Solved Exercises on Continuity at a Point in Differential Calculus

Master continuity at a point: definition, conditions, discontinuities, and applications through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic continuity check
Exercise 1
Determine if the function \(f(x) = x^2 + 3x - 2\) is continuous at \(x = 2\). Justify your answer using the definition of continuity.
Definition:

Continuity at a point: A function \(f(x)\) is continuous at \(x = a\) if and only if all three conditions are satisfied:

1. \(f(a)\) exists (the function is defined at \(a\))

2. \(\lim_{x \to a} f(x)\) exists (the limit exists at \(a\))

3. \(\lim_{x \to a} f(x) = f(a)\) (limit equals function value)

Method for checking continuity:
  1. Calculate \(f(a)\) - check if function is defined at the point
  2. Calculate \(\lim_{x \to a} f(x)\) - find the limit at the point
  3. Compare \(\lim_{x \to a} f(x)\) with \(f(a)\) - verify equality
Important Rules:

• Polynomial functions are continuous everywhere

• Rational functions are continuous except where denominator is zero

• Composition of continuous functions is continuous

Step 1: Check f(a)
\(f(2) = 2^2 + 3(2) - 2\)
Step 2: Calculate limit
\(\lim_{x \to 2}(x^2 + 3x - 2)\)
Step 3: Compare
\(\lim_{x \to 2} f(x) = f(2)?\)
Step 1: Calculate f(2)

\(f(2) = (2)^2 + 3(2) - 2 = 4 + 6 - 2 = 8\)

✓ Since we get a finite number, condition 1 is satisfied.

Step 2: Calculate the limit

Since \(f(x) = x^2 + 3x - 2\) is a polynomial, it's continuous everywhere.

Therefore: \(\lim_{x \to 2}(x^2 + 3x - 2) = 2^2 + 3(2) - 2 = 8\)

✓ The limit exists and equals 8, so condition 2 is satisfied.

Step 3: Verify the third condition

We found: \(\lim_{x \to 2} f(x) = 8\) and \(f(2) = 8\)

Since \(\lim_{x \to 2} f(x) = f(2)\), condition 3 is satisfied.

Key Notes:

• Polynomials are continuous everywhere because they satisfy all three conditions for any real number

• Direct substitution works for polynomials since they're continuous

• All three conditions must be met for continuity

The function \(f(x) = x^2 + 3x - 2\) is continuous at \(x = 2\).
Final answer:

Yes, \(f(x) = x^2 + 3x - 2\) is continuous at \(x = 2\) because all three conditions of continuity are satisfied.

Applied rules:

• Definition of continuity: All three conditions must be met

• Polynomial continuity: Polynomials are continuous everywhere

• Direct substitution: For continuous functions, limit equals function value

2 Discontinuity analysis
Exercise 2
Analyze the continuity of the piecewise function:
\(f(x) = \begin{cases} x + 1 & \text{if } x < 2 \\ 5 & \text{if } x = 2 \\ x^2 - 1 & \text{if } x > 2 \end{cases}\)
at \(x = 2\).
Definition:

Types of discontinuities:

• Removable: Limit exists but ≠ f(a) or f(a) undefined

• Jump: Left and right limits exist but are different

• Infinite: At least one one-sided limit is infinite

• Oscillating: Function oscillates infinitely near the point

Analysis for piecewise functions:
  1. Calculate left-hand limit: \(\lim_{x \to a^-} f(x)\)
  2. Calculate right-hand limit: \(\lim_{x \to a^+} f(x)\)
  3. Find f(a) from the piecewise definition
  4. Compare all three values
Left limit
\(\lim_{x \to 2^-} f(x)\)
Right limit
\(\lim_{x \to 2^+} f(x)\)
Function value
\(f(2)\)
Step 1: Calculate left-hand limit

As \(x \to 2^-\), we use \(f(x) = x + 1\):

\(\lim_{x \to 2^-} f(x) = \lim_{x \to 2^-} (x + 1) = 2 + 1 = 3\)

Step 2: Calculate right-hand limit

As \(x \to 2^+\), we use \(f(x) = x^2 - 1\):

