\(\lim_{x \to 3} (x^2 - 2x + 1)\)
Direct Substitution: The process of evaluating a limit by substituting the value directly into the function
Polynomial Continuity: Polynomials are continuous everywhere, so direct substitution always works
- Check if the function is continuous at the point
- Substitute the value directly into the function
- Perform the arithmetic operations
- Simplify to get the result
The function \(f(x) = x^2 - 2x + 1\) is a polynomial, which is continuous everywhere
\(\lim_{x \to 3} (x^2 - 2x + 1) = 3^2 - 2(3) + 1\)
\(3^2 = 9\), \(-2(3) = -6\), \(+1 = 1\)
\(9 - 6 + 1 = 4\)
Since polynomials are continuous, the limit equals the function value at the point
\(\lim_{x \to 3} (x^2 - 2x + 1) = 4\)
• Direct Substitution: For continuous functions at the limit point
• Polynomial Continuity: Polynomials are continuous everywhere
• Arithmetic: Basic algebraic operations
\(\lim_{x \to 2} \frac{x^2 + 1}{x - 1}\)
Rational Function: A function that is the ratio of two polynomials
Continuity Condition: A rational function is continuous wherever the denominator is not zero
Denominator: \(2 - 1 = 1 \neq 0\), so the function is continuous at x = 2
\(\lim_{x \to 2} \frac{x^2 + 1}{x - 1} = \frac{2^2 + 1}{2 - 1}\)
\(2^2 + 1 = 4 + 1 = 5\)
\(2 - 1 = 1\)
\(\frac{5}{1} = 5\)
\(\lim_{x \to 2} \frac{x^2 + 1}{x - 1} = 5\)
• Direct Substitution: For continuous functions at the limit point
• Rational Function Rule: Continuous where denominator ≠ 0
• Arithmetic: Division of real numbers
\(\lim_{x \to 0} \cos(x)\)
Trigonometric Continuity: Sine and cosine functions are continuous everywhere
Basic Trig Values: \(\cos(0) = 1\), \(\sin(0) = 0\)
The cosine function is continuous everywhere, including at x = 0
\(\lim_{x \to 0} \cos(x) = \cos(0)\)
\(\cos(0) = 1\)
Since cosine is continuous at 0, the limit equals the function value
From the unit circle, \(\cos(0) = 1\) is a fundamental trigonometric value
\(\lim_{x \to 0} \cos(x) = 1\)
• Direct Substitution: For continuous functions at the limit point
• Trigonometric Continuity: Cosine is continuous everywhere
• Basic Trig Value: \(\cos(0) = 1\)
Direct Substitution: The process of evaluating a limit by substituting the value directly into the function, yielding \(\lim_{x \to a} f(x) = f(a)\)
Continuity: A function is continuous at x = a if \(\lim_{x \to a} f(x) = f(a)\)
Domain: The set of all input values for which the function is defined
Continuity Condition: Direct substitution works when the function is continuous at the limit point
- Check domain: Verify the function is defined at the point
- Check continuity: Ensure the function is continuous at the point
- Substitute: Replace x with the limit value
- Calculate: Perform the arithmetic operations
- Verify: Check that the result makes sense
• Continuity Rule: \(\lim_{x \to a} f(x) = f(a)\) when f is continuous at x = a
• Polynomial Rule: All polynomials are continuous everywhere
• Rational Rule: \(\frac{P(x)}{Q(x)}\) is continuous where \(Q(x) \neq 0\)
• Trigonometric Rule: sin(x), cos(x) are continuous everywhere
\(f_1(x) = x^2 - 2x + 1\), \(f_2(x) = \frac{x^2 + 1}{x - 1}\), \(f_3(x) = \cos(x)\)
Analysis: The chart shows how different functions behave at their limit points.
