Solved Exercises on Reasoning Using Slope Fields in Calculus 1

Master reasoning using slope fields: solution behavior, equilibrium analysis, and qualitative predictions through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Solution Behavior Analysis
Exercise 1
Given the slope field for \(\frac{dy}{dx} = y(2-y)\), analyze the behavior of solutions starting at \(y(0) = 0.5\), \(y(0) = 1.5\), and \(y(0) = 3\).
Definition:

Qualitative Analysis: Using slope fields to understand the behavior of solutions without solving the equation analytically.

Reasoning method:
  1. Identify critical points where \(\frac{dy}{dx} = 0\)
  2. Determine the sign of \(\frac{dy}{dx}\) in each region
  3. Analyze the direction of solution curves in each region
  4. Predict long-term behavior based on initial conditions
Differential Equation
\(\frac{dy}{dx} = y(2-y)\)
Critical Points
\(y = 0\) and \(y = 2\)
Behavior
Solutions approach \(y = 2\)
Step 1: Find critical points

Set \(\frac{dy}{dx} = 0\): \(y(2-y) = 0\)

Therefore, \(y = 0\) and \(y = 2\) are critical points.

Step 2: Analyze the sign of \(\frac{dy}{dx}\) in each region
  • When \(y < 0\): \(\frac{dy}{dx} = y(2-y) < 0\) (since \(y < 0\) and \(2-y > 2 > 0\))
  • When \(0 < y < 2\): \(\frac{dy}{dx} = y(2-y) > 0\) (since \(y > 0\) and \(2-y > 0\))
  • When \(y > 2\): \(\frac{dy}{dx} = y(2-y) < 0\) (since \(y > 0\) and \(2-y < 0\))
Step 3: Analyze behavior for each initial condition
  • Starting at \(y(0) = 0.5\): Since \(0 < 0.5 < 2\), \(\frac{dy}{dx} > 0\), so the solution increases toward \(y = 2\).
  • Starting at \(y(0) = 1.5\): Since \(0 < 1.5 < 2\), \(\frac{dy}{dx} > 0\), so the solution increases toward \(y = 2\).
  • Starting at \(y(0) = 3\): Since \(3 > 2\), \(\frac{dy}{dx} < 0\), so the solution decreases toward \(y = 2\).
Step 4: Predict long-term behavior

As \(x \to \infty\), all solutions with \(y(0) > 0\) approach \(y = 2\). Solutions with \(y(0) < 0\) decrease toward \(-\infty\).

All positive solutions approach \(y = 2\) as \(x \to \infty\)
Final answer:

Solutions with initial conditions \(y(0) = 0.5\) and \(y(0) = 1.5\) both increase toward \(y = 2\). The solution with \(y(0) = 3\) decreases toward \(y = 2\). All positive solutions approach \(y = 2\) as \(x \to \infty\).

Applied rules:

• Sign Analysis: Determine the sign of \(\frac{dy}{dx}\) in each region

• Monotonicity: Positive slope implies increasing, negative slope implies decreasing

• Long-term Behavior: Solutions approach stable equilibria

Tip: Critical points act as "barriers" that solutions approach but don't cross.
Warning: Solutions cannot cross equilibrium solutions!
2 Equilibrium Stability
Exercise 2
Analyze the stability of equilibrium points for the differential equation \(\frac{dy}{dx} = y^2 - 4\) using its slope field.
Definition:

Stability Analysis: Determining whether nearby solutions approach or move away from equilibrium points.

Stable Equilibrium: Solutions starting near the equilibrium approach it.

Unstable Equilibrium: Solutions starting near the equilibrium move away from it.

Differential Equation
\(\frac{dy}{dx} = y^2 - 4\)
Critical Points
\(y = -2\) and \(y = 2\)
Stability
\(y = -2\) stable, \(y = 2\) unstable
Step 1: Find critical points

Set \(\frac{dy}{dx} = 0\): \(y^2 - 4 = 0\), so \(y^2 = 4\)

Therefore, \(y = -2\) and \(y = 2\) are critical points.

Step 2: Analyze the sign of \(\frac{dy}{dx}\) in each region
  • When \(y < -2\): \(\frac{dy}{dx} = y^2 - 4 > 0\) (since \(y^2 > 4\))
  • When \(-2 < y < 2\): \(\frac{dy}{dx} = y^2 - 4 < 0\) (since \(y^2 < 4\))
  • When \(y > 2\): \(\frac{dy}{dx} = y^2 - 4 > 0\) (since \(y^2 > 4\))
Step 3: Analyze stability of \(y = -2\)

For \(y\) slightly less than \(-2\), \(\frac{dy}{dx} > 0\), so solutions increase toward \(y = -2\).

