Solved Exercises on Mean Value Theorem

Master the Mean Value Theorem: conditions, applications, and geometric interpretations through these 5 detailed exercises with comprehensive explanations.

Solution: Exercises 1 to 3
1 Verifying Mean Value Theorem
Exercise 1
Verify that the Mean Value Theorem applies to \(f(x) = x^2 - 4x + 3\) on the interval [1, 4]. Then find the value c guaranteed by the theorem.
Definition:

Mean Value Theorem: If f is continuous on [a, b] and differentiable on (a, b), then there exists at least one number c in (a, b) such that:

\(f'(c) = \frac{f(b) - f(a)}{b - a}\)

This means there exists a point where the instantaneous rate of change equals the average rate of change over the interval.

Verification and solution method:
  1. Check continuity on [a, b]
  2. Check differentiability on (a, b)
  3. Calculate the average rate of change: \(\frac{f(b) - f(a)}{b - a}\)
  4. Find f'(x)
  5. Solve f'(c) = average rate of change for c
  6. Verify that c is in the open interval (a, b)
Function
\(f(x) = x^2 - 4x + 3\)
Derivative
\(f'(x) = 2x - 4\)
Value of c
\(c = 2.5\)
Step 1: Verify conditions

• Continuity: f(x) = x² - 4x + 3 is a polynomial, so it's continuous everywhere, including on [1, 4]

• Differentiability: f'(x) = 2x - 4 exists everywhere, so f is differentiable on (1, 4)

Step 2: Calculate f(a) and f(b)

• f(1) = (1)² - 4(1) + 3 = 1 - 4 + 3 = 0

• f(4) = (4)² - 4(4) + 3 = 16 - 16 + 3 = 3

Step 3: Calculate the average rate of change

\(\frac{f(b) - f(a)}{b - a} = \frac{f(4) - f(1)}{4 - 1} = \frac{3 - 0}{3} = 1\)

Step 4: Find the derivative

\(f'(x) = 2x - 4\)

Step 5: Set f'(c) equal to average rate of change

\(f'(c) = 1\)

\(2c - 4 = 1\)

\(2c = 5\)

\(c = 2.5\)

Step 6: Verify that c is in the interval (1, 4)

Since 1 < 2.5 < 4, c = 2.5 is in the open interval (1, 4)

Step 7: Verify the result

\(f'(2.5) = 2(2.5) - 4 = 5 - 4 = 1\) ✓

This matches the average rate of change.

\(c = 2.5\), and \(f'(2.5) = 1 = \frac{f(4) - f(1)}{4 - 1}\)
Final answer:

The Mean Value Theorem applies to f(x) = x² - 4x + 3 on [1, 4], and c = 2.5 is the value guaranteed by the theorem.

Applied concepts:

• Continuity check: Polynomials are continuous everywhere

• Differentiability check: Polynomials are differentiable everywhere

• Geometric interpretation: At x = c, the tangent line is parallel to the secant line through (a, f(a)) and (b, f(b))

2 Motion application
Exercise 2
A car travels 120 miles in 2 hours. Show that at some point during the trip, the car's speed was exactly 60 mph.
Definition:

Physical interpretation: The Mean Value Theorem states that if a function is continuous and differentiable, then somewhere in the interval, the instantaneous rate of change equals the average rate of change.

Position function
\(s(t)\) where \(s(0) = 0, s(2) = 120\)
Average velocity
\(\frac{120-0}{2-0} = 60 \text{ mph}\)
Instantaneous velocity
\(s'(c) = 60 \text{ mph for some } c \in (0,2)\)
Step 1: Set up the problem

Let s(t) = position of the car at time t

Given: s(0) = 0 miles (starting position), s(2) = 120 miles (ending position after 2 hours)

Step 2: Identify the function and interval

We apply the Mean Value Theorem to s(t) on the interval [0, 2]

Step 3: Check conditions

• Continuity: The position function s(t) is continuous (the car doesn't teleport)

• Differentiability: The velocity s'(t) exists (the car doesn't move discontinuously)

Step 4: Calculate the average velocity

Average velocity = \(\frac{\text{total displacement}}{\text{total time}} = \frac{s(2) - s(0)}{2 - 0} = \frac{120 - 0}{2} = 60\) mph

Step 5: Apply the Mean Value Theorem

By the Mean Value Theorem, there exists at least one time c in (0, 2) such that:

\(s'(c) = \frac{s(2) - s(0)}{2 - 0} = 60\) mph

Step 6: Interpret the result

Since s'(t) represents the velocity at time t, this means at time c, the car's speed was exactly 60 mph.

