Rational Functions (Asymptotes, Holes, Graphs)

Master rational functions: finding vertical, horizontal, and slant asymptotes, identifying holes, and sketching accurate graphs.

Rational Functions Summary: Definitions, Rules & Methods
f(x) = \frac{P(x)}{Q(x)}
Rational Function Definition
\text{Domain: } \{x \in \mathbb{R} \mid Q(x) \neq 0\}
Domain Restriction
\text{Vertical Asymptote: } x = c \text{ if } Q(c) = 0, P(c) \neq 0
Vertical Asymptote Condition
Vertical Asymptote
x = c
When denominator = 0, numerator ≠ 0
Horizontal Asymptote
y = L
Depends on degree comparison
Slant Asymptote
y = mx + b
When degree of num = deg of den + 1
Hole
(c, L)
When factor cancels out
Key Definitions:

Rational Function: A function of the form f(x) = P(x)/Q(x) where P(x) and Q(x) are polynomials

Vertical Asymptote: A vertical line that the graph approaches but never touches

Horizontal Asymptote: A horizontal line that the graph approaches as x goes to ±∞

Slant/Oblique Asymptote: A non-horizontal, non-vertical line that the graph approaches as x goes to ±∞

Hole: A point where the function is undefined but can be made continuous by filling it in

Domain: All real numbers except those that make the denominator zero

Discontinuity: A point where the function is not continuous

Removable Discontinuity: A hole in the graph (can be "filled in")

Non-removable Discontinuity: An asymptote (cannot be filled in)

Rational Function Analysis Method:
  1. Factor numerator and denominator completely
  2. Find domain restrictions by setting denominator equal to zero
  3. Identify holes by finding common factors that cancel
  4. Find vertical asymptotes where denominator is zero but numerator is not
  5. Determine horizontal/slant asymptotes by comparing degrees
  6. Find intercepts (x and y)
  7. Sketch the graph using all gathered information
Asymptote Rules: HA: deg(num) vs deg(den), SA: deg(num) = deg(den)+1
Domain: Exclude values that make denominator zero
Tip 1: Always factor first before identifying asymptotes.
Tip 2: Cancel common factors to find holes, not asymptotes.
Tip 3: Graph approaches but never crosses horizontal/slant asymptotes at far ends.
Tip 4: Vertical asymptotes act as barriers that the graph cannot cross.
Essential Rules:

• Vertical asymptotes: x = c where Q(c) = 0 and P(c) ≠ 0

• Horizontal asymptotes: Compare degrees of numerator and denominator

• Slant asymptotes: Occur when degree of numerator is exactly 1 more than denominator

• Holes: Occur when factors cancel in numerator and denominator

• End behavior: Determined by horizontal/slant asymptotes

Finding Asymptotes & Holes
1 Vertical Asymptotes
Example 1
Find the vertical asymptotes of f(x) = (x² - 4)/(x² - 5x + 6).
Vertical Asymptote Definition:

Vertical asymptotes occur at x-values that make the denominator zero but the numerator non-zero

Vertical Asymptote Method:
  1. Factor both numerator and denominator
  2. Cancel any common factors (these create holes)
  3. Set remaining denominator factors equal to zero
  4. Solve for x to find vertical asymptotes
Original
f(x) = (x² - 4)/(x² - 5x + 6)
Factored
f(x) = (x-2)(x+2)/((x-2)(x-3))
Simplified
f(x) = (x+2)/(x-3), x ≠ 2
Step 1: Factor the numerator

x² - 4 = (x - 2)(x + 2) [difference of squares]

Step 2: Factor the denominator

x² - 5x + 6 = (x - 2)(x - 3) [find factors of 6 that add to -5]

Step 3: Write in factored form

f(x) = (x - 2)(x + 2) / (x - 2)(x - 3)

Step 4: Cancel common factors

f(x) = (x + 2) / (x - 3), where x ≠ 2

The factor (x - 2) cancels, indicating a hole at x = 2

Step 5: Find vertical asymptotes

Vertical asymptotes occur where the denominator is zero but the numerator is not

Denominator after cancellation: (x - 3)

Set x - 3 = 0 → x = 3

Step 6: Identify hole

Since (x - 2) canceled, there's a hole at x = 2

To find the y-coordinate of the hole: substitute x = 2 into the simplified function

y = (2 + 2)/(2 - 3) = 4/(-1) = -4

Hole: (2, -4)

Vertical asymptote: x = 3
Hole: (2, -4)
Final answer:

The function has a vertical asymptote at x = 3 and a hole at (2, -4).

