Solved Exercises on Estimating Limits from Graphs in Differential Calculus

Master graphical limit analysis: visual estimation, point behavior, and graphical interpretation through these 5 detailed exercises.

Graphical Limit Analysis
\(\lim_{x \to a} f(x) = L\)
Visual Limit Definition
Key Definitions:

Graphical Limit: The y-value that the function approaches as x approaches a from both sides

Hole (Open Circle): Point where function is undefined but limit may exist

Jump Discontinuity: Different left and right limits

Infinite Discontinuity: Function increases/decreases without bound

Graphical Analysis Steps:
  1. Locate x = a: Find the vertical line at the point of interest
  2. Approach from left: Trace curve as x approaches a from the left
  3. Approach from right: Trace curve as x approaches a from the right
  4. Compare values: Check if left and right approaches yield same y-value
  5. Consider function value: Note if f(a) equals, differs from, or is undefined compared to the limit
Tip 1: The limit exists if both sides approach the same y-value, regardless of f(a)
Tip 2: Open circles indicate undefined points, closed circles indicate defined points
Tip 3: Vertical asymptotes indicate infinite limits
Tip 4: Oscillating behavior near a indicates limit does not exist
Key Properties: Limit exists iff left and right limits exist and are equal
Applications: Understanding function behavior, continuity, derivatives
Essential Observations:

• Removable discontinuity: Hole in graph where limit exists but f(a) is undefined

• Jump discontinuity: Different left and right limits

• Infinite limit: Curve approaches vertical asymptote

• Oscillating limit: Function oscillates infinitely near point

Solution: Exercises 1 to 3
1 Continuous Function Limit
Exercise 1
Estimate:
limx→2 f(x)
from the graph of a continuous function passing through (2, 3)
Definition:

Continuous Function: No breaks, jumps, or holes in the graph

Graphical Analysis:
  1. Locate x = 2 on the x-axis
  2. Follow the curve from the left toward x = 2
  3. Follow the curve from the right toward x = 2
  4. Observe the y-values being approached
Step 1: Locate the point of interest

Find the vertical line x = 2

The function passes smoothly through the point (2, 3)

Step 2: Analyze left-side approach

As x approaches 2 from the left (x → 2⁻), trace the curve

The y-values approach 3

Step 3: Analyze right-side approach

As x approaches 2 from the right (x → 2⁺), trace the curve

The y-values approach 3

Step 4: Compare approaches

limx→2⁻ f(x) = 3 and limx→2⁺ f(x) = 3

Both one-sided limits equal 3

Step 5: Determine the limit

Since both one-sided limits exist and are equal, limx→2 f(x) = 3

Also, f(2) = 3, so the function is continuous at x = 2

limx→2 f(x) = 3
Final answer:

The limit equals 3 since the function is continuous at x = 2

Applied rules:

• Continuity property: For continuous functions, limit equals function value

• Two-sided limit: Exists when both one-sided limits exist and are equal

• Graphical estimation: Trace curve behavior near the point

2 Removable Discontinuity
Exercise 2
Estimate:
limx→1 f(x)
from a graph where f(1) is undefined (open circle at (1, 4)) but the curve approaches (1, 4) from both sides
Definition:

Removable Discontinuity: Function has a hole at a point, but limit exists

Step 1: Identify the discontinuity

There's an open circle at (1, 4), indicating f(1) is undefined

However, the curve approaches this point from both sides

Step 2: Analyze left-side approach

As x approaches 1 from the left, follow the curve

The y-values get arbitrarily close to 4

limx→1⁻ f(x) = 4

Step 3: Analyze right-side approach

As x approaches 1 from the right, follow the curve

The y-values get arbitrarily close to 4

limx→1⁺ f(x) = 4

Step 4: Compare one-sided limits

Both left and right limits equal 4

Even though f(1) ≠ 4 (or is undefined), the limit exists

Step 5: Determine the limit

limx→1 f(x) = 4

This is a removable discontinuity because we could define f(1) = 4 to make the function continuous

limx→1 f(x) = 4 (removable discontinuity at x = 1)
Final answer:

The limit exists and equals 4, despite f(1) being undefined

Applied rules:

• Limit independence: Limit value is independent of function value at the point

• Removable discontinuity: Limit exists but differs from or is undefined at the point

• Open circle: Indicates point is not included in the function

3 Jump Discontinuity
Exercise 3
Estimate:
limx→0 f(x)
from a graph showing a jump at x = 0 where left limit is 2 and right limit is 5
Definition:

Jump Discontinuity: Left and right limits exist but are not equal

Step 1: Locate the jump point

Find x = 0 where there's a visible jump in the graph

The function has different behaviors on each side of x = 0

Step 2: Analyze left-side approach

As x approaches 0 from the left (x → 0⁻), trace the lower portion of the graph

The y-values approach 2

limx→0⁻ f(x) = 2

Step 3: Analyze right-side approach

As x approaches 0 from the right (x → 0⁺), trace the upper portion of the graph

The y-values approach 5

limx→0⁺ f(x) = 5

Step 4: Compare one-sided limits

limx→0⁻ f(x) = 2 ≠ 5 = limx→0⁺ f(x)

