Slope-intercept form: The linear equation written as y = mx + b, where m is the slope and b is the y-intercept
- Identify the slope (m) and y-intercept (b) from the equation y = mx + b
- Plot the y-intercept (0, b) on the y-axis
- Use the slope to find another point: rise/run
- Draw the line through the two points
- Verify by checking additional points
In the equation y = 2x + 3:
Slope (m) = 2 (coefficient of x)
Y-intercept (b) = 3 (constant term)
The y-intercept is the point where the line crosses the y-axis
At the y-intercept, x = 0, so the point is (0, 3)
Slope = rise/run = 2/1
Starting from (0, 3), move up 2 units and right 1 unit
New point: (0+1, 3+2) = (1, 5)
Connect points (0, 3) and (1, 5) with a straight line
Extend the line in both directions
Check point (2, 7): y = 2(2) + 3 = 4 + 3 = 7 ✓
Check point (-1, 1): y = 2(-1) + 3 = -2 + 3 = 1 ✓
Slope: m = 2, Y-intercept: b = 3
The line has slope m = 2 and y-intercept b = 3, passing through points (0, 3), (1, 5), and (2, 7).
• Slope-intercept identification: y = mx + b where m is slope, b is y-intercept
• Y-intercept location: Point (0, b) where line crosses y-axis
• Slope interpretation: Rise over run, indicating steepness and direction
Line equation from slope and y-intercept: Given slope m and y-intercept b, the equation is y = mx + b
Slope (m) = -3
Y-intercept (b) = -2 (from point (0, -2))
The slope-intercept form is y = mx + b
Substituting m = -3 and b = -2:
y = (-3)x + (-2)
y = -3x + (-2)
y = -3x - 2
Check y-intercept: When x = 0, y = -3(0) - 2 = -2 ✓
Check slope: The coefficient of x is -3 ✓
A negative slope (-3) means the line decreases as x increases
For every 1 unit increase in x, y decreases by 3 units
\(y = -3x - 2\)
The equation of the line in slope-intercept form is y = -3x - 2.
• Slope-intercept construction: Directly substitute m and b into y = mx + b
• Negative slope: Indicates decreasing line from left to right
• Verification: Check that the equation passes through given point
Horizontal line: A line with zero slope, parallel to the x-axis, of the form y = b
A horizontal line has slope m = 0
A horizontal line is parallel to the x-axis
All points on the line have the same y-coordinate
The line passes through point (4, 5)
Since it's horizontal, all points have y-coordinate 5
For a horizontal line, y = constant
Since y = 5 for all points on the line: y = 5
y = 5 can be written as y = 0x + 5
Where m = 0 (slope) and b = 5 (y-intercept)
Check point (4, 5): y = 0(4) + 5 = 5 ✓
Check point (0, 5): y = 0(0) + 5 = 5 ✓
Check point (-3, 5): y = 0(-3) + 5 = 5 ✓
\(y = 0x + 5\) or simply \(y = 5\)
The equation of the horizontal line in slope-intercept form is y = 0x + 5 or simply y = 5.
