Solved Exercises on Logistic Growth Models in Calculus 2

Master logistic growth models: understand population dynamics, carrying capacity, and saturation through these 3 detailed exercises.

Solution: Exercises 1 to 3
1 Basic logistic model
Exercise 1
A population follows the logistic model: \(\frac{dP}{dt} = 0.04P(1 - \frac{P}{1000})\)
If the initial population is 50, find:
a) The carrying capacity
b) The logistic equation solution P(t)
c) The population after 10 years
d) When the population reaches 500
Definition:

Logistic growth model: A mathematical model where growth is proportional to both the current population and the remaining capacity. The differential equation is \(\frac{dP}{dt} = kP(1 - \frac{P}{M})\), where k is the growth rate and M is the carrying capacity.

Logistic growth method:
  1. Identify parameters from the equation: growth rate k and carrying capacity M
  2. Use the standard solution: \(P(t) = \frac{M}{1 + Ae^{-kt}}\) where \(A = \frac{M - P_0}{P_0}\)
  3. Substitute initial condition to find A
  4. Answer questions using the complete model
Model Parameters
\(k = 0.04\), \(M = 1000\), \(P_0 = 50\)
General Solution
\(P(t) = \frac{M}{1 + Ae^{-kt}}\)
Step 1: Identify the carrying capacity

From the equation \(\frac{dP}{dt} = 0.04P(1 - \frac{P}{1000})\):

The carrying capacity is \(M = 1000\)

Step 2: Find the parameter A

Using \(A = \frac{M - P_0}{P_0}\) with \(M = 1000\) and \(P_0 = 50\):

\(A = \frac{1000 - 50}{50} = \frac{950}{50} = 19\)

Step 3: Write the complete solution

\(P(t) = \frac{1000}{1 + 19e^{-0.04t}}\)

Step 4: Calculate population after 10 years

\(P(10) = \frac{1000}{1 + 19e^{-0.04 \cdot 10}} = \frac{1000}{1 + 19e^{-0.4}}\)

\(P(10) = \frac{1000}{1 + 19 \cdot 0.6703} = \frac{1000}{1 + 12.736} = \frac{1000}{13.736} \approx 72.8\)

Step 5: Find when population reaches 500

Set \(P(t) = 500\):

\(500 = \frac{1000}{1 + 19e^{-0.04t}}\)

\(1 + 19e^{-0.04t} = \frac{1000}{500} = 2\)

\(19e^{-0.04t} = 1\)

\(e^{-0.04t} = \frac{1}{19}\)

\(-0.04t = \ln(\frac{1}{19}) = -\ln(19)\)

\(t = \frac{\ln(19)}{0.04} \approx \frac{2.944}{0.04} \approx 73.6\) years

a) M = 1000, b) \(P(t) = \frac{1000}{1 + 19e^{-0.04t}}\), c) ~73, d) ~73.6 years
Final answer:

a) The carrying capacity is 1000
b) The population at time t is \(P(t) = \frac{1000}{1 + 19e^{-0.04t}}\)
c) After 10 years, the population is approximately 73
d) The population reaches 500 after approximately 73.6 years

Applied rules:

• Logistic equation: \(\frac{dP}{dt} = kP(1 - \frac{P}{M})\)

• Solution formula: \(P(t) = \frac{M}{1 + Ae^{-kt}}\)

• Parameter A: \(A = \frac{M - P_0}{P_0}\)

2 Population dynamics
Exercise 2
A fish population in a lake is modeled by \(\frac{dP}{dt} = 0.05P(1 - \frac{P}{5000})\).
Initially, there are 200 fish. Find:
a) The maximum sustainable population
b) The time when the population grows fastest
c) The population when growth rate is maximum
d) The population after 5 years
Definition:

Maximum growth rate: For the logistic model \(\frac{dP}{dt} = kP(1 - \frac{P}{M})\), the maximum growth rate occurs when \(P = \frac{M}{2}\) (half the carrying capacity).

Model Parameters
\(k = 0.05\), \(M = 5000\), \(P_0 = 200\)
General Solution
\(P(t) = \frac{M}{1 + Ae^{-kt}}\)
Step 1: Identify the maximum sustainable population

The carrying capacity M = 5000 is the maximum sustainable population.

Step 2: Find the parameter A

Using \(A = \frac{M - P_0}{P_0}\) with \(M = 5000\) and \(P_0 = 200\):

\(A = \frac{5000 - 200}{200} = \frac{4800}{200} = 24\)

Step 3: Write the complete solution

\(P(t) = \frac{5000}{1 + 24e^{-0.05t}}\)

Step 4: Find when growth rate is maximum

Maximum growth rate occurs when \(P = \frac{M}{2} = \frac{5000}{2} = 2500\)

Set \(P(t) = 2500\):

\(2500 = \frac{5000}{1 + 24e^{-0.05t}}\)

\(1 + 24e^{-0.05t} = \frac{5000}{2500} = 2\)

\(24e^{-0.05t} = 1\)

\(e^{-0.05t} = \frac{1}{24}\)

