Work, Hydrostatic Pressure, and Physical Applications: Comprehensive Analysis and Solutions

Master physical applications using integration through 5 detailed exercises covering work, hydrostatic pressure, and other applications with comprehensive solutions.

Exercise Solutions: 1 to 3
1 Work Against Gravity
Exercise 1
A 50 kg bucket is lifted from the ground to a height of 20 m by a rope that weighs 0.5 kg/m. The bucket initially contains 20 kg of sand but leaks at a rate of 0.1 kg/m as it's being lifted. Find the total work done.
Definitions:

Work Formula: \( W = \int_a^b F(x) \, dx \) where F(x) is the force required at position x

Gravitational Force: F = mg where g = 9.8 m/s²

Solution Method:
  1. Identify all forces contributing to the total force
  2. Express each force as a function of position
  3. Sum all forces to get total force function
  4. Set up and evaluate the work integral
Bucket Mass
50 kg
Rope Weight
0.5 kg/m
Sand Loss
0.1 kg/m
Step 1: Identify forces at height x

At height x meters above ground:

• Bucket weight: 50 × 9.8 = 490 N (constant)

• Sand remaining: 20 - 0.1x kg, so force = (20 - 0.1x) × 9.8 N

• Rope remaining: (20 - x) m, so force = (20 - x) × 0.5 × 9.8 N

Step 2: Express total force function

\( F(x) = 490 + (20 - 0.1x) \times 9.8 + (20 - x) \times 0.5 \times 9.8 \)

\( = 490 + 196 - 0.98x + 98 - 4.9x \)

\( = 784 - 5.88x \) Newtons

Step 3: Set up the work integral

\( W = \int_0^{20} F(x) \, dx = \int_0^{20} (784 - 5.88x) \, dx \)

Step 4: Evaluate the integral

\( W = \int_0^{20} (784 - 5.88x) \, dx = [784x - 2.94x^2]_0^{20} \)

\( = (784 \times 20 - 2.94 \times 400) - (0) \)

\( = 15680 - 1176 = 14504 \) Joules

Step 5: Break down work components

• Work on bucket: 490 × 20 = 9800 J

• Work on sand: ∫₀²⁰ (196 - 0.98x)dx = 3528 J

• Work on rope: ∫₀²⁰ (98 - 4.9x)dx = 1176 J

Total: 9800 + 3528 + 1176 = 14504 J

Total work = 14,504 Joules
Final answer:

The total work done is 14,504 Joules

Applied rules:

• Work Formula: W = ∫F(x)dx

• Force-Mass-Gravity: F = mg

• Integration: ∫(ax + b)dx = ax²/2 + bx

2 Hydrostatic Pressure
Exercise 2
A rectangular plate with width 4 m and height 3 m is submerged vertically in water with its top edge at a depth of 2 m. Find the total hydrostatic force on the plate. (Use ρ = 1000 kg/m³ and g = 9.8 m/s²)
Definitions:

Hydrostatic Pressure: \( P = \rho gh \) where h is depth below surface

Hydrostatic Force: \( F = \int P \, dA = \int \rho gh \, dA \)

Plate Dimensions
4m × 3m
Top Depth
2 m
Bottom Depth
5 m
Step 1: Set up coordinate system

Place origin at water surface, with positive y-axis pointing downward

Top edge of plate: y = 2 m

Bottom edge of plate: y = 5 m

Step 2: Express pressure at depth y

Pressure at depth y: \( P(y) = \rho g y = 1000 \times 9.8 \times y = 9800y \) Pa

Step 3: Set up the force integral

Consider a horizontal strip of width 4 m and thickness dy at depth y

Area of strip: dA = 4 dy

Force on strip: dF = P(y) × dA = 9800y × 4 dy = 39200y dy

\( F = \int_2^5 39200y \, dy \)

Step 4: Evaluate the integral

\( F = \int_2^5 39200y \, dy = 39200 \int_2^5 y \, dy = 39200 \left[\frac{y^2}{2}\right]_2^5 \)

