Point-slope form: The linear equation written as y - y₁ = m(x - x₁), where m is the slope and (x₁, y₁) is a point on the line
- Identify the slope (m) and the point (x₁, y₁)
- Substitute m, x₁, and y₁ into the point-slope form: y - y₁ = m(x - x₁)
- Simplify if necessary
- Verify by checking that the given point satisfies the equation
Slope (m) = 3
Point (x₁, y₁) = (2, 5)
The general point-slope form is: y - y₁ = m(x - x₁)
Substitute m = 3, x₁ = 2, and y₁ = 5:
y - 5 = 3(x - 2)
Distribute the slope: y - 5 = 3x - 6
Add 5 to both sides: y = 3x - 6 + 5
y = 3x - 1
Check point (2, 5): y = 3(2) - 1 = 6 - 1 = 5 ✓
Check that slope is 3: coefficient of x is 3 ✓
\(y - 5 = 3(x - 2)\) or \(y = 3x - 1\)
The equation of the line in point-slope form is y - 5 = 3(x - 2), which simplifies to y = 3x - 1.
• Point-slope form: y - y₁ = m(x - x₁) where (x₁, y₁) is a point and m is slope
• Substitution: Replace variables with known values
• Verification: Check that given point satisfies the equation
Negative slope line: A line with a negative slope (m < 0) that decreases from left to right
Slope (m) = -2
Point (x₁, y₁) = (-1, 4)
y - y₁ = m(x - x₁)
y - 4 = -2(x - (-1))
y - 4 = -2(x + 1)
y - 4 = -2x - 2
y = -2x - 2 + 4
y = -2x + 2
Check point (-1, 4): y = -2(-1) + 2 = 2 + 2 = 4 ✓
Check slope: coefficient of x is -2 ✓
\(y - 4 = -2(x + 1)\) or \(y = -2x + 2\)
The equation of the line in point-slope form is y - 4 = -2(x + 1), which simplifies to y = -2x + 2.
• Point-slope form: y - y₁ = m(x - x₁) works for any slope value
• Negative slope: Indicates line decreases from left to right
• Sign handling: Be careful with negative signs when substituting
Horizontal line: A line with zero slope (m = 0), parallel to the x-axis, of the form y = constant
Slope (m) = 0 (horizontal line)
Point (x₁, y₁) = (3, -2)
y - y₁ = m(x - x₁)
y - (-2) = 0(x - 3)
y + 2 = 0(x - 3)
y + 2 = 0
y = -2
This is a horizontal line where y is always -2, regardless of x
Check point (3, -2): y = -2 ✓
Check point (0, -2): y = -2 ✓
Check point (5, -2): y = -2 ✓
\(y = -2\)
The equation of the horizontal line is y = -2, derived from the point-slope form y - (-2) = 0(x - 3).
• Horizontal line: Slope is 0, equation is y = constant
• Point-slope with zero slope: y - y₁ = 0(x - x₁) simplifies to y = y₁
• Constant function: y-value remains the same for all x-values
Point-slope form: The linear equation written as y - y₁ = m(x - x₁), where m is the slope and (x₁, y₁) is a point on the line
Slope (m): The ratio of vertical change (rise) to horizontal change (run) between any two points on the line
Reference point: Any known point (x₁, y₁) that lies on the line
Positive slope: Line rises from left to right (m > 0)
Negative slope: Line falls from left to right (m < 0)
Zero slope: Horizontal line (m = 0)
- Identify m and (x₁, y₁): From given information
- Substitute into formula: y - y₁ = m(x - x₁)
- Simplify if needed: Distribute and solve for y
- Convert if necessary: To slope-intercept or standard form
- Verify: Check that given point satisfies the equation
• Form identification: y - y₁ = m(x - x₁) is point-slope form
• Required information: Need slope and one point on the line
• Flexibility: Any point on the line can be used as (x₁, y₁)
• Conversion: Can be converted to other linear forms
Two-point form: When given two points, first find the slope using m = (y₂ - y₁)/(x₂ - x₁), then use point-slope form
Point 1: (x₁, y₁) = (1, 3)
Point 2: (x₂, y₂) = (4, 9)
Using the slope formula: m = (y₂ - y₁)/(x₂ - x₁)
m = (9 - 3)/(4 - 1) = 6/3 = 2
We can use either point. Using (1, 3):
y - y₁ = m(x - x₁)
y - 3 = 2(x - 1)
Check point (1, 3): y - 3 = 2(1 - 1) → 3 - 3 = 2(0) → 0 = 0 ✓
Check point (4, 9): y - 3 = 2(4 - 1) → 9 - 3 = 2(3) → 6 = 6 ✓
Using (4, 9): y - 9 = 2(x - 4)
Both equations represent the same line!
