Inverse function: A function \(f^{-1}(x)\) such that \(f(f^{-1}(x)) = x\) and \(f^{-1}(f(x)) = x\) for all \(x\) in the appropriate domains
One-to-one function: A function where each output corresponds to exactly one input
- Replace \(f(x)\) with \(y\)
- Swap \(x\) and \(y\)
- Solve for \(y\)
- Replace \(y\) with \(f^{-1}(x)\)
- Verify by checking that \(f(f^{-1}(x)) = x\) and \(f^{-1}(f(x)) = x\)
\(y = 3x + 7\)
\(x = 3y + 7\)
\(x - 7 = 3y\)
\(y = \frac{x - 7}{3}\)
\(f^{-1}(x) = \frac{x - 7}{3}\)
Check: \(f(f^{-1}(x)) = f\left(\frac{x - 7}{3}\right) = 3\left(\frac{x - 7}{3}\right) + 7 = x - 7 + 7 = x\) ✓
Check: \(f^{-1}(f(x)) = f^{-1}(3x + 7) = \frac{(3x + 7) - 7}{3} = \frac{3x}{3} = x\) ✓
The inverse of \(f(x) = 3x + 7\) is \(f^{-1}(x) = \frac{x - 7}{3}\)
• Inverse verification: Must satisfy \(f(f^{-1}(x)) = x\) and \(f^{-1}(f(x)) = x\)
• Linear functions: Always have inverses since they are one-to-one
• Algebraic manipulation: Solve for the dependent variable after swapping variables
Inverse verification: Two functions are inverses if \(f(g(x)) = x\) and \(g(f(x)) = x\)
\(f(g(x)) = f\left(\frac{x + 3}{x - 2}\right) = \frac{2\left(\frac{x + 3}{x - 2}\right) + 3}{\left(\frac{x + 3}{x - 2}\right) - 1}\)
Numerator: \(2\left(\frac{x + 3}{x - 2}\right) + 3 = \frac{2(x + 3)}{x - 2} + 3 = \frac{2x + 6 + 3(x - 2)}{x - 2} = \frac{2x + 6 + 3x - 6}{x - 2} = \frac{5x}{x - 2}\)
Denominator: \(\frac{x + 3}{x - 2} - 1 = \frac{x + 3 - (x - 2)}{x - 2} = \frac{x + 3 - x + 2}{x - 2} = \frac{5}{x - 2}\)
\(f(g(x)) = \frac{\frac{5x}{x - 2}}{\frac{5}{x - 2}} = \frac{5x}{x - 2} \cdot \frac{x - 2}{5} = \frac{5x}{5} = x\)
\(g(f(x)) = g\left(\frac{2x + 3}{x - 1}\right) = \frac{\frac{2x + 3}{x - 1} + 3}{\frac{2x + 3}{x - 1} - 2}\)
Numerator: \(\frac{2x + 3}{x - 1} + 3 = \frac{2x + 3 + 3(x - 1)}{x - 1} = \frac{2x + 3 + 3x - 3}{x - 1} = \frac{5x}{x - 1}\)
Denominator: \(\frac{2x + 3}{x - 1} - 2 = \frac{2x + 3 - 2(x - 1)}{x - 1} = \frac{2x + 3 - 2x + 2}{x - 1} = \frac{5}{x - 1}\)
\(g(f(x)) = \frac{\frac{5x}{x - 1}}{\frac{5}{x - 1}} = \frac{5x}{x - 1} \cdot \frac{x - 1}{5} = \frac{5x}{5} = x\)
Yes, \(f(x) = \frac{2x + 3}{x - 1}\) and \(g(x) = \frac{x + 3}{x - 2}\) are inverses of each other.