Step 7: Conclusion

Therefore, at some point during the 2-hour journey, the car's speed was exactly 60 mph.

By MVT: \(\exists c \in (0,2) \text{ such that } s'(c) = 60 \text{ mph}\)
Final answer:

Yes, by the Mean Value Theorem, there must be at least one time during the trip when the car's speed was exactly 60 mph.

Applied concepts:

• Position-velocity relationship: Velocity is the derivative of position

• Real-world application: MVT guarantees that instantaneous velocity equals average velocity at some point

• Physical plausibility: Assumes realistic motion (no teleportation, no infinite accelerations)

3 Temperature change application
Exercise 3
The temperature T (in °C) changes from 20°C to 32°C over a 4-hour period. Prove that at some moment during this period, the rate of temperature change was exactly 3°C/hour.
Definition:

Rate of change: The derivative of a function represents the instantaneous rate of change. The Mean Value Theorem guarantees that this instantaneous rate equals the average rate at some point in the interval.

Temperature function
\(T(t)\) where \(T(0) = 20, T(4) = 32\)
Average rate
\(\frac{32-20}{4-0} = 3 \text{ °C/hour}\)
Instantaneous rate
\(T'(c) = 3 \text{ °C/hour for some } c \in (0,4)\)
Step 1: Define the function

Let T(t) = temperature at time t hours

Initial condition: T(0) = 20°C

Final condition: T(4) = 32°C

Step 2: Calculate average rate of change

Average rate of change = \(\frac{T(4) - T(0)}{4 - 0} = \frac{32 - 20}{4} = \frac{12}{4} = 3\) °C/hour

Step 3: Check conditions for MVT

• Continuity: Temperature changes continuously (no jumps)

• Differentiability: Temperature changes smoothly (rate of change exists)

Step 4: Apply the Mean Value Theorem

By the Mean Value Theorem, there exists at least one time c in (0, 4) such that:

\(T'(c) = \frac{T(4) - T(0)}{4 - 0} = 3\) °C/hour

Step 5: Interpret the result

Since T'(t) represents the rate of temperature change at time t, this means at time c, the rate of temperature change was exactly 3°C/hour.

Step 6: Verify physical meaning

The theorem guarantees that at some point during the 4-hour period, the temperature was increasing at exactly the average rate of 3°C per hour.

By MVT: \(\exists c \in (0,4) \text{ such that } T'(c) = 3 \text{ °C/hour}\)
Final answer:

Yes, by the Mean Value Theorem, there must be at least one moment during the 4-hour period when the rate of temperature change was exactly 3°C/hour.

Applied concepts:

• Rate interpretation: T'(t) represents instantaneous rate of temperature change

• Continuity assumption: Physical quantities like temperature change continuously

• Existence guarantee: MVT ensures a specific rate occurred at some point

Mean Value Theorem: Theory and Applications
\(f'(c) = \frac{f(b) - f(a)}{b - a} \text{ for some } c \in (a,b)\)
Mean Value Theorem Statement
Rolle's Theorem
If \(f(a) = f(b)\), then \(f'(c) = 0\)
Special case of MVT
Average Rate
\(\frac{f(b) - f(a)}{b - a}\)
Slope of secant line
Instantaneous Rate
\(f'(c)\)
Slope of tangent line
Conditions
Continuous on [a,b], Differentiable on (a,b)
Required for MVT
Geometric
Tangent parallel to secant
Visual interpretation
Physical
Instantaneous = Average
Rate equality
Key concepts:

Existence theorem: The Mean Value Theorem guarantees the existence of a point c with a specific property, but doesn't tell us how to find it.

Geometric interpretation: There exists a point where the tangent line is parallel to the secant line connecting the endpoints.

Physical interpretation: At some point, the instantaneous rate of change equals the average rate of change.

Continuity requirement: The function must be continuous on the closed interval [a, b].

Differentiability requirement: The function must be differentiable on the open interval (a, b).

Applications: Proving inequalities, establishing properties of functions, proving other theorems, analyzing motion, rate problems.
Limitations: Only guarantees existence, doesn't provide uniqueness, requires specific conditions to hold.
Solution: Exercises 4 to 5
4 When MVT doesn't apply
Exercise 4
Explain why the Mean Value Theorem does not apply to \(f(x) = |x|\) on the interval [-1, 1].
Definition:

Conditions for MVT: The Mean Value Theorem requires that f(x) be continuous on [a, b] and differentiable on (a, b). If either condition fails, the theorem doesn't apply.