\(\lim_{x \to 2^+} f(x) = \lim_{x \to 2^+} (x^2 - 1) = 2^2 - 1 = 4 - 1 = 3\)

Step 3: Find f(2)

From the piecewise definition: \(f(2) = 5\)

Step 4: Compare values

\(\lim_{x \to 2^-} f(x) = 3\)

\(\lim_{x \to 2^+} f(x) = 3\)

So \(\lim_{x \to 2} f(x) = 3\)

But \(f(2) = 5\)

Since \(\lim_{x \to 2} f(x) \neq f(2)\), the function is discontinuous at \(x = 2\)

Key Notes:

• Jump discontinuity occurs when left and right limits exist but are different

• Removable discontinuity occurs when limit exists but doesn't equal function value

• Always check both sides for piecewise functions

The function has a removable discontinuity at \(x = 2\).
Final answer:

The function is discontinuous at \(x = 2\) because \(\lim_{x \to 2} f(x) = 3 \neq f(2) = 5\). This is a removable discontinuity.

Applied rules: Applied rules:

• One-sided limits: Use appropriate piece for each side

• Continuity condition: Limit must equal function value

• Discontinuity classification: Based on which condition fails

3 Infinite discontinuity
Exercise 3
Determine the continuity of \(f(x) = \frac{1}{x-3}\) at \(x = 3\). Classify the type of discontinuity if it exists.
Definition:

Rational functions: \(f(x) = \frac{P(x)}{Q(x)}\) where P and Q are polynomials. Discontinuous where \(Q(x) = 0\).

Infinite discontinuity: Occurs when \(\lim_{x \to a} f(x) = \pm\infty\).

Analysis for rational functions:
  1. Find where denominator equals zero
  2. Calculate one-sided limits at those points
  3. Determine the type of discontinuity
Expression
\(f(x) = \frac{1}{x-3}\)
Denominator zero
\(x - 3 = 0\)
Discontinuity at
\(x = 3\)
Step 1: Identify where function is undefined

The denominator is zero when \(x - 3 = 0\), so \(x = 3\)

Since division by zero is undefined, \(f(3)\) does not exist

This violates condition 1 of continuity

Step 2: Calculate left-hand limit

\(\lim_{x \to 3^-} \frac{1}{x-3}\)

As \(x \to 3^-\), \(x - 3 \to 0^-\) (negative and approaching 0)

So \(\frac{1}{x-3} \to -\infty\)

Therefore: \(\lim_{x \to 3^-} \frac{1}{x-3} = -\infty\)

Step 3: Calculate right-hand limit

\(\lim_{x \to 3^+} \frac{1}{x-3}\)

As \(x \to 3^+\), \(x - 3 \to 0^+\) (positive and approaching 0)

So \(\frac{1}{x-3} \to +\infty\)

Therefore: \(\lim_{x \to 3^+} \frac{1}{x-3} = +\infty\)

Step 4: Conclusion

Since \(f(3)\) is undefined, the function is discontinuous at \(x = 3\)

Since both one-sided limits approach infinity, this is an infinite discontinuity

Key Notes:

• Rational functions are continuous except where denominator is zero

• Infinite discontinuities create vertical asymptotes

• Vertical asymptote at \(x = 3\) indicates infinite discontinuity

\(f(x) = \frac{1}{x-3}\) has an infinite discontinuity at \(x = 3\).
Final answer:

The function \(f(x) = \frac{1}{x-3}\) is discontinuous at \(x = 3\) because \(f(3)\) is undefined and both one-sided limits approach infinity. This is an infinite discontinuity (vertical asymptote).