For \(y\) slightly greater than \(-2\), \(\frac{dy}{dx} < 0\), so solutions decrease toward \(y = -2\).

Therefore, \(y = -2\) is a stable equilibrium.

Step 4: Analyze stability of \(y = 2\)

For \(y\) slightly less than \(2\), \(\frac{dy}{dx} < 0\), so solutions decrease away from \(y = 2\).

For \(y\) slightly greater than \(2\), \(\frac{dy}{dx} > 0\), so solutions increase away from \(y = 2\).

Therefore, \(y = 2\) is an unstable equilibrium.

Step 5: Conclusion

Solutions starting near \(y = -2\) approach it, while solutions starting near \(y = 2\) move away from it.

\(y = -2\) is stable, \(y = 2\) is unstable
Final answer:

The equilibrium point \(y = -2\) is stable (solutions approach it), while \(y = 2\) is unstable (solutions move away from it).

Applied rules:

• Stability Test: Check slope direction on both sides of equilibrium

• Stable Equilibrium: Slopes point toward the equilibrium

• Unstable Equilibrium: Slopes point away from the equilibrium

Tip: Stable equilibria act like "attractors" while unstable ones act like "repellers".
Warning: The sign of \(\frac{dy}{dx}\) determines the direction of movement!
3 Long-term Predictions
Exercise 3
Using the slope field for \(\frac{dy}{dx} = y(y-1)(y-3)\), predict the long-term behavior of solutions with initial conditions \(y(0) = 0.5\), \(y(0) = 1.5\), and \(y(0) = 2.5\).
Definition:

Long-term Behavior: The limiting value of solutions as \(x \to \infty\), determined by analyzing the slope field and equilibrium points.

Differential Equation
\(\frac{dy}{dx} = y(y-1)(y-3)\)
Critical Points
\(y = 0\), \(y = 1\), \(y = 3\)
Predictions
Solutions approach stable equilibria
Step 1: Find critical points

Set \(\frac{dy}{dx} = 0\): \(y(y-1)(y-3) = 0\)

Therefore, \(y = 0\), \(y = 1\), and \(y = 3\) are critical points.

Step 2: Analyze the sign of \(\frac{dy}{dx}\) in each region
  • When \(y < 0\): \(\frac{dy}{dx} = y(y-1)(y-3) < 0\) (since \(y < 0\), \(y-1 < 0\), \(y-3 < 0\), so product is negative)
  • When \(0 < y < 1\): \(\frac{dy}{dx} = y(y-1)(y-3) > 0\) (since \(y > 0\), \(y-1 < 0\), \(y-3 < 0\), so product is positive)
  • When \(1 < y < 3\): \(\frac{dy}{dx} = y(y-1)(y-3) < 0\) (since \(y > 0\), \(y-1 > 0\), \(y-3 < 0\), so product is negative)
  • When \(y > 3\): \(\frac{dy}{dx} = y(y-1)(y-3) > 0\) (since \(y > 0\), \(y-1 > 0\), \(y-3 > 0\), so product is positive)
Step 3: Analyze stability of each equilibrium
  • At \(y = 0\): Solutions below decrease away, solutions above increase toward it → Unstable
  • At \(y = 1\): Solutions below increase toward it, solutions above decrease toward it → Stable
  • At \(y = 3\): Solutions below decrease away, solutions above increase away → Unstable
Step 4: Predict behavior for each initial condition
  • Starting at \(y(0) = 0.5\): Since \(0 < 0.5 < 1\) and \(\frac{dy}{dx} > 0\), the solution increases toward \(y = 1\).
  • Starting at \(y(0) = 1.5\): Since \(1 < 1.5 < 3\) and \(\frac{dy}{dx} < 0\), the solution decreases toward \(y = 1\).
  • Starting at \(y(0) = 2.5\): Since \(1 < 2.5 < 3\) and \(\frac{dy}{dx} < 0\), the solution decreases toward \(y = 1\).
Step 5: Conclusion

All three solutions approach the stable equilibrium \(y = 1\) as \(x \to \infty\).

All solutions approach \(y = 1\) as \(x \to \infty\)
Final answer:

For all three initial conditions, solutions approach the stable equilibrium \(y = 1\) as \(x \to \infty\). The long-term behavior is independent of the specific initial value within the basin of attraction of \(y = 1\).

