Disk method: When a region is revolved around an axis, it forms a solid of revolution. The volume is calculated by integrating the area of circular cross-sections perpendicular to the axis of rotation.
For revolution about the x-axis: \(V = \pi \int_a^b [f(x)]^2 dx\)
For revolution about the y-axis: \(V = \pi \int_c^d [g(y)]^2 dy\)
Where f(x) or g(y) represents the radius of the disk at each point.
The region is bounded by:
y = x² (parabola opening upward)
y = 0 (x-axis)
x = 0 (y-axis)
x = 2 (vertical line)
We're revolving about the x-axis.
For the disk method about the x-axis:
Radius of disk at x = f(x) = x²
Area of disk at x = π[f(x)]² = π[x²]² = πx⁴
Volume = \(\pi \int_0^2 [x^2]^2 dx = \pi \int_0^2 x^4 dx\)
Volume = \(\pi \int_0^2 x^4 dx\)
= \(\pi \left[\frac{x^5}{5}\right]_0^2\)
= \(\pi \left[\frac{2^5}{5} - \frac{0^5}{5}\right]\)
= \(\pi \left[\frac{32}{5} - 0\right]\)
= \(\frac{32\pi}{5}\)
The volume of the solid generated by revolving the region about the x-axis is \(\frac{32\pi}{5}\) cubic units
• Disk method formula: \(V = \pi \int_a^b [f(x)]^2 dx\)
• Power rule: \(\int x^n dx = \frac{x^{n+1}}{n+1}\)
• Circle area: Area = πr²
Washer method: Used when the region being revolved has a hole in the middle, creating a washer-shaped cross-section. Volume is calculated by subtracting the inner disk from the outer disk.
Set x² = x
x² - x = 0
x(x - 1) = 0
So x = 0 and x = 1
These are our limits of integration.
On the interval [0, 1], compare y = x and y = x²:
At x = 0.5: y = x = 0.5 and y = x² = 0.25
So y = x is above y = x² on [0, 1]
Outer radius: R(x) = x
Inner radius: r(x) = x²
For the washer method about the x-axis:
Volume = \(\pi \int_a^b [R(x)^2 - r(x)^2] dx\)
= \(\pi \int_0^1 [x^2 - (x^2)^2] dx\)
= \(\pi \int_0^1 [x^2 - x^4] dx\)
= \(\pi \left[\frac{x^3}{3} - \frac{x^5}{5}\right]_0^1\)
= \(\pi \left[\frac{1}{3} - \frac{1}{5} - 0\right]\)
= \(\pi \left[\frac{5-3}{15}\right]\)
= \(\pi \left[\frac{2}{15}\right]\)
= \(\frac{2\pi}{15}\)
The volume of the solid generated by revolving the region about the x-axis is \(\frac{2\pi}{15}\) cubic units
• Washer method formula: \(V = \pi \int_a^b [R(x)^2 - r(x)^2] dx\)
• Function ordering: Determine which function is outer vs inner
• Subtraction: Outer area minus inner area
Revolution about y-axis: When revolving about the y-axis, we use the disk or washer method with respect to y. The radius is expressed as a function of y.
We have x = y², which means the radius of the disk at height y is y².
The region extends from y = 0 to y = 2.
