Exponential Growth Model: When a quantity grows at a rate proportional to its current amount, it follows the differential equation \(\frac{dP}{dt} = kP\), where \(k > 0\) is the growth constant.
- Set up the differential equation based on the given information
- Solve the differential equation to get the general solution
- Use initial conditions to find the specific solution
- Use additional information to determine the growth/decay constant
Since the growth rate is proportional to the population: \(\frac{dP}{dt} = kP\), where \(k > 0\).
Separate variables: \(\frac{dP}{P} = k \, dt\)
Integrate: \(\int \frac{dP}{P} = \int k \, dt\)
\(\ln|P| = kt + C\)
Exponentiate: \(|P| = e^{kt + C} = e^C \cdot e^{kt}\)
Let \(A = e^C\): \(P = Ae^{kt}\)
At \(t = 0\), \(P(0) = 100\): \(100 = Ae^{k \cdot 0} = A \cdot 1 = A\)
So \(A = 100\) and \(P(t) = 100e^{kt}\).
Population doubles every 3 hours: \(P(3) = 2 \cdot P(0) = 2 \cdot 100 = 200\)
\(200 = 100e^{3k}\)
\(2 = e^{3k}\)
\(\ln 2 = 3k\)
\(k = \frac{\ln 2}{3}\)
\(P(t) = 100e^{(\ln 2/3)t}\)
This can also be written as: \(P(t) = 100 \cdot 2^{t/3}\)
The population after \(t\) hours is given by \(P(t) = 100e^{(\ln 2/3)t}\) or equivalently \(P(t) = 100 \cdot 2^{t/3}\).
• Exponential Growth: \(\frac{dP}{dt} = kP\) with \(k > 0\)
• Proportionality: Rate of change is proportional to current value
• Initial Condition: Use to determine the initial value constant
• Doubling Time: Use to determine the growth constant
Exponential Decay Model: When a quantity decreases at a rate proportional to its current amount, it follows the differential equation \(\frac{dA}{dt} = -kA\), where \(k > 0\) is the decay constant.
For decay, the rate is proportional to the current amount: \(\frac{dA}{dt} = -kA\), where \(k > 0\).
Separate variables: \(\frac{dA}{A} = -k \, dt\)
Integrate: \(\int \frac{dA}{A} = \int -k \, dt\)
\(\ln|A| = -kt + C\)
Exponentiate: \(|A| = e^{-kt + C} = e^C \cdot e^{-kt}\)
Let \(A_0 = e^C\): \(A = A_0e^{-kt}\)
At \(t = 0\), \(A(0) = 500\): \(500 = A_0e^{-k \cdot 0} = A_0 \cdot 1 = A_0\)
So \(A_0 = 500\) and \(A(t) = 500e^{-kt}\).
Half-life is 10 years: \(A(10) = \frac{1}{2} \cdot A(0) = \frac{1}{2} \cdot 500 = 250\)
\(250 = 500e^{-10k}\)
\(\frac{1}{2} = e^{-10k}\)
\(\ln \frac{1}{2} = -10k\)
\(-\ln 2 = -10k\)
\(k = \frac{\ln 2}{10}\)
\(A(25) = 500e^{-(\ln 2/10) \cdot 25}\)
\(A(25) = 500e^{-(25\ln 2)/10} = 500e^{-(5\ln 2)/2}\)
\(A(25) = 500e^{\ln 2^{-5/2}} = 500 \cdot 2^{-5/2}\)
\(A(25) = 500 \cdot \frac{1}{2^{5/2}} = 500 \cdot \frac{1}{\sqrt{32}} = 500 \cdot \frac{1}{4\sqrt{2}} = \frac{500}{4\sqrt{2}}\)
\(A(25) = \frac{125}{\sqrt{2}} = \frac{125\sqrt{2}}{2} \approx 88.39\) grams
After 25 years, approximately 88.39 grams of the radioactive substance remains.
• Exponential Decay: \(\frac{dA}{dt} = -kA\) with \(k > 0\)
• Half-life: Amount reduces to half after the half-life period
• Decay Constant: \(k = \frac{\ln 2}{\text{half-life}}\)
• Logarithmic Property: \(\ln \frac{1}{2} = -\ln 2\)
Continuous Compound Interest: When interest is compounded continuously, the amount follows the differential equation \(\frac{dA}{dt} = rA\), where \(r\) is the annual interest rate.
For continuous compounding, the rate of change equals the interest rate times the current amount: \(\frac{dA}{dt} = 0.05A\).
This is the same form as exponential growth: \(\frac{dA}{dt} = rA\)
The solution is: \(A(t) = A_0e^{rt}\)
Initial investment: \(A_0 = 1000\)
Interest rate: \(r = 0.05\)
So \(A(t) = 1000e^{0.05t}\).
\(A(10) = 1000e^{0.05 \cdot 10} = 1000e^{0.5}\)
\(A(10) = 1000e^{0.5} \approx 1000 \cdot 1.64872 = 1648.72\)
The investment grows from $1000 to approximately $1648.72 over 10 years with continuous compounding at 5% annually.
