Point-slope form: \(y - y_1 = m(x - x_1)\) where \((x_1, y_1)\) is a point on the line and m is the slope.
- Identify the given point \((x_1, y_1)\) and slope m
- Substitute values into the point-slope formula
- Simplify if needed to convert to other forms
Point: \((x_1, y_1) = (2, 5)\)
Slope: \(m = 3\)
Formula: \(y - y_1 = m(x - x_1)\)
Substituting: \(y - 5 = 3(x - 2)\)
Distribute: \(y - 5 = 3x - 6\)
Add 5 to both sides: \(y = 3x - 6 + 5\)
Result: \(y = 3x - 1\)
Move x term to left: \(-3x + y = -1\)
Multiply by -1 to make x coefficient positive: \(3x - y = 1\)
Slope-intercept: \(y = 3x - 1\)
Standard: \(3x - y = 1\)
Point-slope: \(y - 5 = 3(x - 2)\)
Slope-intercept: \(y = 3x - 1\)
Standard: \(3x - y = 1\)
• Point-slope form: Directly uses given point and slope
• Distribution: Distribute slope to eliminate parentheses
• Standard form convention: Make x coefficient positive
Two-point form: First find slope using \(m = \frac{y_2 - y_1}{x_2 - x_1}\), then use point-slope form.
Formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)
Substituting: \(m = \frac{10 - 4}{3 - 1} = \frac{6}{2} = 3\)
Using point (1, 4): \(y - 4 = 3(x - 1)\)
Distribute: \(y - 4 = 3x - 3\)
Add 4 to both sides: \(y = 3x - 3 + 4\)
Result: \(y = 3x + 1\)
Move x term to left: \(-3x + y = 1\)
Multiply by -1: \(3x - y = -1\)
Check point (3, 10): \(y = 3(3) + 1 = 9 + 1 = 10\) ✓
Slope-intercept: \(y = 3x + 1\)
Standard: \(3x - y = -1\)
Point-slope: \(y - 4 = 3(x - 1)\)
Slope-intercept: \(y = 3x + 1\)
Standard: \(3x - y = -1\)
• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)
• Point selection: Either point works for point-slope form
• Verification: Check with the other point
Slope-intercept form: \(y = mx + b\) where m is the slope and b is the y-intercept.
Slope: \(m = -2\)
y-intercept: \(b = 5\)
Formula: \(y = mx + b\)
Substituting: \(y = -2x + 5\)
From slope-intercept, y-intercept gives us point (0, 5)
Point-slope: \(y - 5 = -2(x - 0)\) or \(y - 5 = -2x\)
Move x term to left: \(2x + y = 5\)
This is already in standard form with positive x coefficient
Set \(x = 0\): \(y = -2(0) + 5 = 5\) ✓
Point-slope: \(y - 5 = -2x\)
Standard: \(2x + y = 5\)
Slope-intercept: \(y = -2x + 5\)
Point-slope: \(y - 5 = -2x\)
Standard: \(2x + y = 5\)
• Slope-intercept form: Directly uses slope and y-intercept
• Y-intercept interpretation: Point (0, b)
• Standard form: Rearrange to get Ax + By = C
Linear equation: An equation whose graph is a straight line
Slope (m): The rate of change, calculated as rise over run
Y-intercept (b): The y-value where the line crosses the y-axis
X-intercept: The x-value where the line crosses the x-axis
- Point-slope to slope-intercept: Distribute and solve for y
- Slope-intercept to standard: Move x term to left side
- Standard to slope-intercept: Solve for y
- Any form to another: Use algebraic manipulation
• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)
• Point-slope: \(y - y_1 = m(x - x_1)\)
• Slope-intercept: \(y = mx + b\)
• Standard: \(Ax + By = C\) where A ≥ 0
• Conversion: Use inverse operations to rearrange equations
Horizontal line: A line with slope 0, equation form y = constant
Vertical line: A line with undefined slope, equation form x = constant
A horizontal line has slope m = 0
All points on the line have the same y-coordinate
Since it passes through (4, -3), y-coordinate is always -3
Horizontal line: \(y = -3\)
This cannot be written in slope-intercept form because slope is 0
A vertical line has undefined slope
All points on the line have the same x-coordinate
Since it passes through (-2, 7), x-coordinate is always -2
Vertical line: \(x = -2\)
This cannot be written in slope-intercept form because y is not determined by x
Horizontal line: slope = 0, y-intercept exists
Vertical line: slope undefined, no y-intercept (except if x = 0)
Vertical: \(x = -2\)
Horizontal line: \(y = -3\)
Vertical line: \(x = -2\)
• Horizontal lines: y = constant, slope = 0
• Vertical lines: x = constant, slope undefined
• Special cases: Cannot use standard forms with slope
Converting forms: Using algebraic manipulation to rewrite equations while preserving their meaning.
