Volumes by Disks and Washers: Comprehensive Analysis and Solutions

Master volume calculations using the disk and washer methods through 5 detailed exercises covering rotation about axes and other lines.

Exercise Solutions: 1 to 3
1 Disk Method
Exercise 1
Find the volume of the solid generated by revolving the region bounded by y = √x, y = 0, and x = 4 about the x-axis.
Definitions:

Disk Method: \( V = \pi \int_a^b [R(x)]^2 \, dx \) where R(x) is the radius of the disk at position x

Washer Method: \( V = \pi \int_a^b ([R(x)]^2 - [r(x)]^2) \, dx \) where R(x) is outer radius and r(x) is inner radius

Solution Method:
  1. Sketch the region to be revolved
  2. Identify the axis of rotation
  3. Determine if disk or washer method is needed
  4. Find the radius function(s)
  5. Set up and evaluate the integral
Region
y = √x, y = 0, x = 4
Axis
x-axis
Method
Disk
Step 1: Sketch the region

The region is bounded by y = √x, y = 0, and x = 4

It extends from x = 0 to x = 4

Step 2: Identify the axis of rotation

The region is rotated about the x-axis (y = 0)

Step 3: Determine the method

Since the region touches the axis of rotation, we use the disk method

Step 4: Find the radius function

At position x, the radius is the distance from the axis of rotation to the curve

R(x) = √x

Step 5: Set up the integral

\( V = \pi \int_0^4 [R(x)]^2 \, dx = \pi \int_0^4 (\sqrt{x})^2 \, dx = \pi \int_0^4 x \, dx \)

Step 6: Evaluate the integral

\( V = \pi \int_0^4 x \, dx = \pi[\frac{x^2}{2}]_0^4 = \pi[\frac{16}{2} - 0] = 8\pi \)

Volume = 8π cubic units
Final answer:

The volume of the solid is 8π cubic units

Applied rules:

• Disk Method: V = π∫[R(x)]²dx

• Radius: Distance from axis to curve

• Integration: ∫x dx = x²/2

2 Washer Method
Exercise 2
Find the volume of the solid generated by revolving the region bounded by y = x² and y = √x about the x-axis.
Definitions:

Washer Method: Used when region has a hole after rotation

Region
y = x², y = √x
Axis
x-axis
Method
Washer
Step 1: Find intersection points

\( x^2 = \sqrt{x} \)

\( x^4 = x \) (squaring both sides)

\( x^4 - x = 0 \)

\( x(x^3 - 1) = 0 \)

Therefore: x = 0 or x = 1

Step 2: Determine which function is on top

On [0, 1]: Test x = 0.25

y₁ = (0.25)² = 0.0625

y₂ = √0.25 = 0.5

So √x ≥ x² on [0, 1]

Step 3: Identify the axis of rotation

The region is rotated about the x-axis (y = 0)

Step 4: Determine the method

Since the region is bounded by two curves, we use the washer method

Step 5: Find the outer and inner radii

Outer radius: R(x) = √x (distance from x-axis to upper curve)

Inner radius: r(x) = x² (distance from x-axis to lower curve)

Step 6: Set up the integral

\( V = \pi \int_0^1 ([R(x)]^2 - [r(x)]^2) \, dx = \pi \int_0^1 ((\sqrt{x})^2 - (x^2)^2) \, dx \)

\( V = \pi \int_0^1 (x - x^4) \, dx \)

Step 7: Evaluate the integral

\( V = \pi \int_0^1 (x - x^4) \, dx = \pi[\frac{x^2}{2} - \frac{x^5}{5}]_0^1 \)

\( = \pi[\frac{1}{2} - \frac{1}{5}] = \pi[\frac{5 - 2}{10}] = \frac{3\pi}{10} \)

Volume = 3π/10 cubic units
Final answer:

The volume of the solid is 3π/10 cubic units

Applied rules:

• Washer Method: V = π∫[R² - r²]dx

• Outer Radius: Distance to furthest curve

• Inner Radius: Distance to nearest curve

3 Rotation About y-axis
Exercise 3
Find the volume of the solid generated by revolving the region bounded by x = y² and x = 2y about the y-axis.
Definitions:

Rotation About y-axis: Integrate with respect to y, using x-values as radii

Region
x = y², x = 2y
Axis
y-axis
Method
Washer
Step 1: Find intersection points

\( y^2 = 2y \)

\( y^2 - 2y = 0 \)

\( y(y - 2) = 0 \)

Therefore: y = 0 or y = 2

Step 2: Determine which function is on the right

On [0, 2]: Test y = 1

x₁ = (1)² = 1

x₂ = 2(1) = 2

So 2y ≥ y² on [0, 2]

Step 3: Identify the axis of rotation

The region is rotated about the y-axis (x = 0)

Step 4: Determine the method

Since the region is bounded by two curves, we use the washer method

Step 5: Find the outer and inner radii

Outer radius: R(y) = 2y (distance from y-axis to rightmost curve)

Inner radius: r(y) = y² (distance from y-axis to leftmost curve)

Step 6: Set up the integral

\( V = \pi \int_0^2 ([R(y)]^2 - [r(y)]^2) \, dy = \pi \int_0^2 ((2y)^2 - (y^2)^2) \, dy \)

\( V = \pi \int_0^2 (4y^2 - y^4) \, dy \)

Step 7: Evaluate the integral

\( V = \pi \int_0^2 (4y^2 - y^4) \, dy = \pi[\frac{4y^3}{3} - \frac{y^5}{5}]_0^2 \)

\( = \pi[\frac{4(8)}{3} - \frac{32}{5}] = \pi[\frac{32}{3} - \frac{32}{5}] \)

\( = \pi[\frac{160 - 96}{15}] = \frac{64\pi}{15} \)

Volume = 64π/15 cubic units
Final answer:

The volume of the solid is 64π/15 cubic units

Applied rules:

• Rotation about y-axis: V = π∫[R(y)]²dy or V = π∫[R² - r²]dy

• Distance to y-axis: x-value is the radius

• Integration: ∫y^n dy = y^(n+1)/(n+1)

Key Formulas and Methods
\( V = \pi \int_a^b [R(x)]^2 \, dx \text{ or } V = \pi \int_c^d [R(y)]^2 \, dy \)
Disk Method
Disk
\( V = \pi \int_a^b [R(x)]^2 \, dx \)
Rotation about x-axis
Washer
\( V = \pi \int_a^b ([R(x)]^2 - [r(x)]^2) \, dx \)
Hollow solid
Y-Axis
\( V = \pi \int_c^d [R(y)]^2 \, dy \)
Rotation about y-axis
Key Definitions:

Axis of Rotation: The line about which the region is revolved

Radius: Distance from axis of rotation to the curve

Outer Radius: Distance to the furthest curve

Inner Radius: Distance to the nearest curve

Disk/Washer Decision Tree:
  1. Identify axis of rotation: x-axis, y-axis, or other line
  2. Determine variable of integration: x for rotation about y-axis, y for rotation about x-axis
  3. Count boundary curves: One curve = disk, Two curves = washer
  4. Find radius functions: Distance from axis to each curve
  5. Set up integral: Apply appropriate formula
Tip 1: Always sketch the region before starting to visualize the solid.
Tip 2: The radius is always the distance from the axis of rotation to the curve.
Tip 3: For rotation about y-axis, integrate with respect to y; for x-axis, integrate with respect to x.
Tip 4: If the axis of rotation is not the coordinate axis, adjust the radius calculation accordingly.
Exercise Solutions: 4 to 5
4 Rotation About Other Lines
Exercise 4
Find the volume of the solid generated by revolving the region bounded by y = x² and y = 4 about the line y = 6.
Definitions:

Rotation About Horizontal Line: Adjust radius calculation by subtracting the axis value

Region
y = x², y = 4
Axis
y = 6
Method
Washer
Step 1: Find intersection points

\( x^2 = 4 \)

