Solved Exercises on Types of Discontinuities in Calculus 1

Master types of discontinuities: removable, jump, infinite, oscillating, essential discontinuities through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Removable Discontinuity
Exercise 1
Analyze the discontinuity in:
\(f(x) = \frac{x^2 - 4}{x - 2}\) at \(x = 2\)
Definition:

Removable Discontinuity: A function has a removable discontinuity at x = a if \(\lim_{x \to a} f(x)\) exists but either f(a) is undefined or \(\lim_{x \to a} f(x) \neq f(a)\)

Also Called: "Hole" or "Point discontinuity"

Removable Discontinuity Analysis:
  1. Identify where the function is undefined
  2. Check if the limit exists at that point
  3. Factor and simplify the expression
  4. Determine the value that would make the function continuous
Original Function
\(f(x) = \frac{x^2 - 4}{x - 2}\)
Simplified Form
\(g(x) = x + 2\)
Step 1: Identify the problem point

At x = 2: denominator = \(2 - 2 = 0\), so f(2) is undefined

Step 2: Factor the numerator

\(x^2 - 4 = (x+2)(x-2)\) (difference of squares)

Step 3: Simplify the expression

\(f(x) = \frac{(x+2)(x-2)}{x-2} = x+2\) for \(x \neq 2\)

Step 4: Find the limit

\(\lim_{x \to 2} f(x) = \lim_{x \to 2} (x+2) = 2+2 = 4\)

Step 5: Compare with function value

Since f(2) is undefined but \(\lim_{x \to 2} f(x) = 4\), this is a removable discontinuity

Step 6: Define the removable discontinuity

If we defined f(2) = 4, the function would be continuous at x = 2

Removable discontinuity at \(x = 2\)
Final answer:

The function has a removable discontinuity at x = 2 with \(\lim_{x \to 2} f(x) = 4\)

Applied rules:

• Difference of Squares: \(a^2 - b^2 = (a+b)(a-b)\)

• Canceling Factors: Valid when \(x \neq 2\)

• Removable Discontinuity: Limit exists but function is undefined

2 Jump Discontinuity
Exercise 2
Analyze the discontinuity in:
\(f(x) = \begin{cases} x + 1 & \text{if } x < 1 \\ x - 1 & \text{if } x \geq 1 \end{cases}\) at \(x = 1\)
Definition:

Jump Discontinuity: A function has a jump discontinuity at x = a if both one-sided limits exist but are not equal

Notation: \(\lim_{x \to a^-} f(x) \neq \lim_{x \to a^+} f(x)\)

Left Piece
\(x + 1\) for \(x < 1\)
Right Piece
\(x - 1\) for \(x \geq 1\)
Step 1: Find the left-hand limit

For \(x \to 1^-\), use the left piece: \(f(x) = x + 1\)

\(\lim_{x \to 1^-} f(x) = \lim_{x \to 1^-} (x + 1) = 1 + 1 = 2\)

Step 2: Find the right-hand limit

For \(x \to 1^+\), use the right piece: \(f(x) = x - 1\)

\(\lim_{x \to 1^+} f(x) = \lim_{x \to 1^+} (x - 1) = 1 - 1 = 0\)

Step 3: Compare the one-sided limits

Left limit: 2, Right limit: 0

Since \(2 \neq 0\), the two-sided limit does not exist

Step 4: Find the function value

At x = 1: Use the right piece since \(x \geq 1\)

\(f(1) = 1 - 1 = 0\)

Step 5: Classify the discontinuity

Both one-sided limits exist but are not equal, so this is a jump discontinuity

Step 6: Calculate the jump size

Jump size = |left limit - right limit| = |2 - 0| = 2

Jump discontinuity at \(x = 1\) with jump size = 2
Final answer:

The function has a jump discontinuity at x = 1 with \(\lim_{x \to 1^-} f(x) = 2\) and \(\lim_{x \to 1^+} f(x) = 0\)

Applied rules:

• One-sided Limits: Use appropriate piece for each direction

• Jump Discontinuity: Both limits exist but are unequal

• Jump Size: |left limit - right limit|

3 Infinite Discontinuity
Exercise 3
Analyze the discontinuity in:
\(f(x) = \frac{1}{x}\) at \(x = 0\)
Definition:

Infinite Discontinuity: A function has an infinite discontinuity at x = a if at least one one-sided limit is infinite

