Solved Exercises on One-Sided Limits in Calculus 1

Master one-sided limits: left-hand limits, right-hand limits, piecewise functions, jump discontinuities through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Left-Hand Limit
Exercise 1
Find the left-hand limit:
\(\lim_{x \to 2^-} (x + 1)\)
Definition:

Left-Hand Limit: The value that f(x) approaches as x approaches a from values less than a, denoted \(\lim_{x \to a^-} f(x)\)

Approach from Left: x takes values that are slightly less than the target value

Left-Hand Limit Method:
  1. Consider values of x that are less than the target value
  2. Substitute these values into the function
  3. Observe the trend as x gets closer to the target
  4. Identify the value being approached
Function
\(f(x) = x + 1\)
Target
\(x \to 2^-\)
Step 1: Consider values approaching 2 from the left

Take x values like: 1.9, 1.99, 1.999, 1.9999, ...

Step 2: Calculate function values

When x = 1.9: f(1.9) = 1.9 + 1 = 2.9

When x = 1.99: f(1.99) = 1.99 + 1 = 2.99

When x = 1.999: f(1.999) = 1.999 + 1 = 2.999

Step 3: Observe the pattern

As x approaches 2 from the left, f(x) approaches 3

1.9 → 2.9, 1.99 → 2.99, 1.999 → 2.999, ...

Step 4: Since f(x) = x + 1 is continuous

For continuous functions, the left-hand limit equals the function value at the point

\(\lim_{x \to 2^-} (x + 1) = 2 + 1 = 3\)

Step 5: Verify with direct substitution

Since x + 1 is linear and continuous everywhere, \(\lim_{x \to 2^-} (x + 1) = 3\)

\(\lim_{x \to 2^-} (x + 1) = 3\)
Final answer:

\(\lim_{x \to 2^-} (x + 1) = 3\)

Applied rules:

• Left-Hand Limit: \(\lim_{x \to a^-} f(x)\) considers x < a

• Continuity Property: For continuous functions, left-hand limit equals function value

• Linear Function: f(x) = x + 1 is continuous everywhere

2 Right-Hand Limit
Exercise 2
Find the right-hand limit:
\(\lim_{x \to 0^+} \frac{|x|}{x}\)
Definition:

Right-Hand Limit: The value that f(x) approaches as x approaches a from values greater than a, denoted \(\lim_{x \to a^+} f(x)\)

Absolute Value: \(|x| = x\) when \(x \geq 0\), \(|x| = -x\) when \(x < 0\)

Function
\(f(x) = \frac{|x|}{x}\)
Target
\(x \to 0^+\)
Step 1: Consider the domain for right-hand approach

Since we're approaching from the right (x → 0⁺), we have x > 0

Step 2: Simplify the function for x > 0

When x > 0, |x| = x, so: \(\frac{|x|}{x} = \frac{x}{x} = 1\)

Step 3: Apply the limit

Since f(x) = 1 for all x > 0, we have:

\(\lim_{x \to 0^+} \frac{|x|}{x} = \lim_{x \to 0^+} 1 = 1\)

Step 4: Verify with specific values

When x = 0.1: f(0.1) = |0.1|/0.1 = 0.1/0.1 = 1

When x = 0.01: f(0.01) = |0.01|/0.01 = 0.01/0.01 = 1

When x = 0.001: f(0.001) = |0.001|/0.001 = 0.001/0.001 = 1

Step 5: Confirm the pattern

For all positive values of x, f(x) = 1, so the limit is 1

\(\lim_{x \to 0^+} \frac{|x|}{x} = 1\)
Final answer:

\(\lim_{x \to 0^+} \frac{|x|}{x} = 1\)

Applied rules:

• Right-Hand Limit: \(\lim_{x \to a^+} f(x)\) considers x > a

• Absolute Value Definition: |x| = x when x ≥ 0

• Constant Function: Limit of a constant is the constant itself

3 Comparing One-Sided Limits
Exercise 3
Compare the one-sided limits for:
\(\lim_{x \to 0^-} \frac{|x|}{x}\) and \(\lim_{x \to 0^+} \frac{|x|}{x}\)
Definition:

Jump Discontinuity: When left-hand and right-hand limits exist but are not equal

Two-Sided Limit Existence: \(\lim_{x \to a} f(x)\) exists if and only if both one-sided limits exist and are equal

