of rotation, incorrect derivative computation in arc length, not considering sign changes in area problems, improper bounds selection, missing units in final answers.
Key applications: Physics (work, fluid pressure, center of mass), engineering (cross-sectional areas, moments of inertia), economics (consumer surplus, producer surplus, total revenue), biology (growth models, population studies), chemistry (reaction rates, concentration profiles).
Complete reference formulas:

• Area: \(A = \int_a^b f(x) \, dx\) (when \(f(x) \geq 0\))

• Area Between Curves: \(A = \int_a^b |f(x) - g(x)| \, dx\)

• Volume (Disk): \(V = \pi \int_a^b [f(x)]^2 \, dx\) (rotation about x-axis)

• Volume (Washer): \(V = \pi \int_a^b ([f(x)]^2 - [g(x)]^2) \, dx\)

• Volume (Shell): \(V = 2\pi \int_a^b x \cdot f(x) \, dx\) (rotation about y-axis)

• Arc Length: \(L = \int_a^b \sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx\)

• Surface Area: \(S = 2\pi \int_a^b f(x)\sqrt{1 + \left(\frac{dy}{dx}\right)^2} \, dx\)

• Work: \(W = \int_a^b F(x) \, dx\) where \(F(x)\) is the variable force

• Economics: Total function = \(\int\) Marginal function

Examples:
Concrete Applications
Area Example: \(\int_0^2 x^2 \, dx = \frac{8}{3}\) (area under \(y = x^2\) from 0 to 2)
Volume Example: \(\pi \int_0^1 x^2 \, dx = \frac{\pi}{3}\) (volume of cone-like shape)
Arc Length Example: \(\int_0^1 \sqrt{1 + 4x^2} \, dx\) (length of \(y = x^2\))
Work Example: \(\int_0^{10} 62.4(10-y) \, dy\) (work pumping water)
Important Note: The units of your answer should match the application (area units, volume units, work units, etc.)!
Memorization Aid: Think of integration as "adding up small pieces" to find totals!

Questions & Answers

Question: How do I know which method to use for finding volumes of revolution - disk, washer, or shell?

Answer: The choice depends on the geometry of the region and the axis of rotation:

Disk Method: Use when the region touches the axis of rotation and there are no gaps. The cross-sections perpendicular to the axis of rotation are solid disks.

Washer Method: Use when the region doesn't touch the axis of rotation, creating a hollow space. The cross-sections are washers (disks with holes).

Shell Method: Use when the region is bounded by functions of the variable perpendicular to the axis of rotation. It's often easier when rotating about the y-axis for functions of x.

As a general rule: if rotating about the x-axis and region is bounded by functions of x, use disk/washer. If rotating about the y-axis and region is bounded by functions of x, shell method might be easier.

Question: Why do we need to consider the distance each element travels in work problems? Can't we just use the average distance?

Answer: Work is defined as force times distance, and since different parts of the object may need to travel different distances, we must account for this variation. For example, in the water tank problem, water at the bottom needs to travel 10 feet to reach the top, while water at the top only needs to travel 0 feet. Using an average distance would not account for the fact that more work is required to lift water from the bottom than from the top. Integration allows us to account for the varying distance by considering each infinitesimal element separately.