- \(f_1(x) = x^2 - 2x + 1\): Polynomial, continuous everywhere
- \(f_2(x) = \frac{x^2 + 1}{x - 1}\): Rational, continuous except at x=1
- \(f_3(x) = \cos(x)\): Trigonometric, continuous everywhere
\(\lim_{x \to 4} \sqrt{x + 5}\)
Radical Continuity: \(\sqrt{f(x)}\) is continuous where f(x) ≥ 0 and f is continuous
Domain Condition: The expression under the radical must be non-negative
For \(\sqrt{x + 5}\) to be defined: \(x + 5 \geq 0\), so \(x \geq -5\)
Since \(4 \geq -5\), the function is defined at x = 4
Since x + 5 > 0 at x = 4, the square root function is continuous at x = 4
\(\lim_{x \to 4} \sqrt{x + 5} = \sqrt{4 + 5}\)
\(4 + 5 = 9\)
\(\sqrt{9} = 3\)
\(\lim_{x \to 4} \sqrt{x + 5} = 3\)
• Direct Substitution: For continuous functions at the limit point
• Radical Continuity: Continuous where expression under radical ≥ 0
• Square Root: \(\sqrt{9} = 3\)
\(\lim_{x \to 1} \frac{x^2 - 1}{x - 1}\)
Indeterminate Form: An expression like \(\frac{0}{0}\) that cannot be evaluated directly
Undefined Expression: When the function is not defined at the limit point
At x = 1: numerator = \(1^2 - 1 = 0\), denominator = \(1 - 1 = 0\)
This gives \(\frac{0}{0}\) form, which is undefined
The function is undefined at x = 1 because the denominator is 0
Direct substitution only works when the function is continuous at the point
Factor and simplify: \(\frac{x^2 - 1}{x - 1} = \frac{(x-1)(x+1)}{x-1} = x+1\) (for x ≠ 1)
\(\lim_{x \to 1} \frac{x^2 - 1}{x - 1} = \lim_{x \to 1} (x+1) = 2\)
Direct substitution fails because the function is not continuous at x = 1
Direct substitution fails because the function is undefined at x = 1, giving the indeterminate form \(\frac{0}{0}\)
• Direct Substitution Failure: Occurs when function is undefined at the limit point
• Indeterminate Forms: \(\frac{0}{0}\), \(\frac{\infty}{\infty}\), etc. require special techniques
• Factoring: Can resolve indeterminate forms in rational functions
Direct Substitution: The method of evaluating limits by substituting the limit value directly into the function
Continuity: A function f is continuous at x = a if \(\lim_{x \to a} f(x) = f(a)\)
Domain: The set of all x-values for which f(x) is defined
Continuity Condition: Direct substitution works if and only if the function is continuous at the limit point
- Domain Check: Verify the function is defined at x = a
- Continuity Check: Verify the function is continuous at x = a
- Substitution: Replace x with a in f(x)
- Arithmetic: Perform the necessary calculations
- Verification: Ensure the result is mathematically valid
• Continuity Rule: \(\lim_{x \to a} f(x) = f(a)\) when f is continuous at x = a
• Polynomial Rule: All polynomials are continuous everywhere
• Rational Rule: \(\frac{P(x)}{Q(x)}\) is continuous where \(Q(x) \neq 0\)
• Trigonometric Rule: sin(x), cos(x) are continuous everywhere
• Radical Rule: \(\sqrt{f(x)}\) is continuous where f(x) ≥ 0 and f is continuous
• Exponential Rule: \(e^x\) and \(a^x\) (a > 0) are continuous everywhere
\(f_1(x) = x^2 - 2x + 1\), \(f_2(x) = \frac{x^2 + 1}{x - 1}\), \(f_3(x) = \cos(x)\)
Analysis: The chart shows how different functions behave at their limit points.
- \(f_1(x) = x^2 - 2x + 1\): Polynomial, continuous everywhere
- \(f_2(x) = \frac{x^2 + 1}{x - 1}\): Rational, continuous except at x=1
- \(f_3(x) = \cos(x)\): Trigonometric, continuous everywhere