Function
\(f(x) = |x|\)
Continuity
Continuous on [-1,1]
Differentiability
Not differentiable at x=0
Step 1: Check continuity on [-1, 1]

The absolute value function f(x) = |x| is continuous everywhere, including on the interval [-1, 1].

Step 2: Check differentiability on (-1, 1)

We need to check if f(x) = |x| is differentiable at x = 0 (the only problematic point in (-1, 1)).

Step 3: Analyze the derivative at x = 0

Left-hand derivative at x = 0: \(\lim_{h \to 0^-} \frac{|0+h| - |0|}{h} = \lim_{h \to 0^-} \frac{-h}{h} = -1\)

Right-hand derivative at x = 0: \(\lim_{h \to 0^+} \frac{|0+h| - |0|}{h} = \lim_{h \to 0^+} \frac{h}{h} = 1\)

Since the left-hand and right-hand derivatives are not equal, f'(0) does not exist.

Step 4: Apply the Mean Value Theorem conditions

• Continuity: Satisfied on [-1, 1]

• Differentiability: NOT satisfied on (-1, 1) because f'(0) does not exist

Step 5: Conclusion

Since the function is not differentiable on the entire open interval (-1, 1), the Mean Value Theorem does not apply.

Step 6: Demonstrate why it fails

Even if we tried to find a value c where \(f'(c) = \frac{f(1) - f(-1)}{1 - (-1)} = \frac{1 - 1}{2} = 0\), we would fail because:

  • For x > 0: f'(x) = 1
  • For x < 0: f'(x) = -1
  • At x = 0: f'(x) is undefined

Therefore, there is no point in (-1, 1) where f'(c) = 0.

MVT fails because f(x) = |x| is not differentiable at x = 0 ∈ (-1,1)
Final answer:

The Mean Value Theorem does not apply to f(x) = |x| on [-1, 1] because the function is not differentiable at x = 0, which is in the open interval (-1, 1).

Applied concepts:

• Continuity vs. differentiability: A function can be continuous but not differentiable

• Corner points: Absolute value function has a corner where derivative doesn't exist

• Necessary conditions: Both conditions must be satisfied for MVT to apply

5 Proving inequalities
Exercise 5
Use the Mean Value Theorem to prove that for any x > 0, \(\ln(1 + x) < x\).
Definition:

Inequality proofs using MVT: The Mean Value Theorem can be used to establish inequalities by comparing the instantaneous rate of change to the average rate of change.

Function
\(f(t) = \ln(1 + t)\)
Derivative
\(f'(t) = \frac{1}{1 + t}\)
Application
\(\ln(1+x) = \frac{x}{1+c} < x\) for some \(c \in (0,x)\)
Step 1: Set up the function and interval

Let f(t) = ln(1 + t) and consider the interval [0, x] where x > 0.

Step 2: Verify MVT conditions

• Continuity: f(t) = ln(1 + t) is continuous for t > -1, so it's continuous on [0, x]

• Differentiability: f'(t) = 1/(1 + t) exists for t > -1, so f is differentiable on (0, x)

Step 3: Apply the Mean Value Theorem

By MVT, there exists c ∈ (0, x) such that:

\(f'(c) = \frac{f(x) - f(0)}{x - 0}\)

\(\frac{1}{1 + c} = \frac{\ln(1 + x) - \ln(1 + 0)}{x}\)

\(\frac{1}{1 + c} = \frac{\ln(1 + x) - \ln(1)}{x}\)

\(\frac{1}{1 + c} = \frac{\ln(1 + x) - 0}{x}\)

\(\frac{1}{1 + c} = \frac{\ln(1 + x)}{x}\)

Step 4: Analyze the relationship

Since c ∈ (0, x), we have 0 < c < x

Therefore: 1 < 1 + c < 1 + x

Taking reciprocals (and flipping inequalities): \(\frac{1}{1 + x} < \frac{1}{1 + c} < 1\)

Step 5: Complete the proof

From Step 3: \(\frac{1}{1 + c} = \frac{\ln(1 + x)}{x}\)

From Step 4: \(\frac{1}{1 + c} < 1\)

Therefore: \(\frac{\ln(1 + x)}{x} < 1\)

Multiplying both sides by x > 0: \(\ln(1 + x) < x\)

Step 6: Verify the inequality is strict

Since c > 0, we have 1 + c > 1, so \(\frac{1}{1 + c} < 1\)

This makes the inequality strict: \(\ln(1 + x) < x\)

For x > 0: \(\ln(1 + x) < x\) proven using MVT
Final answer:

Using the Mean Value Theorem, we have proven that for any x > 0, \(\ln(1 + x) < x\).