• Function composition: Substitute one function into another
• Complex fraction simplification: Multiply by the reciprocal of the denominator
• Inverse verification: Both compositions must equal the identity function
Horizontal line test: A function is one-to-one if no horizontal line intersects its graph more than once
One-to-one function: Every output corresponds to exactly one input
\(h(x) = x^2 - 4x + 3\) is a quadratic function (parabola opening upward)
\(h(x) = x^2 - 4x + 3 = (x^2 - 4x + 4) - 4 + 3 = (x - 2)^2 - 1\)
Vertex is at \((2, -1)\)
Since the parabola opens upward and has a vertex, any horizontal line above the vertex will intersect the graph twice
For example: \(h(0) = 3\) and \(h(4) = 3\), so the function is not one-to-one
To make the function one-to-one, we can restrict the domain to either \([2, \infty)\) or \((-\infty, 2]\)
Let's choose \([2, \infty)\) (the right half of the parabola)
With domain \([2, \infty)\), \(h(x) = (x - 2)^2 - 1\)
Let \(y = (x - 2)^2 - 1\)
\(y + 1 = (x - 2)^2\)
\(\sqrt{y + 1} = x - 2\) (taking positive root since \(x \geq 2\))
\(x = \sqrt{y + 1} + 2\)
So \(h^{-1}(x) = \sqrt{x + 1} + 2\)
For \(x \geq -1\): \(h(h^{-1}(x)) = h(\sqrt{x + 1} + 2) = (\sqrt{x + 1} + 2 - 2)^2 - 1 = (\sqrt{x + 1})^2 - 1 = x + 1 - 1 = x\) ✓
Restricted domain: \([2, \infty)\)
Inverse: \(h^{-1}(x) = \sqrt{x + 1} + 2\)
\(h(x) = x^2 - 4x + 3\) is not one-to-one on its natural domain. With domain restricted to \([2, \infty)\), the inverse is \(h^{-1}(x) = \sqrt{x + 1} + 2\).
• Horizontal line test: Determines if function is one-to-one
• Domain restriction: Can make non-one-to-one functions invertible
• Quadratic functions: Can be made one-to-one by restricting to one side of the vertex
Inverse function: A function that "undoes" the effect of the original function. If \(f(a) = b\), then \(f^{-1}(b) = a\).
One-to-one function: A function where each element in the range corresponds to exactly one element in the domain. No two different inputs give the same output.
Horizontal line test: A graphical method to determine if a function is one-to-one. If any horizontal line intersects the graph at most once, the function is one-to-one.
Domain and range relationship: The domain of a function is the range of its inverse, and the range of a function is the domain of its inverse.
Function composition: The operation of applying one function to the result of another, written as \((f \circ g)(x) = f(g(x))\).
Finding Inverse Functions:
- Replace \(f(x)\) with \(y\): Write the function as \(y = f(x)\)
- Swap variables: Exchange \(x\) and \(y\) to get \(x = f(y)\)
- Solve for \(y\): Isolate \(y\) in terms of \(x\)
- Replace \(y\) with \(f^{-1}(x)\): Write the result as \(f^{-1}(x) = \text{expression}\)
- Verify: Check that \(f(f^{-1}(x)) = x\) and \(f^{-1}(f(x)) = x\)
Determining if a Function is One-to-One:
- Algebraic method: Show that if \(f(a) = f(b)\), then \(a = b\)
- Graphical method: Apply the horizontal line test
- Derivative method: If \(f'(x) > 0\) or \(f'(x) < 0\) throughout the domain, the function is one-to-one
Properties of Inverse Functions:
• Composition property: \(f(f^{-1}(x)) = x\) and \(f^{-1}(f(x)) = x\)
• Domain-range swap: Domain of \(f\) equals range of \(f^{-1}\), and range of \(f\) equals domain of \(f^{-1}\)
• Graph symmetry: The graph of \(f^{-1}\) is the reflection of the graph of \(f\) across the line \(y = x\)
Conditions for Existence:
• One-to-one requirement: A function has an inverse if and only if it is one-to-one
• Horizontal line test: Passes if and only if the function is one-to-one
• Algebraic test: If \(f(a) = f(b)\) implies \(a = b\), then \(f\) is one-to-one
Cubic function: A polynomial function of degree 3
\(y = x^3 + 2\)
\(x = y^3 + 2\)
\(x - 2 = y^3\)
\(y = \sqrt[3]{x - 2}\)
\(p^{-1}(x) = \sqrt[3]{x - 2}\)
Check: \(p(p^{-1}(x)) = p(\sqrt[3]{x - 2}) = (\sqrt[3]{x - 2})^3 + 2 = (x - 2) + 2 = x\) ✓
Check: \(p^{-1}(p(x)) = p^{-1}(x^3 + 2) = \sqrt[3]{(x^3 + 2) - 2} = \sqrt[3]{x^3} = x\) ✓
Since \(p'(x) = 3x^2 \geq 0\) for all \(x\) and \(p'(x) = 0\) only at \(x = 0\), the function is strictly increasing and therefore one-to-one.