Left Limit
\(\lim_{x \to 0^-} \frac{|x|}{x}\)
Right Limit
\(\lim_{x \to 0^+} \frac{|x|}{x}\)
Step 1: Find the left-hand limit

For x → 0⁻, we have x < 0, so |x| = -x

\(\lim_{x \to 0^-} \frac{|x|}{x} = \lim_{x \to 0^-} \frac{-x}{x} = \lim_{x \to 0^-} (-1) = -1\)

Step 2: Recall the right-hand limit

From Exercise 2: \(\lim_{x \to 0^+} \frac{|x|}{x} = 1\)

Step 3: Compare the one-sided limits

Left-hand limit: -1

Right-hand limit: 1

Since -1 ≠ 1, the one-sided limits are different

Step 4: Determine if two-sided limit exists

Since the left-hand and right-hand limits are not equal, the two-sided limit does not exist

\(\lim_{x \to 0} \frac{|x|}{x}\) does not exist

Step 5: Classify the discontinuity

This is a jump discontinuity since both one-sided limits exist but are not equal

\(\lim_{x \to 0^-} \frac{|x|}{x} = -1\), \(\lim_{x \to 0^+} \frac{|x|}{x} = 1\)
Final answer:

\(\lim_{x \to 0^-} \frac{|x|}{x} = -1\), \(\lim_{x \to 0^+} \frac{|x|}{x} = 1\), so \(\lim_{x \to 0} \frac{|x|}{x}\) does not exist

Applied rules:

• Limit Existence: Two-sided limit exists iff both one-sided limits exist and are equal

• Absolute Value Definition: |x| = -x when x < 0

• Jump Discontinuity: Different one-sided limits create a jump

One-Sided Limit Properties
\(\lim_{x \to a^-} f(x) \neq \lim_{x \to a^+} f(x)\)
Jump Discontinuity
Left Limit
\(\lim_{x \to a^-} f(x)\)
x < a
Right Limit
\(\lim_{x \to a^+} f(x)\)
x > a
Two-Sided
\(\lim_{x \to a} f(x)\)
Exists if equal
Key definitions:

Left-Hand Limit: \(\lim_{x \to a^-} f(x) = L\) means f(x) approaches L as x approaches a from values less than a

Right-Hand Limit: \(\lim_{x \to a^+} f(x) = L\) means f(x) approaches L as x approaches a from values greater than a

Two-Sided Limit: \(\lim_{x \to a} f(x) = L\) exists if and only if both one-sided limits exist and equal L

Jump Discontinuity: When left-hand and right-hand limits exist but are not equal

Complete methodology:
  1. Identify the approach: Determine if approaching from left (x → a⁻) or right (x → a⁺)
  2. Consider the domain: For x < a or x > a as appropriate
  3. Simplify the function: If necessary, based on the domain restriction
  4. Calculate the limit: Using appropriate techniques for the simplified function
  5. Compare results: If examining both sides, compare the one-sided limits
Tip 1: For piecewise functions, use the correct piece for each one-sided limit.
Tip 2: When x → a⁻, consider values like a - 0.1, a - 0.01, a - 0.001, etc.
Tip 3: When x → a⁺, consider values like a + 0.1, a + 0.01, a + 0.001, etc.
Tip 4: If one-sided limits are equal, the two-sided limit exists and equals that value.
Common errors: Confusing left and right approaches, not considering domain restrictions, forgetting that two-sided limit requires both one-sided limits to be equal.
Exam preparation: Practice with absolute value functions, piecewise functions, and rational functions with discontinuities.
Essential Rules:

• Limit Existence: \(\lim_{x \to a} f(x) = L\) if and only if \(\lim_{x \to a^-} f(x) = \lim_{x \to a^+} f(x) = L\)

• Left Approach: \(\lim_{x \to a^-} f(x)\) uses x values less than a

• Right Approach: \(\lim_{x \to a^+} f(x)\) uses x values greater than a

• Jump Discontinuity: Occurs when one-sided limits exist but are not equal

Exercise with Visualization: One-Sided Limits
Exercise 6: Limit Comparison
Compare one-sided limits for different functions:
\(f_1(x) = x + 1\), \(f_2(x) = \frac{|x|}{x}\), \(f_3(x) = \text{piecewise function}\)

Analysis: The chart shows how different functions behave differently from each side.