For revolution about the y-axis:
Volume = \(\pi \int_c^d [g(y)]^2 dy\)
Here, g(y) = y², c = 0, d = 2
Volume = \(\pi \int_0^2 [y^2]^2 dy = \pi \int_0^2 y^4 dy\)
Volume = \(\pi \int_0^2 y^4 dy\)
= \(\pi \left[\frac{y^5}{5}\right]_0^2\)
= \(\pi \left[\frac{2^5}{5} - \frac{0^5}{5}\right]\)
= \(\pi \left[\frac{32}{5}\right]\)
= \(\frac{32\pi}{5}\)
The volume of the solid generated by revolving the region about the y-axis is \(\frac{32\pi}{5}\) cubic units
• Y-axis revolution: \(V = \pi \int_c^d [g(y)]^2 dy\)
• Function of y: Express radius as function of y-coordinate
• Power rule: Integration of polynomial functions
Solid of revolution: A 3D object formed by rotating a 2D region around an axis
Disk method: Used when the cross-section is a filled circle (no hole)
Washer method: Used when the cross-section has a hole (looks like a washer/doughnut)
Axis of rotation: The line around which the region is rotated
Radius function: The distance from the axis of rotation to the boundary of the region
- Sketch the region: Visualize the area to be revolved
- Identify axis of rotation: Determine if it's x-axis, y-axis, or another line
- Determine cross-section shape: Circle (disk) or ring (washer)
- Find radius function(s): Express radius as a function of the variable of integration
- Set up integral: Apply appropriate formula with correct limits
- Evaluate: Compute the definite integral
• Disk method (x-axis): \(V = \pi \int_a^b [f(x)]^2 dx\)
• Disk method (y-axis): \(V = \pi \int_c^d [g(y)]^2 dy\)
• Washer method (x-axis): \(V = \pi \int_a^b [R(x)^2 - r(x)^2] dx\)
• Washer method (y-axis): \(V = \pi \int_c^d [R(y)^2 - r(y)^2] dy\)
• Solid has no holes
• Region touches axis of rotation
• Cross-section is full circle
• Solid has holes
• Region doesn't touch axis
• Cross-section is annulus
Revolution about horizontal line: When revolving about a horizontal line other than the x-axis, the radius is the distance from the curve to the axis of rotation.
Set x² = 4
x² = 4
x = ±2
So x = -2 and x = 2 are our limits of integration.
Since we're revolving about y = -1:
Distance from y = -1 to y = x²: r_inner = x² - (-1) = x² + 1
Distance from y = -1 to y = 4: r_outer = 4 - (-1) = 5
So outer radius R(x) = 5 and inner radius r(x) = x² + 1
For the washer method about y = -1:
Volume = \(\pi \int_{-2}^2 [R(x)^2 - r(x)^2] dx\)
= \(\pi \int_{-2}^2 [5^2 - (x^2 + 1)^2] dx\)
= \(\pi \int_{-2}^2 [25 - (x^4 + 2x^2 + 1)] dx\)
= \(\pi \int_{-2}^2 [25 - x^4 - 2x^2 - 1] dx\)
= \(\pi \int_{-2}^2 [24 - x^4 - 2x^2] dx\)
= \(\pi \left[24x - \frac{x^5}{5} - \frac{2x^3}{3}\right]_{-2}^2\)
= \(\pi \left[\left(48 - \frac{32}{5} - \frac{16}{3}\right) - \left(-48 + \frac{32}{5} + \frac{16}{3}\right)\right]\)
= \(\pi \left[96 - \frac{64}{5} - \frac{32}{3}\right]\)
= \(\pi \left[\frac{1440 - 192 - 160}{15}\right]\)
= \(\pi \left[\frac{1088}{15}\right]\)
= \(\frac{1088\pi}{15}\)
The volume of the solid generated by revolving the region about y = -1 is \(\frac{1088\pi}{15}\) cubic units
• Shifted axis: Radius = distance from curve to axis of rotation
• Washer method: Subtract inner area from outer area
• Algebraic expansion: Properly expand (x² + 1)²
Trigonometric revolution: When revolving trigonometric functions, we often need to use trigonometric identities to simplify the integrand, especially when dealing with squared functions.
For the disk method about the x-axis:
Volume = \(\pi \int_a^b [f(x)]^2 dx\)
Here, f(x) = sin(x), a = 0, b = π
Volume = \(\pi \int_0^\pi [\sin(x)]^2 dx = \pi \int_0^\pi \sin^2(x) dx\)
We use the identity: \(\sin^2(x) = \frac{1 - \cos(2x)}{2}\)
Volume = \(\pi \int_0^\pi \frac{1 - \cos(2x)}{2} dx\)
= \(\frac{\pi}{2} \int_0^\pi (1 - \cos(2x)) dx\)
Volume = \(\frac{\pi}{2} \int_0^\pi (1 - \cos(2x)) dx\)
= \(\frac{\pi}{2} \left[x - \frac{\sin(2x)}{2}\right]_0^\pi\)
= \(\frac{\pi}{2} \left[\left(\pi - \frac{\sin(2\pi)}{2}\right) - \left(0 - \frac{\sin(0)}{2}\right)\right]\)
= \(\frac{\pi}{2} \left[\left(\pi - 0\right) - \left(0 - 0\right)\right]\)
= \(\frac{\pi}{2} \cdot \pi\)
= \(\frac{\pi^2}{2}\)
The volume of the solid generated by revolving the region about the x-axis is \(\frac{\pi^2}{2}\) cubic units
• Trigonometric identity: \(\sin^2(x) = \frac{1 - \cos(2x)}{2}\)
• Power reduction: Simplify squared trigonometric functions
• Integration: Standard antiderivatives for trigonometric functions
Comprehensive Summary: Disk and Washer Methods
Solid of Revolution: A 3D object formed by rotating a 2D region around an axis.