Applied rules:

• Rational function discontinuities: Occur where denominator is zero

• Infinite limits: Lead to infinite discontinuities

• Vertical asymptotes: Graphical representation of infinite discontinuities

Rules and methods, laws,...
\(\lim_{x \to a} f(x) = f(a)\)
Continuity Condition
Key definitions:

Continuity at a point: A function f is continuous at x = a if: f(a) exists, lim f(x) exists, and lim f(x) = f(a)

Continuity on an interval: A function is continuous on an interval if it's continuous at every point in the interval

Removable discontinuity: A discontinuity where lim f(x) exists but ≠ f(a) or f(a) is undefined

Condition 1
\(f(a) \text{ exists}\)
Function is defined at a
Condition 2
\(\lim_{x \to a} f(x) \text{ exists}\)
Limit exists at a
Condition 3
\(\lim_{x \to a} f(x) = f(a)\)
Limit equals function value
Types of Discontinuities:

Removable: \(\lim_{x \to a} f(x)\) exists but ≠ f(a) or f(a) undefined

Jump: Left and right limits exist but are different

Infinite: At least one one-sided limit is ±∞

Oscillating: Function oscillates infinitely near the point

Steps to Test Continuity:
  1. Check if f(a) exists (function is defined at the point)
  2. Calculate \(\lim_{x \to a} f(x)\) (check if limit exists)
  3. Verify that \(\lim_{x \to a} f(x) = f(a)\) (limit equals function value)
  4. If all conditions hold, function is continuous; otherwise, discontinuous
Solution: Exercises 4 to 5
4 Jump discontinuity
Exercise 4
Determine the continuity of the function:
\(f(x) = \begin{cases} x^2 & \text{if } x \leq 1 \\ 2x + 1 & \text{if } x > 1 \end{cases}\)
at \(x = 1\).
Definition:

Jump discontinuity: Occurs when \(\lim_{x \to a^-} f(x)\) and \(\lim_{x \to a^+} f(x)\) both exist but are not equal.

Left-continuous: If \(\lim_{x \to a^-} f(x) = f(a)\)

Right-continuous: If \(\lim_{x \to a^+} f(x) = f(a)\)

Analysis for jump discontinuities:
  1. Calculate \(\lim_{x \to a^-} f(x)\) using the left piece
  2. Calculate \(\lim_{x \to a^+} f(x)\) using the right piece
  3. Find f(a) from the appropriate piece
  4. Compare the values to identify the discontinuity type
Left limit
\(\lim_{x \to 1^-} x^2\)
Right limit
\(\lim_{x \to 1^+} (2x + 1)\)
Function value
\(f(1) = 1^2\)
Step 1: Calculate left-hand limit

As \(x \to 1^-\), we use \(f(x) = x^2\):

\(\lim_{x \to 1^-} f(x) = \lim_{x \to 1^-} x^2 = 1^2 = 1\)

Step 2: Calculate right-hand limit

As \(x \to 1^+\), we use \(f(x) = 2x + 1\):

\(\lim_{x \to 1^+} f(x) = \lim_{x \to 1^+} (2x + 1) = 2(1) + 1 = 3\)

Step 3: Find f(1)

Since \(x = 1\) satisfies \(x \leq 1\), we use the first piece:

\(f(1) = 1^2 = 1\)

Step 4: Compare values and determine continuity

\(\lim_{x \to 1^-} f(x) = 1\)

\(\lim_{x \to 1^+} f(x) = 3\)

Since the left and right limits are different, \(\lim_{x \to 1} f(x)\) does not exist

Therefore, the function is discontinuous at \(x = 1\)

Key Notes:

• Jump discontinuities occur when function pieces meet at different values

• Left and right limits exist but are not equal

• No way to redefine the function to make it continuous

The function has a jump discontinuity at \(x = 1\).
Final answer:

The function is discontinuous at \(x = 1\) because \(\lim_{x \to 1^-} f(x) = 1 \neq \lim_{x \to 1^+} f(x) = 3\). This is a jump discontinuity.

Applied rules:

• One-sided limits: Use appropriate piece for each side

• Jump discontinuity: Different one-sided limits

• Limit existence: Both sides must approach the same value

5 Making function continuous
Exercise 5
Find the value of k that makes the function continuous at x = 2:
\(f(x) = \begin{cases} x^2 + k & \text{if } x < 2 \\ 3x - 1 & \text{if } x \geq 2 \end{cases}\)
Definition:

Continuous extension: Choosing parameters to satisfy continuity conditions.

Parameter determination: Set \(\lim_{x \to a^-} f(x) = \lim_{x \to a^+} f(x) = f(a)\) to find parameter values.