Vertical Asymptote: The line x = a where the function grows without bound

Function
\(f(x) = \frac{1}{x}\)
Discontinuity Point
\(x = 0\)
Step 1: Check if f(0) is defined

At x = 0: denominator = 0, so f(0) is undefined

Step 2: Find the left-hand limit

As x approaches 0 from the left (negative values):

\(\lim_{x \to 0^-} \frac{1}{x} = -\infty\)

Step 3: Find the right-hand limit

As x approaches 0 from the right (positive values):

\(\lim_{x \to 0^+} \frac{1}{x} = +\infty\)

Step 4: Analyze the behavior

Since both one-sided limits approach infinity (though in opposite directions), neither is finite

The function has vertical asymptotes at x = 0

Step 5: Classify the discontinuity

At least one one-sided limit is infinite, so this is an infinite discontinuity

Step 6: Describe the asymptotic behavior

The function approaches +∞ as x approaches 0 from the right and -∞ as x approaches 0 from the left

Infinite discontinuity at \(x = 0\)
Final answer:

The function has an infinite discontinuity at x = 0 with \(\lim_{x \to 0^-} f(x) = -\infty\) and \(\lim_{x \to 0^+} f(x) = +\infty\)

Applied rules:

• Infinite Discontinuity: At least one one-sided limit is infinite

• Vertical Asymptote: The line x = 0

• Sign Analysis: Negative values give negative infinity, positive values give positive infinity

Classification of Discontinuities
\(f \text{ discontinuous at } a \iff \lim_{x \to a} f(x) \neq f(a) \lor \lim_{x \to a} f(x) \text{ DNE}\)
Discontinuity Definition
Removable
lim exists, f undefined
"Hole"
Jump
lim DNE, both sides exist
Step function
Infinite
lim = ±∞
Asymptote
Key definitions:

Discontinuity: A point where a function is not continuous

Removable Discontinuity: \(\lim_{x \to a} f(x)\) exists but \(f(a)\) is undefined or \(\lim_{x \to a} f(x) \neq f(a)\)

Jump Discontinuity: Both \(\lim_{x \to a^-} f(x)\) and \(\lim_{x \to a^+} f(x)\) exist but are not equal

Infinite Discontinuity: At least one one-sided limit is infinite

Oscillating Discontinuity: The function oscillates without approaching a specific value

Complete methodology:
  1. Identify the point: Locate where the function appears discontinuous
  2. Check function value: Determine if f(a) is defined
  3. Find one-sided limits: Calculate \(\lim_{x \to a^-} f(x)\) and \(\lim_{x \to a^+} f(x)\)
  4. Compare values: Analyze the relationship between limits and function value
  5. Classify: Determine the type based on the characteristics found
Tip 1: Look for holes (open circles) in graphs for removable discontinuities.
Tip 2: Jump discontinuities show a visible "jump" in the graph.
Tip 3: Vertical asymptotes indicate infinite discontinuities.
Tip 4: Oscillating functions like sin(1/x) have essential discontinuities.
Common errors: Misidentifying removable vs. jump discontinuities, not checking both one-sided limits, confusing infinite with oscillating discontinuities.
Exam preparation: Practice identifying all types from graphs, memorize the classification criteria, understand the graphical features.
Classification Rules:

• Removable: \(\lim_{x \to a} f(x)\) exists but \(\lim_{x \to a} f(x) \neq f(a)\) or f(a) is undefined

• Jump: \(\lim_{x \to a^-} f(x)\) and \(\lim_{x \to a^+} f(x)\) both exist but \(\lim_{x \to a^-} f(x) \neq \lim_{x \to a^+} f(x)\)

• Infinite: At least one of \(\lim_{x \to a^-} f(x)\) or \(\lim_{x \to a^+} f(x)\) is infinite

• Oscillating: The function oscillates between values without approaching a specific limit

Exercise with Visualization: Discontinuity Types
Exercise 6: Function Behaviors
Compare different types of discontinuities:
\(f_1(x) = \frac{x^2-4}{x-2}\) (removable), \(f_2(x) = \begin{cases} x+1 & x<1 \\ x-1 & x \geq 1 \end{cases}\) (jump), \(f_3(x) = \frac{1}{x}\) (infinite)

Analysis: The chart shows how different types of discontinuities appear graphically.

