Solved Exercises on Limits Introduction in Calculus 1

Master limits introduction: intuitive understanding, basic evaluation, graphical interpretation, limit properties through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Direct Substitution
Exercise 1
Evaluate:
\(\lim_{x \to 2} (x^2 + 3x - 1)\)
Definition:

Limit: The value that a function approaches as the input approaches some value

Direct Substitution: When \(f(x)\) is continuous at \(x = a\), then \(\lim_{x \to a} f(x) = f(a)\)

Direct Substitution Method:
  1. Check if the function is defined at the point
  2. Verify continuity at that point
  3. Substitute the value directly
  4. Simplify the result
Function
\(f(x) = x^2 + 3x - 1\)
Point
\(x \to 2\)
Step 1: Check function definition

The function \(f(x) = x^2 + 3x - 1\) is a polynomial, which is defined and continuous everywhere

Step 2: Apply direct substitution

\(\lim_{x \to 2} (x^2 + 3x - 1) = 2^2 + 3(2) - 1\)

Step 3: Calculate

\(= 4 + 6 - 1 = 9\)

Step 4: Verify continuity

Since polynomials are continuous everywhere, direct substitution is valid

\(\lim_{x \to 2} (x^2 + 3x - 1) = 9\)
Final answer:

\(\lim_{x \to 2} (x^2 + 3x - 1) = 9\)

Applied rules:

• Direct Substitution: For continuous functions at the limit point

• Polynomial Continuity: Polynomials are continuous everywhere

• Arithmetic: Basic algebraic operations

2 Rational Function Limit
Exercise 2
Evaluate:
\(\lim_{x \to 3} \frac{x^2 - 9}{x - 3}\)
Definition:

Rational Function: A function that is the ratio of two polynomials

Indeterminate Form: Expression like \(\frac{0}{0}\) requires factoring to resolve

Function
\(f(x) = \frac{x^2 - 9}{x - 3}\)
Point
\(x \to 3\)
Step 1: Check direct substitution

At \(x = 3\): numerator = \(9 - 9 = 0\), denominator = \(3 - 3 = 0\)

This gives \(\frac{0}{0}\) indeterminate form

Step 2: Factor the numerator

\(x^2 - 9 = (x+3)(x-3)\) (difference of squares)

Step 3: Simplify the expression

\(\frac{x^2 - 9}{x - 3} = \frac{(x+3)(x-3)}{x-3} = x+3\) (for \(x \neq 3\))

Step 4: Apply limit to simplified expression

\(\lim_{x \to 3} \frac{x^2 - 9}{x - 3} = \lim_{x \to 3} (x+3)\)

Step 5: Use direct substitution

\(\lim_{x \to 3} (x+3) = 3 + 3 = 6\)

\(\lim_{x \to 3} \frac{x^2 - 9}{x - 3} = 6\)
Final answer:

\(\lim_{x \to 3} \frac{x^2 - 9}{x - 3} = 6\)

Applied rules:

• Factoring: Difference of squares \(a^2 - b^2 = (a+b)(a-b)\)

• Canceling: Cancel common factors (valid when \(x \neq 3\))

• Direct Substitution: After simplification

3 Limit at Infinity
Exercise 3
Evaluate:
\(\lim_{x \to \infty} \frac{2x^2 + 3x - 1}{x^2 + 5}\)
Definition:

Limit at Infinity: Behavior of function as input grows without bound

Leading Term Dominance: For rational functions, leading terms determine the limit

Function
\(f(x) = \frac{2x^2 + 3x - 1}{x^2 + 5}\)
Point
\(x \to \infty\)
Step 1: Identify degrees of numerator and denominator

Numerator degree: 2 (from \(2x^2\)), Denominator degree: 2 (from \(x^2\))

Step 2: Divide both numerator and denominator by highest power

Divide by \(x^2\): \(\frac{2x^2 + 3x - 1}{x^2 + 5} = \frac{\frac{2x^2}{x^2} + \frac{3x}{x^2} - \frac{1}{x^2}}{\frac{x^2}{x^2} + \frac{5}{x^2}} = \frac{2 + \frac{3}{x} - \frac{1}{x^2}}{1 + \frac{5}{x^2}}\)

Step 3: Apply limit to each term

As \(x \to \infty\): \(\frac{3}{x} \to 0\), \(\frac{1}{x^2} \to 0\), \(\frac{5}{x^2} \to 0\)