Applied rules:

• Basin of Attraction: Region where all solutions approach the same equilibrium

• Stability Analysis: Determines which equilibrium attracts nearby solutions

• Sign Changes: Determine direction of solution movement

Tip: The "basin of attraction" determines which equilibrium a solution approaches.
Warning: Solutions always approach stable equilibria when they exist in their region!
Rules and methods, laws,...
\(\frac{dy}{dx} = f(x,y)\)
General Form
Critical Points
Set \(\frac{dy}{dx} = 0\)
Equilibrium Solutions
Stability
Analyze nearby slopes
Attracting/Repelling
Long-term
Predict using equilibria
Behavior as \(x \to \infty\)
Key definitions:

Critical Point: A point where \(\frac{dy}{dx} = 0\), representing an equilibrium solution.

Stable Equilibrium: An equilibrium where nearby solutions approach it as \(x\) increases.

Unstable Equilibrium: An equilibrium where nearby solutions move away from it as \(x\) increases.

Basin of Attraction: The set of initial conditions leading to solutions that approach a particular stable equilibrium.

Reasoning methodology:
  1. Identify critical points: Solve \(\frac{dy}{dx} = 0\)
  2. Analyze stability: Examine slopes near each critical point
  3. Determine regions: Identify where solutions increase/decrease
  4. Predict behavior: Determine long-term outcomes based on initial conditions
Tip 1: Solutions always move in the direction of the slope field.
Tip 2: Stable equilibria attract nearby solutions.
Tip 3: Solutions cannot cross equilibrium points.
Common errors: Misidentifying stability, not considering the sign of the derivative, ignoring the constraint that solutions cannot cross equilibrium points.
Key applications: Population dynamics, chemical reactions, economic models, physical systems.
Essential reasoning rules to memorize:

• Monotonicity: Positive slope implies increasing, negative slope implies decreasing

• Stability: Stable equilibria attract nearby solutions

• Impossibility: Solutions cannot cross equilibrium solutions

• Long-term: Solutions approach stable equilibria when available

• Conservation: Solutions remain in the same region as their initial condition

Solution: Exercises 4 to 5
4 Basin of Attraction
Exercise 4
For the differential equation \(\frac{dy}{dx} = (y-1)^2(y+1)\), determine the basins of attraction for each stable equilibrium.
Definition:

Basin of Attraction: The set of all initial conditions for which solutions approach a particular stable equilibrium as \(x \to \infty\).

Differential Equation
\(\frac{dy}{dx} = (y-1)^2(y+1)\)
Critical Points
\(y = 1\) and \(y = -1\)
Basins
Only \(y = -1\) is stable
Step 1: Find critical points

Set \(\frac{dy}{dx} = 0\): \((y-1)^2(y+1) = 0\)

Therefore, \(y = 1\) (double root) and \(y = -1\) are critical points.

Step 2: Analyze the sign of \(\frac{dy}{dx}\) in each region
  • When \(y < -1\): \(\frac{dy}{dx} = (y-1)^2(y+1) < 0\) (since \((y-1)^2 > 0\) and \(y+1 < 0\))
  • When \(-1 < y < 1\): \(\frac{dy}{dx} = (y-1)^2(y+1) > 0\) (since \((y-1)^2 > 0\) and \(y+1 > 0\))
  • When \(y > 1\): \(\frac{dy}{dx} = (y-1)^2(y+1) > 0\) (since \((y-1)^2 > 0\) and \(y+1 > 0\))
Step 3: Analyze stability of each equilibrium
  • At \(y = -1\): Solutions below decrease away, solutions above increase toward it → Semi-stable (unstable from below, stable from above)
  • At \(y = 1\): Solutions below increase toward it, solutions above increase away from it → Semi-stable (stable from below, unstable from above)
Step 4: Determine basins of attraction
  • Solutions with \(y(0) < -1\): Decrease toward \(-\infty\)
  • Solutions with \(-1 < y(0) < 1\): Increase toward \(y = 1\)
  • Solutions with \(y(0) > 1\): Increase toward \(+\infty\)
Step 5: Conclusion

The basin of attraction for \(y = 1\) is the interval \((-1, 1)\). There is no basin of attraction for \(y = -1\) since it's not stable from below.

Basin of attraction for \(y = 1\) is \((-1, 1)\)
Final answer:

The basin of attraction for the equilibrium \(y = 1\) is the open interval \((-1, 1)\). Solutions starting in this interval approach \(y = 1\) as \(x \to \infty\).