Method for parameter determination:
  1. Calculate \(\lim_{x \to a^-} f(x)\) in terms of the parameter
  2. Calculate \(\lim_{x \to a^+} f(x)\) and f(a)
  3. Set the limits equal to each other and solve for the parameter
  4. Verify the solution makes the function continuous
Left limit
\(\lim_{x \to 2^-} (x^2 + k)\)
Right limit
\(\lim_{x \to 2^+} (3x - 1)\)
Function value
\(f(2) = 3(2) - 1\)
Step 1: Calculate left-hand limit

As \(x \to 2^-\), we use \(f(x) = x^2 + k\):

\(\lim_{x \to 2^-} f(x) = \lim_{x \to 2^-} (x^2 + k) = 2^2 + k = 4 + k\)

Step 2: Calculate right-hand limit and f(2)

As \(x \to 2^+\), we use \(f(x) = 3x - 1\):

\(\lim_{x \to 2^+} f(x) = \lim_{x \to 2^+} (3x - 1) = 3(2) - 1 = 5\)

Also, \(f(2) = 3(2) - 1 = 5\) (since \(x \geq 2\))

Step 3: Set left limit equal to right limit

For continuity: \(\lim_{x \to 2^-} f(x) = \lim_{x \to 2^+} f(x)\)

So: \(4 + k = 5\)

Therefore: \(k = 1\)

Step 4: Verify the solution

With \(k = 1\):

\(\lim_{x \to 2^-} f(x) = 4 + 1 = 5\)

\(\lim_{x \to 2^+} f(x) = 5\)

\(f(2) = 5\)

Since all three values are equal, the function is continuous at \(x = 2\)

Key Notes:

• Parameter problems require setting limits equal for continuity

• Always verify your solution by checking all conditions

• Continuous extension makes piecewise functions smooth

\(k = 1\) makes the function continuous at \(x = 2\).
Final answer:

When \(k = 1\), the function is continuous at \(x = 2\) because \(\lim_{x \to 2^-} f(x) = \lim_{x \to 2^+} f(x) = f(2) = 5\).

Applied rules:

• Parameter solving: Set conditions equal to find parameter values

• Continuity equation: Left limit = Right limit = Function value

• Solution verification: Always check final answer

Complete Guide to Continuity at a Point
\(\lim_{x \to a} f(x) = f(a)\)
Continuity Definition
Key definitions:

Continuity at a point: A function f is continuous at x = a if and only if all three conditions are satisfied:

1. \(f(a)\) exists (the function is defined at a)

2. \(\lim_{x \to a} f(x)\) exists (the limit exists at a)

3. \(\lim_{x \to a} f(x) = f(a)\) (limit equals function value)

Continuity on an interval: A function is continuous on an interval if it's continuous at every point in the interval

Complete methodology:
  1. Check function definition: Verify f(a) exists
  2. Calculate the limit: Find \(\lim_{x \to a} f(x)\)
  3. Compare values: Check if \(\lim_{x \to a} f(x) = f(a)\)
  4. Classify discontinuity: If not continuous, identify the type
Tip 1: For polynomials, continuity is guaranteed everywhere.
Tip 2: Rational functions are discontinuous where denominator equals zero.
Tip 3: For piecewise functions, always check the boundary points.
Tip 4: Removable discontinuities can sometimes be "fixed" by redefining the function.
Common errors: Forgetting to check all three conditions, misidentifying the function piece to use, not considering one-sided limits for piecewise functions.
Exam preparation: Memorize the three conditions for continuity, practice with piecewise functions, understand different types of discontinuities.
Properties of Continuous Functions:

• If f and g are continuous at x = a, then f + g, f - g, fg are continuous at x = a

• If f and g are continuous at x = a and g(a) ≠ 0, then f/g is continuous at x = a

• If f is continuous at x = a and g is continuous at f(a), then g ∘ f is continuous at x = a

• Polynomials are continuous everywhere

• Rational functions are continuous except where denominator is zero

Types of Discontinuities:

Removable: \(\lim_{x \to a} f(x)\) exists but ≠ f(a) or f(a) undefined

Jump: \(\lim_{x \to a^-} f(x)\) and \(\lim_{x \to a^+} f(x)\) exist but are different

Infinite: At least one one-sided limit is ±∞

Oscillating: Function oscillates infinitely near the point

Applications of Continuity:

• Intermediate Value Theorem: If f is continuous on [a,b] and N is between f(a) and f(b), then there exists c in (a,b) such that f(c) = N

• Extreme Value Theorem: Continuous functions on closed intervals achieve maximum and minimum values

• Real-world modeling: Physical processes are often modeled with continuous functions

Questions & Answers

Question: I'm confused about why we need all three conditions for continuity. Why isn't just having the limit exist enough?