• Horizontal line equation: y = b (constant y-value)
• Slope of horizontal line: m = 0
• Y-intercept: Point where line crosses y-axis
Slope-intercept form: The linear equation written as y = mx + b, where m is the slope and b is the y-intercept
Slope (m): The ratio of vertical change (rise) to horizontal change (run) between any two points on the line
Y-intercept (b): The y-coordinate of the point where the line crosses the y-axis (when x = 0)
Positive slope: Line rises from left to right (m > 0)
Negative slope: Line falls from left to right (m < 0)
Zero slope: Horizontal line (m = 0)
- Identify m and b: From equation y = mx + b
- Plot y-intercept: Point (0, b)
- Use slope: From y-intercept, move according to rise/run
- Draw line: Connect the points with straight line
- Verify: Check additional points satisfy the equation
• Form identification: y = mx + b is slope-intercept form
• Slope interpretation: m > 0 (increasing), m < 0 (decreasing), m = 0 (horizontal)
• Y-intercept location: Point (0, b) where line crosses y-axis
• Slope calculation: m = (y₂ - y₁)/(x₂ - x₁)
Standard form to slope-intercept: Converting Ax + By = C to y = mx + b by solving for y
3x + 4y = 12
Subtract 3x from both sides: 4y = 12 - 3x
Or: 4y = -3x + 12
Divide both sides by 4: y = (-3x + 12)/4
y = -3x/4 + 12/4
y = -3x/4 + 3
y = -3/4x + 3
Or: y = -0.75x + 3
Comparing with y = mx + b:
Slope (m) = -3/4
Y-intercept (b) = 3
Check point (0, 3): 3(0) + 4(3) = 0 + 12 = 12 ✓
Check point (4, 0): 3(4) + 4(0) = 12 + 0 = 12 ✓
\(y = -\frac{3}{4}x + 3\), \(m = -\frac{3}{4}\), \(b = 3\)
The equation in slope-intercept form is \(y = -\frac{3}{4}x + 3\), with slope \(m = -\frac{3}{4}\) and y-intercept \(b = 3\).
• Algebraic manipulation: Isolate y by performing inverse operations
• Standard to slope-intercept: Solve for y in Ax + By = C
• Fraction simplification: Reduce fractions when possible
Real-world linear model: A practical application where slope represents rate of change and y-intercept represents initial value
Let x = number of miles traveled
Let y = total cost of the taxi ride
Base fare (initial cost) = $3
Rate per mile = $2.50 per mile
Total cost = Rate × Miles + Base fare
y = 2.50x + 3
Comparing with y = mx + b:
Slope (m) = 2.50
Y-intercept (b) = 3
m = 2.50 means the cost increases by $2.50 for each additional mile
The slope represents the rate of change of cost with respect to distance
b = 3 means the cost is $3 when x = 0 (before any miles are traveled)
The y-intercept represents the initial cost or base fare
For 2 miles: y = 2.50(2) + 3 = $8
For 5 miles: y = 2.50(5) + 3 = $15.50
\(y = 2.50x + 3\), slope = $2.50/mile, y-intercept = $3
The cost equation is y = 2.50x + 3, where the slope of 2.50 represents $2.50 per mile and the y-intercept of 3 represents the $3 base fare.
• Word problem modeling: Define variables and identify rate/initial value
• Real-world interpretation: Slope = rate of change, y-intercept = initial value
• Practical meaning: Connect mathematical components to real-world context
Slope-intercept form: The linear equation written as y = mx + b, where m is the slope and b is the y-intercept
Slope (m): The ratio of vertical change (rise) to horizontal change (run) between any two points on the line, indicating steepness and direction
Y-intercept (b): The y-coordinate of the point where the line crosses the y-axis (when x = 0)
Positive slope: Line rises from left to right (m > 0), indicating increasing relationship
Negative slope: Line falls from left to right (m < 0), indicating decreasing relationship
Zero slope: Horizontal line (m = 0), indicating no change in y
- Identify form: Recognize y = mx + b format
- Extract parameters: Identify slope m and y-intercept b
- Graph if needed: Plot y-intercept and use slope to find additional points
- Convert if necessary: Change from other forms to slope-intercept
- Interpret meaning: Understand real-world significance of m and b
• Form identification: y = mx + b is slope-intercept form
• Slope interpretation: m > 0 (increasing), m < 0 (decreasing), m = 0 (horizontal)
• Y-intercept location: Point (0, b) where line crosses y-axis
• Slope calculation: m = (y₂ - y₁)/(x₂ - x₁)
• Conversion rule: Solve for y to convert other forms to slope-intercept
Rate problems: Distance, speed, cost calculations where m represents rate and b represents initial value
Business applications: Cost analysis, profit models, break-even analysis
Scientific models: Linear relationships in physics, chemistry, and biology
Financial planning: Interest calculations, budgeting, investment growth