Mean Value Theorem for Integrals: Average Value and Theoretical Applications

Master the Mean Value Theorem for integrals through 5 detailed exercises covering average values, existence of mean points, and theoretical applications.

Exercise Solutions: 1 to 3
1 Average Value
Exercise 1
Find the average value of f(x) = 3x² - 2x + 1 on the interval [1, 4]. Then find the value c guaranteed by the Mean Value Theorem for Integrals.
Definitions:

Average Value Formula: \( f_{avg} = \frac{1}{b-a} \int_a^b f(x) \, dx \)

Mean Value Theorem: If f is continuous on [a,b], then ∃ c ∈ [a,b] such that f(c) = f_avg

Solution Method:
  1. Compute the average value using the integral formula
  2. Set f(c) equal to the average value
  3. Solve for c in the given interval
  4. Verify that the theorem applies (continuity)
Function
f(x) = 3x² - 2x + 1
Interval
[1, 4]
Length
3
Step 1: Apply the average value formula

\( f_{avg} = \frac{1}{4-1} \int_1^4 (3x^2 - 2x + 1) \, dx = \frac{1}{3} \int_1^4 (3x^2 - 2x + 1) \, dx \)

Step 2: Evaluate the integral

\( \int_1^4 (3x^2 - 2x + 1) \, dx = [x^3 - x^2 + x]_1^4 \)

\( = (64 - 16 + 4) - (1 - 1 + 1) = 52 - 1 = 51 \)

Step 3: Calculate the average value

\( f_{avg} = \frac{1}{3} \cdot 51 = 17 \)

Step 4: Find the value c where f(c) = f_avg

\( f(c) = 3c^2 - 2c + 1 = 17 \)

\( 3c^2 - 2c + 1 - 17 = 0 \)

\( 3c^2 - 2c - 16 = 0 \)

Step 5: Solve using the quadratic formula

\( c = \frac{2 \pm \sqrt{4 + 4(3)(16)}}{2(3)} = \frac{2 \pm \sqrt{4 + 192}}{6} = \frac{2 \pm \sqrt{196}}{6} = \frac{2 \pm 14}{6} \)

\( c_1 = \frac{16}{6} = \frac{8}{3} \approx 2.67 \)

\( c_2 = \frac{-12}{6} = -2 \)

Step 6: Select the valid solution

Since we need c ∈ [1, 4], we select c = 8/3 ≈ 2.67

(c = -2 is outside the interval)

Average value = 17, c = 8/3
Final answer:

The average value of f(x) is 17, and the value guaranteed by MVT is c = 8/3

Applied rules:

• Mean Value Theorem: Guarantees existence of c with f(c) = f_avg

• Continuity: Required for MVT applicability

• Quadratic Formula: For solving 2nd degree equations

2 Physical Application
Exercise 2
The temperature in a city during a 24-hour period is modeled by T(t) = 20 + 10sin(πt/12) where t is measured in hours. Find the average temperature over the 24-hour period and interpret the result using the Mean Value Theorem.
Definitions:

Periodic Average: Average value of periodic functions over complete periods

Function
T(t) = 20 + 10sin(πt/12)
Interval
[0, 24]
Period
24 hrs
Step 1: Set up the average value integral

\( T_{avg} = \frac{1}{24-0} \int_0^{24} (20 + 10\sin(\frac{\pi t}{12})) \, dt = \frac{1}{24} \int_0^{24} (20 + 10\sin(\frac{\pi t}{12})) \, dt \)

Step 2: Split the integral

\( T_{avg} = \frac{1}{24} \left[ \int_0^{24} 20 \, dt + \int_0^{24} 10\sin(\frac{\pi t}{12}) \, dt \right] \)

Step 3: Evaluate the first integral

\( \int_0^{24} 20 \, dt = [20t]_0^{24} = 20(24) - 0 = 480 \)

Step 4: Evaluate the second integral using substitution

Let u = πt/12, then du = π/12 dt, so dt = 12/π du

When t = 0: u = 0

When t = 24: u = 2π

\( \int_0^{24} 10\sin(\frac{\pi t}{12}) \, dt = \int_0^{2\pi} 10\sin(u) \cdot \frac{12}{\pi} \, du = \frac{120}{\pi} \int_0^{2\pi} \sin(u) \, du \)