  • \(f_1(x) = x + 1\): Same limit from both sides
  • \(f_2(x) = \frac{|x|}{x}\): Different limits from each side
  • \(f_3(x)\): Potential jump discontinuity
Solution: Exercises 4 to 5
4 Piecewise Function
Exercise 4
Given \(f(x) = \begin{cases} x^2 & \text{if } x < 1 \\ 2x - 1 & \text{if } x \geq 1 \end{cases}\), find \(\lim_{x \to 1^-} f(x)\) and \(\lim_{x \to 1^+} f(x)\)
Definition:

Piecewise Function: A function defined by different expressions over different intervals

Domain Restriction: Use the appropriate piece based on the approach direction

Left Limit
Use \(x^2\)
Right Limit
Use \(2x - 1\)
Step 1: Find the left-hand limit

For x → 1⁻, we have x < 1, so we use the first piece: f(x) = x²

\(\lim_{x \to 1^-} f(x) = \lim_{x \to 1^-} x^2 = 1^2 = 1\)

Step 2: Find the right-hand limit

For x → 1⁺, we have x > 1, so we use the second piece: f(x) = 2x - 1

\(\lim_{x \to 1^+} f(x) = \lim_{x \to 1^+} (2x - 1) = 2(1) - 1 = 1\)

Step 3: Compare the one-sided limits

Left-hand limit: 1

Right-hand limit: 1

Since both equal 1, the two-sided limit exists

Step 4: Find the two-sided limit

Since both one-sided limits equal 1: \(\lim_{x \to 1} f(x) = 1\)

Step 5: Check continuity

f(1) = 2(1) - 1 = 1, which equals the limit, so f is continuous at x = 1

\(\lim_{x \to 1^-} f(x) = 1\), \(\lim_{x \to 1^+} f(x) = 1\)
Final answer:

\(\lim_{x \to 1^-} f(x) = 1\), \(\lim_{x \to 1^+} f(x) = 1\), so \(\lim_{x \to 1} f(x) = 1\)

Applied rules:

• Piecewise Function: Use the appropriate expression based on the approach direction

Left Approach: Use piece defined for x < a

• Right Approach: Use piece defined for x > a

• Limit Existence: When both one-sided limits are equal

5 Floor Function
Exercise 5
Find \(\lim_{x \to 2^-} \lfloor x \rfloor\) and \(\lim_{x \to 2^+} \lfloor x \rfloor\), where \(\lfloor x \rfloor\) is the floor function
Definition:

Floor Function: \(\lfloor x \rfloor\) returns the greatest integer less than or equal to x

Step Function: Function with constant values over intervals, creating jumps at integer values

Floor Function
\(\lfloor x \rfloor\)
Integer Points
Points of discontinuity
Step 1: Understand the floor function behavior

For x in [1, 2): \(\lfloor x \rfloor = 1\)

For x in [2, 3): \(\lfloor x \rfloor = 2\)

The function has a jump discontinuity at each integer

Step 2: Find the left-hand limit

For x → 2⁻, x is in the interval [1, 2), so \(\lfloor x \rfloor = 1\)

\(\lim_{x \to 2^-} \lfloor x \rfloor = 1\)

Step 3: Find the right-hand limit

For x → 2⁺, x is in the interval [2, 3), so \(\lfloor x \rfloor = 2\)

\(\lim_{x \to 2^+} \lfloor x \rfloor = 2\)

Step 4: Compare the one-sided limits

Left-hand limit: 1

Right-hand limit: 2

Since 1 ≠ 2, the two-sided limit does not exist

Step 5: Classify the discontinuity

This is a jump discontinuity at x = 2, typical of step functions

\(\lim_{x \to 2^-} \lfloor x \rfloor = 1\), \(\lim_{x \to 2^+} \lfloor x \rfloor = 2\)
Final answer:

\(\lim_{x \to 2^-} \lfloor x \rfloor = 1\), \(\lim_{x \to 2^+} \lfloor x \rfloor = 2\), so \(\lim_{x \to 2} \lfloor x \rfloor\) does not exist

Applied rules:

• Floor Function: \(\lfloor x \rfloor = n\) for x ∈ [n, n+1)

• Step Function Discontinuities: Occur at integer values

• Jump Discontinuity: Different one-sided limits at integer points

Comprehensive Theory: One-Sided Limits
\(\lim_{x \to a^-} f(x) = \lim_{x \to a^+} f(x) \iff \lim_{x \to a} f(x) \text{ exists}\)
Limit Existence
Key definitions:

Left-Hand Limit: \(\lim_{x \to a^-} f(x) = L\) means that for every ε > 0, there exists δ > 0 such that if a - δ < x < a, then |f(x) - L| < ε

Right-Hand Limit: \(\lim_{x \to a^+} f(x) = L\) means that for every ε > 0, there exists δ > 0 such that if a < x < a + δ, then |f(x) - L| < ε

Two-Sided Limit: \(\lim_{x \to a} f(x) = L\) exists if and only if both one-sided limits exist and equal L

Jump Discontinuity: A function f has a jump discontinuity at x = a if both \(\lim_{x \to a^-} f(x)\) and \(\lim_{x \to a^+} f(x)\) exist but are not equal

Complete methodology:
  1. Direction Identification: Determine if approaching from left (x → a⁻) or right (x → a⁺)
  2. Domain Analysis: Consider the constraint x < a or x > a as appropriate
  3. Function Simplification: If the function is piecewise, use the appropriate piece
  4. Limit Calculation: Apply standard limit techniques to the restricted function
  5. Comparison: If needed, compare both one-sided limits to determine two-sided limit existence
Tip 1: For piecewise functions, always check which piece applies to each one-sided limit.
Tip 2: The absolute value function |x| changes definition at x = 0, so check both sides.
Tip 3: Step functions like floor and ceiling have jump discontinuities at integer values.
Tip 4: Rational functions with zeros in the denominator often have infinite one-sided limits.
Tip 5: When both one-sided limits equal the function value, the function is continuous at that point.
Common errors: Forgetting to consider domain restrictions, confusing left/right approaches, not realizing that two-sided limit requires equality of one-sided limits.
Key insights: One-sided limits reveal the local behavior of functions near points of discontinuity. They are essential for understanding continuity and differentiability.
Essential Rules:

• Limit Existence: \(\lim_{x \to a} f(x) = L\) exists if and only if \(\lim_{x \to a^-} f(x) = \lim_{x \to a^+} f(x) = L\)

• Left Approach: \(\lim_{x \to a^-} f(x)\) uses values x satisfying a - δ < x < a

• Right Approach: \(\lim_{x \to a^+} f(x)\) uses values x satisfying a < x < a + δ

• Jump Discontinuity: Occurs when one-sided limits exist but are not equal

• Removable Discontinuity: Occurs when one-sided limits exist and are equal but differ from f(a)

Exercise with Visualization: One-Sided Limits
Exercise 6: Limit Comparison
Compare one-sided limits for different functions:
\(f_1(x) = x + 1\), \(f_2(x) = \frac{|x|}{x}\), \(f_3(x) = \text{piecewise function}\)

Analysis: The chart shows how different functions behave differently from each side.

  • \(f_1(x) = x + 1\): Same limit from both sides
  • \(f_2(x) = \frac{|x|}{x}\): Different limits from each side
  • \(f_3(x)\): Potential jump discontinuity

Questions & Answers

Question: Why do we need to study one-sided limits separately? Isn't the regular limit enough?

Answer: One-sided limits are fundamental for several reasons:

  • Limit Existence: The two-sided limit exists if and only if both one-sided limits exist and are equal
  • Function Behavior: They reveal how functions behave near points of discontinuity
  • Continuity Definition: A function is continuous at a point if the limit equals the function value
  • Real Applications: Some physical situations depend on approach direction (like one-way streets in a model)

Without understanding one-sided limits, we couldn't properly define continuity, derivatives, or analyze functions with discontinuities.

Question: How do I know which piece of a piecewise function to use when finding one-sided limits?

Answer: It depends on the approach direction:

  • For left-hand limit (x → a⁻): Use the piece defined for x < a
  • For right-hand limit (x → a⁺): Use the piece defined for x > a
  • At the boundary (x = a): Use the piece defined for x ≥ a or x ≤ a as specified

For example, if f(x) = x² for x < 2 and f(x) = 2x for x ≥ 2, then for lim_{x→2⁻}, use x², and for lim_{x→2⁺}, use 2x.

Question: What's the difference between a jump discontinuity and other types of discontinuities?

Answer: There are three main types of discontinuities:

  • Removable: One-sided limits exist and are equal, but differ from f(a) (a "hole")
  • Jump: Both one-sided limits exist but are not equal (what we studied here)
  • Infinite: At least one one-sided limit is infinite (vertical asymptote)

Jump discontinuities are characterized by a "jump" in the function value, where the function "jumps" from one value to another as you pass through the point of discontinuity.