Therefore: x = -2 or x = 2

Step 2: Identify the axis of rotation

The region is rotated about the line y = 6

Step 3: Determine the method

Since the region is bounded by two horizontal lines, we use the washer method

Step 4: Find the outer and inner radii

Outer radius: R(x) = |6 - x²| = 6 - x² (since x² ≤ 4 ≤ 6)

Inner radius: r(x) = |6 - 4| = 2 (distance from y = 6 to y = 4)

Step 5: Set up the integral

\( V = \pi \int_{-2}^{2} ([R(x)]^2 - [r(x)]^2) \, dx = \pi \int_{-2}^{2} [(6 - x^2)^2 - 2^2] \, dx \)

\( V = \pi \int_{-2}^{2} [(36 - 12x^2 + x^4) - 4] \, dx = \pi \int_{-2}^{2} (32 - 12x^2 + x^4) \, dx \)

Step 6: Evaluate the integral

\( V = \pi \int_{-2}^{2} (32 - 12x^2 + x^4) \, dx \)

Since the integrand is even, we can write:

\( V = 2\pi \int_0^{2} (32 - 12x^2 + x^4) \, dx = 2\pi[32x - 4x^3 + \frac{x^5}{5}]_0^{2} \)

Step 7: Continue evaluation

\( V = 2\pi[32(2) - 4(8) + \frac{32}{5}] = 2\pi[64 - 32 + \frac{32}{5}] \)

\( = 2\pi[32 + \frac{32}{5}] = 2\pi[\frac{160 + 32}{5}] = 2\pi \cdot \frac{192}{5} = \frac{384\pi}{5} \)

Volume = 384π/5 cubic units
Final answer:

The volume of the solid is 384π/5 cubic units

Applied rules:

• Non-coordinate axis: Radius = |axis value - curve value|

• Even function property: ∫[-a,a] f(x)dx = 2∫[0,a] f(x)dx

• Algebraic expansion: (a-b)² = a² - 2ab + b²

5 Complex Region
Exercise 5
Find the volume of the solid generated by revolving the region bounded by y = e^x, y = 1, and x = 2 about the line x = 3.
Definitions:

Rotation About Vertical Line: Integrate with respect to y, using horizontal distances

Region
y = e^x, y = 1, x = 2
Axis
x = 3
Method
Washer
Step 1: Determine the bounds of integration

At x = 0: y = e⁰ = 1

At x = 2: y = e²

So y ranges from 1 to e²

Step 2: Express x in terms of y

From y = eˣ: x = ln(y)

Step 3: Identify the axis of rotation

The region is rotated about the line x = 3

Step 4: Find the outer and inner radii

For a given y-value, the region extends from x = ln(y) to x = 2

Outer radius: R(y) = |3 - ln(y)| = 3 - ln(y) (since ln(y) ≤ ln(e²) = 2 < 3)

Inner radius: r(y) = |3 - 2| = 1 (distance from x = 3 to x = 2)

Step 5: Set up the integral

\( V = \pi \int_1^{e^2} ([R(y)]^2 - [r(y)]^2) \, dy = \pi \int_1^{e^2} [(3 - \ln(y))^2 - 1^2] \, dy \)

\( V = \pi \int_1^{e^2} [(9 - 6\ln(y) + (\ln(y))^2) - 1] \, dy = \pi \int_1^{e^2} [8 - 6\ln(y) + (\ln(y))^2] \, dy \)

Step 6: Evaluate the integral

We need: ∫ln(y)dy = yln(y) - y and ∫[ln(y)]²dy = y[ln(y)]² - 2yln(y) + 2y

\( V = \pi[8y - 6(y\ln(y) - y) + (y(\ln(y))^2 - 2y\ln(y) + 2y)]_1^{e^2} \)

\( = \pi[8y - 6y\ln(y) + 6y + y(\ln(y))^2 - 2y\ln(y) + 2y]_1^{e^2} \)

\( = \pi[y(\ln(y))^2 - 8y\ln(y) + 16y]_1^{e^2} \)