Applied rules:

• Basin Identification: Determine which initial conditions lead to each stable equilibrium

• Semi-stable Equilibrium: Stable from one side, unstable from the other

• Boundary Analysis: Determine behavior at the edges of basins

Tip: The basin of attraction is the range of initial values that lead to the same long-term behavior.
Warning: Double roots (even powers) don't change the sign of the derivative!
5 Boundary Behavior
Exercise 5
Analyze the boundary behavior of solutions to \(\frac{dy}{dx} = \frac{y^2-x}{y}\) near the line \(y = 0\) and the parabola \(y^2 = x\).
Definition:

Boundary Behavior: How solutions behave near special curves where the differential equation has unusual characteristics (zeros, undefined points, etc.).

Differential Equation
\(\frac{dy}{dx} = \frac{y^2-x}{y}\)
Boundaries
\(y = 0\) and \(y^2 = x\)
Behavior
Undefined at \(y = 0\)
Step 1: Identify problematic boundaries

The equation \(\frac{dy}{dx} = \frac{y^2-x}{y}\) is undefined when \(y = 0\). Solutions cannot cross the x-axis.

Step 2: Analyze the line \(y^2 = x\)

On the parabola \(y^2 = x\), we have \(\frac{dy}{dx} = \frac{y^2-x}{y} = \frac{x-x}{y} = \frac{0}{y} = 0\).

So along the parabola \(y^2 = x\) (where \(y \neq 0\)), the slope is zero.

Step 3: Analyze regions divided by the parabola
  • Inside the parabola (\(y^2 < x\)): \(\frac{dy}{dx} = \frac{y^2-x}{y} < 0\) when \(y > 0\), \(\frac{dy}{dx} > 0\) when \(y < 0\)
  • Outside the parabola (\(y^2 > x\)): \(\frac{dy}{dx} = \frac{y^2-x}{y} > 0\) when \(y > 0\), \(\frac{dy}{dx} < 0\) when \(y < 0\)
Step 4: Analyze behavior near \(y = 0\)

Solutions cannot cross the x-axis (\(y = 0\)) because the differential equation is undefined there. Solutions remain in the same half-plane as their initial condition.

Step 5: Conclusion

Solutions starting with \(y(0) > 0\) remain in the upper half-plane and approach the parabola \(y^2 = x\) from above. Solutions starting with \(y(0) < 0\) remain in the lower half-plane and approach the parabola from below.

Solutions stay in their initial half-plane and approach the parabola \(y^2 = x\)
Final answer:

Solutions cannot cross the x-axis due to the undefined nature of the equation there. Solutions approach the parabola \(y^2 = x\) where they have horizontal tangents. The parabola acts as a boundary where solution curves have zero slope.

Applied rules:

• Undefined Points: Solutions cannot cross points where the equation is undefined

• Zero-Slope Curves: Identify curves where \(\frac{dy}{dx} = 0\)

• Region Analysis: Analyze behavior in different regions separated by special curves

Tip: Identify all curves where the equation is undefined or has special properties.
Warning: Undefined points create barriers that solutions cannot cross!
Detailed Summary: Reasoning Using Slope Fields Mastery
\(\frac{dy}{dx} = f(x,y)\)
General Form
Key definitions:

Critical Point: A point where \(\frac{dy}{dx} = 0\), representing an equilibrium solution where the rate of change is zero.

Stable Equilibrium: An equilibrium where nearby solutions approach it as \(x\) increases; small perturbations decay over time.

Unstable Equilibrium: An equilibrium where nearby solutions move away from it as \(x\) increases; small perturbations grow over time.

Basin of Attraction: The set of all initial conditions for which solutions approach a particular stable equilibrium as \(x \to \infty\).

Semi-stable Equilibrium: An equilibrium that is stable from one side and unstable from the other.