Applied rules:

• Factorization: Factor both numerator and denominator completely

• Common factors: Cancel to identify holes

• VA condition: Denominator = 0, numerator ≠ 0

2 Horizontal Asymptotes
Example 2
Find the horizontal asymptotes of f(x) = (3x² + 2x - 1)/(2x² - 5x + 3).
Horizontal Asymptote Rules:

Compare degrees of numerator (n) and denominator (d): n < d → y=0, n = d → y=ratio of leading coeffs, n > d → no HA

Horizontal Asymptote Method:
  1. Identify the degrees of numerator and denominator
  2. Compare the degrees
  3. Apply the appropriate rule
  4. For equal degrees, divide leading coefficients
Function
f(x) = (3x² + 2x - 1)/(2x² - 5x + 3)
Degrees
numerator: 2, denominator: 2
HA
y = 3/2
Step 1: Identify degrees

Numerator: 3x² + 2x - 1 → degree = 2

Denominator: 2x² - 5x + 3 → degree = 2

Step 2: Compare degrees

Degree of numerator = Degree of denominator = 2

Step 3: Apply horizontal asymptote rule

When degrees are equal, HA is the ratio of leading coefficients

Leading coefficient of numerator = 3

Leading coefficient of denominator = 2

HA: y = 3/2

Step 4: Verify using limits

lim(x→∞) (3x² + 2x - 1)/(2x² - 5x + 3)

Divide numerator and denominator by x²:

lim(x→∞) (3 + 2/x - 1/x²)/(2 - 5/x + 3/x²) = 3/2

Step 5: Interpret the result

As x approaches positive or negative infinity, f(x) approaches 3/2

The graph gets closer and closer to the line y = 3/2 but never touches it

Horizontal asymptote: y = 3/2
Final answer:

The horizontal asymptote is y = 3/2.

Applied rules:

• Degree comparison: n = d → HA at leading coefficient ratio

• Leading coefficients: Divide to find HA value

• Limit behavior: Confirms HA as x approaches infinity

Graphing and Applications
3 Slant Asymptotes
Example 3
Find the slant asymptote of f(x) = (x³ + 2x² - x + 1)/(x² - 1).
Slant Asymptote Condition:

Occurs when the degree of the numerator is exactly one more than the degree of the denominator

Slant Asymptote Method:
  1. Confirm that degree of numerator is exactly 1 more than denominator
  2. Use polynomial long division to divide numerator by denominator
  3. The quotient (ignoring remainder) is the slant asymptote
  4. Verify by taking the limit of f(x) - (quotient)
Function
f(x) = (x³ + 2x² - x + 1)/(x² - 1)
Division
x³ + 2x² - x + 1 = (x² - 1)(x + 2) + (x - 1)
SA
y = x + 2
Step 1: Check degree condition

Degree of numerator = 3

Degree of denominator = 2

Since 3 = 2 + 1, a slant asymptote exists

Step 2: Perform polynomial long division

Divide (x³ + 2x² - x + 1) ÷ (x² - 1)

x³ ÷ x² = x

x(x² - 1) = x³ - x

(x³ + 2x² - x + 1) - (x³ - x) = 2x² + 1

2x² ÷ x² = 2

2(x² - 1) = 2x² - 2

(2x² + 1) - (2x² - 2) = 3

Step 3: Write the result

(x³ + 2x² - x + 1)/(x² - 1) = x + 2 + 3/(x² - 1)