Step 4: Calculate the limit

\(\lim_{x \to \infty} \frac{2 + \frac{3}{x} - \frac{1}{x^2}}{1 + \frac{5}{x^2}} = \frac{2 + 0 - 0}{1 + 0} = \frac{2}{1} = 2\)

Step 5: Apply the rule

When degrees are equal, limit equals ratio of leading coefficients

\(\lim_{x \to \infty} \frac{2x^2 + 3x - 1}{x^2 + 5} = 2\)
Final answer:

\(\lim_{x \to \infty} \frac{2x^2 + 3x - 1}{x^2 + 5} = 2\)

Applied rules:

• Infinity Rules: \(\lim_{x \to \infty} \frac{1}{x^n} = 0\) for \(n > 0\)

• Rational Function Rule: Equal degrees → ratio of leading coefficients

• Division by Leading Term: Technique to simplify limits at infinity

Limit Properties and Techniques
\(\lim_{x \to a} f(x) = L\)
Limit Definition
Sum Rule
\(\lim(f+g) = \lim f + \lim g\)
Addition
Product Rule
\(\lim(f \cdot g) = \lim f \cdot \lim g\)
Multiplication
Quotient Rule
\(\lim(\frac{f}{g}) = \frac{\lim f}{\lim g}\)
Division
Key definitions:

Limit: The value that a function approaches as the input approaches some value, denoted \(\lim_{x \to a} f(x) = L\)

Continuity: A function is continuous at \(x = a\) if \(\lim_{x \to a} f(x) = f(a)\)

One-sided Limits: \(\lim_{x \to a^-} f(x)\) (from left) and \(\lim_{x \to a^+} f(x)\) (from right)

Indeterminate Forms: Expressions like \(\frac{0}{0}\), \(\frac{\infty}{\infty}\), \(\infty - \infty\), etc.

Complete methodology:
  1. Direct Substitution: Try plugging in the value first
  2. Check Indeterminate Form: If you get \(\frac{0}{0}\) or similar, factor/simplify
  3. Factoring: Factor polynomials to cancel common terms
  4. Rationalizing: For radicals, multiply by conjugate
  5. Special Techniques: For trigonometric, exponential, or complex functions
Tip 1: Always try direct substitution first before other methods.
Tip 2: For \(\frac{0}{0}\) form, factor and cancel common terms.
Tip 3: For limits at infinity, divide by the highest power.
Tip 4: A function can have a limit at a point even if it's not defined there.
Common errors: Forgetting to check for indeterminate forms, cancelling terms incorrectly, not considering domain restrictions.
Exam preparation: Memorize basic limit properties, practice factoring, master special cases like \(\frac{0}{0}\).
Essential Properties:

• Sum Rule: \(\lim_{x \to a} [f(x) + g(x)] = \lim_{x \to a} f(x) + \lim_{x \to a} g(x)\)

• Product Rule: \(\lim_{x \to a} [f(x) \cdot g(x)] = \lim_{x \to a} f(x) \cdot \lim_{x \to a} g(x)\)

• Constant Multiple: \(\lim_{x \to a} [c \cdot f(x)] = c \cdot \lim_{x \to a} f(x)\)

• Quotient Rule: \(\lim_{x \to a} \frac{f(x)}{g(x)} = \frac{\lim_{x \to a} f(x)}{\lim_{x \to a} g(x)}\) (if \(\lim_{x \to a} g(x) \neq 0\))

Exercise with Visualization: Limit Behavior
Exercise 6: Function Approaches
Analyze limit behavior of functions:
\(f_1(x) = x^2 + 3x - 1\) as \(x \to 2\)
\(f_2(x) = \frac{x^2 - 9}{x - 3}\) as \(x \to 3\)
\(f_3(x) = \frac{2x^2 + 3x - 1}{x^2 + 5}\) as \(x \to \infty\)

Analysis: The chart shows how functions approach their respective limits.