Disk Method: Used when cross-sections perpendicular to the axis of rotation are filled circles.
Washer Method: Used when cross-sections have a hole in the middle (like a washer).
Radius: Distance from the axis of rotation to the boundary of the region.
Axis of Rotation: The line around which the region is rotated.
Disk Method (x-axis): V = π∫[f(x)]²dx
Disk Method (y-axis): V = π∫[g(y)]²dy
Washer Method (x-axis): V = π∫[R(x)² - r(x)²]dx
Washer Method (y-axis): V = π∫[R(y)² - r(y)²]dy
General Principle: V = ∫(Cross-sectional area) dx or dy
1. Sketch the region: Draw the bounded area and axis of rotation.
2. Determine cross-section: Decide if it's a disk (solid) or washer (with hole).
3. Find radius/radii: Express as function(s) of the variable of integration.
4. Set limits: Determine bounds of integration.
5. Set up integral: Apply appropriate formula.
6. Evaluate: Compute the definite integral.
Simple Disk: y = x² rotated about x-axis creates a paraboloid.
Washer: Region between y = x² and y = x creates a solid with a hole.
Shifted Axes: Rotating about lines like y = -1 requires adjusting radius calculations.
Trigonometric: sin²(x) requires power reduction identities for integration.
Real-world: Cylindrical tanks, pipes, decorative objects.
Tips: Always sketch the region; remember radius is distance to axis; use symmetry when possible.
Pitfalls: Confusing disk vs washer method; forgetting to square the radius; incorrect limits of integration.
Verification: Check that volume is positive; ensure radius is positive distance.
Visualization: Imagine the solid being formed by stacking disks or washers.
"Disk or Washer?": If region touches axis of rotation → Disk; if not → Washer.
"Squares are everywhere": Both methods involve squaring the radius function.
"Pi ties it together": π is always multiplied by the integral of squared radii.
"Distance matters": Radius is always the perpendicular distance from axis to curve.
Questions & Answers
Question: How do I know whether to use the disk method or the washer method for a given problem? What's the key difference?
Answer: The key difference is in the cross-section of the solid:
- Disk Method: Use when the cross-section perpendicular to the axis of rotation is a filled circle (no hole). This happens when the region touches the axis of rotation.
- Washer Method: Use when the cross-section has a hole in the middle (like a washer or doughnut). This happens when there's a gap between the region and the axis of rotation.
For example, if you rotate the region under y = x² from x = 0 to x = 2 about the x-axis, you get a solid without any holes - use the disk method. But if you rotate the region between y = x² and y = x about the x-axis, you get a solid with a hole - use the washer method.
Question: When revolving about lines other than the coordinate axes (like y = -1), how do I calculate the radius for the disk or washer method?
Answer: The radius is always the perpendicular distance from the axis of rotation to the curve. For horizontal lines like y = k:
If revolving about y = k, the radius is |f(x) - k|, where f(x) is the function representing the boundary of the region.
For example, if revolving the region between y = x² and y = 4 about y = -1:
- Distance from y = -1 to y = 4: |4 - (-1)| = 5 (outer radius)
- Distance from y = -1 to y = x²: |x² - (-1)| = x² + 1 (inner radius)
Always think of the radius as the shortest distance from the axis of rotation to the boundary of the region.
Question: Why do we square the radius function in the disk and washer methods? Where does this come from?
Answer: The squaring comes from the area formula for a circle. When we slice the solid perpendicular to the axis of rotation, we get circular cross-sections.
The area of a circle is A = πr², where r is the radius of the circle. In the disk method, each slice has area π[f(x)]², and in the washer method, each slice has area π[R² - r²].
When we integrate these cross-sectional areas along the axis of rotation, we get the total volume. This is essentially the method of slicing in 3D, where we add up the volumes of infinitely many thin disks or washers.