\( = \frac{120}{\pi} [-\cos(u)]_0^{2\pi} = \frac{120}{\pi} [-\cos(2\pi) + \cos(0)] = \frac{120}{\pi}[-1 + 1] = 0 \)

Step 5: Calculate the average value

\( T_{avg} = \frac{1}{24}[480 + 0] = \frac{480}{24} = 20 \) degrees

Step 6: Apply the Mean Value Theorem

According to the MVT for integrals, there exists a time c ∈ [0, 24] such that T(c) = 20

\( 20 + 10\sin(\frac{\pi c}{12}) = 20 \)

\( \sin(\frac{\pi c}{12}) = 0 \)

Therefore: \( \frac{\pi c}{12} = n\pi \) for integer n

So: \( c = 12n \) for n = 0, 1, 2 (within [0, 24])

Valid values: c = 0, 12, 24 hours

Average temperature = 20°, occurs at t = 0, 12, 24 hours
Final answer:

The average temperature is 20 degrees, which occurs at t = 0, 12, and 24 hours

Applied rules:

• Periodic Average: Average of sin/cos over full period is zero

• Constant Average: Average of constant is the constant itself

• Trig Integration: ∫sin(at)dt = -(1/a)cos(at)

3 Economic Application
Exercise 3
The marginal cost of producing x items is given by C'(x) = 100 + 0.5x + 0.01x². Find the average marginal cost of producing the first 100 items and determine the production level where the marginal cost equals this average.
Definitions:

Average Marginal Cost: Average value of the marginal cost function over an interval

Marginal Cost
C'(x) = 100 + 0.5x + 0.01x²
Interval
[0, 100]
Application
Economics
Step 1: Set up the average value integral

\( C'_{avg} = \frac{1}{100-0} \int_0^{100} (100 + 0.5x + 0.01x^2) \, dx \)

Step 2: Evaluate the integral

\( \int_0^{100} (100 + 0.5x + 0.01x^2) \, dx = [100x + 0.25x^2 + \frac{0.01x^3}{3}]_0^{100} \)

\( = (100 \cdot 100 + 0.25 \cdot 10000 + \frac{0.01 \cdot 1000000}{3}) - 0 \)

\( = 10000 + 2500 + \frac{10000}{3} = 12500 + 3333.33 = 15833.33 \)

Step 3: Calculate the average marginal cost

\( C'_{avg} = \frac{1}{100} \cdot 15833.33 = 158.33 \) dollars per item

Step 4: Find production level where C'(x) = average

\( 100 + 0.5x + 0.01x^2 = 158.33 \)

\( 0.01x^2 + 0.5x + 100 - 158.33 = 0 \)

\( 0.01x^2 + 0.5x - 58.33 = 0 \)

Step 5: Solve using quadratic formula

\( x = \frac{-0.5 \pm \sqrt{0.25 + 4(0.01)(58.33)}}{2(0.01)} = \frac{-0.5 \pm \sqrt{0.25 + 2.333}}{0.02} \)

\( = \frac{-0.5 \pm \sqrt{2.583}}{0.02} = \frac{-0.5 \pm 1.607}{0.02} \)

\( x_1 = \frac{1.107}{0.02} = 55.35 \) items

\( x_2 = \frac{-2.107}{0.02} = -105.35 \) (not physically meaningful)

Step 6: Interpret the result

By the Mean Value Theorem for integrals, there exists a production level c = 55.35 items where the marginal cost equals the average marginal cost of $158.33 per item.

Avg. marginal cost = $158.33, occurs at x ≈ 55.35 items
Final answer:

The average marginal cost is $158.33 per item, occurring at approximately 55.35 items of production

Applied rules:

• Average Value: Applies to any continuous function

• Quadratic Formula: For solving 2nd degree equations

• Economic Interpretation: Marginal cost equals average at some production level

Key Formulas and Theorems
\( f(c) = \frac{1}{b-a} \int_a^b f(x) \, dx \)
Mean Value Theorem for Integrals
Average Value
\( f_{avg} = \frac{1}{b-a} \int_a^b f(x) \, dx \)
Mean height of function
Existence
∃ c ∈ [a,b]: f(c) = f_avg
Point where function equals average
Continuity
f ∈ C[a,b] ⇒ MVT holds
Requirement for theorem
Key definitions:

Mean Value Theorem: States that for a continuous function on a closed interval, there exists a point where the function equals its average value

Average Value: The constant value that would give the same integral as the function over the interval

Continuity Requirement: The function must be continuous on the closed interval [a, b]

Solution process:
  1. Verify continuity: Ensure f(x) is continuous on [a, b]
  2. Calculate average: Use the average value formula
  3. Set up equation: f(c) = average value
  4. Solve for c: Find value(s) in the interval [a, b]
  5. Verify: Check that the solution is in the given interval
Tip 1: The theorem guarantees existence but not uniqueness of the value c.
Tip 2: For symmetric functions, c often occurs at the midpoint of the interval.
Tip 3: The average value always lies between the minimum and maximum values of f(x) on [a, b].
Tip 4: The theorem does not hold for discontinuous functions.
Exercise Solutions: 4 to 5
4 Advanced Theoretical
Exercise 4
Prove that if f is continuous on [a, b] and differentiable on (a, b), and if f(a) = f(b), then there exists a point c ∈ (a, b) such that f'(c) = 0. (This is Rolle's Theorem, related to MVT.)
Definitions:

Rolle's Theorem: A special case of the Mean Value Theorem for derivatives

Conditions
f ∈ C[a,b], f ∈ D(a,b), f(a) = f(b)
Conclusion
∃ c ∈ (a,b): f'(c) = 0
Relation
Connected to MVT for integrals
Step 1: Apply Extreme Value Theorem

Since f is continuous on [a, b], it attains its absolute maximum and minimum on [a, b]

Step 2: Consider two cases

Case 1: f is constant on [a, b]

If f(x) = k for all x ∈ [a, b], then f'(x) = 0 for all x ∈ (a, b)

Case 2: f is not constant on [a, b]

Step 3: Analyze Case 2

If f is not constant, then f has an absolute extremum that occurs at some point c ∈ (a, b)

(Since f(a) = f(b), extrema cannot occur only at endpoints)

Step 4: Apply Fermat's Theorem

If f has a local extremum at c ∈ (a, b) and f is differentiable at c, then f'(c) = 0

Step 5: Conclusion

In both cases, there exists c ∈ (a, b) such that f'(c) = 0

Rolle's Theorem proved
Final answer:

The proof demonstrates that Rolle's Theorem holds under the stated conditions

Applied rules:

• Extreme Value Theorem: Continuous functions attain extrema on closed intervals

• Fermat's Theorem: Derivative is zero at interior extrema

• Logical Cases: Break into constant vs. non-constant functions

5 Physics Application
Exercise 5
The velocity of a particle moving along a straight line is given by v(t) = 4cos(πt/2) m/s. Find the average velocity over the interval [0, 2] seconds and determine when the instantaneous velocity equals this average.
Definitions:

Average Velocity: Displacement divided by time interval

Velocity
v(t) = 4cos(πt/2)
Interval
[0, 2]
Units
m/s
Step 1: Set up the average velocity integral

\( v_{avg} = \frac{1}{2-0} \int_0^2 4\cos(\frac{\pi t}{2}) \, dt = \frac{1}{2} \int_0^2 4\cos(\frac{\pi t}{2}) \, dt \)

Step 2: Evaluate the integral using substitution

Let u = πt/2, then du = π/2 dt, so dt = 2/π du

When t = 0: u = 0

When t = 2: u = π

\( \int_0^2 4\cos(\frac{\pi t}{2}) \, dt = \int_0^{\pi} 4\cos(u) \cdot \frac{2}{\pi} \, du = \frac{8}{\pi} \int_0^{\pi} \cos(u) \, du \)

\( = \frac{8}{\pi} [\sin(u)]_0^{\pi} = \frac{8}{\pi} [\sin(\pi) - \sin(0)] = \frac{8}{\pi}[0 - 0] = 0 \)

Step 3: Calculate average velocity

\( v_{avg} = \frac{1}{2} \cdot 0 = 0 \) m/s

Step 4: Find when instantaneous velocity equals average

\( v(t) = 4\cos(\frac{\pi t}{2}) = 0 \)