  • \(f_1(x)\): Approaches 9 as x approaches 2
  • \(f_2(x)\): Approaches 6 despite being undefined at x=3
  • \(f_3(x)\): Approaches 2 as x grows without bound
Solution: Exercises 4 to 5
4 One-Sided Limits
Exercise 4
Evaluate:
\(\lim_{x \to 0^-} \frac{|x|}{x}\) and \(\lim_{x \to 0^+} \frac{|x|}{x}\)
Definition:

Absolute Value: \(|x| = x\) if \(x \geq 0\), \(|x| = -x\) if \(x < 0\)

One-sided Limits: Limits approached from one direction only

Function
\(f(x) = \frac{|x|}{x}\)
Point
\(x \to 0\)
Step 1: Analyze left-hand limit (\(x \to 0^-\))

When \(x < 0\): \(|x| = -x\), so \(\frac{|x|}{x} = \frac{-x}{x} = -1\)

Step 2: Calculate left-hand limit

\(\lim_{x \to 0^-} \frac{|x|}{x} = \lim_{x \to 0^-} (-1) = -1\)

Step 3: Analyze right-hand limit (\(x \to 0^+\))

When \(x > 0\): \(|x| = x\), so \(\frac{|x|}{x} = \frac{x}{x} = 1\)

Step 4: Calculate right-hand limit

\(\lim_{x \to 0^+} \frac{|x|}{x} = \lim_{x \to 0^+} (1) = 1\)

Step 5: Compare one-sided limits

Since \(\lim_{x \to 0^-} \frac{|x|}{x} \neq \lim_{x \to 0^+} \frac{|x|}{x}\), the two-sided limit does not exist

\(\lim_{x \to 0^-} \frac{|x|}{x} = -1\), \(\lim_{x \to 0^+} \frac{|x|}{x} = 1\)
Final answer:

\(\lim_{x \to 0^-} \frac{|x|}{x} = -1\) and \(\lim_{x \to 0^+} \frac{|x|}{x} = 1\), so \(\lim_{x \to 0} \frac{|x|}{x}\) does not exist

Applied rules:

• Absolute Value Definition: Split into cases based on sign

• One-sided Limits: Approach from left or right separately

• Existence Condition: Two-sided limit exists only if both one-sided limits exist and are equal

5 Radical Function Limit
Exercise 5
Evaluate:
\(\lim_{x \to 4} \frac{\sqrt{x} - 2}{x - 4}\)
Definition:

Rationalization: Multiply by conjugate to eliminate radicals

Conjugate: For \(\sqrt{a} - b\), the conjugate is \(\sqrt{a} + b\)

Function
\(f(x) = \frac{\sqrt{x} - 2}{x - 4}\)
Point
\(x \to 4\)
Step 1: Check direct substitution

At \(x = 4\): numerator = \(\sqrt{4} - 2 = 2 - 2 = 0\), denominator = \(4 - 4 = 0\)

This gives \(\frac{0}{0}\) indeterminate form

Step 2: Rationalize the numerator

Multiply by conjugate: \(\frac{\sqrt{x} - 2}{x - 4} \cdot \frac{\sqrt{x} + 2}{\sqrt{x} + 2}\)

Step 3: Simplify the numerator

\((\sqrt{x} - 2)(\sqrt{x} + 2) = (\sqrt{x})^2 - 2^2 = x - 4\)

Step 4: Simplify the entire expression

\(\frac{\sqrt{x} - 2}{x - 4} \cdot \frac{\sqrt{x} + 2}{\sqrt{x} + 2} = \frac{x - 4}{(x - 4)(\sqrt{x} + 2)} = \frac{1}{\sqrt{x} + 2}\) (for \(x \neq 4\))

Step 5: Apply the limit

\(\lim_{x \to 4} \frac{\sqrt{x} - 2}{x - 4} = \lim_{x \to 4} \frac{1}{\sqrt{x} + 2} = \frac{1}{\sqrt{4} + 2} = \frac{1}{4}\)

\(\lim_{x \to 4} \frac{\sqrt{x} - 2}{x - 4} = \frac{1}{4}\)
Final answer:

\(\lim_{x \to 4} \frac{\sqrt{x} - 2}{x - 4} = \frac{1}{4}\)

Applied rules:

• Rationalization: Multiply by conjugate to eliminate radicals

• Difference of Squares: \((a-b)(a+b) = a^2 - b^2\)

• Direct Substitution: After simplification

Comprehensive Theory: Limits Introduction
\(\lim_{x \to a} f(x) = L\)
Limit Definition
Key definitions:

Limit: The value that a function approaches as the input approaches some value, denoted \(\lim_{x \to a} f(x) = L\)

Intuitive Understanding: We say \(\lim_{x \to a} f(x) = L\) if we can make \(f(x)\) as close to \(L\) as we want by taking \(x\) sufficiently close to \(a\)

Continuity: A function is continuous at \(x = a\) if \(\lim_{x \to a} f(x) = f(a)\)

One-sided Limits: \(\lim_{x \to a^-} f(x)\) (approach from left) and \(\lim_{x \to a^+} f(x)\) (approach from right)

