Solved Exercises on Converting Between Polar and Cartesian Coordinates in Calculus 2

Master coordinate conversions: transforming between polar and Cartesian systems, distance calculations, angle determinations, and geometric interpretations through these 5 detailed exercises.

Key Concepts & Formulas
\(x = r\cos(\theta), y = r\sin(\theta)\)
Polar to Cartesian Conversion
\(r = \sqrt{x^2 + y^2}, \theta = \arctan\left(\frac{y}{x}\right)\)
Cartesian to Polar Conversion
Key definitions:

Cartesian coordinates: A point is represented as \((x, y)\) using horizontal and vertical distances from the origin

Polar coordinates: A point is represented as \((r, \theta)\) where \(r\) is the distance from origin and \(\theta\) is the angle from positive x-axis

Radial coordinate (r): Distance from the pole (origin), always non-negative

Azimuthal angle (θ): Angle measured counterclockwise from the polar axis (positive x-axis)

Conversion methods:
  1. Polar to Cartesian: Use \(x = r\cos(\theta)\), \(y = r\sin(\theta)\)
  2. Cartesian to Polar: Calculate \(r = \sqrt{x^2 + y^2}\), then \(\theta = \arctan\left(\frac{y}{x}\right)\) adjusting for quadrant
  3. Quadrant adjustment: Use the signs of x and y to determine correct \(\theta\)
  4. Special cases: Handle points on axes separately for accuracy
Tip 1: When converting to polar, always consider the quadrant to get the correct angle.
Tip 2: For points on the axes, use special angle values: 0, π/2, π, 3π/2.
Tip 3: Remember that \(\arctan(y/x)\) only returns values between -π/2 and π/2.
Tip 4: Check your conversion by converting back to ensure accuracy.
Common errors: Forgetting to adjust \(\theta\) for quadrants, miscalculating \(\arctan\), incorrect signs in calculations.
Exam preparation: Memorize conversion formulas, practice quadrant adjustments, know standard angles.
Essential formulas to know:

• Polar to Cartesian: \(x = r\cos(\theta)\), \(y = r\sin(\theta)\)

• Cartesian to Polar: \(r = \sqrt{x^2 + y^2}\), \(\theta = \arctan\left(\frac{y}{x}\right)\) (with quadrant adjustment)

• Quadrant adjustments:
QI: \(\theta = \arctan(y/x)\)
QII: \(\theta = \arctan(y/x) + \pi\)
QIII: \(\theta = \arctan(y/x) + \pi\)
QIV: \(\theta = \arctan(y/x) + 2\pi\)

Solution: Exercises 1 to 3
1 Cartesian to Polar Conversion
Exercise 1
Convert the Cartesian coordinates \((3, -3)\) to polar coordinates.
Definition:

Cartesian to Polar conversion: \(r = \sqrt{x^2 + y^2}\), \(\theta = \arctan\left(\frac{y}{x}\right)\) (adjusted for quadrant)

Solution method:
  1. Calculate the radial coordinate \(r\)
  2. Calculate the angle \(\theta\) using arctangent
  3. Adjust \(\theta\) based on the quadrant of the point
  4. Express the result as \((r, \theta)\)
Given
\((x,y) = (3, -3)\)
Calculate r
\(r = 3\sqrt{2}\)
Calculate θ
\(\theta = \frac{7\pi}{4}\)
Step 1: Calculate the radial coordinate

\(r = \sqrt{x^2 + y^2} = \sqrt{3^2 + (-3)^2} = \sqrt{9 + 9} = \sqrt{18} = 3\sqrt{2}\)

Step 2: Calculate the angle

\(\tan(\theta) = \frac{y}{x} = \frac{-3}{3} = -1\)

So \(\theta = \arctan(-1) = -\frac{\pi}{4}\)

Step 3: Adjust for quadrant

The point \((3, -3)\) is in the fourth quadrant (positive x, negative y)

Since \(\arctan(-1) = -\frac{\pi}{4}\) is negative, add \(2\pi\) to get a positive angle:

\(\theta = -\frac{\pi}{4} + 2\pi = \frac{7\pi}{4}\)

Step 4: Express in polar form

The polar coordinates are \((3\sqrt{2}, \frac{7\pi}{4})\)

\((3\sqrt{2}, \frac{7\pi}{4})\)
Final answer:

The polar coordinates are \((3\sqrt{2}, \frac{7\pi}{4})\).