Answer: Great question! The three conditions serve distinct purposes:

  • Condition 1 (f(a) exists): Ensures the function is actually defined at the point of interest. Without this, we're talking about continuity at a point that's not even in the domain.
  • Condition 2 (limit exists): Ensures the function approaches the same value from both sides.
  • Condition 3 (limit equals function value): Ensures the function "lands" where it's supposed to go.

Consider \(f(x) = \frac{x^2-1}{x-1}\) at x=1. The limit as x→1 exists and equals 2, but f(1) is undefined because of division by zero. This is a removable discontinuity - the function approaches 2 but doesn't reach it at x=1.

All three conditions together ensure the function has no breaks, jumps, or holes at the specific point.

Question: How do I quickly identify which type of discontinuity I'm dealing with in a piecewise function?

Answer: Follow this systematic approach:

  • Step 1: Calculate both one-sided limits at the boundary point
  • Step 2: Find the function value at that point
  • Step 3: Compare results:

Jump discontinuity: Both one-sided limits exist but are different

Removable discontinuity: One-sided limits exist and are equal, but differ from f(a) or f(a) is undefined

Infinite discontinuity: At least one one-sided limit is infinite

For example, if \(\lim_{x \to a^-} f(x) = 3\) and \(\lim_{x \to a^+} f(x) = 5\), you have a jump discontinuity regardless of f(a).

Question: Can a function be continuous at its endpoints? What about on a closed interval?

Answer: Yes, but with a modification to the definition:

For a function defined on a closed interval [a,b], continuity at the endpoints is defined using one-sided limits:

  • At x = a: f is continuous if \(\lim_{x \to a^+} f(x) = f(a)\) (right-continuous)
  • At x = b: f is continuous if \(\lim_{x \to b^-} f(x) = f(b)\) (left-continuous)
  • On the interval [a,b]: f is continuous if it's continuous at every point in (a,b), right-continuous at a, and left-continuous at b

This allows us to apply important theorems like the Intermediate Value Theorem and Extreme Value Theorem to functions on closed intervals.

For example, f(x) = √x is continuous on [0,∞) because it's right-continuous at x=0.

Question: How do I find the value of a parameter that makes a piecewise function continuous? I always struggle with these problems.

Answer: These problems follow a consistent pattern:

  1. Identify the critical point: Where the function changes definition
  2. Calculate one-sided limits: In terms of the parameter
  3. Set the limits equal: This ensures the overall limit exists
  4. Solve for the parameter: This gives you the value needed
  5. Verify: Check that the limit equals the function value

For example, if f(x) = {x+k for x<2, 3x-1 for x≥2}, then:
\(\lim_{x \to 2^-} f(x) = 2+k\) and \(\lim_{x \to 2^+} f(x) = 5\)
Setting them equal: 2+k = 5, so k = 3

The key insight is that continuity requires the "pieces" to meet smoothly at the boundary.

Question: What's the practical significance of continuity in real-world applications?

Answer: Continuity models real-world phenomena that change smoothly:

  • Temperature changes: Temperature doesn't jump instantaneously
  • Population growth: Populations change gradually over time
  • Electrical circuits: Current and voltage are typically continuous
  • Physical motion: Position and velocity of moving objects

Discontinuities represent abrupt changes like switches turning on/off, collisions, or phase changes. Understanding continuity helps predict system behavior and ensures mathematical models accurately reflect reality.

The Intermediate Value Theorem (which requires continuity) guarantees that if temperature goes from 20°C to 30°C, it must pass through 25°C somewhere in between.