\( \cos(\frac{\pi t}{2}) = 0 \)

Therefore: \( \frac{\pi t}{2} = \frac{\pi}{2} + n\pi \) for integer n

So: \( t = 1 + 2n \)

Step 5: Find solutions in the interval [0, 2]

For n = 0: t = 1 (valid)

For n = -1: t = -1 (invalid)

For n = 1: t = 3 (invalid)

Therefore: t = 1 second

Step 6: Physical interpretation

The average velocity is 0 m/s because the particle returns to its starting position after 2 seconds (as evidenced by the integral being 0). The instantaneous velocity equals the average at t = 1 second.

Average velocity = 0 m/s, occurs at t = 1 s
Final answer:

The average velocity is 0 m/s, occurring at t = 1 second

Applied rules:

• Trigonometric Average: Average of cosine over period is zero

• Integration: ∫cos(at)dt = (1/a)sin(at)

• Physical Meaning: Average velocity of periodic motion

Mean Value Theorem Concepts
\( \exists c \in [a,b] : f(c) = \frac{1}{b-a} \int_a^b f(x) \, dx \)
Existence Statement
Key concepts:

Continuity Requirement: Function must be continuous on the closed interval [a, b]

Geometric Interpretation: There exists a rectangle with base (b-a) and height f(c) that has the same area as the region under the curve

Comparison with MVT for Derivatives: Relates function values to average of function vs. derivative values to average of derivative

Verification process:
  1. Check continuity: Verify f(x) is continuous on [a, b]
  2. Compute average: Calculate (1/(b-a))∫[a to b] f(x) dx
  3. Set equality: Form equation f(c) = average value
  4. Solve: Find c in the interval [a, b]
  5. Confirm: Verify the solution is in the domain
Tip 1: The theorem is an existence theorem - it guarantees c exists but doesn't provide a method to find it.
Tip 2: The average value always lies between the minimum and maximum values of f(x).
Tip 3: For symmetric functions, c often occurs at the midpoint.
Tip 4: The theorem doesn't hold for functions with discontinuities.
Common errors: Applying to discontinuous functions, not verifying the interval, confusing with MVT for derivatives.
Exam preparation: Practice with various function types and applications.
Essential formulas:

• Average Value: \( f_{avg} = \frac{1}{b-a} \int_a^b f(x) \, dx \)

• MVT Existence: \( \exists c \in [a,b] : f(c) = f_{avg} \)

• Continuity: Required for theorem validity

• Comparison: Related to MVT for derivatives and Rolle's theorem

Questions & Answers

Question: What's the difference between the Mean Value Theorem for integrals and the Mean Value Theorem for derivatives?

Answer: The two theorems are related but distinct:

  • MVT for Integrals: Relates the average value of a function to its value at some point
    • Statement: ∃ c ∈ [a,b] such that f(c) = (1/(b-a))∫[a to b] f(x) dx
    • Connects function values to average of the function
  • MVT for Derivatives: Relates the average rate of change to the derivative at some point
    • Statement: ∃ c ∈ (a,b) such that f'(c) = (f(b) - f(a))/(b - a)
    • Connects derivative values to average rate of change

Both theorems guarantee the existence of a special point, but they operate on different aspects of the function.

Question: Can there be more than one value of c that satisfies the Mean Value Theorem for integrals?

Answer: Yes, the Mean Value Theorem guarantees the existence of at least one value c, but it doesn't guarantee uniqueness. There can be multiple values of c that satisfy f(c) = f_avg.

For example, consider f(x) = sin(x) on [0, 2π]. The average value is 0, and sin(x) = 0 at x = 0, π, and 2π. All three values satisfy the theorem.

The theorem ensures at least one such point exists, but there may be multiple points where the function equals its average value.

Question: What happens if the function is not continuous on the interval [a, b]?

Answer: The Mean Value Theorem for integrals requires continuity on the closed interval [a, b]. If the function has discontinuities:

  1. The theorem may not apply
  2. There might not exist a point c where f(c) equals the average value
  3. The function might equal its average value at some points but not others

Continuity is a crucial requirement for the theorem to guarantee the existence of the special point c. Without continuity, the theorem's conclusion is not guaranteed.