Complete methodology:
  1. Direct Substitution: Try plugging in the value if function is continuous
  2. Factoring: For rational functions with \(\frac{0}{0}\) form, factor and cancel
  3. Rationalization: For radical expressions, multiply by conjugate
  4. Special Limits: Use known special limits or theorems
  5. Graphical Approach: Examine the graph behavior near the point
  6. One-sided Analysis: For piecewise functions or absolute values
Tip 1: Always check direct substitution first - it's the simplest method.
Tip 2: For \(\frac{0}{0}\) indeterminate form, factor polynomials or rationalize.
Tip 3: A limit exists only if both one-sided limits exist and are equal.
Tip 4: The function value at the point doesn't affect the limit.
Tip 5: For limits at infinity, focus on the highest degree terms.
Common errors: Forgetting to check for indeterminate forms, cancelling terms incorrectly, not considering domain restrictions, confusing function value with limit value.
Key insights: Limits describe behavior near a point, not necessarily at the point itself. The function doesn't need to be defined at the limit point.
Essential Properties:

• Sum Rule: \(\lim_{x \to a} [f(x) + g(x)] = \lim_{x \to a} f(x) + \lim_{x \to a} g(x)\)

• Product Rule: \(\lim_{x \to a} [f(x) \cdot g(x)] = \lim_{x \to a} f(x) \cdot \lim_{x \to a} g(x)\)

• Constant Multiple: \(\lim_{x \to a} [c \cdot f(x)] = c \cdot \lim_{x \to a} f(x)\)

• Quotient Rule: \(\lim_{x \to a} \frac{f(x)}{g(x)} = \frac{\lim_{x \to a} f(x)}{\lim_{x \to a} g(x)}\) (if \(\lim_{x \to a} g(x) \neq 0\))

• Power Rule: \(\lim_{x \to a} [f(x)]^n = [\lim_{x \to a} f(x)]^n\)

Exercise with Visualization: Limit Behavior
Exercise 6: Function Approaches
Analyze limit behavior of functions:
\(f_1(x) = x^2 + 3x - 1\) as \(x \to 2\)
\(f_2(x) = \frac{x^2 - 9}{x - 3}\) as \(x \to 3\)
\(f_3(x) = \frac{2x^2 + 3x - 1}{x^2 + 5}\) as \(x \to \infty\)

Analysis: The chart shows how functions approach their respective limits.

  • \(f_1(x)\): Approaches 9 as x approaches 2
  • \(f_2(x)\): Approaches 6 despite being undefined at x=3
  • \(f_3(x)\): Approaches 2 as x grows without bound

Questions & Answers

Question: I'm confused about the difference between the value of a function at a point and the limit of a function at that point. Can you explain?

Answer: This is a fundamental concept! The key difference is:

  • Function value f(a): The actual output when you plug in x = a
  • Limit lim_{x→a} f(x): The value that f(x) approaches as x gets arbitrarily close to a

They can be different! For example, consider f(x) = (x² - 9)/(x - 3). At x = 3, f(3) is undefined (division by zero), but lim_{x→3} f(x) = 6. The limit describes the trend, not the actual value.

A function is continuous at x = a when f(a) = lim_{x→a} f(x), meaning the function value equals the limit value.

Question: When I get 0/0 after direct substitution, how do I know which method to use next?

Answer: Here's a systematic approach for \(\frac{0}{0}\) indeterminate forms:

  1. Rational functions: Factor both numerator and denominator, then cancel common factors
  2. Radicals: Multiply numerator and denominator by the conjugate
  3. Trigonometric: Use special trigonometric limits or identities
  4. Complex expressions: Try algebraic manipulation or substitution

For polynomials like \(\frac{x^2 - 9}{x - 3}\), factoring works perfectly. For \(\frac{\sqrt{x} - 2}{x - 4}\), rationalization is the way to go. The form of the expression usually suggests the method.

Question: Why do we need to study limits? What's the practical purpose?

Answer: Limits are foundational to calculus and have numerous practical applications:

  • Derivatives: The definition of derivative uses limits: f'(x) = lim_{h→0} [f(x+h) - f(x)]/h
  • Physics: Instantaneous velocity, acceleration, and other rates of change
  • Engineering: Modeling systems approaching steady state
  • Economics: Marginal cost, revenue, and profit analysis
  • Computer Science: Algorithm analysis and convergence of numerical methods

Limits allow us to rigorously define concepts like "approaching" or "tending toward," which are essential for understanding continuous phenomena in the real world.