\( = 39200 \left[\frac{25}{2} - \frac{4}{2}\right] = 39200 \times \frac{21}{2} = 39200 \times 10.5 = 411,600 \) N

Step 5: Verify using average pressure

Average depth: (2 + 5)/2 = 3.5 m

Average pressure: P_avg = ρg(3.5) = 1000 × 9.8 × 3.5 = 34,300 Pa

Plate area: A = 4 × 3 = 12 m²

F = P_avg × A = 34,300 × 12 = 411,600 N ✓

Total hydrostatic force = 411,600 N
Final answer:

The total hydrostatic force on the plate is 411,600 Newtons

Applied rules:

• Hydrostatic Pressure: P = ρgh

• Force Calculation: F = ∫P dA

• Integration: ∫y dy = y²/2

3 Work to Pump Liquid
Exercise 3
A conical tank with height 6 m and base radius 3 m is filled with water to a depth of 4 m. Find the work required to pump all the water to the top of the tank. (Use ρ = 1000 kg/m³ and g = 9.8 m/s²)
Definitions:

Work to Pump Liquid: \( W = \int \rho g V_{slice} \times \text{distance lifted} \, dy \)

Tank Dimensions
h = 6m, r = 3m
Water Depth
4 m
Liquid Density
ρ = 1000 kg/m³
Step 1: Set up coordinate system

Place origin at the vertex of the cone (bottom), with positive y-axis pointing upward

Tank extends from y = 0 to y = 6

Water occupies region from y = 0 to y = 4

Step 2: Find radius at height y

By similar triangles: r/y = 3/6, so r = y/2

Step 3: Express volume of horizontal slice

At height y, cross-sectional area = πr² = π(y/2)² = πy²/4

Volume of slice of thickness dy: dV = (πy²/4) dy

Step 4: Determine distance to lift slice

A slice at height y needs to be lifted to height 6

Distance to lift = 6 - y

Step 5: Set up the work integral

\( W = \int_0^4 \rho g \cdot \text{volume} \cdot \text{distance} \, dy = \int_0^4 1000 \times 9.8 \times \frac{\pi y^2}{4} \times (6-y) \, dy \)

\( = 2450\pi \int_0^4 y^2(6-y) \, dy = 2450\pi \int_0^4 (6y^2 - y^3) \, dy \)

Step 6: Evaluate the integral

\( W = 2450\pi \int_0^4 (6y^2 - y^3) \, dy = 2450\pi \left[2y^3 - \frac{y^4}{4}\right]_0^4 \)

\( = 2450\pi \left[2(64) - \frac{256}{4}\right] = 2450\pi [128 - 64] = 2450\pi \times 64 = 156,800\pi \)

Step 7: Calculate numerical value

\( W = 156,800\pi \approx 156,800 \times 3.14159 \approx 492,600 \) Joules

Work = 156,800π ≈ 492,600 Joules
Final answer:

The work required to pump all water to the top is 156,800π ≈ 492,600 Joules

Applied rules:

• Pumping Work: W = ∫ρgV(distance)dy

• Similar Triangles: For conical containers

• Integration: ∫(ax² - bx³)dx = ax³/3 - bx⁴/4

Key Formulas and Methods
\( W = \int_a^b F(x) \, dx \text{, } F = \int P \, dA \text{, } P = \rho gh \)
Physical Application Formulas
Work
\( W = \int_a^b F(x) \, dx \)
Force-distance integration
Pressure
\( P = \rho gh \)
Depth-dependent pressure
Force
\( F = \int P \, dA \)
Pressure-area integration
Key Definitions:

Work: Energy transferred when a force acts through a distance

Hydrostatic Pressure: Pressure exerted by a fluid at rest due to gravity

Force: Product of pressure and area in fluid mechanics

Physical Application Process:
  1. Model the situation: Identify the physical setup and relevant variables
  2. Set up coordinate system: Define position variables appropriately
  3. Express forces/pressures: Write expressions for physical quantities
  4. Set up integrals: Apply appropriate physical formulas
  5. Evaluate: Compute the definite integrals
Tip 1: Always consider all contributing masses/forces in work problems.
Tip 2: In hydrostatic problems, pressure increases linearly with depth.
Tip 3: For pumping problems, calculate the distance each slice must travel.
Tip 4: Check units throughout the calculation to ensure consistency.
Exercise Solutions: 4 to 5
4 Hooke's Law Application
Exercise 4
A spring has a natural length of 20 cm. A force of 30 N is required to stretch it to 35 cm. Find the work done in stretching the spring from 25 cm to 30 cm.
Definitions:

Hooke's Law: \( F(x) = kx \) where x is displacement from equilibrium and k is spring constant

Natural Length
20 cm
Force at 35cm
30 N
Stretch Range
25cm to 30cm
Step 1: Find the spring constant k

When stretched to 35 cm: displacement = 35 - 20 = 15 cm = 0.15 m

Using Hooke's Law: F = kx

30 = k(0.15)

Therefore: k = 30/0.15 = 200 N/m

Step 2: Express force function

Force required to stretch spring x meters beyond natural length: F(x) = 200x

Step 3: Determine integration limits in terms of displacement

At 25 cm: displacement = 25 - 20 = 5 cm = 0.05 m

At 30 cm: displacement = 30 - 20 = 10 cm = 0.10 m

Step 4: Set up the work integral

\( W = \int_{0.05}^{0.10} F(x) \, dx = \int_{0.05}^{0.10} 200x \, dx \)

Step 5: Evaluate the integral

\( W = \int_{0.05}^{0.10} 200x \, dx = 200 \int_{0.05}^{0.10} x \, dx = 200 \left[\frac{x^2}{2}\right]_{0.05}^{0.10} \)

\( = 100[x^2]_{0.05}^{0.10} = 100[(0.10)^2 - (0.05)^2] \)

\( = 100[0.01 - 0.0025] = 100(0.0075) = 0.75 \) Joules

Step 6: Alternative verification

Work = Δ(PE) = (1/2)k(x₂² - x₁²) = (1/2)(200)(0.10² - 0.05²) = 100(0.01 - 0.0025) = 0.75 J ✓

Work = 0.75 Joules
Final answer:

The work done in stretching the spring is 0.75 Joules

Applied rules:

• Hooke's Law: F = kx

• Elastic Potential Energy: PE = (1/2)kx²

• Work-Energy: W = ∫F(x)dx = ΔPE

5 Trapezoidal Tank Problem
Exercise 5
A trapezoidal tank has dimensions: height 4 m, top width 6 m, bottom width 2 m, and length 8 m. The tank is filled with oil (density 800 kg/m³) to a depth of 3 m. Find the work required to pump all oil to the top of the tank.
Definitions:

Work to Pump Liquid: Account for varying cross-sectional area in non-uniform containers

Tank Dimensions
h=4m, top=6m, bottom=2m, length=8m
Oil Depth
3 m
Oil Density
ρ = 800 kg/m³
Step 1: Set up coordinate system

Place origin at bottom of tank, with positive y-axis pointing upward

Tank extends from y = 0 to y = 4

Oil occupies region from y = 0 to y = 3

Step 2: Find width at height y

At y = 0 (bottom): width = 2 m

At y = 4 (top): width = 6 m

Width increases linearly: w(y) = 2 + (6-2)(y/4) = 2 + y

Step 3: Express cross-sectional area at height y

At height y: cross-sectional area = width × length = (2 + y) × 8 = 8(2 + y)

Step 4: Express volume of horizontal slice

Volume of slice of thickness dy: dV = 8(2 + y) dy

Step 5: Determine distance to lift slice

A slice at height y needs to be lifted to height 4

Distance to lift = 4 - y

Step 6: Set up the work integral

\( W = \int_0^3 \rho g \cdot \text{volume} \cdot \text{distance} \, dy = \int_0^3 800 \times 9.8 \times 8(2+y) \times (4-y) \, dy \)