After 10 years, the investment will be worth approximately $1648.72.
• Continuous Compounding: \(\frac{dA}{dt} = rA\) where \(r\) is the interest rate
• General Solution: \(A(t) = A_0e^{rt}\)
• Initial Value: Principal amount serves as the initial condition
• Time Units: Ensure consistent units for time and rate
Exponential Model: A mathematical model where the rate of change of a quantity is proportional to the quantity itself.
Growth Constant: The positive constant \(k\) in growth models \(\frac{dP}{dt} = kP\).
Decay Constant: The positive constant \(k\) in decay models \(\frac{dP}{dt} = -kP\).
Half-life: The time required for a quantity to reduce to half its initial value in decay processes.
Doubling Time: The time required for a quantity to double in growth processes.
- Identify the situation: Determine if it's growth or decay
- Set up the equation: Write the appropriate differential equation
- Solve the equation: Find the general solution
- Apply initial conditions: Use initial values to find constants
- Use additional information: Determine growth/decay constants
- Make predictions: Calculate values at specific times
• General Form: \(\frac{dP}{dt} = kP\) with solution \(P(t) = P_0e^{kt}\)
• Growth: \(k > 0\), population increases exponentially
• Decay: \(k < 0\) or use \(-k\) with \(k > 0\), population decreases exponentially
• Half-life: \(t_{1/2} = \frac{\ln 2}{k}\) for decay constant \(k\)
• Doubling time: \(t_{\text{double}} = \frac{\ln 2}{k}\) for growth constant \(k\)
• Compound Interest: \(A(t) = A_0e^{rt}\) where \(r\) is the interest rate
Newton's Law of Cooling: The rate of change of temperature is proportional to the difference between the object's temperature and the ambient temperature: \(\frac{dT}{dt} = -k(T - T_a)\), where \(T_a\) is ambient temperature.
Newton's law of cooling: \(\frac{dT}{dt} = -k(T - T_a)\), where \(T_a = 20°C\).
So: \(\frac{dT}{dt} = -k(T - 20)\).
This is a linear first-order equation. Let \(u = T - 20\), then \(\frac{du}{dt} = \frac{dT}{dt}\).
\(\frac{du}{dt} = -ku\), which has solution \(u = u_0e^{-kt}\).
Therefore: \(T - 20 = (T_0 - 20)e^{-kt}\).
So: \(T(t) = 20 + (T_0 - 20)e^{-kt}\).
At \(t = 0\), \(T(0) = 90°C\): \(90 = 20 + (T_0 - 20)e^{0}\)
\(90 = 20 + (90 - 20) \cdot 1\)
This confirms our general solution: \(T(t) = 20 + 70e^{-kt}\).
At \(t = 10\), \(T(10) = 70°C\): \(70 = 20 + 70e^{-10k}\)
\(50 = 70e^{-10k}\)
\(\frac{50}{70} = e^{-10k}\)
\(\frac{5}{7} = e^{-10k}\)
\(\ln \frac{5}{7} = -10k\)
\(k = -\frac{1}{10}\ln \frac{5}{7} = \frac{1}{10}\ln \frac{7}{5}\)
\(T(30) = 20 + 70e^{-30k} = 20 + 70e^{-30 \cdot \frac{1}{10}\ln \frac{7}{5}}\)
\(T(30) = 20 + 70e^{-3\ln \frac{7}{5}} = 20 + 70e^{\ln (\frac{7}{5})^{-3}}\)
\(T(30) = 20 + 70 \cdot \left(\frac{7}{5}\right)^{-3} = 20 + 70 \cdot \left(\frac{5}{7}\right)^{3}\)
\(T(30) = 20 + 70 \cdot \frac{125}{343} = 20 + \frac{8750}{343} \approx 20 + 25.5 = 45.5°C\)
After 30 minutes, the coffee will be at approximately 45.5°C.
• Newton's Law: \(\frac{dT}{dt} = -k(T - T_a)\)
• Substitution Method: Let \(u = T - T_a\) to simplify
• Logarithmic Properties: \(\ln \frac{a}{b} = -\ln \frac{b}{a}\)
• Exponential Property: \(e^{\ln x} = x\)
Bacterial Growth: When resources are unlimited, bacteria typically exhibit exponential growth following the model \(\frac{dP}{dt} = kP\), where \(P\) is the population and \(k\) is the growth constant.
\(\frac{dP}{dt} = kP\) with solution \(P(t) = P_0e^{kt}\).
At \(t = 0\), \(P(0) = 500\): \(P_0 = 500\)
So \(P(t) = 500e^{kt}\).