Applied rules:

• Distance formula: \(r = \sqrt{x^2 + y^2}\)

• Arctangent function: \(\theta = \arctan\left(\frac{y}{x}\right)\)

• Quadrant adjustment: Add \(\pi\) or \(2\pi\) to get correct angle

2 Polar to Cartesian Conversion
Exercise 2
Convert the polar coordinates \((5, \frac{2\pi}{3})\) to Cartesian coordinates.
Definition:

Polar to Cartesian conversion: \(x = r\cos(\theta)\), \(y = r\sin(\theta)\)

Given
\((r,\theta) = (5, \frac{2\pi}{3})\)
Calculate x
\(x = -\frac{5}{2}\)
Calculate y
\(y = \frac{5\sqrt{3}}{2}\)
Step 1: Calculate x-coordinate

\(x = r\cos(\theta) = 5\cos\left(\frac{2\pi}{3}\right)\)

Since \(\cos\left(\frac{2\pi}{3}\right) = -\frac{1}{2}\)

\(x = 5 \cdot \left(-\frac{1}{2}\right) = -\frac{5}{2}\)

Step 2: Calculate y-coordinate

\(y = r\sin(\theta) = 5\sin\left(\frac{2\pi}{3}\right)\)

Since \(\sin\left(\frac{2\pi}{3}\right) = \frac{\sqrt{3}}{2}\)

\(y = 5 \cdot \frac{\sqrt{3}}{2} = \frac{5\sqrt{3}}{2}\)

Step 3: Express in Cartesian form

The Cartesian coordinates are \(\left(-\frac{5}{2}, \frac{5\sqrt{3}}{2}\right)\)

\(\left(-\frac{5}{2}, \frac{5\sqrt{3}}{2}\right)\)
Final answer:

The Cartesian coordinates are \(\left(-\frac{5}{2}, \frac{5\sqrt{3}}{2}\right)\).

Applied rules:

• Trigonometric values: \(\cos\left(\frac{2\pi}{3}\right) = -\frac{1}{2}\), \(\sin\left(\frac{2\pi}{3}\right) = \frac{\sqrt{3}}{2}\)

• Polar to Cartesian: \(x = r\cos(\theta)\), \(y = r\sin(\theta)\)

• Reference angles: \(\frac{2\pi}{3} = \pi - \frac{\pi}{3}\) is in the second quadrant

3 Special Case: Axes Points
Exercise 3
Convert the Cartesian coordinates \((0, -4)\) to polar coordinates.
Definition:

Points on axes: Special cases where \(x = 0\) or \(y = 0\) require direct angle determination

Given
\((x,y) = (0, -4)\)
Calculate r
\(r = 4\)
Calculate θ
\(\theta = \frac{3\pi}{2}\)
Step 1: Calculate the radial coordinate

\(r = \sqrt{x^2 + y^2} = \sqrt{0^2 + (-4)^2} = \sqrt{16} = 4\)

Step 2: Determine the angle

Since \(x = 0\) and \(y < 0\), the point lies on the negative y-axis

Points on the negative y-axis have \(\theta = \frac{3\pi}{2}\) (or equivalently \(-\frac{\pi}{2}\))

Step 3: Alternative approach

When \(x = 0\), we cannot use \(\arctan(y/x)\) since division by zero is undefined

Instead, determine the angle directly based on the location of the point

Step 4: Express in polar form

The polar coordinates are \((4, \frac{3\pi}{2})\)

\((4, \frac{3\pi}{2})\)
Final answer:

The polar coordinates are \((4, \frac{3\pi}{2})\).