Given: \(2x - 3y = 6\)
Subtract 2x from both sides: \(-3y = -2x + 6\)
Divide by -3: \(y = \frac{-2x + 6}{-3}\)
Simplify: \(y = \frac{2}{3}x - 2\)
In slope-intercept form \(y = mx + b\), y-intercept is b
y-intercept: (0, -2)
Set y = 0 in original equation: \(2x - 3(0) = 6\)
Solve: \(2x = 6\), so \(x = 3\)
x-intercept: (3, 0)
Check x-intercept: \(0 = \frac{2}{3}(3) - 2 = 2 - 2 = 0\) ✓
Check y-intercept: \(y = \frac{2}{3}(0) - 2 = -2\) ✓
x-intercept: (3, 0)
y-intercept: (0, -2)
Slope-intercept: \(y = \frac{2}{3}x - 2\)
x-intercept: (3, 0)
y-intercept: (0, -2)
• Algebraic manipulation: Perform same operation on both sides
• Intercept identification: Set opposite variable to zero
• Fraction simplification: Divide each term in numerator by denominator
Linear equation: An equation of degree one that graphs as a straight line. General form: \(Ax + By = C\)
Slope (m): The steepness of a line, calculated as \(\frac{\text{rise}}{\text{run}} = \frac{y_2 - y_1}{x_2 - x_1}\)
Y-intercept (b): The point where the line crosses the y-axis (where x = 0)
X-intercept: The point where the line crosses the x-axis (where y = 0)
Point-slope form: \(y - y_1 = m(x - x_1)\), uses a known point and slope
Slope-intercept form: \(y = mx + b\), shows slope and y-intercept directly
Standard form: \(Ax + By = C\), where A, B, and C are integers and A ≥ 0
- Identify given information: Determine what is provided (points, slope, intercepts)
- Select appropriate form: Choose form based on available information
- Write the equation: Substitute known values into chosen form
- Convert if needed: Transform to required form using algebra
- Verify solution: Check that the equation satisfies given conditions
• Slope formula: \(m = \frac{y_2 - y_1}{x_2 - x_1}\)
• Point-slope to slope-intercept: Distribute m and solve for y
• Standard to slope-intercept: Solve for y: \(y = -\frac{A}{B}x + \frac{C}{B}\)
• Slope-intercept to standard: Move x term to left: \(-mx + y = b\), then multiply to eliminate fractions
• X-intercept: Set y = 0 and solve for x
• Y-intercept: Set x = 0 and solve for y
\(f_1(x): y - 2 = 3(x - 1)\) (Point-slope)
\(f_2(x): y = -\frac{1}{2}x + 4\) (Slope-intercept)
\(f_3(x): 2x + 3y = 6\) (Standard form)
Analysis: The chart shows how the same line can be represented in different forms.
- \(f_1(x): y - 2 = 3(x - 1) \rightarrow y = 3x - 1\) (Point-slope to slope-intercept)
- \(f_2(x): y = -\frac{1}{2}x + 4\) (Already in slope-intercept form)
- \(f_3(x): 2x + 3y = 6 \rightarrow y = -\frac{2}{3}x + 2\) (Standard to slope-intercept)