Step 7: Evaluate at bounds

At y = e²: (e²)(2)² - 8(e²)(2) + 16(e²) = 4e² - 16e² + 16e² = 4e²

At y = 1: (1)(0)² - 8(1)(0) + 16(1) = 0 - 0 + 16 = 16

\( V = \pi[4e^2 - 16] = 4\pi(e^2 - 4) \)

Volume = 4π(e² - 4) cubic units
Final answer:

The volume of the solid is 4π(e² - 4) cubic units

Applied rules:

• Integration by parts: ∫ln(y)dy = yln(y) - y

• Logarithmic integration: ∫[ln(y)]²dy requires repeated integration by parts

• Inverse functions: y = eˣ ↔ x = ln(y)

Disk and Washer Concepts
\( V = \lim_{n \to \infty} \sum_{i=1}^{n} \pi [R(x_i)]^2 \Delta x = \pi \int_a^b [R(x)]^2 \, dx \)
Riemann Sum Approach
Key concepts:

Solid of Revolution: A 3D solid created by rotating a 2D region about an axis

Disk: A thin circular slice of the solid when there's no hole

Washer: A thin circular slice with a hole in the middle

Decision process:
  1. Sketch the region: Visualize the area to be revolved
  2. Identify rotation axis: Determine the line of rotation
  3. Choose variable: x for rotation about y-axis, y for rotation about x-axis
  4. Determine method: Disk if touching axis, washer if bounded by two curves
  5. Find radii: Calculate distances from axis to curves
Tip 1: The radius is always the distance from the axis of rotation to the curve.
Tip 2: For rotation about x = a, radius = |x - a|.
Tip 3: For rotation about y = b, radius = |y - b|.
Tip 4: Exploit symmetry when the integrand is even to simplify calculations.
Common errors: Incorrect radius calculation, wrong integration bounds, confusing disk/washer method.
Exam preparation: Practice with various axes of rotation and function types.
Essential formulas:

• Disk: V = π∫[R(x)]²dx or V = π∫[R(y)]²dy

• Washer: V = π∫[R² - r²]dx or V = π∫[R² - r²]dy

• Rotation about x = a: R = |x - a|

• Rotation about y = b: R = |y - b|

• Integration: ∫ln(x)dx = xln(x) - x

Questions & Answers

Question: How do I decide whether to use the disk method or the washer method?

Answer: The decision depends on the geometry after rotation:

  • Disk Method: Use when the region touches the axis of rotation, creating a solid without holes
    • Region is bounded by one curve and the axis of rotation
    • Formula: V = π∫[R(x)]²dx
  • Washer Method: Use when the region doesn't touch the axis of rotation, creating a hollow solid
    • Region is bounded by two curves, creating an inner and outer radius
    • Formula: V = π∫[R² - r²]dx

Essentially, if there's a gap between the region and the axis of rotation, you'll have a hole and need the washer method.

Question: When rotating about a line other than the coordinate axes, how do I calculate the radius?

Answer: The radius is always the perpendicular distance from the axis of rotation to the curve:

  • Rotation about vertical line x = a: Radius = |x - a|
  • Rotation about horizontal line y = b: Radius = |y - b|

For example, if rotating about x = 3, the radius from a point (x, y) to the line x = 3 is |x - 3|. If rotating about y = -2, the radius from a point (x, y) to the line y = -2 is |y - (-2)| = |y + 2|.

Always take the absolute value to ensure a positive radius.

Question: How do I determine whether to integrate with respect to x or y when using the disk/washer method?

Answer: The choice depends on the axis of rotation:

  • Rotation about horizontal line (x-axis or y = constant): Integrate with respect to x
  • Rotation about vertical line (y-axis or x = constant): Integrate with respect to y

However, there's an important exception: when it's easier to express the region in terms of the other variable. For example, if rotating about the y-axis but the region is more easily expressed as x = f(y), then integrate with respect to y.

The key is to make sure your radius functions are expressed in terms of the same variable as the integration variable.