Applied rules:

• Special case handling: When \(x = 0\), use axis location to determine \(\theta\)

• Axis angles: Positive x-axis: 0, positive y-axis: \(\frac{\pi}{2}\), negative x-axis: \(\pi\), negative y-axis: \(\frac{3\pi}{2}\)

• Distance formula: \(r = \sqrt{x^2 + y^2}\) works for all cases

Solution: Exercises 4 to 5
4 Verification Problem
Exercise 4
Convert the polar coordinates \((\sqrt{2}, \frac{5\pi}{4})\) to Cartesian coordinates, then convert back to polar coordinates to verify the result.
Definition:

Verification process: Converting back and forth should yield the original coordinates

Original
\((\sqrt{2}, \frac{5\pi}{4})\)
To Cartesian
\((-1, -1)\)
Back to Polar
\((\sqrt{2}, \frac{5\pi}{4})\)
Step 1: Convert polar to Cartesian

\(x = r\cos(\theta) = \sqrt{2}\cos\left(\frac{5\pi}{4}\right)\)

\(\cos\left(\frac{5\pi}{4}\right) = -\frac{\sqrt{2}}{2}\)

\(x = \sqrt{2} \cdot \left(-\frac{\sqrt{2}}{2}\right) = -\frac{2}{2} = -1\)

Step 2: Calculate y-coordinate

\(y = r\sin(\theta) = \sqrt{2}\sin\left(\frac{5\pi}{4}\right)\)

\(\sin\left(\frac{5\pi}{4}\right) = -\frac{\sqrt{2}}{2}\)

\(y = \sqrt{2} \cdot \left(-\frac{\sqrt{2}}{2}\right) = -\frac{2}{2} = -1\)

Step 3: Now convert back to polar

From \((-1, -1)\): \(r = \sqrt{(-1)^2 + (-1)^2} = \sqrt{2}\)

\(\tan(\theta) = \frac{-1}{-1} = 1\), so \(\arctan(1) = \frac{\pi}{4}\)

Step 4: Adjust for quadrant

The point \((-1, -1)\) is in the third quadrant

Since \(\arctan(1) = \frac{\pi}{4}\) is in the first quadrant, add \(\pi\):

\(\theta = \frac{\pi}{4} + \pi = \frac{5\pi}{4}\)

Step 5: Verify the result

We started with \((\sqrt{2}, \frac{5\pi}{4})\) and got back to \((\sqrt{2}, \frac{5\pi}{4})\)

This confirms our conversion was correct!

Verification successful: \((\sqrt{2}, \frac{5\pi}{4})\)
Final answer:

The Cartesian coordinates are \((-1, -1)\), and converting back gives the original polar coordinates.

Applied rules:

• Verification method: Convert back to original system to check accuracy

• Quadrant adjustment: Third quadrant requires adding \(\pi\) to basic angle

• Trigonometric values: \(\cos\left(\frac{5\pi}{4}\right) = \sin\left(\frac{5\pi}{4}\right) = -\frac{\sqrt{2}}{2}\)

5 Complex Conversion Problem
Exercise 5
Convert the Cartesian coordinates \((-\sqrt{3}, 1)\) to polar coordinates, expressing \(\theta\) in both radians and degrees.
Definition:

Angle measurement: Radians and degrees are both valid ways to measure angles

Given
\((x,y) = (-\sqrt{3}, 1)\)
Calculate r
\(r = 2\)
Calculate θ
\(\theta = \frac{5\pi}{6}\) or \(150°\)
Step 1: Calculate the radial coordinate

\(r = \sqrt{x^2 + y^2} = \sqrt{(-\sqrt{3})^2 + 1^2} = \sqrt{3 + 1} = \sqrt{4} = 2\)

Step 2: Calculate the angle

\(\tan(\theta) = \frac{y}{x} = \frac{1}{-\sqrt{3}} = -\frac{1}{\sqrt{3}} = -\frac{\sqrt{3}}{3}\)

So \(\theta = \arctan\left(-\frac{\sqrt{3}}{3}\right) = -\frac{\pi}{6}\)

Step 3: Adjust for quadrant

The point \((-\sqrt{3}, 1)\) is in the second quadrant (negative x, positive y)

Since \(\arctan\left(-\frac{\sqrt{3}}{3}\right) = -\frac{\pi}{6}\) is in the fourth quadrant, add \(\pi\):

\(\theta = -\frac{\pi}{6} + \pi = \frac{5\pi}{6}\)

Step 4: Convert to degrees

To convert radians to degrees: \(\text{degrees} = \text{radians} \times \frac{180°}{\pi}\)

\(\theta = \frac{5\pi}{6} \times \frac{180°}{\pi} = \frac{5 \times 180°}{6} = \frac{900°}{6} = 150°\)

Step 5: Verify the result

Check: \(x = 2\cos\left(\frac{5\pi}{6}\right) = 2 \cdot \left(-\frac{\sqrt{3}}{2}\right) = -\sqrt{3}\) ✓

\(y = 2\sin\left(\frac{5\pi}{6}\right) = 2 \cdot \frac{1}{2} = 1\) ✓

\((2, \frac{5\pi}{6})\) or \((2, 150°)\)
Final answer:

The polar coordinates are \((2, \frac{5\pi}{6})\) or equivalently \((2, 150°)\).