\(t = \frac{\ln(24)}{0.05} \approx \frac{3.178}{0.05} \approx 63.6\) years

Step 5: Calculate population after 5 years

\(P(5) = \frac{5000}{1 + 24e^{-0.05 \cdot 5}} = \frac{5000}{1 + 24e^{-0.25}}\)

\(P(5) = \frac{5000}{1 + 24 \cdot 0.7788} = \frac{5000}{1 + 18.691} = \frac{5000}{19.691} \approx 254\)

a) M = 5000, b) ~63.6 years, c) P = 2500, d) ~254 fish
Final answer:

a) The maximum sustainable population is 5000 fish
b) The population grows fastest after approximately 63.6 years
c) The population is 2500 fish when growth rate is maximum
d) After 5 years, there are approximately 254 fish

Applied rules:

• Maximum growth rate: Occurs at \(P = \frac{M}{2}\)

• Rate of change: \(\frac{dP}{dt} = kP(1 - \frac{P}{M})\)

• Carrying capacity: Maximum sustainable population M

3 Disease spread model
Exercise 3
In a community of 1000 people, a flu spreads according to \(\frac{dI}{dt} = 0.001I(1000 - I)\), where I is the number of infected people.
Initially, 1 person is infected. Find:
a) The modified logistic equation parameters
b) The number of infected people after 10 days
c) When the infection rate is highest
d) The number of infected people at peak infection rate
Definition:

Disease spread model: A variant of the logistic model where the rate of spread is proportional to both the number of infected individuals and the number of susceptible individuals. The equation \(\frac{dI}{dt} = kI(S - I)\) can be rewritten in standard logistic form.

Original Equation
\(\frac{dI}{dt} = 0.001I(1000 - I)\)
Standard Form
\(\frac{dI}{dt} = 0.001 \cdot 1000 \cdot I(1 - \frac{I}{1000})\)
Step 1: Convert to standard logistic form

\(\frac{dI}{dt} = 0.001I(1000 - I) = 0.001 \cdot 1000 \cdot I(1 - \frac{I}{1000}) = 1 \cdot I(1 - \frac{I}{1000})\)

So \(k = 1\) and \(M = 1000\)

Step 2: Find the parameter A

With \(M = 1000\) and \(I_0 = 1\):

\(A = \frac{M - I_0}{I_0} = \frac{1000 - 1}{1} = 999\)

Step 3: Write the complete solution

\(I(t) = \frac{1000}{1 + 999e^{-t}}\)

Step 4: Calculate infections after 10 days

\(I(10) = \frac{1000}{1 + 999e^{-10}}\)

Since \(e^{-10} \approx 4.54 \times 10^{-5}\):

\(I(10) = \frac{1000}{1 + 999 \cdot 4.54 \times 10^{-5}} = \frac{1000}{1 + 0.0453} \approx \frac{1000}{1.0453} \approx 957\)

Step 5: Find when infection rate is highest

Maximum rate occurs when \(I = \frac{M}{2} = \frac{1000}{2} = 500\)

Set \(I(t) = 500\):

\(500 = \frac{1000}{1 + 999e^{-t}}\)

\(1 + 999e^{-t} = 2\)

\(999e^{-t} = 1\)

\(e^{-t} = \frac{1}{999}\)

\(t = \ln(999) \approx 6.91\) days

a) k = 1, M = 1000, b) ~957 people, c) ~6.91 days, d) 500 people
Final answer:

a) The standard logistic parameters are k = 1 and M = 1000
b) After 10 days, approximately 957 people are infected
c) The infection rate is highest after approximately 6.91 days
d) At peak infection rate, there are 500 infected people

Applied rules:

• Disease modeling: \(\frac{dI}{dt} = kI(S - I)\) where S is total population

• Conversion: Rewrite in standard form \(\frac{dI}{dt} = kSI(1 - \frac{I}{S})\)

• Peak infection: Occurs at \(I = \frac{S}{2}\)

Rules and methods, laws,...
\(\frac{dP}{dt} = kP(1 - \frac{P}{M})\)
Logistic Equation
Key definitions:

Logistic growth: Population growth that starts exponentially but slows as it approaches the carrying capacity.

Carrying capacity (M): The maximum population size that the environment can sustain indefinitely.

Growth rate (k): The intrinsic growth rate of the population when it's small relative to capacity.

Inflection point: The point where the growth rate is maximum, occurring at \(P = \frac{M}{2}\).

Complete methodology:
  1. Identify parameters: Extract k and M from the given differential equation
  2. Set up solution: Use \(P(t) = \frac{M}{1 + Ae^{-kt}}\)
  3. Find A: Use \(A = \frac{M - P_0}{P_0}\) with initial condition
  4. Answer questions: Use the complete model for calculations
  5. Verify results: Check if answers make biological/ecological sense
Tip 1: The maximum growth rate occurs at half the carrying capacity.
Tip 2: As t → ∞, P(t) → M (approaches carrying capacity).
Tip 3: The growth rate \(\frac{dP}{dt}\) is maximum at P = M/2.
Tip 4: Verify that your solution satisfies the initial condition.
Common errors: Confusing the roles of k and M, forgetting to convert equations to standard form.
Exam preparation: Practice with various contexts (population, disease, adoption).
Formulas to know by heart:

• Standard form: \(\frac{dP}{dt} = kP(1 - \frac{P}{M})\)

• Solution: \(P(t) = \frac{M}{1 + Ae^{-kt}}\) where \(A = \frac{M - P_0}{P_0}\)

• Max growth rate at: \(P = \frac{M}{2}\)

• Growth rate: \(\frac{dP}{dt} = kP(1 - \frac{P}{M})\)

Detailed Summary: Logistic Growth Models
\(\frac{dP}{dt} = kP(1 - \frac{P}{M})\)
Differential Equation
Standard Form
\(\frac{dP}{dt} = kP(1 - \frac{P}{M})\)
Parameters: k, M
Solution
\(P(t) = \frac{M}{1 + Ae^{-kt}}\)
where A = (M-P₀)/P₀
Max Growth
\(P = \frac{M}{2}\)
at inflection point
Core Concepts:

Logistic growth model: A mathematical model that describes how a population grows rapidly at first but then slows as it approaches the carrying capacity of the environment. The fundamental differential equation is \(\frac{dP}{dt} = kP(1 - \frac{P}{M})\), where k is the growth rate and M is the carrying capacity.

Carrying capacity (M): The maximum sustainable population size that the environment can support. As the population approaches M, the growth rate approaches zero.

Growth rate (k): The intrinsic growth rate parameter that determines how quickly the population approaches the carrying capacity.

Inflection point: The point on the logistic curve where the growth rate is maximum, occurring when the population reaches half the carrying capacity.

Detailed Solution Process:
  1. Model identification: Recognize the logistic form and identify parameters k and M.
  2. Standard form conversion: If necessary, rewrite the equation in standard form \(\frac{dP}{dt} = kP(1 - \frac{P}{M})\).
  3. Solution setup: Use the standard solution \(P(t) = \frac{M}{1 + Ae^{-kt}}\).
  4. Parameter calculation: Compute \(A = \frac{M - P_0}{P_0}\) using initial conditions.
  5. Model validation: Verify that the solution satisfies the initial condition.
  6. Analysis: Use the model to answer questions about growth rate, inflection points, etc.
Inflection Point: The fastest growth occurs when P = M/2, which is the inflection point of the curve.
Asymptotic Behavior: P(t) approaches M as t approaches infinity, but never exceeds it.
Concavity Change: The curve changes from concave up to concave down at P = M/2.
Initial Growth: For small P, the model behaves like exponential growth.
Applications: Population dynamics, epidemiology, market penetration, technology adoption.
Advantages: Realistic model that accounts for resource limitations.
Limitations: Assumes constant carrying capacity and growth rate.
Important Rules and Principles:

• Self-limiting growth: Growth rate decreases as population approaches carrying capacity.

• Maximum growth rate: Occurs at exactly half the carrying capacity.

• S-shaped curve: Characteristic sigmoid shape of logistic growth.

• Environmental constraints: Model incorporates resource limitations.

Questions & Answers

Question: Why does the maximum growth rate occur at exactly half the carrying capacity in logistic models?

Answer: This is a consequence of the mathematical structure of the logistic equation:

  • The growth rate is given by \(\frac{dP}{dt} = kP(1 - \frac{P}{M})\)
  • To find the maximum, we take the derivative with respect to P: \(\frac{d}{dP}\left[kP(1 - \frac{P}{M})\right] = k(1 - \frac{2P}{M})\)
  • Setting this equal to zero: \(k(1 - \frac{2P}{M}) = 0\)
  • This gives us: \(1 - \frac{2P}{M} = 0\), so \(\frac{2P}{M} = 1\), thus \(P = \frac{M}{2}\)

Intuitively, when the population is small, there's plenty of resources but few organisms to reproduce. When the population is large, there are many organisms but limited resources. The sweet spot is at half capacity, where there's a good balance of reproducing organisms and available resources.

Question: How do I handle logistic equations that aren't in the standard form, like \(\frac{dP}{dt} = kP(M - P)\)?

Answer: You can convert such equations to standard form by factoring:

  • Start with: \(\frac{dP}{dt} = kP(M - P)\)
  • Factor out M: \(\frac{dP}{dt} = kP \cdot M(1 - \frac{P}{M})\)
  • Combine constants: \(\frac{dP}{dt} = (kM)P(1 - \frac{P}{M})\)
  • This is now in standard form with effective growth rate \(k' = kM\)

So the standard solution still applies: \(P(t) = \frac{M}{1 + Ae^{-k'Mt}}\) where the new effective growth rate is \(kM\) instead of just \(k\).

Question: What's the significance of the inflection point in logistic growth models?

Answer: The inflection point has several important meanings:

  • Maximum growth rate: This is when the population is growing fastest
  • Concavity change: The curve changes from concave up to concave down
  • Midpoint: It occurs exactly at half the carrying capacity
  • Transition point: Marks the transition from accelerating to decelerating growth

In real-world applications, this is often the most critical point for management decisions. For example, in disease modeling, this is when the number of new cases is highest, and in population studies, it's when conservation efforts might be most critical.