Applied concepts:

• Inequality manipulation: Carefully handling inequalities when taking reciprocals

• Function selection: Choosing f(t) = ln(1 + t) to match the inequality

• Interval choice: Using [0, x] to connect the function value at 0 and x

Comprehensive Summary: Mean Value Theorem
\(\text{If } f \in C[a,b] \cap D(a,b), \text{ then } \exists c \in (a,b) : f'(c) = \frac{f(b) - f(a)}{b - a}\)
Formal Statement of MVT
Key definitions:

Mean Value Theorem: A fundamental theorem stating that for a function continuous on [a,b] and differentiable on (a,b), there exists a point where the instantaneous rate of change equals the average rate of change.

Rolle's Theorem: A special case of MVT where f(a) = f(b), guaranteeing a point where f'(c) = 0.

Continuity: A function is continuous on [a,b] if there are no breaks, jumps, or holes in the interval.

Differentiability: A function is differentiable on (a,b) if the derivative exists at every point in the open interval.

Complete methodology for MVT problems:
  1. Verify conditions: Check continuity on [a,b] and differentiability on (a,b)
  2. Calculate average rate: Compute \(\frac{f(b) - f(a)}{b - a}\)
  3. Find derivative: Calculate f'(x)
  4. Solve equation: Set f'(c) equal to the average rate and solve for c
  5. Verify solution: Ensure c is in the open interval (a,b)
  6. Interpret result: Understand the geometric or physical meaning
Tip 1: Always verify both conditions (continuity and differentiability) before applying MVT.
Tip 2: MVT guarantees existence of c but doesn't guarantee uniqueness.
Tip 3: Look for points of non-differentiability like corners, cusps, or vertical tangents.
Tip 4: MVT is often used to prove other theorems and inequalities in calculus.
Common applications: Proving inequalities, establishing function properties, analyzing motion problems, proving other theorems (like Fundamental Theorem of Calculus).
Geometric insight: The theorem ensures that somewhere between two points, the tangent line is parallel to the secant line connecting those points.
Essential properties and corollaries:

• Constant functions: If f'(x) = 0 on (a,b), then f is constant on [a,b]

• Increasing functions: If f'(x) > 0 on (a,b), then f is increasing on [a,b]

• Decreasing functions: If f'(x) < 0 on (a,b), then f is decreasing on [a,b]

• Equality of derivatives: If f'(x) = g'(x) on (a,b), then f(x) = g(x) + C on [a,b]

\(\text{Corollary: } f'(x) = g'(x) \Rightarrow f(x) - g(x) = \text{constant}\)
Important Corollary of MVT
Examples of MVT applications:

Example 1: Proving \(\sin(x) \leq x\) for \(x \geq 0\)

Example 2: Showing that if \(f'(x) = 0\) everywhere, then \(f\) is constant

Example 3: Establishing the relationship between position, velocity, and average velocity

Example 4: Proving the limit \(\lim_{x \to 0} \frac{\sin(x)}{x} = 1\) (with additional analysis)

Visualization: Mean Value Theorem Applications
Exercise 6: Function Behavior Analysis
Compare the function \(f(x) = x^2\) on [1, 3] with its average rate of change and tangent lines:

Analysis: The chart shows how the function, its tangent lines, and average rate of change are related through the Mean Value Theorem.

  • The secant line connects the endpoints of the interval
  • At the MVT point, the tangent line is parallel to the secant line
  • This demonstrates the geometric interpretation of the theorem

Questions & Answers

Question: What's the difference between Rolle's Theorem and the Mean Value Theorem? When would I use each one?

Answer: Rolle's Theorem is a special case of the Mean Value Theorem:

Rolle's Theorem:

  • Conditions: f is continuous on [a,b], differentiable on (a,b), AND f(a) = f(b)
  • Conclusion: There exists c ∈ (a,b) such that f'(c) = 0
  • Geometric meaning: Horizontal tangent at some point between equal function values

Mean Value Theorem:

  • Conditions: f is continuous on [a,b], differentiable on (a,b)
  • Conclusion: There exists c ∈ (a,b) such that f'(c) = [f(b) - f(a)] / (b - a)
  • Geometric meaning: Tangent parallel to secant line at some point

Use Rolle's Theorem when the function has the same value at both endpoints (f(a) = f(b)). Use the Mean Value Theorem in more general situations where you want to relate instantaneous and average rates of change.