The inverse of \(p(x) = x^3 + 2\) is \(p^{-1}(x) = \sqrt[3]{x - 2}\)
• Cubic root: The inverse of cubing is taking the cube root
• Odd-degree polynomials: Polynomials of odd degree are always one-to-one
• Derivative test: Positive derivative indicates strictly increasing function
Applied inverse: Inverses of functions that model real-world relationships
\(F = \frac{9}{5}C + 32\)
\(C = \frac{9}{5}F + 32\)
\(C - 32 = \frac{9}{5}F\)
\(F = \frac{5}{9}(C - 32)\)
\(F = \frac{5}{9}C - \frac{160}{9}\)
\(F^{-1}(C) = \frac{5}{9}C - \frac{160}{9}\)
Or equivalently: \(F^{-1}(C) = \frac{5}{9}(C - 32)\)
The inverse function \(F^{-1}(C) = \frac{5}{9}(C - 32)\) converts Celsius temperature back to Fahrenheit temperature.
Check: \(F(F^{-1}(C)) = F\left(\frac{5}{9}(C - 32)\right) = \frac{9}{5} \cdot \frac{5}{9}(C - 32) + 32 = C - 32 + 32 = C\) ✓
Check: \(F^{-1}(F(C)) = F^{-1}\left(\frac{9}{5}C + 32\right) = \frac{5}{9}\left(\frac{9}{5}C + 32 - 32\right) = \frac{5}{9} \cdot \frac{9}{5}C = C\) ✓
Converts Celsius to Fahrenheit
The inverse function is \(F^{-1}(C) = \frac{5}{9}(C - 32)\), which converts Celsius temperature to Fahrenheit temperature.
• Applied mathematics: Inverses have practical interpretations
• Temperature conversion: Common real-world application of inverse functions
• Linear functions: Always have inverses since they are one-to-one
Inverse function: A function that reverses the effect of another function. If the original function maps \(a\) to \(b\), the inverse maps \(b\) to \(a\). Formally, if \(y = f(x)\), then \(x = f^{-1}(y)\).
One-to-one function: A function where each output value corresponds to exactly one input value. No two distinct inputs produce the same output. This is a necessary and sufficient condition for a function to have an inverse.
Horizontal line test: A graphical test to determine if a function is one-to-one. If any horizontal line intersects the graph of the function at most once, then the function is one-to-one and has an inverse.
Function composition: The operation of applying one function to the result of another, denoted as \((f \circ g)(x) = f(g(x))\). For inverse functions, \(f \circ f^{-1} = f^{-1} \circ f\) is the identity function.
Domain and range relationship: The domain of a function becomes the range of its inverse, and the range of a function becomes the domain of its inverse.
Method for Finding Inverse Functions:
- Start with the function: Write the function as \(y = f(x)\)
- Swap variables: Exchange \(x\) and \(y\) to get \(x = f(y)\)
- Solve for \(y\): Isolate \(y\) to express it in terms of \(x\)
- Replace notation: Write the result as \(y = f^{-1}(x)\)
- Verify: Check that both \(f(f^{-1}(x)) = x\) and \(f^{-1}(f(x)) = x\)
- State domain: Specify the domain of the inverse function
Method for Verifying Inverse Functions:
- Compute composition: Find \(f(g(x))\) and \(g(f(x))\)
- Simplify: Reduce both compositions to their simplest forms
- Check identity: Verify that both compositions equal \(x\)
- Consider domains: Ensure all operations are valid for the given domains
Properties of Inverse Functions:
• Composition property: \(f(f^{-1}(x)) = x\) and \(f^{-1}(f(x)) = x\) for all \(x\) in appropriate domains
• Domain-range swap: Domain of \(f\) equals range of \(f^{-1}\), and range of \(f\) equals domain of \(f^{-1}\)
• Graph symmetry: The graph of \(f^{-1}\) is the reflection of the graph of \(f\) across the line \(y = x\)
• Uniqueness: If a function has an inverse, it is unique
Conditions for Invertibility:
• One-to-one requirement: A function has an inverse if and only if it is one-to-one
• Horizontal line test: Passes if and only if the function is one-to-one
• Algebraic test: If \(f(a) = f(b)\) implies \(a = b\), then \(f\) is one-to-one
Function-Specific Properties:
• Linear functions: \(f(x) = ax + b\) (where \(a \neq 0\)) has inverse \(f^{-1}(x) = \frac{x - b}{a}\)
• Odd-degree polynomials: Generally one-to-one and have inverses
• Even-degree polynomials: Not one-to-one on their natural domain, require domain restriction
• Exponential functions: Inverses are logarithmic functions