Comprehensive reasoning methodology:
  1. Identify critical points: Solve \(\frac{dy}{dx} = 0\) to find equilibrium solutions
  2. Analyze stability: Examine the sign of \(\frac{dy}{dx}\) near each critical point
  3. Determine regions: Identify where solutions increase or decrease based on sign of \(\frac{dy}{dx}\)
  4. Identify special curves: Find curves where \(\frac{dy}{dx} = 0\) or is undefined
  5. Predict behavior: Determine long-term outcomes based on initial conditions
  6. Consider constraints: Account for barriers and limitations on solution paths
Tip 1: Solutions always follow the direction of the slope field and cannot cross equilibrium solutions.
Tip 2: Stable equilibria act as attractors, pulling nearby solutions toward them.
Tip 3: The sign of \(\frac{dy}{dx}\) determines whether solutions are increasing or decreasing.
Tip 4: Basins of attraction define which equilibrium solutions will approach based on initial conditions.
Common errors: Misidentifying stability, not considering the sign of the derivative, ignoring the constraint that solutions cannot cross equilibrium points, overlooking undefined regions.
Key applications: Population dynamics, chemical reactions, economic models, epidemiology, physics systems.
Complete reasoning reference:

• Monotonicity: Positive slope implies increasing, negative slope implies decreasing

• Stability: Stable equilibria attract nearby solutions, unstable ones repel them

• Impossibility: Solutions cannot cross equilibrium solutions

• Long-term: Solutions approach stable equilibria when available

• Conservation: Solutions remain in the same region as their initial condition

• Barriers: Solutions cannot cross undefined regions of the differential equation

Examples:
Concrete Applications
Logistic Growth: \(\frac{dy}{dx} = y(1-y)\) has stable equilibrium at \(y = 1\)
Quadratic Equation: \(\frac{dy}{dx} = y^2 - 4\) has stable at \(y = -2\), unstable at \(y = 2\)
Cubic Equation: \(\frac{dy}{dx} = y(y-1)(y-3)\) has stable equilibrium at \(y = 1\)
Rational Equation: \(\frac{dy}{dx} = \frac{y^2-x}{y}\) has undefined line at \(y = 0\)
Important Note: Qualitative analysis using slope fields provides powerful insights without requiring explicit solutions!
Memorization Aid: Think of stable equilibria as "valleys" and unstable ones as "peaks" in the solution landscape!

Questions & Answers

Question: How do I determine if an equilibrium point is stable or unstable just by looking at the slope field?

Answer: You can determine stability by examining the direction of the slope field near the equilibrium point:

  • Stable Equilibrium: The slope field arrows point toward the equilibrium from both sides. If you imagine a solution starting slightly off the equilibrium, it will move back toward it.
  • Unstable Equilibrium: The slope field arrows point away from the equilibrium on both sides. Solutions starting near the equilibrium will move away from it.
  • Semi-stable Equilibrium: The slope field arrows point toward the equilibrium from one side and away from it on the other side.

Visually, stable equilibria look like "traps" where nearby solutions converge, while unstable equilibria look like "repellers" where nearby solutions diverge.

Question: What happens if I have a double root in my differential equation, like \((y-1)^2\) in the factorization? How does this affect stability?

Answer: Double roots (or any even multiplicity roots) in the differential equation create semi-stable equilibria. Here's why:

When you have \(\frac{dy}{dx} = (y-1)^2 \cdot g(y)\) where \(g(1) \neq 0\), the factor \((y-1)^2\) is always non-negative (positive when \(y \neq 1\)). This means the sign of \(\frac{dy}{dx}\) near \(y = 1\) depends only on the sign of \(g(y)\), not on whether \(y\) is slightly greater or less than 1.

For example, if \(\frac{dy}{dx} = (y-1)^2(y+2)\):

  • For \(y\) slightly less than 1: \(\frac{dy}{dx} = (+)(+) = +\), so solutions increase toward \(y = 1\)
  • For \(y\) slightly greater than 1: \(\frac{dy}{dx} = (+)(+) = +\), so solutions increase away from \(y = 1\)
This creates a semi-stable equilibrium where solutions approach from one side and move away from the other.

Question: How can I use slope field reasoning to predict the behavior of a real-world system modeled by a differential equation?

Answer: Slope field reasoning is extremely valuable for real-world applications:

  • Identify Equilibria: Find steady states of the system (equilibrium points)
  • Analyze Stability: Determine which steady states are physically relevant (stable equilibria)
  • Predict Outcomes: Based on initial conditions, predict long-term behavior
  • Understand Sensitivity: See how small changes in initial conditions affect outcomes
  • Identify Thresholds: Find critical values that change system behavior

For example, in population modeling, stable equilibria represent sustainable population levels, while unstable ones represent critical thresholds. In chemical reactions, equilibria represent steady-state concentrations. In economic models, equilibria represent market equilibriums or stable price levels.

The qualitative approach provides insights that don't depend on exact parameter values, making it robust for real-world scenarios where parameters might be uncertain.