  • \(f_1(x)\): Removable discontinuity (hole) at x=2
  • \(f_2(x)\): Jump discontinuity at x=1
  • \(f_3(x)\): Infinite discontinuity (vertical asymptote) at x=0
Solution: Exercises 4 to 5
4 Oscillating Discontinuity
Exercise 4
Analyze the discontinuity in:
\(f(x) = \sin\left(\frac{1}{x}\right)\) at \(x = 0\)
Definition:

Oscillating Discontinuity: A function has an oscillating discontinuity at x = a if it oscillates between values without approaching a specific limit

Essential Discontinuity: A discontinuity that is not removable, jump, or infinite

Function
\(f(x) = \sin\left(\frac{1}{x}\right)\)
Point
\(x = 0\)
Step 1: Check if f(0) is defined

At x = 0: \(\frac{1}{x}\) is undefined, so f(0) is undefined

Step 2: Analyze the behavior as x approaches 0

As x approaches 0, \(\frac{1}{x}\) approaches ±∞

So \(\sin\left(\frac{1}{x}\right)\) oscillates between -1 and 1 infinitely many times

Step 3: Examine the oscillation pattern

For x = \(\frac{1}{n\pi}\) where n is an integer, \(\sin\left(\frac{1}{x}\right) = \sin(n\pi) = 0\)

For x = \(\frac{1}{(2n+1)\pi/2}\), \(\sin\left(\frac{1}{x}\right) = \sin\left(\frac{(2n+1)\pi}{2}\right) = \pm 1\)

Step 4: Determine if the limit exists

Since \(\sin\left(\frac{1}{x}\right)\) oscillates between -1 and 1 infinitely often as x → 0, the limit does not exist

Step 5: Classify the discontinuity

This is an essential discontinuity (specifically an oscillating discontinuity) because the function oscillates without approaching any limit

Step 6: Describe the behavior

The function oscillates infinitely many times in any neighborhood of x = 0, never settling on a specific value

Essential (oscillating) discontinuity at \(x = 0\)
Final answer:

The function has an essential discontinuity at x = 0 because \(\lim_{x \to 0} \sin\left(\frac{1}{x}\right)\) does not exist

Applied rules:

• Oscillating Discontinuity: Function oscillates without approaching a limit

• Essential Discontinuity: Neither removable, jump, nor infinite

• Limit Non-existence: When function values don't converge to a single value

5 Multiple Discontinuities
Exercise 5
Analyze all discontinuities in:
\(f(x) = \frac{x^2 - 1}{x^2 - 4}\)
Definition:

Multiple Discontinuities: A function can have different types of discontinuities at different points

Rational Function Discontinuities: Occur where the denominator is zero

Function
\(f(x) = \frac{x^2 - 1}{x^2 - 4}\)
Points of Interest
\(x = \pm 2\)
Step 1: Factor numerator and denominator

\(f(x) = \frac{x^2 - 1}{x^2 - 4} = \frac{(x+1)(x-1)}{(x+2)(x-2)}\)

Step 2: Identify points of discontinuity

Denominator = 0 when x = ±2, so f(x) is undefined at x = -2 and x = 2

Step 3: Analyze x = -2

At x = -2: numerator = \((-2)^2 - 1 = 3\), denominator = 0

This creates a vertical asymptote (infinite discontinuity)

\(\lim_{x \to -2^-} f(x) = +\infty\) and \(\lim_{x \to -2^+} f(x) = -\infty\)

Step 4: Analyze x = 2

At x = 2: numerator = \(2^2 - 1 = 3\), denominator = 0

This also creates a vertical asymptote (infinite discontinuity)

\(\lim_{x \to 2^-} f(x) = -\infty\) and \(\lim_{x \to 2^+} f(x) = +\infty\)

Step 5: Check for removable discontinuities

Since there are no common factors between numerator and denominator, no removable discontinuities exist

Step 6: State all discontinuities

The function has infinite discontinuities at x = -2 and x = 2

Infinite discontinuities at \(x = -2\) and \(x = 2\)
Final answer:

The function has infinite discontinuities at x = -2 and x = 2

Applied rules:

• Rational Function Discontinuities: Occur where denominator is zero

• Infinite Discontinuity: When limit approaches ±∞

• Multiple Discontinuities: Analyze each point individually

Comprehensive Theory: Types of Discontinuities
\(f \text{ discontinuous at } a \iff \neg[\lim_{x \to a} f(x) = f(a)]\)
Discontinuity Condition
Key definitions:

Removable Discontinuity: \(\lim_{x \to a} f(x)\) exists but \(\lim_{x \to a} f(x) \neq f(a)\) or f(a) is undefined

Jump Discontinuity: Both one-sided limits exist but \(\lim_{x \to a^-} f(x) \neq \lim_{x \to a^+} f(x)\)

Infinite Discontinuity: At least one one-sided limit is infinite

Oscillating Discontinuity: Function oscillates without approaching a specific limit

Essential Discontinuity: Any discontinuity that is not removable, jump, or infinite

Complete methodology:
  1. Locate the point: Identify where the function appears discontinuous
  2. Check function definition: Verify if f(a) is defined
  3. Find one-sided limits: Calculate both \(\lim_{x \to a^-} f(x)\) and \(\lim_{x \to a^+} f(x)\)
  4. Analyze the limits: Determine if they exist and are finite
  5. Compare with function value: Check if \(\lim_{x \to a} f(x) = f(a)\)
  6. Classify: Assign the appropriate discontinuity type
Tip 1: Graphs are invaluable for visualizing different types of discontinuities.
Tip 2: Always check both one-sided limits for piecewise functions.
Tip 3: For rational functions, look for zeros in the denominator.
Tip 4: Oscillating functions often have essential discontinuities at critical points.
Tip 5: The function value at the point doesn't affect the type of discontinuity, only the existence of the limit.
Common errors: Confusing removable with jump discontinuities, not checking both sides for piecewise functions, misidentifying oscillating behavior as infinite.
Key insights: Understanding discontinuities is crucial for analyzing function behavior and is foundational for calculus concepts like continuity and differentiability.
Essential Rules:

• Removable: Limit exists, function value differs or is undefined

• Jump: Both one-sided limits exist but are different

• Infinite: At least one one-sided limit is infinite

• Oscillating: Function oscillates without approaching a specific value

• Essential: None of the above types

Exercise with Visualization: Discontinuity Types
Exercise 6: Function Behaviors
Compare different types of discontinuities:
\(f_1(x) = \frac{x^2-4}{x-2}\) (removable), \(f_2(x) = \begin{cases} x+1 & x<1 \\ x-1 & x \geq 1 \end{cases}\) (jump), \(f_3(x) = \frac{1}{x}\) (infinite)

Analysis: The chart shows how different types of discontinuities appear graphically.

  • \(f_1(x)\): Removable discontinuity (hole) at x=2
  • \(f_2(x)\): Jump discontinuity at x=1
  • \(f_3(x)\): Infinite discontinuity (vertical asymptote) at x=0

Questions & Answers

Question: How can I tell the difference between an infinite discontinuity and an oscillating discontinuity just by looking at a graph?

Answer: The visual differences are distinct:

  • Infinite discontinuity: The graph shoots straight up or down toward infinity, creating a vertical asymptote
  • Oscillating discontinuity: The graph oscillates back and forth infinitely many times as it approaches the point, never settling down

For example, \(\frac{1}{x}\) at x = 0 shows a vertical asymptote (infinite), while \(\sin(\frac{1}{x})\) at x = 0 shows rapid oscillation (oscillating).

Question: What makes a removable discontinuity "removable"? Can we really just fix it?

Answer: A removable discontinuity is "removable" because we can define or redefine the function value at that point to make it continuous:

  • Original function: Has a "hole" in the graph
  • Fixed function: We assign the function value to equal the limit
  • Result: The function becomes continuous at that point

For example, if \(f(x) = \frac{x^2-4}{x-2}\) for \(x \neq 2\), we can define \(f(2) = 4\) to make it continuous.

Question: Can a function have multiple types of discontinuities at the same point?

Answer: No, a function can only have one type of discontinuity at each point. However, a single function can have different types of discontinuities at different points:

  • One point might have a removable discontinuity
  • Another point might have a jump discontinuity
  • A third point might have an infinite discontinuity

Each point is classified independently based on the behavior of the function at that specific location.