y - 3 = 2(x - 1)
y - 3 = 2x - 2
y = 2x - 2 + 3
y = 2x + 1
\(y - 3 = 2(x - 1)\) or \(y - 9 = 2(x - 4)\)
The equation of the line in point-slope form is y - 3 = 2(x - 1) or equivalently y - 9 = 2(x - 4), which simplifies to y = 2x + 1.
• Slope formula: m = (y₂ - y₁)/(x₂ - x₁) for two points
• Point-slope flexibility: Can use either point to write the equation
• Verification: Check that both original points satisfy the equation
Linear model: A practical application where point-slope form helps model relationships between variables
Let t = year (independent variable)
Let P = profit in dollars (dependent variable)
Year 2: (t₁, P₁) = (2, 30000)
Year 5: (t₂, P₂) = (5, 45000)
m = (P₂ - P₁)/(t₂ - t₁)
m = (45000 - 30000)/(5 - 2) = 15000/3 = 5000
This means profit increases by $5,000 per year
Using point (2, 30000) and slope m = 5000:
P - P₁ = m(t - t₁)
P - 30000 = 5000(t - 2)
The slope (5000) represents the annual increase in profit
The point (2, 30000) represents the known data point
P - 30000 = 5000(t - 2)
P - 30000 = 5000t - 10000
P = 5000t - 10000 + 30000
P = 5000t + 20000
At t = 2: P = 5000(2) + 20000 = 10000 + 20000 = 30000 ✓
At t = 5: P = 5000(5) + 20000 = 25000 + 20000 = 45000 ✓
\(P - 30000 = 5000(t - 2)\) or \(P = 5000t + 20000\)
The profit equation in point-slope form is P - 30000 = 5000(t - 2), indicating a $5,000 annual increase starting from $20,000 baseline.
• Real-world modeling: Define variables and identify meaningful data points
• Slope interpretation: Represents rate of change in context
• Verification: Check that model fits original data points
Point-slope form: The linear equation written as y - y₁ = m(x - x₁), where m is the slope and (x₁, y₁) is a point on the line
Slope (m): The ratio of vertical change (rise) to horizontal change (run) between any two points on the line, indicating steepness and direction
Reference point (x₁, y₁): Any known point that lies on the line
Positive slope: Line rises from left to right (m > 0), indicating increasing relationship
Negative slope: Line falls from left to right (m < 0), indicating decreasing relationship
Zero slope: Horizontal line (m = 0), indicating no change in y
- Identify required information: Need slope and one point on the line
- Substitute into formula: Replace m, x₁, and y₁ in y - y₁ = m(x - x₁)
- Simplify if needed: Distribute slope and solve for y if converting forms
- Convert if necessary: Change to slope-intercept or standard form
- Interpret meaning: Understand real-world significance of parameters
- Verify: Check that given point(s) satisfy the equation
• Form identification: y - y₁ = m(x - x₁) is point-slope form
• Required information: Need slope and one point on the line
• Flexibility: Any point on the line can be used as (x₁, y₁)
• Conversion: Can convert to slope-intercept (y = mx + b) or standard (Ax + By = C) form
• Slope formula: If given two points, use m = (y₂ - y₁)/(x₂ - x₁)
Rate problems: Modeling constant rate changes where slope represents the rate
Business applications: Cost analysis, profit models, break-even analysis
Scientific models: Linear relationships in physics, chemistry, and biology
Financial planning: Investment growth, loan payments, depreciation