Applied rules:

• Radian-degree conversion: \(\text{degrees} = \text{radians} \times \frac{180°}{\pi}\)

• Quadrant adjustment: Second quadrant requires adding \(\pi\) to basic angle

• Trigonometric values: \(\cos\left(\frac{5\pi}{6}\right) = -\frac{\sqrt{3}}{2}\), \(\sin\left(\frac{5\pi}{6}\right) = \frac{1}{2}\)

Questions & Answers

Question: When converting from Cartesian to polar coordinates, why do we need to adjust the angle based on the quadrant? Isn't \(\arctan(y/x)\) sufficient?

Answer: Great question! The \(\arctan(y/x)\) function alone is not sufficient because it only returns values in the range \((-\pi/2, \pi/2)\), which corresponds to angles in the first and fourth quadrants.

For example, if you have the point \((-1, -1)\), then \(\arctan(-1/-1) = \arctan(1) = \pi/4\). But the point \((-1, -1)\) is clearly in the third quadrant, not the first!

This is why we must consider the signs of both \(x\) and \(y\) to determine the actual quadrant of the point and adjust the angle accordingly:

  • First quadrant: \(\theta = \arctan(y/x)\)
  • Second quadrant: \(\theta = \arctan(y/x) + \pi\)
  • Third quadrant: \(\theta = \arctan(y/x) + \pi\)
  • Fourth quadrant: \(\theta = \arctan(y/x)\) (or \(\arctan(y/x) + 2\pi\) for positive angle)

Without this adjustment, you'd get the wrong direction for the point!

Question: What happens when \(x = 0\) in the formula \(\theta = \arctan(y/x)\)? How do I handle points on the y-axis?

Answer: When \(x = 0\), the formula \(\theta = \arctan(y/x)\) is undefined because division by zero is not allowed.

For points on the y-axis, you must determine the angle directly based on the location of the point:

  • If \(x = 0\) and \(y > 0\): The point is on the positive y-axis, so \(\theta = \pi/2\)
  • If \(x = 0\) and \(y < 0\): The point is on the negative y-axis, so \(\theta = 3\pi/2\) (or \(-\pi/2\))
  • If \(x = 0\) and \(y = 0\): The point is at the origin, and \(\theta\) is undefined (but typically set to 0)

Similarly, for points on the x-axis:

  • If \(y = 0\) and \(x > 0\): \(\theta = 0\)
  • If \(y = 0\) and \(x < 0\): \(\theta = \pi\)

These are special cases that must be handled separately from the general \(\arctan(y/x)\) formula.

Question: How can I verify that my coordinate conversion is correct?

Answer: There are several effective methods to verify your coordinate conversions:

  • Back-substitution: Use your polar coordinates to convert back to Cartesian and see if you get your original point
  • Distance check: Verify that \(r = \sqrt{x^2 + y^2}\) holds true
  • Direction check: Use \(\tan(\theta) = y/x\) (when \(x \neq 0\)) to verify the angle
  • Visual check: Plot both representations and confirm they represent the same point

For example, if you converted \((3, 4)\) to polar coordinates \((5, \arctan(4/3))\):

  • Distance check: \(r = \sqrt{3^2 + 4^2} = \sqrt{9 + 16} = \sqrt{25} = 5\) ✓
  • Direction check: \(\tan(\theta) = 4/3\), so \(\theta = \arctan(4/3)\) ✓
  • Back-substitution: \(x = 5\cos(\arctan(4/3)) = 3\), \(y = 5\sin(\arctan(4/3)) = 4\) ✓

Verification is crucial for ensuring accuracy in coordinate conversions!