Step 4: Identify slant asymptote

As x → ±∞, the term 3/(x² - 1) → 0

Therefore, the slant asymptote is y = x + 2

Step 5: Verify with limits

lim(x→∞) [f(x) - (x + 2)] = lim(x→∞) 3/(x² - 1) = 0 ✓

Step 6: Identify vertical asymptotes

Set denominator equal to zero: x² - 1 = 0

(x - 1)(x + 1) = 0

Vertical asymptotes: x = 1 and x = -1

Slant asymptote: y = x + 2
Vertical asymptotes: x = 1, x = -1
Final answer:

The slant asymptote is y = x + 2, and the vertical asymptotes are x = 1 and x = -1.

Applied rules:

• SA condition: Numerator degree = Denominator degree + 1

• Polynomial division: Quotient gives SA equation

• Limit verification: Confirm SA approaches function at infinity

4 Complete Graph Analysis
Example 4
Analyze f(x) = (x² - 4)/(x² - 2x) completely and sketch its graph.
Complete Analysis:

Find all key features: domain, intercepts, asymptotes, holes, and behavior

Complete Analysis Method:
  1. Factor numerator and denominator
  2. Identify domain restrictions
  3. Find x and y intercepts
  4. Identify holes
  5. Find vertical asymptotes
  6. Find horizontal/slant asymptotes
  7. Analyze behavior around asymptotes
  8. Sketch the graph
Function
f(x) = (x² - 4)/(x² - 2x)
Factored
f(x) = (x-2)(x+2)/(x(x-2))
Simplified
f(x) = (x+2)/x, x ≠ 2
Step 1: Factor numerator and denominator

Numerator: x² - 4 = (x - 2)(x + 2) [difference of squares]

Denominator: x² - 2x = x(x - 2) [factor out x]

f(x) = (x - 2)(x + 2) / x(x - 2)

Step 2: Simplify and identify holes

Cancel the common factor (x - 2): f(x) = (x + 2)/x, where x ≠ 2

There's a hole at x = 2 (since factor canceled)

At x = 2: y = (2 + 2)/2 = 4/2 = 2

Hole: (2, 2)

Step 3: Find vertical asymptotes

After canceling, denominator is x

Set x = 0 → vertical asymptote at x = 0

Step 4: Find horizontal asymptote

After simplification: f(x) = (x + 2)/x = 1 + 2/x

As x → ±∞, 2/x → 0

Horizontal asymptote: y = 1

Step 5: Find intercepts

y-intercept: Not defined since x = 0 is not in domain

x-intercept: Set numerator equal to zero: x + 2 = 0 → x = -2

x-intercept: (-2, 0)

Step 6: Analyze behavior

As x → 0⁻: f(x) → -∞

As x → 0⁺: f(x) → +∞

As x → ±∞: f(x) → 1

Step 7: Sketch the graph

Vertical asymptote at x = 0

Horizontal asymptote at y = 1

Hole at (2, 2)

X-intercept at (-2, 0)

VA: x = 0
HA: y = 1
Hole: (2, 2)
X-int: (-2, 0)
Solution completed:

The function has a vertical asymptote at x = 0, a horizontal asymptote at y = 1, a hole at (2, 2), and an x-intercept at (-2, 0).

Applied rules:

• Factorization: Factor completely to identify holes and VA

• HA for equal degrees: y = (leading coeff of num)/(leading coeff of den)

• Domain restrictions: Exclude values that make denominator zero

5 Real-World Application
Example 5
The concentration of a drug in the bloodstream t hours after injection is given by C(t) = 5t/(t² + 1). Find the maximum concentration and describe the long-term behavior.
Real-World Application:

Asymptotes help understand long-term behavior of rational functions in applications

Application Analysis Method:
  1. Identify the rational function model
  2. Find horizontal asymptote for long-term behavior
  3. Use calculus or algebra to find maximum
  4. Interpret results in context
Function
C(t) = 5t/(t² + 1)
HA
y = 0
Max
t = 1, C(1) = 2.5
Step 1: Analyze the function