The one-sided limits are different

Step 5: Determine if limit exists

Since the left and right limits are not equal, limx→0 f(x) does not exist

This is called a jump discontinuity

limx→0 f(x) = does not exist (jump discontinuity)
Final answer:

The limit does not exist due to different left and right limits

Applied rules:

• Jump discontinuity: Occurs when one-sided limits exist but are unequal

• Limit non-existence: Two-sided limit fails when one-sided limits differ

• Graphical identification: Visible jump indicates different one-sided behaviors

Solution: Exercises 4 to 5
4 Infinite Limit
Exercise 4
Estimate:
limx→3 f(x)
from a graph showing a vertical asymptote at x = 3, where the function increases without bound as x approaches 3 from both sides
Definition:

Infinite Limit: Function grows without bound as x approaches a value

Step 1: Identify the vertical asymptote

Locate the vertical line x = 3 where the function shoots upward

The curve approaches this line but never touches it

Step 2: Analyze left-side approach

As x approaches 3 from the left (x → 3⁻), trace the curve

The y-values increase without bound (approach +∞)

limx→3⁻ f(x) = +∞

Step 3: Analyze right-side approach

As x approaches 3 from the right (x → 3⁺), trace the curve

The y-values also increase without bound (approach +∞)

limx→3⁺ f(x) = +∞

Step 4: Determine the two-sided limit

Although both one-sided limits approach infinity, infinity is not a finite value

By definition, when a limit equals ±∞, we say the limit does not exist in the traditional sense

Step 5: Describe the behavior

We write: limx→3 f(x) = +∞

This describes the behavior but indicates the limit does not exist as a finite number

limx→3 f(x) = +∞ (limit does not exist as a finite value)
Final answer:

The function increases without bound; limit is infinite

Applied rules:

• Infinite limit notation: Describes unbounded growth behavior

• Vertical asymptote: Indicates where function becomes unbounded

• Limit existence: Technically, infinite limits do not exist as finite values

5 Oscillating Behavior
Exercise 5
Estimate:
limx→0 f(x)
from a graph showing rapid oscillations near x = 0, where the function oscillates between -1 and 1 infinitely often as x approaches 0
Definition:

Oscillating Function: Function that continues to fluctuate between values as x approaches a

Step 1: Observe the oscillatory pattern

As x gets closer to 0, the function oscillates more rapidly between -1 and 1

No matter how close to 0 we get, oscillations continue

Step 2: Analyze the behavior as x approaches 0

The function doesn't settle down to approach any particular y-value

It keeps oscillating between -1 and 1

Step 3: Attempt to identify a limit

For a limit to exist, the function must get arbitrarily close to a single value

Since the function continues to oscillate, no single value is approached

Step 4: Apply the formal definition

For any proposed limit L, we cannot find a small interval around L that contains all function values for x sufficiently close to 0

The function keeps escaping to different values

Step 5: Conclude about the limit

Since the function does not approach a single value, the limit does not exist

This is an example of oscillatory behavior preventing limit existence

limx→0 f(x) = does not exist (oscillating behavior)
Final answer:

The limit does not exist due to persistent oscillations

Applied rules:

• Oscillation prevention: Persistent oscillation prevents limit existence

• Limit requirement: Function must approach a single value

• Graphical identification: Rapid oscillations near point indicate potential limit failure

Questions & Answers

Question: How can I tell from a graph if a limit exists or not? What visual cues should I look for?

Answer: Look for these key visual cues:

  • Continuous curve: If the function flows smoothly through the point, the limit exists and equals the function value
  • Hole with smooth approach: If there's an open circle but the curve approaches the same value from both sides, the limit exists (removable discontinuity)
  • Jump or break: If the curve approaches different y-values from left and right, the limit does not exist
  • Vertical asymptote: If the curve shoots up/down toward infinity, the limit is infinite (does not exist as a finite value)
  • Rapid oscillation: If the function keeps fluctuating near the point, the limit does not exist

The key is to trace the path from both sides and see if they meet at the same y-value!

Question: In Exercise 2, why does the limit exist even though f(1) is undefined? Isn't that contradictory?

Answer: Not contradictory at all! This is a fundamental concept:

  • Limit concept: The limit describes the behavior of f(x) AS x approaches a, not necessarily AT x = a
  • Independence: limx→a f(x) is completely independent of f(a)
  • Removable discontinuity: When limx→a f(x) exists but differs from or is undefined at f(a), we call it removable

Think of it this way: "What is the function heading toward?" is different from "What is the function value?" The function can head toward a value even if that specific point is missing.

Question: How do I distinguish between an open circle and a closed circle on a graph, and what does each mean for limits?

Answer: Here's how to interpret circle types:

  1. Open circle (○): Indicates the function is NOT defined at that point - f(a) is undefined
  2. Closed circle (●): Indicates the function IS defined at that point - f(a) equals the y-coordinate of the point

For limits:

  • Open circles don't prevent limits from existing (see Exercise 2)
  • Closed circles may or may not match the limit value
  • For continuity, we need the limit to equal the function value (closed circle at the limit value)

The limit depends only on the function's behavior NEAR the point, not AT the point!