\(f(x) = \begin{cases} x^2 + 1 & \text{if } x \leq 1 \\ 2x & \text{if } x > 1 \end{cases}\)
Continuity over an interval: A function is continuous on an interval if it is continuous at every point in that interval.
- Check continuity of each piece separately
- Verify continuity at boundary points where pieces meet
- Apply limit definition: \(\lim_{x \to c} f(x) = f(c)\)
\(f_1(x) = x^2 + 1\) is continuous everywhere (polynomial)
\(f_2(x) = 2x\) is continuous everywhere (linear function)
Left-hand limit: \(\lim_{x \to 1^-} f(x) = \lim_{x \to 1^-} (x^2 + 1) = 1^2 + 1 = 2\)
Right-hand limit: \(\lim_{x \to 1^+} f(x) = \lim_{x \to 1^+} 2x = 2(1) = 2\)
Function value: \(f(1) = 1^2 + 1 = 2\)
Since \(\lim_{x \to 1^-} f(x) = \lim_{x \to 1^+} f(x) = f(1) = 2\), the function is continuous at \(x = 1\)
Since both pieces are continuous and the function is continuous at the boundary point, \(f(x)\) is continuous on \([-2, 3]\).
The function is continuous over the entire interval \([-2, 3]\) because it is continuous on each piece and at the boundary point \(x = 1\).
• Polynomial continuity: Polynomials are continuous everywhere
• Continuity at boundary: Check left, right limits and function value
• Limit equality: For continuity, \(\lim_{x \to c^-} f(x) = \lim_{x \to c^+} f(x) = f(c)\)
\(f(x) = \frac{x+2}{x^2-4}\)
Rational function continuity: Continuous everywhere except where the denominator equals zero.
\(x^2 - 4 = 0\)
\(x^2 = 4\)
\(x = \pm 2\)
Function is undefined at \(x = -2\) and \(x = 2\)
These points create discontinuities
On each interval where the function is defined, it is continuous
Continuous on: \((-\infty, -2) \cup (-2, 2) \cup (2, \infty)\)
As \(x \to -2\), \(f(x) \to \pm\infty\) (vertical asymptote)
As \(x \to 2\), \(f(x) \to \pm\infty\) (vertical asymptote)
The function is continuous on \((-\infty, -2) \cup (-2, 2) \cup (2, \infty)\) and has discontinuities at \(x = -2\) and \(x = 2\).
• Rational function rule: Continuous where denominator ≠ 0
• Domain analysis: Find values that make denominator zero
• Vertical asymptotes: Indicate infinite discontinuities
Trigonometric function continuity: \(\tan(x) = \frac{\sin(x)}{\cos(x)}\) is continuous where \(\cos(x) \neq 0\).
\(\tan(x) = \frac{\sin(x)}{\cos(x)}\)
\(\cos(x) = 0\)
On \([0, \pi]\), \(\cos(x) = 0\) when \(x = \frac{\pi}{2}\)
\(\sin(x)\) and \(\cos(x)\) are continuous everywhere
\(\tan(x)\) is continuous where \(\cos(x) \neq 0\)
\(\tan(x)\) is discontinuous at \(x = \frac{\pi}{2}\)
Therefore, \(\tan(x)\) is not continuous on \([0, \pi]\)
The function \(\tan(x)\) is not continuous on \([0, \pi]\) because it has a discontinuity at \(x = \frac{\pi}{2}\) where \(\cos(x) = 0\).
• Trigonometric continuity: \(\tan(x)\) continuous where \(\cos(x) \neq 0\)
• Quotient rule: \(\frac{f(x)}{g(x)}\) continuous where \(g(x) \neq 0\)
• Periodic functions: Check for periodic discontinuities
Continuity at a point: \(\lim_{x \to c} f(x) = f(c)\)
Continuity over interval: Continuous at every point in the interval
Types of discontinuities: Removable, jump, infinite, oscillating
- Identify function type: Polynomial, rational, trigonometric, piecewise
- Find potential discontinuities: Division by zero, piece boundaries
- Check continuity conditions: Limit exists and equals function value
- State intervals of continuity: Where function is continuous
• Continuity condition: \(\lim_{x \to c} f(x) = f(c)\)
• Polynomial functions: Continuous everywhere
• Rational functions: Continuous where denominator ≠ 0
• Trigonometric functions: \(\sin(x), \cos(x)\) continuous everywhere; \(\tan(x)\) continuous where \(\cos(x) \neq 0\)
• Piecewise functions: Check continuity at boundary points
Composite function continuity: For \(f(g(x))\), if \(g\) is continuous at \(c\) and \(f\) is continuous at \(g(c)\), then \(f(g(x))\) is continuous at \(c\).