C(t) = 5t/(t² + 1), where t ≥ 0 (time is non-negative)

Numerator: 5t (degree 1)

Denominator: t² + 1 (degree 2)

Step 2: Find horizontal asymptote

Since degree of numerator (1) < degree of denominator (2)

Horizontal asymptote: y = 0

This means lim(t→∞) C(t) = 0

Step 3: Find maximum concentration

Using calculus: C'(t) = [5(t² + 1) - 5t(2t)]/(t² + 1)² = (5 - 5t²)/(t² + 1)²

Set C'(t) = 0: 5 - 5t² = 0 → t² = 1 → t = 1 (since t ≥ 0)

C(1) = 5(1)/(1² + 1) = 5/2 = 2.5

Step 4: Analyze behavior

At t = 0: C(0) = 0 (no drug initially)

At t = 1: C(1) = 2.5 (maximum concentration)

As t → ∞: C(t) → 0 (drug eliminated from system)

Step 5: Interpret in context

The maximum concentration of 2.5 units occurs 1 hour after injection

Over time, the drug concentration approaches 0 as the body eliminates the drug

The horizontal asymptote y = 0 represents the long-term elimination of the drug

Step 6: Verify domain and range

Domain: [0, ∞) since t represents time

Range: [0, 2.5] since concentration starts at 0, peaks at 2.5, and approaches 0

Max concentration: 2.5 units at t = 1 hour
Long-term: C(t) → 0 as t → ∞
Solution completed:

The maximum drug concentration of 2.5 units occurs 1 hour after injection, and the concentration approaches 0 over time.

Applied rules:

• HA for degree comparison: n < d → HA at y = 0

• Optimization: Use calculus to find maximum value

• Real-world constraints: Consider domain limitations (t ≥ 0)

Questions & Answers

Question: How do I know if I have a hole or a vertical asymptote when the denominator equals zero?

Answer: The key is to factor and simplify the rational function:

Vertical Asymptote: Occurs when a factor remains in the denominator after full simplification

Hole: Occurs when a factor cancels completely from both numerator and denominator

Steps:

  1. Factor both numerator and denominator completely
  2. Cancel any common factors
  3. For remaining factors in denominator: set equal to zero → VA
  4. For canceled factors: set equal to zero → x-coordinate of hole

Example: f(x) = (x² - 4)/(x² - 2x) = (x-2)(x+2)/x(x-2)

The (x-2) factor cancels → hole at x = 2

The x remains in denominator → vertical asymptote at x = 0

Question: When do I get a slant asymptote versus a horizontal asymptote?

Answer: It depends on the degrees of the numerator (n) and denominator (d):

Horizontal Asymptote:

  • n < d: HA at y = 0
  • n = d: HA at y = (leading coeff of num)/(leading coeff of den)

Slant Asymptote:

  • n = d + 1: Use polynomial long division, quotient is the SA

No Asymptote:

  • n > d + 1: No horizontal or slant asymptote (behavior dominated by polynomial part)

Example: f(x) = (x² + 1)/x has SA because 2 = 1 + 1

f(x) = (x + 1)/(x² + 1) has HA at y = 0 because 1 < 2

Question: Can a graph cross its horizontal or slant asymptote?

Answer: Yes, a graph can cross its horizontal or slant asymptote!

Vertical asymptotes: Never crossed (graph approaches from one side)

Horizontal/Slant asymptotes: Can be crossed finitely many times, but approached as x → ±∞

Key distinction:

  • Asymptotes describe end behavior as x → ±∞
  • Graph can cross asymptotes in the middle of the graph
  • As x gets very large, graph gets closer to asymptote

Example: f(x) = (x² + 1)/(x² + 2) has HA y = 1, and since (x² + 1) < (x² + 2), f(x) < 1 for all x, so it never crosses the HA.

But f(x) = (x³ + x)/(x² + 1) has SA y = x and crosses it at x = 0.