\( = 62720 \int_0^3 (2+y)(4-y) \, dy = 62720 \int_0^3 (8 - 2y + 4y - y^2) \, dy \)

\( = 62720 \int_0^3 (8 + 2y - y^2) \, dy \)

Step 7: Evaluate the integral

\( W = 62720 \int_0^3 (8 + 2y - y^2) \, dy = 62720 \left[8y + y^2 - \frac{y^3}{3}\right]_0^3 \)

\( = 62720 \left[8(3) + 9 - \frac{27}{3}\right] = 62720 \left[24 + 9 - 9\right] = 62720 \times 24 = 1,505,280 \) Joules

Step 8: Calculate numerical value

\( W = 1,505,280 \) Joules ≈ 1.51 MJ

Work = 1,505,280 Joules
Final answer:

The work required to pump all oil to the top is 1,505,280 Joules

Applied rules:

• Linear Variation: For trapezoidal cross-sections

• Volume Calculation: Area × thickness

• Integration: ∫(a + by - cy²)dy = ay + by²/2 - cy³/3

Physical Applications Concepts
\( W = \lim_{n \to \infty} \sum_{i=1}^{n} F(x_i) \Delta x = \int_a^b F(x) \, dx \)
Riemann Sum Approach
Key concepts:

Work: Energy transfer through force acting over distance

Hydrostatic Pressure: Pressure in fluids at rest due to gravitational force

Fluid Mechanics: Application of calculus to fluid systems

Problem-solving approach:
  1. Visualize: Draw the physical situation clearly
  2. Model: Identify the relevant physical laws
  3. Coordinate: Set up appropriate coordinate system
  4. Express: Write force, pressure, or other quantities as functions
  5. Integrate: Apply appropriate integral formula
Tip 1: Always identify the variable of integration based on the physical setup.
Tip 2: In hydrostatic problems, pressure increases linearly with depth below surface.
Tip 3: For pumping problems, each horizontal slice travels a different distance.
Tip 4: Check that your answer has the correct units and reasonable magnitude.
Common errors: Incorrect coordinate system, wrong integration limits, inconsistent units, ignoring varying quantities.
Exam preparation: Practice with various container shapes and physical scenarios.
Essential formulas:

• Work: W = ∫F(x)dx

• Hydrostatic Pressure: P = ρgh

• Hydrostatic Force: F = ∫P dA

• Hooke's Law: F = kx

• Pumping Work: W = ∫ρgV(distance)dy

Questions & Answers

Question: How do I determine the correct coordinate system for physical application problems?

Answer: The coordinate system choice depends on the problem type:

  • Work problems: Usually measure distance from starting position
  • Hydrostatic problems: Measure depth from fluid surface (positive downward)
  • Pumping problems: Measure height from bottom of container
  • Spring problems: Measure displacement from equilibrium position

Choose the system that makes the mathematical expressions simplest. The variable of integration should correspond to the changing dimension in the problem.

Question: In hydrostatic pressure problems, when should I use the average pressure method versus integration?

Answer: The choice depends on the situation:

  • Use average pressure when:
    • Surface is horizontal (same depth everywhere)
    • Quick approximation is sufficient
    • Pressure variation is uniform across the surface
  • Use integration when:
    • Surface is vertical (depth varies)
    • Surface is curved or irregular
    • High accuracy is required

The average pressure method works well for rectangular surfaces with horizontal orientation, but integration is necessary for vertical or tilted surfaces.

Question: How do I handle problems where multiple physical effects contribute to the total force or work?

Answer: Use the principle of superposition:

  1. Identify all contributing forces: List each physical effect separately
  2. Express each contribution: Write mathematical expressions for each
  3. Sum the contributions: Add forces or integrate the sum
  4. Integrate the total: Evaluate the combined integral

For example, in the bucket problem: bucket weight + sand weight + rope weight. Each contributes a different function of position that must be summed before integration.