At \(t = 4\), \(P(4) = 2000\): \(2000 = 500e^{4k}\)
\(4 = e^{4k}\)
\(\ln 4 = 4k\)
\(k = \frac{\ln 4}{4} = \frac{\ln 2^2}{4} = \frac{2\ln 2}{4} = \frac{\ln 2}{2}\)
\(P(10) = 500e^{10k} = 500e^{10 \cdot \frac{\ln 2}{2}} = 500e^{5\ln 2}\)
\(P(10) = 500e^{\ln 2^5} = 500 \cdot 2^5 = 500 \cdot 32 = 16000\)
Check: \(P(4) = 500e^{4 \cdot \frac{\ln 2}{2}} = 500e^{2\ln 2} = 500 \cdot 2^2 = 500 \cdot 4 = 2000\) ✓
The growth constant is \(k = \frac{\ln 2}{2} \approx 0.3466\) per hour, and the population after 10 hours will be 16,000 cells.
• Exponential Growth: \(\frac{dP}{dt} = kP\)
• General Solution: \(P(t) = P_0e^{kt}\)
• Logarithmic Property: \(\ln a^b = b\ln a\)
• Exponential Property: \(e^{\ln x} = x\)
Exponential Model: A mathematical model where the rate of change of a quantity is proportional to the quantity itself, described by the differential equation \(\frac{dP}{dt} = kP\).
Growth Constant: The positive constant \(k\) in growth models, representing the relative rate of increase.
Decay Constant: The positive constant \(k\) in decay models, representing the relative rate of decrease.
Half-life: The time required for a quantity to reduce to half its initial value in exponential decay processes.
Doubling Time: The time required for a quantity to double in exponential growth processes.
- Identify the scenario: Determine if it's growth (population, investment) or decay (radioactive, cooling)
- Set up the differential equation: Write \(\frac{dP}{dt} = kP\) or \(\frac{dP}{dt} = -kP\)
- Solve the equation: Obtain the general solution \(P(t) = P_0e^{kt}\)
- Apply initial conditions: Use initial values to find the specific solution
- Use additional data: Determine the constant \(k\) using provided information
- Make predictions: Calculate values at desired times using the complete model
• General Form: \(\frac{dP}{dt} = kP\) with solution \(P(t) = P_0e^{kt}\)
• Growth: \(k > 0\), population increases exponentially
• Decay: \(k < 0\) or use \(-k\) with \(k > 0\), population decreases exponentially
• Half-life: \(t_{1/2} = \frac{\ln 2}{k}\) for decay constant \(k\)
• Doubling time: \(t_{\text{double}} = \frac{\ln 2}{k}\) for growth constant \(k\)
• Compound Interest: \(A(t) = A_0e^{rt}\) where \(r\) is the interest rate
• Newton's Law: \(\frac{dT}{dt} = -k(T - T_a)\) with solution \(T(t) = T_a + (T_0 - T_a)e^{-kt}\)
Questions & Answers
Question: How do I know when to use exponential growth versus exponential decay in a word problem?
Answer: Look for key phrases and concepts:
Exponential Growth:
- Population increases, bacteria multiply, investments grow
- Phrases like "grows at a rate proportional to its size"
- "Doubles every X hours", "increases by X% annually"
- Compound interest, inflation, viral spread
Exponential Decay:
- Radioactive substances decay, drugs metabolize
- Objects cool down, temperatures approach equilibrium
- Phrases like "decreases at a rate proportional to its amount"
- "Half-life", "decays to half its original value", "cools to room temperature"
The key is whether the quantity is increasing (growth, \(k > 0\)) or decreasing (decay, \(k < 0\)) over time.
Question: Why does the differential equation for Newton's law of cooling have the form \(\frac{dT}{dt} = -k(T - T_a)\) rather than just \(\frac{dT}{dt} = -kT\)?
Answer: This is a fundamental concept in physics! Newton's law of cooling states that the rate of heat loss is proportional to the temperature difference between the object and its surroundings.
The key insight is that cooling depends on the difference in temperature, not the absolute temperature:
- If an object is at 100°C in a 20°C room, the temperature difference is 80°C
- If an object is at 40°C in a 20°C room, the temperature difference is 20°C
- The first object cools faster because the temperature difference is larger
If we used \(\frac{dT}{dt} = -kT\), the object would cool forever, approaching 0°C, which is unrealistic. With \(\frac{dT}{dt} = -k(T - T_a)\), the object approaches the ambient temperature \(T_a\), which is what happens in reality.
Question: How do I handle unit conversions when working with exponential models? Sometimes I see different time units in problems.
Answer: Consistency in units is crucial for exponential models. Here's how to handle conversions:
Method:
- Identify the time unit of your growth/decay constant \(k\)
- Convert all time measurements to match this unit
- For example, if \(k\) is per hour and you have minutes, convert minutes to hours
Examples:
- If \(k = 0.1\) per hour and you want the value after 30 minutes: use \(t = 0.5\) hours
- If \(k = 0.05\) per day and you want the value after 12 hours: use \(t = 0.5\) days
- Always check that the units of \(kt\) are dimensionless (no units)
A common mistake is using different time units in the same calculation. Always convert to a consistent unit system before substituting into the formula.