\(\sqrt{x^2 - 4}\) requires \(x^2 - 4 \geq 0\)
\(x^2 \geq 4\)
\(|x| \geq 2\), so \(x \leq -2\) or \(x \geq 2\)
Since \([2, 5] \subset [2, \infty)\), all points in the interval satisfy \(x^2 - 4 \geq 0\)
\(g(x) = x^2 - 4\) is continuous everywhere (polynomial)
\(f(u) = \sqrt{u}\) is continuous for \(u \geq 0\)
Since \(g(x) \geq 0\) on \([2, 5]\), \(f(g(x))\) is continuous on \([2, 5]\)
At \(x = 2\): \(f(2) = \sqrt{4-4} = 0\)
At \(x = 5\): \(f(5) = \sqrt{25-4} = \sqrt{21}\)
The function \(f(x) = \sqrt{x^2 - 4}\) is continuous on \([2, 5]\) because the inner function is continuous and non-negative throughout the interval.
• Composition continuity: Continuous functions composed yield continuous result
• Domain restriction: Must satisfy domain requirements
• Square root continuity: Continuous where argument ≥ 0
Intermediate Value Theorem: If \(f\) is continuous on \([a, b]\) and \(N\) is any number between \(f(a)\) and \(f(b)\), then there exists \(c \in (a, b)\) such that \(f(c) = N\).
\(f(x) = x^3 - 2x + 1\) is a polynomial, therefore continuous everywhere
\(f(0) = 0^3 - 2(0) + 1 = 1\)
\(f(2) = 2^3 - 2(2) + 1 = 8 - 4 + 1 = 5\)
We want to find \(c\) such that \(f(c) = 0\)
Since \(f(0) = 1 > 0\) and \(f(2) = 5 > 0\), we need to find another point
Let's try \(f(1) = 1^3 - 2(1) + 1 = 0\)
Actually, let's consider \([0, 1]\): \(f(0) = 1\), \(f(1) = 0\)
Since \(f(1) = 0\), we've found our root: \(c = 1\)
Let's try \(f(0.5) = (0.5)^3 - 2(0.5) + 1 = 0.125 - 1 + 1 = 0.125 > 0\)
Try \(f(-1) = (-1)^3 - 2(-1) + 1 = -1 + 2 + 1 = 2 > 0\)
We need a negative value. Let's reconsider the problem.
Since \(f(1) = 1^3 - 2(1) + 1 = 0\), there exists \(c = 1 \in [0, 2]\) such that \(f(c) = 0\). This confirms the Intermediate Value Theorem.
• Polynomial continuity: All polynomials are continuous
• Intermediate Value Theorem: If \(f\) is continuous and changes sign, there's a root
• Root finding: Direct evaluation can find exact roots
Continuity at a point: A function \(f\) is continuous at point \(c\) if \(\lim_{x \to c} f(x) = f(c)\)
Continuity over an interval: A function is continuous over an interval if it is continuous at every point in that interval
Types of discontinuities: Removable (hole), Jump (finite difference), Infinite (asymptote), Oscillating (no limit)
- Identify function type: Polynomial, rational, trigonometric, exponential, logarithmic, piecewise
- Find potential discontinuities: Points where function is undefined or has jumps
- Check continuity conditions: Verify limit exists and equals function value
- Determine intervals: State where function is continuous
• Basic functions: Polynomials, sine, cosine are continuous everywhere
• Rational functions: Continuous where denominator ≠ 0
• Trigonometric: \(\tan(x)\), \(\sec(x)\) continuous where defined
• Composition: If \(g\) continuous at \(c\) and \(f\) continuous at \(g(c)\), then \(f \circ g\) continuous at \(c\)
• Intermediate Value Theorem: If \(f\) continuous on \([a,b]\) and \(N\) between \(f(a)\) and \(f(b)\), then exists \(c\) s.t. \(f(c)=N\)
\(f_1(x) = \frac{1}{x-2}\)
\(f_2(x) = \begin{cases} x^2 & x < 1 \\ 2x-1 & x \geq 1 \end{cases}\)
\(f_3(x) = \sin(x)\)
Analysis: The chart illustrates different types of continuity behaviors:
- \(f_1(x) = \frac{1}{x-2}\): Discontinuous at \(x = 2\) (infinite discontinuity)
- \(f_2(x)\): May have discontinuity at \(x = 1\) (piecewise function)
- \(f_3(x) = \sin(x)\): Continuous everywhere