Rolle's Theorem is often used as a stepping stone in proving the Mean Value Theorem.

Question: How do I know if a function is differentiable at a point? What makes a function not differentiable?

Answer: A function f(x) is differentiable at x = a if the limit \(\lim_{h \to 0} \frac{f(a+h) - f(a)}{h}\) exists.

A function is NOT differentiable at a point when:

  • Corners or cusps: Like f(x) = |x| at x = 0, where left and right derivatives are different
  • Vertical tangents: Where the slope approaches infinity, like f(x) = x^(1/3) at x = 0
  • Discontinuities: Jump discontinuities, removable discontinuities, or infinite discontinuities
  • Sharp turns: Points where the function changes direction abruptly

Checking differentiability:

  • Compute the left-hand derivative: \(\lim_{h \to 0^-} \frac{f(a+h) - f(a)}{h}\)
  • Compute the right-hand derivative: \(\lim_{h \to 0^+} \frac{f(a+h) - f(a)}{h}\)
  • If both limits exist and are equal, the function is differentiable at x = a

For the Mean Value Theorem, the function must be differentiable on the entire open interval (a,b).

Question: Can there be more than one value of c that satisfies the Mean Value Theorem? How do I find all possible values?

Answer: Yes, there can be multiple values of c that satisfy the Mean Value Theorem. The theorem only guarantees the existence of at least one such value, not uniqueness.

Examples of multiple values:

  • For f(x) = sin(x) on [0, 2π]: The average rate of change is 0, and f'(x) = cos(x) = 0 at x = π/2 and x = 3π/2
  • For functions with multiple peaks and valleys, several points may have the same slope as the secant line

Finding all possible values:

  1. Solve f'(x) = [f(b) - f(a)] / (b - a) for x
  2. Check which solutions lie in the open interval (a, b)
  3. Verify that each solution satisfies the equation

Geometric interpretation: The theorem guarantees that at least one tangent line is parallel to the secant line, but there might be multiple such tangent lines.

For practical problems, finding one value of c is usually sufficient to demonstrate the theorem's applicability, but in theoretical contexts, identifying all possible values may be important.

Question: How is the Mean Value Theorem used in real-world applications? Where would I actually encounter this in practice?

Answer: The Mean Value Theorem has numerous practical applications:

  • Physics: If a car travels 60 miles in 1 hour, MVT guarantees that at some point the speedometer read exactly 60 mph
  • Economics: If average profit per unit sold is $10, then at some production level, the marginal profit is exactly $10
  • Engineering: In control systems, MVT helps analyze rates of change in feedback loops
  • Medicine: If a patient's temperature changed by 3°C over 2 hours, MVT ensures the rate of change was exactly 1.5°C/hour at some moment
  • Computer Science: In algorithm analysis, MVT helps understand average-case vs. worst-case performance

More importantly, MVT is fundamental in proving other important theorems like the Fundamental Theorem of Calculus, L'Hôpital's Rule, and Taylor's Theorem. It's a cornerstone of calculus theory that enables many advanced applications.

In pure mathematics, MVT is used to prove that functions with zero derivatives are constant, and to establish many important inequalities.

Question: What's the relationship between the Mean Value Theorem and other existence theorems like the Intermediate Value Theorem?

Answer: These are all fundamental existence theorems in calculus with different purposes:

  • Intermediate Value Theorem (IVT): If f is continuous on [a,b] and N is between f(a) and f(b), then there exists c ∈ [a,b] such that f(c) = N
  • Mean Value Theorem (MVT): If f is continuous on [a,b] and differentiable on (a,b), then there exists c ∈ (a,b) such that f'(c) = [f(b) - f(a)] / (b - a)
  • Rolle's Theorem: Special case of MVT where f(a) = f(b), so f'(c) = 0

Relationships:

  • IVT deals with function values (y-coordinates)
  • MVT deals with derivative values (slopes)
  • Both require continuity, but MVT has the additional differentiability requirement
  • IVT is about hitting intermediate values; MVT is about matching average rates

All three theorems are fundamental results that guarantee the existence of certain points with specific properties, forming the theoretical foundation for calculus applications.